表面修饰In纳米微粒的声化学法制备及结构表征

Surface modified indium nanoparticles were prepared by a simple and rapid process from bulk indium via ultrasound dispersion. The morphology and structure of synthesized nanoparticles were characterized by TEM, XRD, XPS and FTIR. The results show that the morphology of indium nanoparticles is spherical and the structure of indium nanoparticles is the tetragonal phase. The surface of indium nanoparticles was coated by 2 ethyl hexanoic acid, which could almost hold back oxidation of the indium nanoparticles. In addition, the tribological property of indium nanoparticles as additives in oil was evaluated on a four-ball tester and the results show that indium nanoparticles exhibit good performance in wear.     

A MORPHOLOGICAL STUDY OF POLY（DIVINYLBENZENE-co-ACRYLIC ACID） IN CROSSLINKING PRECIPITATION POLYMERIZATION

Divinylbenzene-80 （DVB-80） and polar monomer acrylic acid （AA） having hydrogen bonding at a total monomer loading of 5 vol% were precipitated-copolymerized in a variety of organic solvents with 2,2＇-azobis（isobutyronitrile） （AIBN） as initiator. The experiments were investigated from a two-dimensional matrix, i.e., the actual crosslinking degree of DVB varying from 0 to 80% and the solvent composition varying from 0 to 100% of toluene mixture with acetonitrile, when the mixture of acetonitrile and toluene was used as the reaction solvent. Under various reaction conditions, six distinct morphologies including soluble polymers, swellable microgels, coagulum, irregular microparticles, and nano-/micrometer microspheres were formed and the structures of these polymer architectures were described. A morphological map was utilized to discuss the effects of both crosslinking degree of DVB and composition of solvent on the transitions between morphology domains. The results demonstrated that the microspheres are formed by an internal contraction due to the marginal solvency of the continuous phase and the crosslinking of the polymer network through the covalent bonding from DVB as well as the interchain hydrogen-bonding between the carboxylic acid units.     

Facile preparation of efficient oil-soluble MoS_2 hydrogenation nanocatalysts

Oil-soluble MoS2 nanoparticles with narrow size distribution have been synthesized by a facile composite-surfactants-aided-solvothermal process.The as-prepared nanoparticles can be directly used as hydrogenation nanocatalysts or as precursors to achieve efficient supported nanocatalysts.The surfaces of these nanoparticles are proposed to be encapsulated within a layer of organic modifiers,which are responsible for the enhancement of their solubility in organic solvents.The activated-carbon supported MoS2 nanocatalysts exhibit higher activity than the unsupported ones towards hydrogenation reactions of naphthalene,owing to the synergistic effects between nanoparticles and supports.The advantages of the present nanocatalysts,such as removal of conventional presulfiding requirements and reduction of nanoparticle aggregations,make them become promising applications in related petroleum chemical industry.     

A Facile Solvothermal Synthesis of Monodisperse Ni Nanoparticles

A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample was characterized by XRD, TEM, and FTIR. The results indicate that Ni nanoparticles have the structure of face-centered cube and a narrow distribution with a diameter of （3.5±0.5） nm. The FTIR spectrum reveals that the nanoparticles are coated with oleic acid. In the synthetic process, N2H4·H2O was used as a reducing agent and oleic acid as a surfactant. The probable formation mechanism of the spherical nanoparticles was also discussed.     

纳米核壳式铜-锡双金属粉的制备及性能研究

A kind of novel core-shell Cu-Sn bimetallic nanoparticles has been prepared by a new method (displacement method), in which Sn was made to cover on the surface of Cu nano-core. The preparation method and reaction mechanism have been discussed. This reaction happened under the existence of coordinate agent-(NH₂)₂CS and protective agent PVP. The nanoparticles prepared were with a core-shell structure, granule diameter between 50～100 nm and good dispersing capability. The Cu-Sn nanoparticles proposed has better oxidation-resistant ability than Cu nanoparticles with corresponding granule diameter and can be applied as lubricant additives as well as antibacterial agent. When the additive amount is very low (0.1wt‰～0.5wt‰), it can improve the P_B of the lubricant by 92%～106%, and also enhance its antiwear characteristics and friction-reducing properties. At the concentration of 1 000 ppm, it can reach an antibacterial ratio of 99.99%.     

采用燃烧技术制备CuO纳米粒子:一种高效且环境友好的用于芳族醛合成芳族腈催化剂(英文)

CuO nanoparticles were synthesized using an energy-efficient and rapid solution combustion technique with malic acid employed as a fuel. The combustion-derived CuO nanoparticles were used as catalysts in a one-pot synthesis of aromatic nitriles from aromatic aldehydes and hydroxylamine hydrochloride. The catalyst was characterized by X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray analysis, transmission electron microscopy, and Brunauer-Emmett-Teller surface area analysis. The catalytic activity of the CuO nanoparticles in the synthesis of aromatic nitriles from aromatic aldehydes was evaluated. The present protocol offers the advantages of a clean reaction, simple methodology, short reaction duration (1-2 min), and high yield (85%-98%). The catalytic activity of the CuO nanoparticles was found to be higher than that of bulk CuO powder under the same conditions. The catalyst can also be recovered and reused up to four times with no significant loss of catalytic activity. The present approach is inexpensive and is a convenient technique suitable for industrial production of CuO nanoparticles and nitriles.     

Enhancement of Raman Scattering of 1,4-Benzenedithiol by CdS Nanoparticles Assembled on a Silver Surface

CAS nanoparticles were assembled on the smooth surface of a piece of silver by using 1,4-benzenedithiol as coupling molecules. The SEM and resonance Raman spectroscopic characterizations demonstrate that the nanosized structure of CdS was still preserved upon assembly, and a two-dimensional structure of CdS nanoparticles was formed on the substrate surface. The FT-Raman spectra indicate that 1,4-benzenedithiol was coupled between CAS nanoparticles and the silver surface with a tilted orientation. The Raman scattering of 1,4-benzenedithiol was substantially enhanced by the assembled CdS nanoparticles, probably due to the alteration of the polarizability of 1,4-benzenedithiol and the electromagnetic interaction between the dipoles of the CdS particle with its image in the metal substrate.     

没食子酸的激光光解研究

The transient species of gallic acid(GA)have been studied by 266 nm nanosecond laser flash photolysis inaqueous solution and acetonitrile.The intermediate with absorption at 320 nm was identified as excited triplet state(~3GA~*),the decay rates of which were obtained in aqueous solution and acetonitrile respectively.Energy transferfrom ~3GA~* to β-carotene was observed and the energy transfer rate constant k_(ent)was determined to be 2.2×10~9mol~(-1)·L·s~(-1).GA underwent photoionization during photolysis and the quantum yield of photoionization was de-termined to be 0.12 at room temperature with KI as a reference.     

Morphology Control and Catalytic Dehydrogenation Performance of Zeolitic Imidazolate Frameworks-8北大核心CSCD

Zeolitic imidazolate frameworks-8（ZIF-8）is a kind of porous material with large specific surface area and strong stability,which is widely used in gas storage,separation,catalysis and other fields. In this work,the effect of different reaction conditions,such as the molar ratio of Zn2+ to 2-methylimidazole,the amount of surfactant and the reaction solvents,on the size and morphology of ZIF-8 were reported. Among these conditions,the molar ratio of Zn2+ to 2-methylimidazole is the key factor affecting the size and morphology of ZIF-8. The synthesized ZIF-8 nanoparticles were characterized by SEM,BET and XRD. The size of ZIF-8 decreases gradually from 1500 nm to 850 nm then to 250 nm,and the morphology changes from truncated hexahedron to truncated dodecahedron and finally to dodecahedron. The specific surface area of ZIF-8 nanoparticles with a particle size of 250 nm is 1730 m2/g,and the pore size and pore volume are 1. 5 nm and 0. 6 cm3/g,respectively. Therefore,it can be seen that ZIF-8 nanoparticles with a particle size of 250 nm have excellent carrier characteristics. The impregnation method was further adopted to synthesize the supported catalyst,and boron ammonia was used as the reducing agent. The ZIF-8（250 nm）nanoparticles were loaded with metals/precious metal nanoparticles in situ,the component optimization and catalytic performance were further studied. The obtained catalyst ZIF-8/Pt0. 002@Ni0. 2 shows excellent performance in hydrogen generation from aminoborane. © 2022, Science Press (China). All rights reserved.     

PHOTOCHEMISTRY OF HYPOCRELLIN A (Ⅳ)——HYPOCRELLIN A-SENSITIZED PHOTOOXIDATION OF DIPHENYLAMINE

The photooxidation of diphenylamine in acetonitrile and methanol using Hypocrellin A as sensitizerwill be reported in this paper. The products in the two solvents were isolated and identified. The reac-tion mechanisms were investigated. In acetonitrile, diphenylamine was oxidized by singlet oxygen to formN-phenyl-p-benzoquinonimine. In methanol, N-phenyl-p-benzoquinonimine was produced predominantlythrougth a mechanism irrelevant to singlet oxygen. A small amount of diphenylamine reacted with methanoland singlet oxygen to give a novel product: N-phenyl-2-methoxy-p-benzoquinonimine.     

Crosslinking poly[1-(trimethylsilyl)-1-propyne] and its effect on physical stability

Poly[1-(trimethylsilyl)-1-propyne] (PTMSP) has been crosslinked using 3,3′-diazidodiphenylsulfone to improve its solvent resistance and physical stability. This study reports the influence of crosslinking on N₂, O₂ and CH₄ gas permeabilities and fractional free volume (FFV) as a function of time. Crosslinking PTMSP renders it insoluble even in excellent solvents for the uncrosslinked polymer. The gas permeability and FFV of uncrosslinked and crosslinked PTMSP decreased over time, so crosslinking PTMSP does not arrest physical aging. The addition of 10 wt.% polysiloxysilsesquioxanes (POSS) nanoparticles decreased the permeability of PTMSP by 55%, and the permeability and FFV values were stable over time for PTMSP films containing 10 wt.% POSS nanoparticles. The permeability of PTMSP at a given FFV was greater than that of other substituted polyacetylenes, polysulfones or polycarbonates, which is consistent with differences in the arrangement of free volume in these polymers, as probed by positron annihilation lifetime spectroscopy (PALS). Ellipsometry was used to characterize physical aging of thin (400 nm) uncrosslinked and crosslinked PTMSP films supported on silicon wafers. The ellipsometry results showed that crosslinking does not markedly slow physical aging of thin PTMSP films.     

Pre-concentration of trace amounts of manganese in water samples based on (1-(2-pyridylazo)-2-naphthol) modified magnetic nanoparticles

A simple procedure based on magnetic nanoparticles has been developed for analytical purposes. In this method, 1-(2-pyridylazo)-2-naphthol (PAN)-modified magnetic nanoparticles (MNPs) were used for separation and pre-concentration of manganese(II) ions from aqueous samples. This method combines the use of a solution solvent with separation of magnetic nanoparticles from sample solution using a magnet. The influence of different parameters, such as amount of extractant (PAN) loaded on the nanoparticles, pH of solution, adsorption time, amount of modified nanoparticle, type and amount of eluents for desorption of manganese from magnetic nanoparticles were evaluated. The effect of various cationic and anionic interferences on the percentage recovery of manganese was also studied. Manganese ions were adsorped from a solution at pH 9.5 and desorbed from nanoparticles with 10?mL of DMSO?:?HNO₃ (1?:?1, v/v). The detection limit of the proposed method was found to be 0.11?µg?L^?1. The method was employed to recover and determine the level of manganese in different water samples.     

Self‐Organized Nanocomposite of Gold Nanoparticles and π‐Electron Organic Molecules

Aggregates of gold nanoparticles were formed by simple addition of a dithiafulvene derivative (DF) to an acetonitrile solution containing gold ions. The discrete gold nanoparticles in the aggregates were separated by monolayers of oxidized DF. No aggregation was observed with the addition of poly(vinylpyrrolidone) (PVP), which acted as a strong stabilizer and inhibited self‐assembly of the gold nanoparticles. DF acted as a reducing agent for gold ions, a stabilizer, and a tether for the resulting gold nanoparticles. Intermolecular S···S interaction and Au–S bonds might be the driving force for the self‐assembly of the gold nanoparticles.     

First synthesis of 2-[alkylamino(diethoxyphosphoryl)methyl]acrylic ethyl esters

The ethyl α-bromomethyl-β-(diethoxyphosphoryl)acrylic acid ester 9 has been prepared by addition of bromine to allylphosphonate 7 then dehydrobromination with DBU in acetonitrile. Reaction of allylic bromide 9 with primary amines in a bimolecular S_N2′-type mecanism in methanol at low temperature, gives rise to the 2-[alkylamino(diethoxyphosphoryl)methyl]acrylic acid ethyl esters 6.     

3-芳基-6-对氯苯甲酰氨基均三唑并[3,4-b]-1,3,4-噻二唑的 合成及生物活性

利用3-芳基-4-氨基-5-巯基-1,2,4-均三唑和对氯苯甲酰异硫氰酸酯在乙腈中反应, 得到一系列3-芳基-6-对氯苯甲酰氨基均三唑并[3,4-b]-1,3,4-噻二唑, 用1H NMR, IR, MS和元素分析确定了其结构, 并对其进行了抑菌活性测试.     

Biocatalytic synthesis of (R)-(-)-mandelic acid from racemic mandelonitrile by a newly isolated nitrilase-producer Alcaligenes sp. ECU0401

By using acetonitrile as the sole nitrogen source, a microbial strain with high nitrilase activity, named as Alcaligenes sp. ECU0401, was newly isolated from soil, which could enantioselectively transform racemic mandelonitrile into (R)-(-)-mandelic acid, with an enantiomeric excess of >99.9%.     

2-[4-(2,6-二氟苯基)噻唑-2-基]-3-羟基丙烯腈衍生物的合成及生物活性

为了寻找生物活性良好的噻唑基丙烯腈类化合物, 利用2-[4-(2,6-二氟苯基)噻唑-2-基]乙腈(3)分别与取代氯甲酸酯4和取代苯基异氰酸酯6在碱存在下反应, 合成了8个2-[4-(2,6-二氟苯基)噻唑-2-基]-3-羟基-3-烃氧基丙烯腈化合物5和7个2-[4-(2,6-二氟苯基)噻唑-2-基]-3-羟基-3-取代苯胺基丙烯腈化合物7, 均为首次报道的丙烯腈类化合物. 化合物结构经1H NMR, IR, MS和元素分析表征. 初步生物活性测定结果表明, 在试验浓度下, 目标化合物均具有一定的杀虫和抑菌活性, 其中化合物5f和5h在100 mg/L浓度下对炭疽病菌的抑制率达95%; 化合物5g和7d在250 mg/L浓度下对棉红蜘蛛的致死率达85%.     

微波作用下2-烃基-4-喹啉酮的简便合成法

在微波作用下5-(甲硫亚烃基)丙二酸亚异丙酯可与芳胺发生加成消除反应,首先生成5-(芳胺基亚烃基)丙二酸亚异丙酯,继而进一步闭环,提供了2-烃基-4-喹啉酮的快速合成法。     

Spontaneous formation of Ag nanoparticles in dimethylacetamide solution of poly(ethylene glycol)

The spontaneous formation of Ag nanoparticles in a dimethylacetamide (DMAC) solution of poly(ethylene glycol) (PEG) was studied. FTIR analysis showed the formation of carbonyl groups, revealing that PEG acted as not only a protective agent but also a reducing agent in the formation of Ag nanoparticles. Since no significant reactions were observed when poly(tetramethylene glycol) (PTMG) was used to replace PEG or acetonitrile was used to replace DMAC, it was suggested that PEG molecules might be coiled to form pseudo-crown ether cavities, in which Ag complexes were bound to the oxyethylene groups and reduced, and that the use of a solvent which might appropriately solvate the Ag salt was important for the formation of Ag nanoparticles. In addition, the mean diameters of the resultant Ag nanoparticles were 3.8-9.0 nm, increasing with increasing AgNO(3) concentration. A sufficiently high PEG concentration relative to AgNO(3) was necessary for the formation of smaller Ag nanoparticles. This work provided a simple route for the in situ synthesis of Ag nanoparticles.     

多形态ZnO纳米粒子的制备及其紫外—可见光吸收性能研究

选用失水山梨醇单油酸酯／反应物水溶液／环己烷制成微乳液等“微反应器”，在其中控制反应，制备出了具有球形及棒状、不规则片状与球形但呈细胞器状排布的纳米氧化锌。用透射电镜（TEM）、动态激光光微射（DLLS）与X－射线衍射对产物的结构、形态、大小与化学成分进行了表征。系统研究了反应体系的组分、配比、反应温度及分散方法等反应条件对“微反应器”与产物形态、大小的影响。探讨了ZnO纳米粒子的稳定性及其原因。并对ZnO纳米粒子的紫外—可见光吸收性能进行了表征。