合成1,2-环十二二酮的新方法

以十二烷二酸（１）为原料,与甲醇酯化生成十二烷二酸二甲酯（２）,收率为８６５％。化合物２经偶联 缩合得１,２ 二三甲基硅氧基环十二烯（３）,收率为６３１％。利用溴氧化化合物３得到１,２ 环十二二酮（４）淡黄色晶体,收率７９％,全过程收率达４３.１％,是合成１,２ 二酮的新方法。目标化合物结构经红外光谱、核磁共振氢谱和碳谱表征确认。     

Studies on pyrazines. 9 . The facile synthesis of pyrazine 1-oxides substituted at C-2 with cyano,methoxycarbonyl and carboxy groups

The peroxysulfuric acid oxidation of 2-cyanopyrazine ( 1 ) gave its 1-oxide 3 (18% yield) and pyrazinecarb-oxamide (8% yield), while that of methyl pyrazinecarboxylate ( 2 ) provided the 1- and 4-oxides in 15 and 7% yields, respectively. On the other hand, pyrazinecarboxylic acid 1-oxide ( 7 ) was prepared by condensation of 2-methylpyrazine 1-oxide ( 8 ) with benzaldehyde followed by oxidative cleavage (47% overall yield).     

Electrosynthesis of adipic acid by undivided cell electrolysis

A preparative method for synthesis of adipic acid in 47% yield was developed. The method is based on cyclohexanol oxidation in an undivided cell on the NiOOH electrode in aqueous alkali. A possibility of the step-by-step process was studied: oxidation of cyclohexanol to cyclohexanone (75% yield) and subsequent oxidation of cyclohexanone to adipic acid (52% yield). The electrosynthesis of adipic acid is accompanied by the formation of minor amounts (up to 10%) of glutaric and succinic acids.     

Nonanol-1 oxidation on nickel oxide electrode with the involvement of active oxygen forms

The process of nonanol-1 oxidation is studied on the nickel oxide electrode with the use of chemically bound active oxygen forms (AOF) electrochemically generated in situ from O₂, H₂O₂, and H₂O. The effect of electrolysis conditions (AOF generation schemes, current density, passed charge) on the yield of pelargonic acid is studied. The oxidation proceeds most efficiently at the current density of 5–10 mA cm^?2 as the theoretical charge is passed in the paired electrolysis mode. The current efficiency with respect to pelargonic acid is 83.7%; the substance yield is 83.8%. In addition to pelargonic acid, several oxidation side-products are found in the electrolyte. Their content increases with the increase in the charge passed as a result of further oxidation of pelargonic acid.     

可再生高价碘试剂4-二氯碘苯甲酸的合成及其氧化性能

以对碘苯甲酸为原料,采用“一锅法”合成高价碘试剂4-二氯碘苯甲酸（1）,其结构经¹H NMR和IR确证。考察了其对取代苯甲醇的氧化性能。结果表明：1对4-(二甲氨基)苄醇的氧化性能最高,收率93%。     

Laboratory kinetic and mechanistic studies on the OH-initiated oxidation of acetone in aqueous solution

The OH-initiated oxidation of acetone in aqueous solution is investigated because of its potential implications in atmospheric chemistry. The UV-spectrum of the transient acetonylperoxy radical was measured. Two characteristic absorption bands of the acetonylperoxy radical spectrum are found in the 220-400 nm wavelength region. The rate constant for the recombination reaction of the acetonylperoxy radical was determined as a function of temperature for the first time in aqueous solution with k(rec,298?K) = (7.3 ± 1.3) × 10(8) M(-1) s(-1), E(A) = 4.5 ± 3.3 kJ mol(-1), and A = (4.7 ± 2.7) × 10(9) M(-1) s(-1). Furthermore, kinetic investigations of the OH-initiated oxidation of methylglyoxal and pyruvic acid were performed with the following results: for methylglyoxal, k(second) = (6.2 ± 0.2) × 10(8) M(-1) s(-1), E(A) = 12 ± 2 kJ mol(-1), and A = (7.8 ± 0.2) × 10(9) M(-1) s(-1); for pyruvic acid (pH = 0), k(second) = (3.2 ± 0.6) × 10(8) M(-1) s(-1), E(A) = 15 ± 5 kJ mol(-1), and A?= (1.1 ± 0.1) × 10(11) M(-1) s(-1); for pyruvate (pH = 6), k(second) = (7.1 ± 2.4) × 10(8) M(-1) s(-1), E(A) = 25 ± 19 kJ mol(-1), and A = (1.5 ± 0.4) × 10(13) M(-1) s(-1). Quantitative product studies were done as a function of the number of laser photolysis pulses for acetone and its oxidation products methylglyoxal, hydroxyacetone, pyruvic acid, acetic acid, and oxalic acid. After the recombination reaction of acetonylperoxy radicals, there are two possible decomposition reactions where the primary products methylglyoxal and hydroxyacetone are formed. From product analysis after a single photolysis laser shot, the ratio of the main product-forming reactions was determined as (A) 30% and (B) 56% for the methylglyoxal formation via channel A to yield two molecules of methylglyoxal and channel B to yield one molecule of methylglyoxal and one molecule of hydroxyacetone. The remaining product can be ascribed to channel C, the radical-retaining channel forming alkoxy radicals with a yield of 14%. Pyruvic acid and acetic acid were found to be the major intermediates estimated with concentrations in the same order of magnitude and a similar time profile, indicating that acetic acid is also a possible oxidation product of methylglyoxal.     

4-氧代-3（4H）-喹唑啉-5-羧酸的合成

以2-氨基-6-甲基苯甲酸为起始原料,通过合环反应生成两种4-氧代-3(4H)-喹唑啉-5-羧酸衍生物(1a, 1b), 1a, 1b分别经高锰酸钾氧化合成了4-氧代-3(4H)-喹唑啉-5-羧酸（2a, 2b）,其结构经¹H NMR, ¹³C NMR和MS表征。研究了投料比｛r［n(高锰酸钾) :n(5-甲基-3(4H)-喹唑啉-4-酮)］｝和反应温度等对收率的影响。结果表明：在最佳反应条件（r=7:1,中性高锰酸钾氧化,于90 ℃反应）下合成2总收率可达66%。     

Studies on pyrazines. 4.. The synthesis of 2-hydroxy-6-phenylpyrazine and its derivatives

This report describes a new method for the preparation of 2-hydroxy-6-phenylpyrazine ( 1 ). Amino acetal 5 was converted to glycyl amino acetal 7 by two steps in excellent yield. Cycliza-tion of 7 to 1 was accomplished in 33% yield by refluxing in acetic acid followed by oxidation with manganese dioxide. Compound 1 was also prepared by hydrolysis of amino- and methoxy-pyrazines 3 and 15 , derived from 2-hydroxy-5-phenylpyrazine ( 2 ) and the 2-amino homologue 4 , respectively, and by decarboxylation of 2-hydroxy-5-phenylpyrazinecarboxylic acid ( 19 ).     

大黄酚和大黄酸的合成

以3-硝基邻苯二甲酸为原料,经脱水、傅克酰基化、还原、重氮化、水解和环合反应合成了大黄酚(6),总收率40.4%。6再经乙酰化、氧化、脱乙酰化反应合成了大黄酸(8),总收率22.3%。6和8的结构经1H NMR表征。     

Oxidation of substituted toluenes with molecular oxygen in the presence of N,N',N' '-trihydroxyisocyanuric acid as a key catalyst

N,N',N' '-Trihydroxyisocianuric acid (THICA) was found to be a very efficient catalyst for the oxidation of alkylbenzenes with dioxygen. Thus, a variety of meta- and para-substituted toluenes bearing an electron-withdrawing substituent such as cyanotoluene, chlorotoluene, and toluic acid under O(2) (1 atm) in the presence of THICA (5 mol %) and Co(OAc)(2) (0.5 mol %) at 100 degrees C were smoothly oxidized to the corresponding benzoic acids in almost quantitative yields. The aerobic oxidation of toluene by THICA was compared with that by N-hydroxyphthalimide. p-Xylene was efficiently oxidized by THICA to telephthalic acid in high yield (over 95%) under mild conditions.     

钨酸催化氧化环己烯合成己二酸

以钨酸/有机酸性添加剂为催化体系, 在无有机溶剂、相转移剂的情况下, 催化30%过氧化氢氧化环己烯合成己二酸. 当钨酸∶有机酸性添加剂∶环己烯∶过氧化氢＝1∶1∶40∶176(摩尔比, 钨酸用量为2.5 mmol)时, 使用有机酸性添加剂考察钨酸的催化性能, 结果表明以钨酸/间苯二酚催化氧化环己烯的催化效果最优, 反应8 h时己二酸分离产率达90.9%、纯度为～100%; 而不使用有机酸性添加剂时, 己二酸分离产率只有72.1%, 产品纯度为96.2%. 当使用磺酸水杨酸、草酸、水杨酸为有机酸性添加剂时, 随反应时间的增加, 己二酸分离产率均升高, 但反应6 h以后, 己二酸分离产率随时间的变化不明显. 当磺酸水杨酸用量为2.5 mmol时, 己二酸分离产率和纯度均较高. 钨酸-磺酸水杨酸催化体系重复使用五次后, 己二酸分离产率仍可达到80.5%.     

S-oxygenation of thiocarbamides II: Oxidation of trimethylthiourea by chlorite and chlorine dioxide

The kinetics of the oxidation of a substituted thiourea, trimethylthiourea (TMTU), by chlorite have been studied in slightly acidic media. The reaction is much faster than the comparable oxidation of the unsubstituted thiourea by chlorite. The stoichiometry of the reaction was experimentally deduced to be 2ClO2- + Me2N(NHMe)C=S + H2O --> 2Cl- + Me2N(NHMe)C=O + SO4(2-) + 2H+. In excess chlorite conditions, chlorine dioxide is formed after a short induction period. The oxidation of TMTU occurs in two phases. It starts initially with S-oxygenation of the sulfur center to yield the sulfinic acid, which then reacts in the second phase predominantly through an initial hydrolysis to produce trimethylurea and the sulfoxylate anion. The sulfoxylate anion is a highly reducing species which is rapidly oxidized to sulfate. The sulfinic and sulfonic acids of TMTU exists in the form of zwitterionic species that are stable in acidic environments and rapidly decompose in basic environments. The rate of oxidation of the sulfonic acid is determined by its rate of hydrolysis, which is inhibited by acid. The direct reaction of chlorine dioxide and TMTU is autocatalytic and also inhibited by acid. It commences with the initial formation of an adduct of the radical chlorine dioxide species with the electron-rich sulfur center of the thiocarbamide followed by reaction of the adduct with another chlorine dioxide molecule and subsequent hydrolysis to yield chlorite and a sulfenic acid. The bimolecular rate constant for the reaction of chlorine dioxide and TMTU was experimentally determined as 16 +/- 3.0 M(-1) s(-1) at pH 1.00.     

2,2,6,6-四甲基哌啶氧自由基/Ca(ClO)2催化氧化甲基葡糖苷制备葡醛酸

采用2,2,6,6-四甲基哌啶氧自由基/Ca(ClO)2体系选择氧化甲基葡萄糖苷(简称甲苷)合成了葡萄糖甲苷酸盐,再用硫酸酸解葡萄糖甲苷酸盐,得到葡萄糖醛酸和副产物硫酸钙。考察了氧化工艺条件对葡萄糖醛酸收率的影响;用pH计监控反应过程,反应中间体和终产物用UV和HPLC检测。结果表明,该体系对甲苷伯羟基的氧化具有较好的催化活性和反应选择性,葡萄糖醛酸收率达到92%,且金属离子易于去除。和传统的淀粉HNO3氧化法工艺相比,该方法具有资源节约、环境友好的特点。     

Nitroimidazoles. IX. Synthesis of 2-acetyl-1-methyl-5-nitroimidazole

Manganese dioxide oxidation of 2-hydroxymethyl-1-methyl-5-nitroimidazole (6) gave 1-methyl-5-nitroimidazole-2-carboxaldehyde (7) in high yield. Reaction of diazomethane with 7 afforded the title compound 1 in low yield. Treatment of ethyl acid malonate with two equivalents of isopropylmagnesium bromide in THF and subsequent addition to 1-methyl-5-nitroimidazole-2-carbonylimidazolide (12) yielded ethyl (1-methyl-5-nitroimidazole-2-carbonyl)acetate (10) in 70% yield. Hydrolysis and decarboxylation of compound 10 gave the desired compound 1 in 97% yield.     

风化煤的化学降解

在Ｍｎ－Ｍｏ催化剂存在下用ＨＮＯ３氧化对风化煤进行了化学降解研究。考察一降解条件，氧化产物收率及组成性质，结果表明，与原煤相比，氧解产物中极性功能团大量增加，极性溶剂中抽提率显著提高。     

2-氯烟酸绿色合成工艺

以烟酸为原料,经双氧水氧化制得N-氧化烟酸（2）; 2经氯化、水解并精制得2-氯烟酸,总收率76.8%,纯度≥99.5%,其结构经¹H NMR和¹³C NMR确证。     

Oxidation of pyrazoles containing the 2-hydroxyethyl group on a NiO(OH) electrode in aqueous alkali

The electrooxidation of pyrazoles containing hydroxyethyl group bound with the pyrazole ring at its N and C atoms (1-(2-hydroxyethyl)pyrazole and (4-(2-hydroxyethyl)pyrazole, respectively) in an undivided cell on a NiO(OH) electrode in aqueous alkali is studied. The oxidation of 1-(2-hydroxyethyl)pyrazole is shown to result in the formation of pyrazole-1-acetic acid with a yield of 80.0%. In the case of 4-(2-hydroxyethyl)pyrazole the process proceeds more exhaustively, leading to the formation of pyrazole-4-carboxylic acid as the major product with a yield of 57.0%. The regularities of these processes are discussed.     

Intramolecular capture of pummerer rearrangement intermediates. I. Synthesis of pyrrolo[2,1-c][1,4]benzothiazines

Treatment of 1-(2-alkylsulfinylphenyl)pyrroles with trifluoroacetic acid in refluxing toluene gives 4-substituted pyrrolo[2,1-c][1,4]benzothiazines in good yield when the alkyl group bears an electron withdrawing substituent on the α-carbon. In the absence of such a group, starting material is recovered. The sulfoxides are prepared by oxidation (mCBPA) of the corresponding sulfide. The sulfides are prepared from 2-aminobenzenethiol either by S-alkylation followed by conversion to the pyrrole using 1,4-dimethoxytetrahydrofuran in glacial acetic acid or by S-alkylation of 1-(2-phenylmercapto)pyrrole followed by oxidation to the sulfoxide.     

Synthesis of gallic acid: Cu(2+)-mediated oxidation of 3-dehydroshikimic acid

With the elaboration of high-yielding, high-titer syntheses of 3-dehydroshikimic acid from glucose using recombinant Escherichia coli, oxidation of this hydroaromatic becomes a potential route for synthesis of gallic acid. Conversion of 3-dehydroshikimic acid into gallic acid likely proceeds via initial enolization of an alpha-hydroxycarbonyl and oxidation of the resulting enediol. 3-Dehydroshikimate enolization in water was catalyzed by inorganic phosphate while Zn(2+) was used to catalyze enolization in acetic acid. Enediol oxidation employed Cu(2+) as either the stoichiometric oxidant or as a catalyst in the presence of a cooxidant. Gallic acid was produced in a yield of 36% when 3-dehydroshikimic acid in phosphate-buffered water reacted for 35 h with H2O2 and catalytic amounts of CuSO(4). 3-Dehydroshikimate-containing, phosphate-buffered culture supernatants reacted with stoichiometric amounts of CuCO(3)Cu(OH)(2) and Cu(x)(H(3-x)(PO4)(2) to give gallic acid in yields of 51% in 5 h and 43% in 12 h, respectively. Solutions of 3-dehydroshikimic acid in acetic acid reacted with stoichiometric amounts of Cu(OAc)(2) to afford a 74% yield of gallic acid in 36 h. Acetic acid solutions of 3-dehydroshikimic acid could also be oxidized by air using catalytic quantities of Cu(OAc)(2). ZnO accelerated these oxidations leading to a 67% yield of gallic acid in 4 h when an acetic acid solution of 3-dehydroshikimic acid was reacted with O(2) and a catalytic amount of Cu(OAc)(2).     

Electrochemical study on the keto-enol tautomerization of p-hydroxyphenylpyruvic acid in aqueous solution

The keto-enol tautomerization of p-hydroxyphenylpyruvic acid (pHPP) in aqueous solutions and the complexation reaction between enolic pHPP and boric acid have been studied by electrochemical techniques including linear sweep voltammetry (LSV), pulse voltammetry, and cyclic voltammetry (CV), combining with UV spectrometry. Electrochemical techniques reveal that in aqueous solution, there are two tautomers of pHPP: enolic form and ketonic form; the former exists mainly in freshly prepared pHPP solution, and the latter exists mainly in equilibrium solution. Both enolic and ketonic pHPP are electroactive. The electrochemical oxidation of enolic pHPP gives rise to two anodic waves, I(a) and II(a), while the electrochemical oxidation of ketonic pHPP only results in the observation of the second wave II(a). The oxidation process I(a) is revealed to be associated with the quasi-reversible, two-electron two-proton oxidation of "C=C"group at the side chain of enolic pHPP, and the oxidation process II(a) is proposed to result from the irreversible oxidation of phenolic hydroxyl group. It is observed that in aqueous solution, enolic pHPP can quickly complex with boric acid to yield enol-borate complex that can also oxidize at a glassy carbon electrode to yield an anodic wave.