N掺杂富含(001)晶面TiO_2纳米片的制备及N掺杂浓度对可见光催化活性的影响(英文)

采用水热法制备了富含(001)晶面的锐钛矿型TiO2纳米片,并通过改变热处理过程中NH3流速制备不同N掺杂浓度的TiO2纳米片.运用X射线衍射、场发射扫描电镜、高分辨率透射电子显微镜、紫外-可见漫反射光谱、X射线光电子能谱和荧光光谱对光催化剂进行了结构和性能表征,并以罗丹明B为目标降解物,考察了N掺杂浓度对TiO2纳米片可见光催化活性的影响.结果表明,NH3流速为40ml/min时制备的N掺杂TiO2纳米片具有最低的光生电子-空穴复合速率,最高的OH产生能力并表现出最高的光催化活性.同时,讨论了N掺杂浓度对TiO纳米片可见光催化活性影响的机理.     

氢氟酸加入量对钛基半导体结构演变及光催化性能的影响

以钛酸丁酯为钛源,氢氟酸为氟源,采用溶剂热法制备了一系列钛基半导体纳米晶,考察了氢氟酸加入量对纳米晶结构演变的影响,并通过光催化产氢、光降解罗丹明B及瞬态光电流响应测试了所得纳米晶的光催化性能。当不加氢氟酸时,所得纳米晶为TiO_2纳米颗粒,主要暴露{101}面。加入少量氢氟酸时,所得纳米晶为主要暴露{001}面的TiO_2纳米片,这是由于氟离子吸附于纳米晶表面,降低{001}面表面能所致。由于{001}面与{101}面间的晶面异质结促进了载流子分离,该样品表现出了最高的光催化性能。继续增加氢氟酸加入量,氟离子开始进入晶格构成新晶相,所得纳米晶的表面与体相均形成TiO_2与TiOF_2混合相,形貌呈现片层堆叠结构,光催化性能下降。当进一步增加氢氟酸加入量后,氟离子全部进入晶格形成大颗粒(NH_4)_(0.3)TiO_(1.1)F_(2.1)。因其具有不适宜光催化反应的能带结构,该物质表现出了较差的光催化活性,但其可作为制备氮、氟掺杂钛基半导体材料的前驱体使用。     

具有主导晶面的BiOIO3/BiOCl异质结制备与光催化性能

分别以乙二醇/去离子水为溶剂,通过溶剂热/水热法分别制备了具有不同主导晶面的BiOIO₃/{110}BiOCl和BiOIO₃/{001}BiOCl异质结。采用X射线衍射、扫描电子显微镜、能量色散谱和紫外可见漫反射光谱对制备的BiOIO₃/BiOCl光催化剂进行了表征。在可见光照射下,通过对罗丹明B和苯酚水溶液的光催化降解,考察了BiOIO₃/BiOCl异质结的光催化活性。结果显示25%BiOIO₃/{110}BiOCl异质结具有最高的光催化效率。BiOIO₃/{110}BiOCl较好的光催化性能是由于其在可见光区较强的光吸收,以及异质结结构和BiOCl所具有的(110)主导晶面有利于光生载流子的分离。超氧自由基(·O₂^-)和空穴(h⁺)是光催化过程中的主要活性物质。此外,根据实验结果探讨了光催化性能增强的机理。     

具有主导晶面的BiOIO3/BiOCl异质结制备与光催化性能

分别以乙二醇/去离子水为溶剂,通过溶剂热/水热法分别制备了具有不同主导晶面的BiOIO₃/{110}BiOCl和BiOIO₃/{001}BiOCl异质结。采用X射线衍射、扫描电子显微镜、能量色散谱和紫外可见漫反射光谱对制备的BiOIO₃/BiOCl光催化剂进行了表征。在可见光照射下,通过对罗丹明 B和苯酚水溶液的光催化降解,考察了 BiOIO₃/BiOCl异质结的光催化活性。结果显示25% BiOIO₃/{110}BiOCl异质结具有最高的光催化效率。BiOIO₃/{110}BiOCl较好的光催化性能是由于其在可见光区较强的光吸收,以及异质结结构和BiOCl所具有的(110)主导晶面有利于光生载流子的分离。超氧自由基(·O₂^-)和空穴(h⁺)是光催化过程中的主要活性物质。此外,根据实验结果探讨了光催化性能增强的机理。     

非水溶剂热法制备(001)面暴露的F/TiO2纳米晶及其光催化活性

采用非水体系溶剂热法制备了(001)面暴露的锐钛矿相F/TiO2纳米光催化剂.结果表明,F的掺杂对TiO2纳米单晶的形成影响很大.一方面,F离子作为晶面导向剂稳定(001)晶面,形成(001)面暴露的锐钛矿相TiO2;另一方面,F离子也起到稳定剂作用,抑制纳米粒子的快速生长.以光催化降解甲基橙为模型反应比较了不同F/T...     

低温水热合成异形TiO2纳米晶及其表征

70 ℃下在钛酸四丁酯(TBOT)水热合成TiO2过程中, 加入油酸, 控制TiO2颗粒的生长方向, 无需热处理, 直接得到针状和纺锤形锐钛矿TiO2纳米晶. 应用透射电子显微镜、X 射线衍射仪对TiO2纳米晶进行了形貌观察和晶体结构的测定. 红外光谱分析表明, 油酸分子以静电作用吸附于针状TiO2纳米晶的表面. 根据UV-Vis吸收峰, 计算了TiO2纳米晶的禁带宽度. 纺锤形TiO2纳米晶具有较高的光催化活性, 60 min内催化降解了90%的罗丹明B.     

碳量子点在八面双锥和纳米片TiO2上的光催化

依次用溶剂热法和水热法制备得到暴露(101)晶面的八面双锥体二氧化钛OBP-TiO2和不同碳负载量的N-CDs/OBP-TiO2复合催化剂,以及暴露(001)晶面的纳米片二氧化钛TNS和不同碳负载量的N-CDs/TNS复合催化剂。利用TEM、XRD、XPS等表征手段对这2类复合催化剂的形貌结构、化学成分等作了鉴定。系统研究了碳量子点负载量对可见光降解RhB的光催化性能影响。实验发现,由于N-CDs的加入,均能较大提高2类复合催化剂的光催化性能。(101)高裸露晶面N-CDs/OBP-TiO2比(001)高裸露晶面N-CDs/TNS的光催化活性高。     

氮自掺杂暴露(001)晶面TiO_2微米片的可见光光催化CO_2还原性能增强（英文）

化石能源的使用可产生大量CO2,带来严重的温室效应.光催化CO2还原生产太阳燃料技术既有望缓解温室效应,又可以将低能量密度的太阳能转化为高能量密度的化学能储存起来方便使用.高效光催化材料的开发是发展光催化技术的关键.迄今,在已开发的所有半导体光催化材料中,Ti O2仍是广泛研究的明星材料.在实际使用中,Ti O2的光催化效率仍受限于其极弱的可见光利用率和较高的电子-空穴复合几率.近年来,越来越多的研究表明Ti O2的结构与形貌特征极大地影响其光催化效率.尤其,Ti O2的外露晶面设计与晶面效应研究引起了广泛关注.由于具有较高表面能和较多表面不饱和键,起初大多数理论和实验研究认为锐钛矿Ti O2(001)晶面是光催化活性晶面.后来,越来越多研究表明并非锐钛矿Ti O2(001)晶面的暴露比例越高其光催化活性就越高.最近,我们发现锐钛矿Ti O2(001)晶面与(101)晶面在调控光催化CO2还原性能上具有良好的协同效应.密度泛函理论计算表明,锐钛矿Ti O2的(001)晶面与(101)晶面的能带结构有差异,(001)晶面的导带位置相对于(101)晶面而言较高,而(101)晶面的价带位置相对于(001)晶面而言较低.基于此我们提出,具有合适比例的锐钛矿Ti O2的(001)晶面与(101)晶面的交界处可以形成最佳的表面异质结或晶面异质结.表面异质结的形成导致光生电子倾向于向(101)扩散,光生空穴倾向于向(001)扩散,从而促进光生电子-空穴分离,降低光生电子-空穴复合几率.在此工作基础上,我们直接以氮化钛为原料,氢氟酸为添加剂,通过简单的水热反应一步合成了氮自掺杂的Ti O2微米片.利用X射线粉末衍射、扫描电镜、X射线光电子能谱、紫外-可见漫反射光谱、氮气吸附-脱附以及电化学阻抗谱等方法手段对所制备的光催化剂进行了基本结构与理化性质表征分析,并研究了其可见光光催化CO2还原性能.电镜照片结果表明,我们所制备的氮自掺杂锐钛矿Ti O2微米片的(001)晶面与(101)晶面比例分别为65%和35%.基于我们前期研究结果,Ti O2微米片的(001)晶面与(101)晶面可以形成表面异质结,具有良好的电荷分离效率,这也得到了电化学阻抗谱研究结果的证明.同时,由于N的原位掺杂,所制备的Ti O2微米片具有优异的可见光捕获能力.由于可见光利用效率增强与光生电子-空穴分离效率提高这两方面的综合作用,所制备的氮自掺杂Ti O2微米片具有非常好的可见光光催化CO2还原制甲醇性能,比商用P25及氮掺杂Ti O2纳米粒子等参考样品的可见光光催化性能更优异.研究表明,通过原位自掺杂方法与晶面设计方法相结合,可以同时改善Ti O2的可见光利用效率和光生电子-空穴分离效率,优化Ti O2的可见光光催化性能,这也为后续开发新型高效光催化材料提供了新思路.     

pH调节剂对BiOCl结构和光催化降解RhB的影响

以水解法合成了BiOCl纳米片,并考察了制备溶液的pH调节剂对BiOCl晶形、形貌、孔径分布和比表面积、化学组成、光学性质及催化性能的影响.采用X射线衍射谱(XRD)、扫描电子显微镜(SEM)、N_2吸附、X射线光电子能谱(XPS)和紫外-可见漫反射光谱(DRS)对所合成的BiOCl样品进行表征.表征和催化结果表明:pH调节剂为NaOH和Na_2CO_3的BiOCl样品含有杂质,pH调节剂为NH_4OH的BiOCl为纯四方晶型材料;3种pH调节剂合成出的BiOCl都为纳米片,纳米片粒子大小顺序为Na_2CO_3NH_4OHNaOH,孔径大小顺序为Na_2CO_3NaOHNH_4OH;以NaOH、Na_2CO_3、NH_4OH为pH调节剂合成出的BiOCl的带隙能分别为3.27、3.21、3.15 e V,表面元素均为B~(3+)、O~(2-)和Cl~-;可见光降解罗丹明B的顺序为NH_4OHNa_2CO_3NaOH.并且,我们阐述了pH调节剂对光催化降解RhB的影响机理.     

超声波辐射快速合成高光催化性能的BiOCl(Br)纳米片

在室温条件下,利用超声波辐射方法快速合成了四方状BiOCl(BiOBr)纳米片光催化剂。应用N2-物理吸附、X射线粉末衍射、扫描电镜、透射电镜、紫外可见光谱等手段对催化剂进行了表征,并以波长为λ=365 nm的紫外光和420 nm<λ<660 nm的可见光为光源,评价了该催化剂光催化降解酸性橙Ⅱ的活性。表征结果表明,超声波辐射可加速BiOCl和BiOBr晶化过程,显著提高BiOCl和BiOBr的结晶度,并使其晶粒发生细化,提高催化剂的比表面积。活性测试表明,声化学合成样品的光催化活性优于普通搅拌制备的样品。其中BiOCl的紫外光催化活性高于商业TiO2(P25)光催化剂。     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.