CuZnAl水滑石衍生催化剂上甲醇水蒸气重整制氢 Ⅱ. 催化剂组成的影响

 以类层柱CuZnAl水滑石为前体,经600 ℃焙烧制备了一系列不同Cu/Zn/Al质量比的催化剂. 在250 ℃、水/甲醇比为1.3和重时空速为3.28 h-1的条件下,考察了Cu/Zn/Al质量比对催化剂甲醇水蒸气重整反应性能的影响. 结果发现,最佳Cu/Zn/Al质量比为36.7/13.4/(17～28). 调变Cu的比例不会改变催化剂物相构成和CuO的还原峰温, Cu含量较低的催化剂由于活性位数目少而甲醇转化率低,而Cu含量过高的催化剂甲醇转化率较差可能是因为Cu/Zn比失调. 较低或较高的Zn含量会对催化剂物相构成产生影响,这是导致甲醇转化率随Zn含量变化的主要原因. 较高的Al含量有利于CuO的分散和增大催化剂的比表面积,因此催化剂上甲醇的转化率明显提高. 另外,所制催化剂的Cu/Zn/Al质量比对产物气体的组成没有影响.     

置换法制备核壳结构Cu/Al复合粉末

在以明胶为保护剂、氟离子为络合剂的水溶液中, 采用Al粉直接置换还原铜盐的方法, 实现了纳米Cu在Al粉表面的快速化学沉积, 制备出核壳结构的Cu/Al复合粉末. 提出了置换反应的机理和历程, 探讨了反应的影响因素. 利用SEM, XRD, EDS, BET等测试手段对复合粉末进行了微观测试和表征. 结果表明: Al粉表面连续、均匀包覆了由晶粒大小约20 nm的Cu纳米颗粒组成的壳层.     

Fe改性工业Cu/Zn/Al催化剂上甲醇水蒸气重整反应制氢的研究

在Fe改性工业Cu/Zn/Al催化剂上进行了甲醇水蒸气重整反应的研究.在常压下考察了Fe含量的变化、反应温度、进料空速对反应的影响规律.反应结果表明,Fe的存在可以促进水煤气变换反应,显著降低产物中的CO含量,从而证明了在Cu/Zn/Al催化剂上甲醇水蒸气重整反应和水煤气变换反应同时发生.     

以类水滑石为前驱体的Cu/Zn/Al/(Zr)/(Y)催化剂制备及其催化CO_2加氢合成甲醇的性能

采用共沉淀法合成了Cu:Zn:Al:Zr:Y原子比分别为2:1:1:0:0、2:1:0.8:0.2:0、2:1:0.8:0:0.2和2:1:0.8:0.1:0.1的Cu/Zn/Al/(Zr)/(Y)类水滑石化合物.将前驱体材料在空气中500°C焙烧后得到复合金属氧化物,并将其用于CO2加氢合成甲醇反应.采用X射线衍射(XRD)、热重(TG)分析、N2吸附、氧化亚氮(N2O)反应吸附、氢气程序升温还原(H2-TPR)和H2/CO2程序升温脱附(H2/CO2-TPD)技术对所制备的样品进行表征.结果表明,Zr和Y的引入使得催化剂BET比表面积大幅增加,金属铜的比表面积和分散度均按以下顺序依次增加:Cu/Zn/AlCu/Zn/Al/ZrCu/Zn/Al/YCu/Zn/Al/Zr/Y,然而,强碱位数目占总碱位数目的比例的变化顺序为:Cu/Zn/AlCu/Zn/Al/YCu/Zn/Al/Zr/YCu/Zn/Al/Zr.活性评价结果揭示CO2转化率取决于金属铜的比表面积,甲醇选择性则随强碱位比例的增加而线性增加.因而,Zr和Y的引入有利于甲醇的合成,Cu/Zn/Al/Zr/Y催化剂上的甲醇收率最高.     

三乙醇胺改性Cu/Zn/Al类水滑石衍生氧化物催化合成气制备低碳醇

采用共沉淀法制备Cu/Zn/Al类水滑石前驱体,并用配体三乙醇胺(TEA)对其进行改性。前驱体经焙烧后成功获得TEA改性的Cu/Zn/Al催化剂。借助XRD、FTIR、H2-TPR、CO-TPD及SEM等方法对催化剂进行表征,并将其应用于合成气制备异丁醇的活性评价反应中。结果表明,TEA的加入能够改变催化剂形貌,使催化剂表面呈松散絮状结构。TEA可使类水滑石前驱体的结构发生膨胀,其焙烧获得的催化剂中有明显的晶格扭曲和晶格缺陷。TEA对催化剂结构的改变有利于Cu/Zn/Al催化剂中CuO组分的氢还原和CO在催化剂表面的化学吸附,从而促进异丁醇的合成。当TEA的添加比例为nTEA/nZn=0.5时,TEA改性的Cu/Zn/Al催化剂的催化效果达到最佳。     

基于层状氢氧化物衍生复合氧载体的生物质化学链气化实验研究

通过低饱和共沉淀法合成了类水滑石结构的层状氢氧化物(Layered Double Hydroxide,LDH)前驱体,经煅烧获得衍生Cu/Al/Zn、Cu/Al/Ni、Cu/Al/Ni/Zn高分散复合氧载体。采用XRD、XRF、H2-TPR、SEM及BET等分析手段对氧载体的结构及反应性能进行了表征,并通过固定床反应器开展了氧载体与生物质化学链气化实验。结果表明,合成的三种前驱体都具有典型的水滑石特征衍射峰,且层板稳定。Cu/Al/Zn前驱体层间厚度为0.264 2 nm,Ni2+引入后,层间距减小。前驱体煅烧后形成的复合氧载体中元素含量与制备试剂基本一致。氧载体中Zn、Ni元素的引入可提升Cu O的反应活性,降低H2还原的反应温度,Zn元素与Cu具有更好的协同作用。Cu/Al/Ni/Zn氧载体在固定床化学链气化中具有较好的碳转化率和气体产率,其碳转化率为82.03%。反应后氧载体比表面积为5.995 m2/g,具有较好的可再生性与抗烧结性,是生物质化学链气化反应较为理想的氧载体。     

结构助剂SiO2、Al2O3对铁基催化剂浆态床F-T合成性能的影响

采用连续共沉淀与喷雾干燥成型技术相结合的方法制备了微球状Fe/Cu/K/SiO2和Fe/Cu/K/Al2O3催化剂，研究SiO2和Al2O3作为结构助剂对铁基催化剂吸附行为、炭化行为及F-T合成反应性能的影响。表征结果表明,与Al2O3相比较，SiO2抑制了H2的吸附，但促进了CO的吸附，有利于催化剂的炭化。催化剂在260℃、1.5MPa、H2/CO=0.67和2000h-1下的浆态床F-T合成反应评价表明，Fe/Cu/K/SiO2催化剂具有较高的F-T合成活性、高的水煤气变换反应（WGS）活性，且其烃产物选择性明显向高炭数方向偏移，而Fe/Cu/K/Al2O3催化剂则表现出较低的F-T合成活性、低的水煤气变换反应（WGS）活性和高的轻质烃选择性。但Fe/Cu/K/Al2O3催化剂比Fe/Cu/K/SiO2催化剂具有更好的运行稳定性。     

完全液相法制备中原料配比对二甲醚合成催化剂结构和性能的影响

利用完全液相法制备了Cu-Zn-Al双功能催化剂,考察了原料配比对催化剂结构和催化CO加氢合成二甲醚反应性能的影响,用XRD,N2吸附,XPS和H2-TPR等方法对催化剂进行了表征.结果表明,在Cu-Zn-Al基二甲醚合成催化剂中,Zn和Al在催化剂表面的竞争富集是主要过程,增加投料中Cu的比例并不能显著增加Cu在催化剂表面的含量,因为在反应环境中,Al也会富集,并且在Cu含量高时富集得更快.当投料组成为n(Cu)∶n(Zn)∶n(Al)=2∶1∶4时,催化剂的体相结构和表面性质最好(Cu晶粒度最小,Cu分散度最高,还原性能最佳,组分间相互作用最强,最可几孔径最大),催化剂的综合性能最好.     

核-壳结构Cu/Al微纳米复合材料与WO3的热反应性能

采用置换法通过对溶液浓度的控制实现了纳米Cu颗粒在微米Al粉表面定量、快速地化学沉积, 制备出核-壳结构的Cu/Al微纳米复合粒子, 并用SEM、EDS和XRD技术进行表征. 在此基础上, 利用DSC 分析了Cu/Al-WO3的热反应性能, 对比了Al-WO3与Cu/Al-WO3在不同化学配比下的热反应历程, 同时分别提出了其相应的反应机理. 实验结果表明, Cu/Al微纳米复合材料与WO3的热反应活性明显高于传统微米级Al粉, 并且在还原剂Cu/Al轻微过量时该热反应达到最佳效果. 通过对Al粉表面改性, 热反应的活化能降低了68.185 kJ·mol-1.     

甲醇POSR制氢的反应网络热力学分析和有效因子的估算

在Cu/ZnO/Al2O3催化剂上对甲醇部分氧化蒸汽重整制备氢气反应的动力学过程进行了研究。在常压和473 K～1 073 K温度范围内对该反应网络中的甲醇部分氧化、甲醇蒸汽重整、甲醇分解和水煤气反应的化学平衡进行了分析。在对这些反应的催化剂Cu/ZnO/Al2O3动力学研究的基础上，根据有效因子的基本概念，考虑催化剂颗粒内的扩散限制，对每个反应沿反应器床层的有效因子进行了估算。     

Dynamics of the gas-phase reactions of chloride ion with fluoromethane: high excess translational activation energy for an endothermic S(N)2 reaction.

Guided ion beam tandem mass spectrometry techniques are used to examine the competing product channels in the reaction of Cl(-) with CH(3)F in the center-of-mass collision energy range 0.05-27 eV. Four anionic reaction products are detected: F(-), CH(2)Cl(-), FCl(-), and CHCl(-). The endothermic S(N)2 reaction Cl(-) + CH(3)F --> CH(3)Cl + F(-) has an energy threshold of E(0) = 181 +/- 14 kJ/mol, exhibiting a 52 +/- 16 kJ/mol effective barrier in excess of the reaction endothermicity. The potential energy of the S(N)2 transition state is well below the energy of the products. Dynamical impedances to the activation of the S(N)2 reaction are discussed, including angular momentum constraints, orientational effects, and the inefficiency of translational energy in promoting the reaction. The fluorine abstraction reaction to form CH(3) + FCl(-) exhibits a 146 +/- 33 kJ/mol effective barrier above the reaction endothermicity. Direct proton transfer to form HCl is highly inefficient, but HF elimination is observed above 268 +/- 95 kJ/mol. Potential energy surfaces for the reactions are calculated using the CCSD(T)/aug-cc-pVDZ and HF/6-31+G(d) methods and used to interpret the dynamics.     

C_(70)与臭氧反应机理的理论研究

用半经验AM1方法研究了C_(70)与臭氧环加成反应的反应机理。采用Berny梯度 法优化得到反应的过滤度，并进行了振动分析确诊。计算结果表明：臭氧在C_(70) 6－6单、双键上的环加成反应均为复杂反应，由三步组成：第一步是O_3分子与C_ (70)的6-6单、双键发生1,3-偶极环加成反应，生成分子臭氧化物（即中间体I）， 6－6双键加成为放热反应，6－6单键加成为吸热反应，活化势垒分别为84.7和181. 2 kJ·mol~(-1)；第二步是中间体I的加成，C－C键断裂，生成两性离子中间体II 的放热反应，其势垒分别为61.3和13.3 kJ·mol~(-1)；第三步是中间体II脱去一 个Q_2分子生成具有环氧结构的C_(70)O，均为放热反应，活化势垒分别为169.3和 101.2 kJ·mol~(-1)；第三步是中间体I脱去一个O_2分子生成具有环氧结构的C_ (70)O，均为放热反应，活化势垒分别为169.3和101.2 kJ·mol~(-1)，从反应机理 和动力学角度解释了6－6双键加成优于6-6双键加成优于6-6双键加成优于6-6单键 加成的原因。O_3分子与C_(70)6-6双键的加成反应是协同且同步进行的，与6－6单 键的加成反应是协同但不同步的过程。     

哒嗪酮-类肟醚菊酯衍生物的合成研究

从2-叔丁基-4,5-二氯哒嗪酮出发,以两种方法合成了中间体2-叔丁基-4-氯-5-(4-溴甲基苯氧)哒嗪酮(3)。3与肟反应合成了含哒嗪酮的苄基肟醚类化合物4a～4l。在相转移催化条件下,3与芳香醛肟反应得到单一的产物4,与芳香酮肟反应则生成4和5的混合物。文中讨论了反应物的空间效应、亲核试剂对该反应区域选择性的影响,并论证了产物的构型。     

Highly stereospecific, palladium-catalyzed cross-coupling of alkenylsilanols

[reaction: see text] Alkenylsilanols bearing methyl ((E)-1 and (Z)-1) or isopropyl ((E)-2 and (Z)-2)) substituents are converted to disubstituted alkenes by a palladium(0)-catalyzed cross-coupling reaction with aryl or vinyl iodides in the presence of tetrabutylammonium fluoride or hydroxide. Yields and stereoselectivities are generally high, and the reaction is compatible with a wide range of functional groups.     

双自由基CF2与O3的反应机理

主要用作致冷剂和发泡剂的氯氟烃（CFCs）是破坏臭氧层的主要物质之一．对氯氟烃类化合物及其降解产物（包括光解、光氧化、化学反应产物等）在大气中行为问题的研究是大气化学研究的重要内容．前人[1-3]从理论和实验两方面研究了自由基与臭氧的反应机制，但是氯氟烃光解过程中     

Ab initio direct dynamics studies on the reaction of H atom with CH3CH2Cl

The multiple channel reaction H + CH(3)CH(2)Cl --> products has been studied by the ab initio direct dynamics method. The potential energy surface information is calculated at the MP2/6-311G(d,p) level of theory. The energies along the minimum energy path are further improved by single-point energy calculations at the PMP4(SDTQ)/6-311+G(3df,2p) level of theory. For the reaction, four reaction channels (one chlorine abstraction, one alpha-hydrogen abstraction, and two beta-hydrogen abstractions) have been identified. The rate constants for each reaction channel are calculated by using canonical variational transition state theory incorporating the small-curvature tunneling correction in the temperature range 298-5000 K. The total rate constants, which are calculated from the sum of the individual rate constants, are in good agreement with the experimental data. The calculated temperature dependence of the branching fractions indicates that for the title reaction, H-abstraction reaction is the major reaction channel in the whole temperature range 298-5000 K.     

Total syntheses of (+/-)-beta-erythroidine and (+/-)-8-oxo-beta-erythroidine by an intramolecular Diels-Alder cycloaddition of a 2-amidoacrolein

[reaction: see text] The total syntheses of (+/-)-beta-erythroidine and (+/-)-8-oxo-beta-erythroidine are described. The tetracyclic ring system of the natural products was quickly assembled by a strategy that features a retrocycloaddition/cycloaddition reaction of an amidodioxin, an intramolecular Heck reaction, and a 6pi-electrocyclic ring closure of a dienoic acid.     

CF3O2自由基和NO反应机理的理论研究

用密度泛函理论(DFT)的B3LYP方法, 分别在6-31G、6-311G、6-311+G(d)基组水平上研究了CF3O2自由基和NO反应机理. 研究结果表明, CF3O2自由基和NO反应存在三条可行的反应通道, 优化得到了相应的中间体和过渡态. 从活化能看, 通道CH3O2+NO→IM1→TS1→IM2→TS2→CF3O+ONO的活化能最低, 仅为70.86 kJ•mol-1, 是主要反应通道, 主要产物是CF3O和NO2. 而通道CH3O2+NO→IM1→TS3→CF3ONO2和CH3O2+NO→TS4→IM3→TS5→IM4→TS6→CF3O+NOO的活化能较高, 故该反应难以进行.     

Acid-catalyzed dehydration of naphthalene-cis-1,2-dihydrodiols: origin of impaired resonance effect of 3-substituents

Acid-catalyzed dehydrations of substituted naphthalene-cis-1,2-dihydrodiols occur with loss of the 1- or 2-OH group to form 2- and 1-naphthols, respectively. Effects of substituents MeO, Me, H, F, Br, I, and CN at 3-, 6-, and 7-positions of the naphthalene ring are consistent with rate-determining formation of β-hydroxynaphthalenium ion (carbocation) intermediates. For reaction of the 1-hydroxyl group the 3-substituents are correlated by the Yukawa-Tsuno relationship with ρ = -4.7 and r = 0.25 or by σ(p) constants with ρ = -4.25; for reaction of the 2-hydroxyl group the 3-substituents are correlated by σ(m) constants with ρ = -8.1. The correlations for the 1-hydroxyl imply a surprisingly weak resonance interaction of +M substituents (MeO, Me) with a carbocation reaction center but are consistent with the corresponding correlation for acid-catalyzed dehydration of 3-substituted benzene-cis-1,2-dihydrodiols for which ρ = -6.9 and r = 0.43. Substituents at the 6- and 7-positions of the naphthalene rings by contrast are correlated by σ(+) with ρ = -3.2 for reaction of the 1-hydroxyl group and ρ = -2.7 for reaction of the 2-hydroxyl group. The unimpaired resonance implied by these substituent effects appears to be inconsistent with a previous explanation of the weak resonance of the 3-substituents in terms of imbalance of charge development and/or nonplanarity of the benzenium ring in the transition state. An alternative possibility is that the adjacent hydroxyl group interferes sterically with conjugation of +M substituents. "Hyperaromaticity" of the arenium ion intermediates does not appear to be a factor influencing this behavior.     

Mechanistic information from low-temperature rapid-scan and NMR measurements on the protonation and subsequent reductive elimination reaction of a (diimine)platinum(II) dimethyl complex

A detailed kinetic study of the protonation and subsequent reductive elimination reaction of a (diimine)platinum(II) dimethyl complex was undertaken in dichloromethane over the temperature range of -90 to +10 degrees C by stopped-flow techniques. Time-resolved UV-vis monitoring of the reaction allowed the assessment of the effects of acid concentration, coordinating solvent (MeCN) concentration, temperature, and pressure. The second-order rate constant for the protonation step was determined to be 15200 +/- 400 M(-1) s(-1) at -78 degrees C, and the corresponding activation parameters are DeltaH = 15.2 +/- 0.6 kJ mol(-1) and DeltaS = -85 +/- 3 J mol(-1) K(-1), which are in agreement with the addition of a proton that results in the formation of the platinum(IV) hydrido complex. The kinetics of the second, methane-releasing reaction step do not show an acid dependence, and the MeCN concentration also does not significantly affect the reaction rate. The activation parameters for the second reaction step were found to be DeltaH = 75 +/- 1 kJ mol(-1), DeltaS = +38 +/- 5 J mol(-1) K(-1), and DeltaV = +18 +/- 1 cm(3) mol(-1), strongly suggesting a dissociative character of the rate-determining step for the reductive elimination reaction. The spectroscopic and kinetic observations were correlated with NMR data and assisted the elucidation of the underlying reaction mechanism.