首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 63 毫秒
1.
采用在线热裂解气相色谱-质谱法(Py-GC-MS)法研究了桔梗浸膏热裂解性质.在氦气氛围中,将桔梗浸膏分别在不同温度下进行热裂解,并以气相色谱-质谱法(GC-MS)对其裂解产物进行定性和半定量分析,并用桔梗浸膏进行了卷烟加香试验.结果表明:桔梗浸膏在300,450,600,750,900℃裂解温度下检测到的挥发性热裂解产物分别达20种、33种、48种、46种和46种;桔梗浸膏具有改善和修饰卷烟吸味、丰满烟气、减轻刺激性的作用.桔梗浸膏添加到卷烟中能明显的提高卷烟抽吸品质.  相似文献   

2.
Py-GC/MS分析烟用添加剂黄芩浸膏的热裂解产物   总被引:1,自引:0,他引:1  
采用在线热裂解气相色谱-质谱法(Py-GC/MS)法研究了黄芩浸膏热裂解行为。在氦气氛围中,将黄芩浸膏分别在300、450、600、750和900℃下进行热裂解,并以GC/MS对其裂解产物进行定性和半定量分析,并用黄芩浸膏进行了卷烟加香试验。结果表明:①黄芩浸膏在这一系列裂解温度下检测到的挥发性热裂解产物分别为12种、19种、40种、55种和46种;②黄芩浸膏低温区(300℃~450℃)裂解后产生大量醛类、酮类、酯类和呋喃类物质,这些物质是构成卷烟香味的重要物质,能改善卷烟吸味、减轻刺激性;③在高温区(750℃~900℃)产生大量的芳香族化合物,如苯、甲苯、乙苯、萘等。该研究为香味物质在卷烟燃烧过程中的挥发性物质提供了例证。  相似文献   

3.
采用裂解气相色谱-质谱法(Py-GC-MS)研究了香叶醇热裂解性质。以氦气为载气,将香叶醇样品分别在不同温度(300,400,500,600,650,700,800℃)下进行热裂解,将热解产物直接引入气相色谱-质谱仪进行定性和半定量分析。结果表明:在700℃时香叶醇完全裂解,裂解产物可达87种。根据主要的裂解产物和其相对含量的变化对香叶醇裂解机理进行初步探讨,为香叶醇在卷烟中的作用评价提供重要的理论依据。  相似文献   

4.
麻浆卷烟纸热裂解产物的气相色谱/质谱分析   总被引:1,自引:0,他引:1  
孙川  桂永发  缪明明 《应用化学》2008,25(12):1478-0
采用热失重(TG)和裂解气相色谱/质谱法(PyGC/MS)研究了麻浆卷烟纸的热裂解行为.在He气气氛围中,将麻浆卷烟纸分别在400、500、600、700、800和900℃下进行热裂解,并以GC/MS对其裂解产物进行定性和半定量分析.结果表明,不同的裂解温度直接影响生成产物的类型和相对含量.麻浆卷烟纸可裂解出1-甲基-1,3-环戊二烯、2-甲基呋喃、2,3-二氢香豆酮、苯和甲苯等156种产物.低温下,裂解产物主要为烯类、呋喃类和酮类化合物;随着裂解温度的增加,烯、酮类的含量下降,苯及其衍生物和稠环芳烃的含量逐渐增加.可通过降低卷烟燃烧温度来降低卷烟纸裂解产生的有害成分含量.如果单纯考虑麻浆卷烟纸的影响,卷烟的最佳燃烧温度应控制在500℃左右.  相似文献   

5.
卷烟样品在不同温度(400,600,800,1 000,1 200℃)下裂解后,用气相色谱-质谱法测定卷烟中烯烃类化合物的释放量。结果表明:有害性烯烃类化合物的释放量随热裂解温度的升高而增多;当热裂解温度为600℃时,烯烃类香味物质的累计释放量达到最大值。因此,当卷烟燃烧温度在600℃附近,烟气中有害产物的释放量将大幅减少,并保持清香香气的丰满度。  相似文献   

6.
采用在线热裂解/气相色谱-质谱(Py/GC-MS)联用技术对3-吡啶甲酸茴香酯进行热裂解分析。通过酰氯化和酯化反应合成了新型目标化合物3-吡啶甲酸茴香酯,其分子式为C14H14NO3。目标化合物的结构经核磁氢谱(1H NMR)、核磁碳谱(13C NMR)、红外光谱(IR)和高分辨质谱(HRMS)进行确证,并通过热重-微热重-差示扫描量热(TG-DTG-DSC)分析方法对目标化合物的热稳定性进行分析。在空气氛围中,将目标化合物分别于300,600,900℃下进行热裂解,并通过气相色谱-质谱法对其挥发性热裂解产物进行定性和半定量分析。研究显示:目标化合物共经历了两次失重过程。第一次失重在129.9~158.9℃之间,失重2.3%;第二次失重在158.9~274.9℃之间,失重达90.1%,230.1℃时失重率最大。热裂解共产生44种产物,包括具有香味特征的大茴香醛、对甲基苯酚、松油醇、D-香茅醇、大茴香醚和茴香醚等化合物。其中裂解温度对裂解产物的种类和相对含量具有明显影响。300℃时α-二去氢菖蒲烯的相对含量最高,600,900℃时,相对含量最高的分别是大茴香醛和对甲基苯酚。苯甲醛、茴香醚和大茴香醚的相对含量随着温度的升高呈先增加后降低趋势;而对甲基苯酚含量则随着温度的升高而增加。根据主要裂解产物及其相对含量的变化,对目标化合物的裂解机理进行了初步探讨。  相似文献   

7.
在模拟卷烟点燃过程的条件下对丁香花蕾油进行了热裂解,以气相色谱一质谱法测定其在不同温度(300,600,900℃)下的裂解产物.结果表明:300℃时释放出主要成分子丁香酚,f}.石竹烯和乙酰丁香酚酯,总合量高达92.94%;在600℃时其主要成分子丁香酚发生大量裂解,并且产生少量有害物质;在900℃时子丁香酚完全裂解,且产生大量有害物质,根据主要的裂解产物和其相对含量的变化对丁香花蕾油的裂解机理进行初步探讨,为香精在卷烟中的作用评价提供重要的理论依据.  相似文献   

8.
张燕红  黄洪  夏正斌  陈焕钦 《色谱》2008,26(4):519-522
采用高分辨裂解气相色谱-质谱法(PyGC-MS)分析了FR-4型印刷电路板粉末样品的裂解产物。在氦气氛围中,分别在350,450,550,650和750 ℃下对印刷电路板粉末样品进行热裂解,并通过毛细管气相色谱-质谱对裂解产物进行分析,研究了不同裂解温度下裂解产物分布以及主要裂解产物的产率与裂解温度的关系,根据热分解产物的组成,探讨了热分解反应机理。  相似文献   

9.
TGA和Py-GC/MS研究不同氛围下烟草的热失重和热裂解行为   总被引:1,自引:0,他引:1  
应用热重红外联用技术(TG-FTIR)和热裂解气相色谱-质谱联用技术(Py-GC/MS)对卷烟烟丝的热失重和热裂解行为及其裂解产物进行研究.采用热重分析法测定不同气氛下卷烟样品的热失重(TG)、微商热重(DTG)曲线,以及热裂解过程中H2O、CO2、CO、NH3和CH4等气体物质的释放量.结果表明,裂解气氛不同可以显著...  相似文献   

10.
提出了热裂解气相色谱-质谱法(Py-GC-MS)研究聚四氟乙烯涂层的热裂解性质。采用管炉型热裂解装置和不锈钢毛细管柱,根据样品的复杂程度进行分阶段释放气体分析,得到聚四氟乙烯涂层不同热裂解阶段的释放气体色谱图。结果表明:聚四氟乙烯涂层在100~300℃热裂解温度下检测到的热裂解产物为1,4-二甲基-2,5-二乙基苯、异丙氧基苯胺、双酚A;在300~380℃热裂解温度下检测到的热裂解产物为苯乙烯、α-甲基苯乙烯、4,4′-二甲基苯胺;在380~460℃热裂解温度下检测到的热裂解产物为苯酚、苯胺、对氨基甲苯、二苯醚;在460~600℃热裂解温度下检测到的热裂解产物为四氟乙烯单体。  相似文献   

11.
A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.  相似文献   

12.
The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp3)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp2)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp2)?H and aliphatic 1,5- and 1,6-C(sp3)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp3)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp2)?H insertion.  相似文献   

13.
N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).  相似文献   

14.
An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y1 and Y2. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.  相似文献   

15.
In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.  相似文献   

16.
Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.  相似文献   

17.
用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.  相似文献   

18.
19.
A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu0 as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than CuI in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).  相似文献   

20.
(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C60, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号