MnO2掺杂金属陶瓷惰性阳极的制备及性能研究

以氧化铝-金属复合材料为基质, 通过掺杂MnO2制备一种新型电解铝所用的陶瓷惰性阳极, 并对添加MnO2的阳极材料的综合性能进行了考察. 研究了MnO2对烧结性能的影响, 并对样品进行了静态腐蚀实验的研究, 测定了样品在500~1000 ℃下电导率随温度的变化. 研究结果表明, 添加MnO2有利于材料烧结且能改善材料的物化性能: 烧结样品晶粒生长完整, 致密度高; 耐高温和抗冰晶石熔盐腐蚀性能好, 平均腐蚀速率降为12.32 mm/year; 导电性能稳定、良好, 具有半导体的导电性质, 电导率随温度的升高而增大, 测得850 ℃时样品的电导率为67 S/cm.     

钛酸盐红色长余辉陶瓷的制备与表征

以高温熔融法制备了钛酸盐为基质的红色长余辉陶瓷,研究氧化物及稀土氧化物改变对陶瓷发光性能的影响,用荧光光谱仪及X射线衍射仪对所制备的陶瓷试样进行表征.结果表明:添加适当的氧化物可获得均匀的玻璃并显著改善陶瓷的发光性能,共掺杂稀土离子不改变Ca0.8Zn0.2TiO3:Pr3+的发光机制.其发射峰为位于617 nm的窄带峰,对应于Pr3+的1D2→3H4的跃迁发射.添加的氧化物及稀土氧化物不改变基质的晶格,主晶相为CaTiO3.     

La, Ce对Ge-W-Co多金属氧酸盐的气相扩渗及导电性研究

报道了采用多元渗的方法对K6HCoGeW11O40氧酸盐进行了稀土的气相扩渗. 根据氧酸盐的TG-DTA测试结果确定了稀土扩渗的温度, 扩渗后的化合物经ICP分析测试表明, 微量的La, Ce可渗入到试样中; 对其XPS的测试结果证实La, Ce与氧酸盐中其他组分有键合作用; 对比扩渗前后化合物的XRD谱图发现, 扩渗前后化合物的衍射峰有明显的不同, 预期得到了新的化合物. 利用四电极法和交流阻抗法对扩渗前后样品的导电性能进行了测试, 结果表明扩渗后试样的电导率比扩渗前的电导率提高了2.95×103倍. 对扩渗后样品的变温交流阻抗谱分析显示, 250 ℃时其导电类型发生了转变.     

稀土氧化物对焊条熔敷金属抗高温硫化腐蚀机制的研究

通过在焊条药皮中分别添加稀土氧化物La2O3及CeO2，研究其对焊条熔敷金属在含硫气氛中腐蚀性能的影响。并在此基础上，进一步分析了稀土氧化物对焊缝金属抗高温硫化腐蚀的作用机制，结果表明：稀土氧化物在焊条药皮中的加入使熔敷金属抗高温硫化腐蚀性能有显著提高，添加La2O3的焊条熔敷金属比添加CeO2的焊条熔敷金属具有更好的抗高温硫化腐蚀性能。提高焊缝金属抗高温硫化腐蚀性能的机制，与稀土元素在焊缝组织中的分布、减少内硫化的加速腐蚀过程相关。     

稀土氧硫化物上的羰基硫水解反应

研究了一种新型的羰基硫水解催化剂--稀土氧硫化物.考察了稀土系列氧化物硫化后的水解活性,发现其活性顺序为La≈Pr≈Nd≈Sm>Eu>Ce>Gd≈Ho>Dy>Er.XRD物相分析表明,各种稀土氧化物经水合及硫化后呈现出不同的物相变化特性,稀土氧硫化物是COS水解的活性物质.在氧硫化镧和氧硫化钕催化剂上研究了O₂和SO₂对羰基硫水解反应的影响,与传统的氧化铝基和氧化钛基水解催化剂相比,稀土氧硫化物显示出良好的抗氧化性能,而SO₂对催化活性的影响是可逆的.     

含稀土氨合成催化剂还原的研究

氨合成铁催化剂中添加稀土氧化物已有不少报道,有的活性有所提高.我们通过添加稀土. 调整催化剂组成和改进制工艺得到几种活性较高,而且是非常容易还原的催化剂.本文的目的是研究稀土氧化物对催化剂还原性能的影响及几种活性较高容易还原的含稀土催化剂的本征还原动力学.     

连铸结晶器喂稀土处理的碳锰钢夹杂物研究

为研究钢中添加稀土带来的夹杂物问题,采用金相夹杂物评级、电解夹杂分析以及电子探针和扫描电镜观察分析,对经稀土处理的微合金化碳锰钢夹杂物进行了研究.结果表明,采用铝脱氧和RH真空充分脱气的微合金化碳锰钢,经连铸结晶器喂稀土处理后,钢中的A,B,C,D类夹杂物分别不大于1.0级、1.5级、0.5级、1.5级,氧化物夹杂总量约为0.0030%.试验钢中主要形成球状稀土硫化物,同时还形成有链状"稀土硫化物包围氧化铝"的复合夹杂物,而稀土氧化物难以生成.     

镨对锌单取代杂多化合物气相扩渗的电性能及XPS研究

报道了采用气相法对K7ZnBW11O39配合物进行Pr的化学热扩渗, 研究了材料的电性能, 并结合XPS等表征手段对其导电机理加以了初步的分析. 通过配合物的TG-DTA分析确定了扩渗温度,扩渗后材料的ICP分析测试表明, 微量Pr可渗入到试样中. 经XRD分析发现, 扩渗后,化合物的晶型发生了改变, 得到了新的化合物. 利用四电极法和交流阻抗法对扩渗前后样品的导电性能进行了测试, 结果表明材料的导电性能发生了十分显著的变化, 扩渗后试样的电导率为2.98×10-2 S*cm-1, 比扩渗前的电导率3.54×10-6 S*cm-1提高了约104倍. XPS能谱及交流阻抗谱分析显示可能存在氧空穴导电.     

多壁碳纳米管/溴/聚苯乙炔三元复合材料导电性能的研究

通过机械共混和溶液共混制备了多壁碳纳米管(MWNTs)/溴/聚苯乙炔(PPA)三元复合材料, 复合材料表现出良好的导电性能, 电导率为10 S/m, 达到掺溴MWNTs的导电水平. 通过固体紫外光谱、XPS和SEM分析了复合材料中MWNTs、溴与PPA三者之间的相互作用, 研究了独立导电单元的形成, 以及导电单元对电导率提高所起的作用. 结果表明, 当MWNTs含量较低时, MWNTs和PPA之间的溴转移导致复合材料电导率降低; MWNTs含量较高时, 独立导电单元的数目增多, 复合材料的电导率随之大幅提高.     

稀土对Al2O3陶瓷烧结温度、显微组织和力学性能的影响

研究了Y2O3, La2O3 等稀土氧化物对Al2O3陶瓷烧结温度、力学性能和显微组织的影响. 结果表明, 添加稀土氧化物可以降低Al2O3陶瓷的烧结温度, 改善显微组织, 提高力学性能. 添加复合稀土氧化物(Y2O3+La2O3)后, Al2O3陶瓷的抗弯强度和断裂韧性分别提高1.8倍和2.08倍. 其性能提高的主要原因是稀土氧化物对细晶强化、净化界面、固溶强化、自增韧补强等作用的贡献.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.