顶空固相微萃取-气相色谱-质谱法同时测定饮用水源水中24种VOCs

建立了同时测定饮用水源水中24种挥发性有机物(VOCs)的顶空固相微萃取-气相色谱-质谱法.用75 μm CarboxenTM-Polydimethylsiloxane(CAR-PDMS)固相微萃取柱顶空萃取水样中的VOCs,VOCs用气相色谱-质谱联用仪检测,采用内标法定量.对萃取柱涂层、样品盐度、萃取温度和萃取时间等样品前处理条件进行了优化,VOCs的检出限在0.03～0.31 μg/L之间,线性相关系数r＞0.996(二氯甲烷和三氯甲烷除外).对饮用水源水实际水样0.50μg/L和1.00 μg/L两个加标浓度水平的回收率进行了测定,三氯甲烷回收率均值分别为104％和142％,其余VOCs回收率分别为90.0％～120％和88.0％～110％,除二氯甲烷和三氯甲烷外,其余VOCs测定结果的相对标准偏差均小于15.0％(n=6).该方法适用于饮用水源水中挥发性有机物的监测分析.     

顶空液相微萃取-气相色谱法测定盐酸雷尼替丁中二氯甲烷和三氯甲烷的残留量

采用顶空液相微萃取与气相色谱联用技术测定雷尼替丁中二氯甲烷和三氯甲烷的残留量。自制了萃取液保护装置。考察了萃取溶剂的种类、萃取时间、萃取温度、萃取液的体积对二氯甲烷和三氯甲烷萃取效果的影响。以正十三烷为萃取剂,在60 ℃下萃取30 min,萃取液滴体积2 μL。二氯甲烷含量在1～10 μg/g范围内与色谱峰高呈线性关系,相关系数(r2)为0.9733;三氯甲烷含量在1～10 μg/g范围内与色谱峰高呈线性关系,r2为0.9724。二氯甲烷和三氯甲烷的最低检出限分别为0.0273 μg/g和0.0410 μg/g,加标回收率分别为93.6%～102%和98.1%～103%。方法简便易行,测定结果准确。     

固相微萃取-气相色谱法测定食品添加剂中有害有机挥发杂质

建立了固相微萃取（SPME）-气相色谱法（GC）测定食品添加剂中有害有机挥发杂质：二氯甲烷、三氯甲烷、苯、三氯乙烯和1、4-二n恶烷的方法。以聚二甲基硅氧烷（PDMS）涂层的萃取纤维萃取糖精钠、柠檬酸、苯甲酸钠溶液中的待测组分。以HP-5毛细管柱为分离柱，火焰离子化检测器（FID）定量测定。优化了固相微萃取条件：萃取纤维、萃取方式、萃取温度、平衡时间、pH及电解质浓度等。在优化的试验条件下，进行了方法的检出限、精密度、回收率试验。5种组分的回收率在97．3％～103．9％之间。     

分子印迹固相萃取检测罐装食品中双酚A

以双酚A为模板分子,3-氨基丙基乙氧基硅烷为功能单体,通过溶胶-凝胶反应合成双酚A分子印迹纳米硅胶微球。以印迹微球为固相萃取吸附剂,优化固相萃取条件,确定二氯甲烷为上样溶剂。固相萃取选择性实验表明,在双酚A及其结构类似物四溴双酚A、双酚C、壬基酚的混合物溶液中,印迹萃取柱对双酚A具有良好的选择性能,回收率达到90.7%。浓度为2.5和5μmol/L的加标罐装食品样品,经印迹萃取柱预处理,液相色谱检测得到回收率72%～84%,相对标准偏差2.9%～4.4%。     

UAE/SPE-GS/MS法同时测定纺织废物中17种氯苯类污染物

本文建立了超声波辅助萃取/固相萃取法-气质联用法(UAE/SPE-GS/MS)同时测定纺织固废物中17种氯苯类污染物的分析方法。从超声萃取溶剂、超声萃取时间、超声萃取温度和固相萃取小柱等前处理条件进行优化,以保留时间定性,外标法定量。结果表明,纺织固废样品在超声50℃的水浴中经二氯甲烷溶剂超声萃取30min后,再通过弗罗里硅土(Florisil)固相萃取柱净化,测得17种氯苯类污染物的回收率为80%～107.6%,相对偏差RSD(n=10)小于5.5%。     

顶空固相微萃取-气相色谱法测定卷烟包装材料中残留溶剂

提出了顶空固相微萃取-气相色谱法测定卷烟包装材料中常用溶剂的方法。为使固相微萃取达到更高的效率,选用75μm CAR/PDMS的固相微萃取头,萃取温度及时间为100℃和40min,解吸温度及时间为200℃和10min。用DB-1石英毛细管色谱柱分离,火焰离子化检测器检测。方法的加标回收率在79%～92%之间,相对标准偏...     

羧基化单壁碳纳米管涂层同时测定纯净水中的烷基酚和双酚A

用溶胶-凝胶方法制备了羧基化碳纳米管溶胶凝胶固相微萃取涂层,采用顶空固相微萃取-气相色谱法测定纯净水中的烷基酚和双酚A.优化了萃取涂层的萃取时间、萃取温度、盐浓度以及解析时间等实验参数.结果表明,在萃取温度为90℃和盐浓度为0.36 g/mL的条件下萃取30 min,250℃下解析3 min,涂层的萃取效果最好.与商用...     

山药中有机氯杀虫剂的自制碳纳米管探头顶空固相微萃取/气相色谱分析

以碳纳米管为固相涂层,自制萃取探头,顶空固相微萃取/气相色谱分析山药中有机氯杀虫剂六六六和滴滴涕.对萃取温度、萃取时间、样品的稀释度及离子强度等影响萃取效率的因素进行了优化.方法的线性范围为0.5 ～6.0 μg·L-1,相关系数r>0.992 1,检出限(S/N=3)为1.98 ～12.24 ng·L-1,样品加标回收率为70% ～120%,相对标准偏差为1.76% ～18.15%.     

顶空-固相微萃取-气相色谱-质谱法测定烟气中挥发性和半挥发性成分

提出了顶空-固相微萃取-气相色谱-质谱法测定烟气中挥发性和半挥发性成分。结合信息量最大的原则,确定了固相微萃取时萃取纤维头为碳分子筛/聚二甲基硅烷萃取纤维头,萃取温度为70℃,萃取时间为60min。在气相色谱分离中用Agilent DB-1色谱柱为固定相,在质谱分析中采用全扫描模式。结果表明:共鉴定出107种成分,含量最大的成分是烟碱(18.07%),其次是新植二烯(11.46%),主要的3类挥发性和半挥发性成分依次为苯系物、酮类以及杂环类。     

石墨烯固相微萃取纤维的制备及对多氯联苯的检测

采用溶胶-凝胶方法合成了石墨烯复合材料,将其均匀地涂在铜丝表面制备了石墨烯固相微萃取纤维,结合固相微萃取-气相色谱-电子捕获检测器(SPME-GC-ECD)技术,建立了对环境中类二英多氯联苯(DL-PCBs)的直接测定方法。实验优化了萃取温度、萃取时间、pH值和离子强度等固相微萃取条件。在优化条件下,石墨烯固相微萃取纤维较商品化纤维(100μm PDMS、75μm CAR/PDMS、85μm PA)的萃取效率平均高2倍。对于DL-PCBs分析,该方法在0.05～3.5μg.L-1范围内呈良好线性(除PCB169外,r2均高于0.99),检出限为4.7～8.8 ng.L-1,单个纤维间及纤维与纤维间的相对标准偏差分别为1.4%～8.1%和2.4%～12.8%。该纤维对12种环境样品中DL-PCBs加标0.5μg.L-1和2 ng.g-1的回收率为87%～120%。方法简单、快速、灵敏,可实现对多氯联苯的痕量检测。     

Influence of the solvent on the extraction of copper(II) from nitrate medium using salicylideneaniline

Different solvents including cyclohexane, dichloromethane, chloroform, toluene, 1-octanol, and methyl isobutyl ketone (MIBK) have been evaluated in extracting copper(II) from nitrate medium by salicylideneaniline. Extracted species differs from solvent to solvent: CuL₂ in cyclohexane, toluene, 1-octanol, and methyl isobutyl ketone. However, in dichloromethane or chloroform, there are two complexes of the type CuL₂ and CuL₂(HL). The extraction constants and percentage of extraction (%E) are calculated for different solvents. Solvent played an important role in recovering copper(II) from the aqueous solution, thus affecting the extraction equilibrium and extraction efficiency. The nonpolar solvent showed better performance than the polar solvent. The maximum extraction efficiency was 85.75% at pH?=?4.5, which was from cyclohexane.     

The determination of polychlorinated biphenyl in small samples of monkey milk and tissues. II. Extraction efficiency

The extraction efficiency of benzene, toluene, dichloromethane, acetone:hexane and chloroform:methanol with respect to lipids and polychlorinated biphenyls was investigated using small samples of monkey adipose tissue, liver, kidney, brain, skin, feces and milk. The most efficient solvents were: acetone:hexane and chloroform:methanol for brain, feces, kidney, liver and milk; acetone:hexane and dichloromethane for adipose tissue; acetone:hexane and toluene for blood and dichloromethane for skin tissue. Within these solvent pairs acetone:hexane was the most outstanding with respect to an average of 90% PCB recoveries from fortified samples in the range of 0.02-2 ppm. In addition, a comparison was made between the lipid determination before and after Florisil column chromatography. Only adipose and blood lipids were sufficiently recovered from Florisil to make a lipid determination after chromatography feasible.     

In-tube extraction for enrichment of volatile organic hydrocarbons from aqueous samples

In-tube extraction (ITEX) is a novel solventless extraction technique in which a headspace syringe with a needle body filled with a sorbent (here: Tenax TA) is used. The analytes are extracted from sample headspace by dynamic extraction. The needle body is surrounded by a separate heater, which is used for thermal desorption of analytes into the injection port of a GC system. We report here for the first time the optimization and evaluation of a fully automated analytical method based on ITEX. As target analytes, 19 common groundwater contaminants such as halogenated volatiles and monoaromatic compounds have been chosen. Method related parameters such as extraction temperature, number of extraction cycles, extraction and desorption volume as well as extraction and desorption flow rates were investigated in detail. The linear dynamic range of the ITEX method ranged over six orders of magnitude between 0.028 microg/L and 1218 microg/L with linear correlation coefficients between 0.990 and 0.998 for the investigated compounds. Method detection limits for monoaromatic compounds were between 28 ng/L (ethylbenzene) and 68 ng/L (1,2,4-trimethylbenzene). For halogenated volatile organic compounds, method detection limits between 48 ng/L (chloroform) and 799 ng/L (dichloromethane) were obtained. The precision of the method with external calibration was between 3.1% (chloroform ethylbenzene) and 7.4% (1,2,3-trimethylbenzene).     

Dynamics of chloromethanes in cryptophane-E inclusion complexes: a 2H solid-state NMR and X-ray diffraction study

In this paper, we present a variable temperature (2)H solid-state NMR investigation of cryptophane-E:chloroform and cryptophane-E:dichloromethane inclusion complexes. The (2)H line shapes and nuclear spin relaxation rates were analyzed in terms of the distribution of C-D bond orientations and the time scale of the guest dynamics. It was found that encaged chloroform produces broad (2)H spectra, and that its reorientation is relatively slow with a correlation time of approximately 0.17 mus at 292 K. In contrast, the (2)H line shapes of encaged dichloromethane are narrow and the motion of this guest molecule is fast with a correlation time of approximately 1.4 ps at 283 K. The (2)H NMR data were complemented by an X-ray diffraction study of the cryptophane-E:dichloromethane structure, which was utilized in the analysis of the NMR parameters.     

HRGC assay of antihistaminic drugs in plasma samples using a nitrogen-phosphorus detector

Thirteen antihistaminic drugs are separated on a CP-Sil 5 capillary column and are evaluated by a NP detector after extraction of spiked plasma samples, alkalinized, in a solvent mixture of chloroform, dichloromethane, and methanol. Intra- and inter-assay analyses showed high reliability, therefore this method can be usefully applied in experimental or clinical pharmacokinetic investigations.     

Use of modifiers in on-line and off-line supercritical fluid extraction

For many applications using supercritical fluid extraction (SFE), modifiers may be required.This paper will present some findings regarding the use of various modifiers including methanol, hexane, acetone, chloroform, dichloromethane, toluene, and tributylphosphate, in on-line and off-line SFE with cryogenic adsorbent trapping. The specific applications involved the extractions of petroleum hydrocarbons and pesticides from naturally incurred soils.     

涂布溶剂对涂敷型手性固定相手性识别能力的影响

以微晶纤维素为原料,在非均相乙酰化条件下反应合成了微晶纤维素三醋酸酯。分别以二氯甲烷、三氯甲烷作涂布溶剂,采用减压蒸发溶剂法将其涂布在硅胶上制备成适宜于高效液相色谱上用的涂敷型手性固定相,得到的ＣＳＰｓ对反－２,３－二苯基环氧乙烷和吡喹酮均具有较好的手性识别能力。     

Extraction of organic acids by ion-pair formation with tri-n-octylamine : Part 4. Influence of organic phase composition

Synthetic food dyes are extracted by ion-pair formation with tri-n-octylamine. Mixed organic phases are used, consisting of mixtures of hexane with one of the following solvent modifiers: chloroform, dichloromethane, methyl isobutyl ketone, butyl acetate or pentanol. Logarithmic plots of the distribution ratio versus the volume fracton of the solvent modifier are linear for dichloromethane, chloroform and pentanol. The efficiency of the solvents is classified as follows: dichloromethane > pentanol > chloroform > methyl isobutyl ketone > butyl acetate > hexane. The addition of pentanol to chloroform provides nearly quantitative recovery for hydrophilic solutes.