GC–MS study of thermochemical conversion of guaifenesin in the presence of 1-butyl-3-methylimidazolium-based ionic liquids

Research on Chemical Intermediates - Thermochemical conversion of guaifenesin was performed in the presence of 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4] ionic liquid at...     

离子液体介质中钌纳米粒子催化苯乙酮及其衍生物的不对称加氢反应

采用水溶性三(间-磺酸钠苯基)膦(TPPTS)作稳定剂, 在离子液体1-丁基-3-甲基-咪唑四氟硼酸盐([BMIM]BF4)或1-丁基-3-甲基-咪唑对甲基苯磺酸盐([BMIM][p-CH3C6H4SO3])介质中用氢气还原RuCl3·3H2O, 得到钌纳米粒子. 将此钌纳米粒子与(1S, 2S)-1,2-二苯基乙二胺(简称(1S, 2S)-DPEN)、KOH在离子液体/异丙醇介质中原位生成一种不对称加氢催化剂, 用于催化苯乙酮及其衍生物的不对称加氢反应. 实验结果表明, 离子液体介质中的纳米钌催化剂体系具有良好的催化活性和对映选择性. 在优化反应条件下, 催化苯乙酮获得了100%的转化率和79.1%的对映选择性. 并且产物经正己烷萃取后, 含有钌纳米粒子的离子液体可以循环使用.     

Structures of ionic liquids with different anions studied by infrared vibration spectroscopy

We investigated the structures of ionic liquids (1-butyl-3-methylimidazolium iodide [BMIM][I] and 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF4]) and their aqueous mixtures using attenuated total reflection (ATR) infrared absorption and Raman spectroscopy. The ATR spectrum in the CHx (x = 1, 2, 3) vibration region from 2800 to 3200 cm-1 was very different between [BMIM][BF4] and [BMIM][I] even though all the spectral features in this region were from the butyl chain and the imidazolium ring of the same cation. The spectrum did not change appreciably irrespective of the water concentration for [BMIM][BF4], whereas the spectrum from [BMIM][I] showed significant changes as the water concentration was increased, especially in CH-vibration modes from the imidazolium ring. For very diluted solutions both aqueous mixtures of [BMIM][I] and [BMIM][BF4] showed very similar spectra. Mixing of [BMIM][I] with heavy water (D2O) facilitated the isotopic exchange of the proton attached to the most acidic carbon of the imidazolium ring into deuterium from D2O, whereas even prolonged exposure to D2O did not induce any isotopic exchange for [BMIM][BF4]. Raman spectra around 600 cm(-1) indicative of the butyl chain conformation also changed differently as the water concentration was increased between [BMIM][I] and [BMIM][BF4]. These differences are considered to come from the variation in the position of the anion, where I- is expected to be closer to the C(2) hydrogen of the imidazolium cation and interacting more specifically as compared to BF(4-).     

The thermochemistry of solvation of imidazolium-based ionic liquids in benzene

ABSTRACT

The present work is devoted to the thermochemical study of solvation of ionic liquids (IL) in benzene. The solution enthalpies of 1-ethyl-3-methylimidazolium tricyanomethanide [EMIM][C(CN)₃], 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM][BF₄], 1-hexyl-3-methylimidazolium hexafluorophosphate [HMIM][PF₆], 1-octyl-3-methylimidazolium tetrafluoroborate [OMIM][BF₄], 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [EMIM][NTf₂], 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide [BMIM][NTf₂] and 1-butyl-3-methylimidazolium trifluoromethanesulfonate [BMIM][TfO] in benzene were measured. The solvation enthalpies of imidazolium-based IL were calculated. Molar refractions of imidazolium-based IL form literature data on density and refractive indexes of IL were also calculated. The linear correlation between solvation enthalpy and molar refraction of IL was observed. This correlation can be used to calculate the vaporization enthalpy of imidazolium-based IL from solution calorimetry data.     

Enhanced refolding of lysozyme with imidazolium-based room temperature ionic liquids: Effect of hydrophobicity and sulfur residue

The expression of recombinant proteins in microorganism frequently leads to the formation of insoluble aggregates, inclusion bodies (IBs). Thus, the additional in vitro protein refolding process is required to convert inactive IBs into water-soluble active proteins. This study investigated the effect of sulfur residue and hydrophobicity of imidazolium-based room temperature ionic liquids (RTILs) on the refolding of lysozyme as a model protein in the batch dilution method which is the most commonly used refolding method. When lysozyme was refolded in the refolding buffer containing [BF4]-based RTILs with a systematic variety of alkyl chain on cations varying from two to eight, less hydrophobic imidazolium cations having shorter alkyl chains were effective to facilitate lysozyme refolding. Compared to the conventional refolding buffer, 2 times higher lysozyme refolding yield was obtained in 1-ethyl-3-methylimidazolium tetrafluoroborate ([EMIM][BF4]) containing refolding buffer. The refolding yield of lysozyme was even more increased by 2.5 times when 1-butyl-3-methylimidazolium methylsulfate ([BMIM][MS]) containing sulfur residue on anion was used. The sulfur residue in [BMIM][MS] is supposed to improve the refolding yield of lysozyme which has 4 intramolecular disulfide bonds. For dilution-based refolding of lysozyme, the optimum concentrations of RTILs in refolding buffer were found to be 1.0 M [EMIM][BF4] and 0.5 M [BMIM][MS], respectively. The optimum temperate for dilution-based refolding of lysozyme with RTILs was 4 °C.     

Effect of Cosolvent on Bulk and Interfacial Characteristics of Imidazolium Based Room Temperature Ionic Liquids

Here we report a systematic study on electrical conductivity and surface tension of various concentrated solutions of imidazolium based room temperature ionic liquids (RTILs), viz. 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][ $\hbox {PF}_{6}$ ]) and 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][ $\hbox {BF}_{4}$ ]) in the cosolvents methanol and acetonitrile at 298.15 K. The aim of the investigations was to explore the impact of cosolvents on bulk and interfacial characteristics of imidazolium based RTILs. It was observed that both methanol and acetonitrile mix non-ideally with and enhance the transport parameters of the imidazolium based RTILs. An interesting outcome of the presented work is that the investigated RTILs retain their inherent structural characteristics up to a high dilution limit with cosolvent, and this limit is higher in acetonitrile than in methanol as cosolvent. The findings establish that, in comparison to methanol, acetonitrile is a better cosolvent that can be used for enhancing the transport parameters of imidazolium based RTILs for electrochemical and other applications. The results are explained in light of structure-composition-property relations and ion-ion and ion-cosolvent interactions.     

Dynamically coated silica monolith with ionic liquids for capillary electrochromatography

An ionic liquid, 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF4]) was introduced as dynamic coating of a silica monolithic column for capillary electrochromatography of phenols and nucleoside monophosphates. The run-to-run and column-to-column repeatability of migration time for six phenols were satisfactory on this column with relative standard deviation values less than 0.90 and 4.31%, respectively. Anodic electroosmotic flow (EOF) was observed, which increased with the increase of [BMIM][BF4] concentration within 120 mM and when [BMIM][BF4] concentration was above 120 mM, EOF leveled off due to the saturation of [BMIM][BF4] on the monolith. Efficient separation of phenols and nucleoside monophosphates on this dynamically coated monolithic column was obtained, compared with a dynamically coated fused-silica column and unmodified silica monolithic column. The retention behavior of uncharged phenols is mainly manipulated by hydrophobic interactions due to the presence of butyl groups, and that of nucleoside monophosphates is governed by the electrostatic attraction mechanism based on the interaction between positively charged [BMIM][BF4] moieties and negatively charged phosphate groups. In addition, silica matrix also contributes to the separation resolution.     

Headspace Single Drop Microextraction Using Micellar Ionic Liquid Extraction Solvents

A headspace single drop microextraction (SDME) method using extraction solvents comprised of micellar ionic liquids (ILs) was used to perform the extraction of 17 aromatic compounds from aqueous solution and coupled with liquid chromatography. The effects of various experimental parameters including type of micellar IL extraction solvent, stir rate, extraction time, volume of the microdroplet, and addition of organic solvent were investigated and optimized. Two different micellar solutions were formed by dissolving 1-decyl-3-methylimidazolium bromide ([DMIM][Br]) and sodium dodecyl sulfate (SDS) in 1-butyl-3-methylimidazolium chloride ([BMIM][Cl]). It was observed that the enrichment factors of the 17 studied compounds were all enhanced with the micellar ionic liquid extraction solvent compared to the neat [BMIM][Cl] IL. The highest sensitivity was obtained with the [BMIM][Cl]–[DMIM][Br] micellar solution for polycyclic aromatic hydrocarbons (PAHs) with high molecular weight and fused rings while the [BMIM][Cl]–SDS micellar solution was proven to be more sensitive for smaller, more polar molecules. The detection limits were lower when utilizing the [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] extraction solvents compared to the neat [BMIM][Cl] extraction solvent. The reproducibility of the extraction method at 20 °C using extraction solvents composed of [BMIM][Cl]–SDS and [BMIM][Cl]–[DMIM][Br] ranged from 6.7 to 14.0 and 4.2 to 14.7%, respectively.     

Comparison of photophysical properties of the hemicyanine dyes in ionic and nonionic solvents

The fluorescence properties of 4-[4-(dimethylamino)styryl]-1-n-alkylpyridinium bromide (hemicyanine) dissolved in solvents of different polarities and viscosities (methanol, ethylene glycol, tetra-ethylene glycol, glycerol, benzyl alcohol, pyridine, and two ionic liquids, 1-butyl-3-methylimidazolium tetrafluoroborate, [BMIM]BF4, and 1-butyl-3-methylimidazolium hexafluorophosphate, [BMIM]PF6) were investigated. Significant increase in the fluorescence quantum yield and the fluorescence decay lifetime was observed with the increase in the viscosity of the solvent medium. It is because the intramolecular rotational motion of the molecule becomes more difficult in viscous liquid, which leads to a decrease in the nonradiative decay processes. The fluorescence quantum yields for all of the solutions followed a semiempirical law that depends only on the solvent viscosity. The correlation function C(t) was obtained for each solution by joining fluorescence decay curves measured at different wavelengths. From the fitted results of C(t), we observed the distinctive feature unique to the ionic liquids, in which the correlation functions for ionic liquid solutions are fitted to be biphasic, while they are monophasic for other solvents. The fluorescence maximum of hemicyanine dissolved in these ionic liquids red-shifted following the increase in the excitation wavelength.     

Synthesis of cyano-bridged magnetic nanoparticles using room-temperature ionic liquids

A principally new exploit of ionic liquids as an alternative reaction medium in the synthesis of cyano-bridged coordination-polymer nanoparticles is reported. Stable colloid solutions containing nanoparticles of cyano-bridged molecule-based magnets, M)[Fe(CN)6]2/[RMIM][BF4] (M2+=Ni, Cu, Co) and Fe4[Fe(CN)6]3/[RMIM][BF4] (R=1-butyl (BMIM), 1-decyl (DMIM)), were prepared in the corresponding 1-R-3-methylimidazolium tetrafluoroborate [RMIM][BF4], which acts as both a stabilising agent and a solvent. By varying the length of the N-alkyl chain on the imidazolium cation of [RMIM]+ and the temperature, the growing process can be controlled to produce nanoparticles of different sizes. By studying the magnetic properties of frozen colloids it is shown that the relaxation of magnetisation is strongly influenced by interparticle interactions, which leads to the appearance of spin-glass-like dynamics in these systems.     

Effect of water and organic solvents on the ionic dissociation of ionic liquids

The effect of water and several organic solvents on the density, viscosity, and conductivity of ionic liquids (ILs) 1-n-butyl-3-methylimidazolium hexafluorophosphate ([bmim][PF6]), 1-n-butyl-3-methylimidazolium tetrafluoroborate ([bmim][BF4]), and 1-n-butyl-3-methylimidazolium trifluoroacetate ([bmim][CF3CO2]) was studied at 298.15 K in wide composition ranges. The density, viscosity, and conductivity of the three neat ILs were also determined at various temperatures. Upon the basis of the molar conductivity of the mixtures and that of the neat ILs of the same viscosity, the degree of dissociation of ILs in the solutions was investigated. It can be deduced that the organic solvents enhance the ionic association of the ILs, the effect depending on the solvent dielectric constant, while water promotes dissociation significantly due to its high dielectric constant and its ability to form strong hydrogen bonds with the anions of the ILs.     

Ideal gas solubilities and solubility selectivities in a binary mixture of room-temperature ionic liquids

This study focuses on the solubility behaviors of CO2, CH4, and N2 gases in binary mixtures of imidazolium-based room-temperature ionic liquids (RTILs) using 1-ethyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([C2mim][Tf2N]) and 1-ethyl-3-methylimidazolium tetrafluoroborate ([C2mim][BF4]) at 40 degrees C and low pressures (approximately 1 atm). The mixtures tested were 0, 25, 50, 75, 90, 95, and 100 mol % [C2mim][BF4] in [C2mim][Tf2N]. Results show that regular solution theory (RST) can be used to describe the gas solubility and selectivity behaviors in RTIL mixtures using an average mixture solubility parameter or an average measured mixture molar volume. Interestingly, the solubility selectivity, defined as the ratio of gas mole fractions in the RTIL mixture, of CO2 with N2 or CH4 in pure [C2mim][BF4] can be enhanced by adding 5 mol % [C2mim][Tf2N].     

A new diastereoselective intramolecular electroreductive coupling of unsaturated β-ketoesters and β-ketoamides in ionic liquids at a tin cathode

The diastereoselective intramolecular electroreductive coupling of several β-ketoesters and β-ketoamides has been accomplished at a tin cathode in ionic liquids and isopropanol (9:1). The ionic liquids used are 1-butyl-3-methylimidazolium bromide [BMIM]Br, 1-butyl-3-methylimidazolium tetrafluoroborate [BMIM]BF₄, 1-methoxyethyl-3-methylimidazolium trifluoroacetate [MOEMIM]CF₃COO and 1-methoxyethyl-3-methylimidazolium mesylate [MOEMIM]Ms. This methodology offers a clean and green process for the synthesis of functionalized carbocycles in good yields with excellent stereochemical control at three stereogenic centres.     

Microwave-assisted synthesis of sulfide M2S3 (m = Bi, Sb) nanorods using an ionic liquid

Single-crystalline Bi(2)S(3) and Sb(2)S(3) nanorods have been successfully synthesized by the microwave-assisted ionic liquid method. The starting reagents were Bi(2)O(3) or Sb(2)O(3), HCl, Na(2)S(2)O(3), and ethylene glycol (EG) or ethanolamine, and the ionic liquid used was 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF(4)]). Our experiments showed that the ionic liquid played an important role in the morphology of M(2)S(3) (M = Bi, Sb). Single-crystalline Bi(2)S(3) nanorods could be prepared in the presence of [BMIM][BF(4)]. However, urchinlike Bi(2)S(3) structures consisting of nanorods were formed without using [BMIM][BF(4)]. Single-crystalline Sb(2)S(3) nanorods were obtained in the presence of [BMIM][BF(4)]. However, single-crystalline Sb(2)S(3) nanosheets could be prepared in the absence of [BMIM][BF(4)]. The products were characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), and electron diffraction (ED).     

离子液体[BMIM]Br与[BMIM][BF4]配比浓度对Br-离子电荷转移的调节

利用X射线吸收精细结构光谱(XAFS)及紫外吸收光谱两种方法, 分析了离子液体1-丁基-3-甲基咪唑溴盐([BMIM]Br)中逐渐掺入1-丁基-3-甲基咪唑四氟硼酸盐([BMIM][BF₄])时, Br^-阴离子与咪唑阳离子之间氢键作用及电荷偏移量的改变. 随着[BMIM][BF₄]加入量增多, Br 元素XAFS近边(XANES)显示吸收峰降低, 吸收边位置向低能端位移0.9 eV; 扩展边(EXAFS)算出径向结构显示Br 与近邻原子间平均配位数降低、平均键长增长; 紫外光谱也有明显蓝移减色效应. 这些结果都表明Br₄^-的掺入改变了Br^-与阳离子间的电荷偏移量, 负电荷更多地转移到Br^-上, 量化计算的数据同样支持该结论.     

Synthesis and formation mechanism of nanoneedles and nanorods of manganese oxide octahedral molecular sieve using an ionic liquid

Single-crystalline cryptomelane-type manganese oxide octahedral molecular sieve (OMS-2) nanoneedles and nanorods were prepared by a solution-phase approach in the presence of an ionic liquid 1-n-butyl-3-methylimidazolium tetrafluoroborate ([BMIM]BF4). [BMIM]BF4 can act as a cosolvent, structure-directing agent, and reducing reagent in the reaction system. Based on the redox reaction of MnCl2 and KMnO4 in the mixed solvents of water and [BMIM]BF4, the formation of OMS-2 nanoneedles followed the rolling mechanism with lamellae as an intermediate. However, the direct reaction of KMnO4 with [BMIM]BF4 resulted in the formation of OMS-2 nanorods with diameters as small as 3-6 nm. The formation mechanism of OMS-2 nanostructures was discussed.     

Dramatic Change in Viscosities of Pure Ionic Liquids upon Addition of Molecular Solvents

Viscosities of binary mixtures of pyridinium based ionic liquids (1-butyl pyridinium tetrafluoroborate, [BP][BF₄], 1-butyl 3-methyl pyridinium tetrafluoroborate [3-MBP][BF₄], 1-butyl 4-methyl pyridinium tetrafluoroborate, [4-MBP][BF₄]), and phosphonium based ionic liquids, (tetrabutyl phosphonium alaninate, [TBP][Ala]; tetrabutyl phosphonium valinate, [TBP][Val]) with the molecular solvents, water, methanol and dichloromethane, have been measured at 298.15 K. A Brookfield ultra-rheometer was employed to measure the reported viscosities. The drop in viscosity in the close vicinity of pure ionic liquid is more prominent in polar solvents like water compared to less polar solvents. The temperature dependence of this observation was also studied for binary mixtures of [4-MBP][BF₄] with water in range of 298.15–323.15 K. The Vogel-Fulcher-Tamman (VFT) equation was employed to investigate the temperature dependence of the viscosities of pure pyridinium-based ionic liquids in the temperature range from 298.15–323.15 K.     

Study of the surface properties and surface concentration of ionic liquid–alcohol mixtures

Surface properties for three binary mixtures containing a 1-butyl-3-methylimidazolium thiocyanate ([BMIM][SCN]) and a long-chain alcohol (1-butanol, 1-pentanol and 1-hexanol) were determined by surface tension data at the following temperatures: (298.15, 308.15, 318.15, 328.15 and 338.15) K. The surface tension data over the entire mole fraction range are correlated by the Fu et al.(FLW) and Myers-Scott (MS) models. There is good agreement between the experimental data and the results of correlations for 15 binary systems (the three systems at five temperatures) with an average relative error below 1.5%. In addition, the UNIFAC group contribution method is applied for calculation of activity coefficients of components in solution. Moreover, the relative adsorptions of alcohol at the air/liquid interface are determined using Gibbs adsorption isotherm. The obtained results show that the values of adsorption for mixtures of alcohols/[BMIM][SCN] increase with increasing the alkyl chain length of alcohol and decreasing temperature.     

Microwave-assisted separation of ionic liquids from aqueous solution of ionic liquids

Microwave-assisted separation has been applied to recover ionic liquid (IL) from its aqueous solution as an efficient method with respect to time and energy compared to the conventional vacuum distillation. Hydrophilic ILs such as 1-butyl-3-methylimidazolium tetrafluoroborate ([Bmim][BF(4)]), 1-butyl-3-methylimidazolium trifluoromethanesulfonate ([Bmim][TfO]) and 1-ethyl-3-methylimidazolium methylsulfate ([Emim][MS]) could be recovered in 6 min from the mixture of ILs and water (1:1, w/w) under microwave irradiation at constant power of 10 W while it took at least 240 min to obtain ILs containing same water content (less than 0.5 wt%) by conventional vacuum oven at 363.15 K with 90 kPa of vacuum pressure. Energy consumptions per gram of evaporated water from the homogeneous mixture of hydrophilic ILs and water (1:1, w/w) by microwave-assisted separation were at least 52 times more efficient than those in conventional vacuum oven. It demonstrated that microwave-assisted separation could be used for complete recovery of ILs in sense of time and energy as well as relevant purity.