富锂锰基正极材料的表面改性研究进展

随着电动汽车和储能电站等电力设备的快速发展,对高能量密度的锂离子电池的需求日益增加.高比容量（>250 mAh·g^-1）的富锂锰基正极材料,有望成为锂离子电池实现高比能量（>350 Wh·kg^-1）的关键正极材料.富锂锰基正极材料的Li₂MnO₃相和晶格氧参与电化学反应使其拥有了高容量,但这也导致表面结构和成分容易发生变化,进而造成富锂锰基正极材料存在着诸如首次库伦效率低、倍率性能差和循环后电压和容量衰减严重等问题.因此,本文综述了富锂锰基正极材料的表面包覆、表面掺杂和表面化学处理三种表面改性方法,并进一步讨论了三种表面改性方法对材料性能提升的机制机理和优缺点.在此基础上,介绍了近些年基于多方法的表面联合改性工作.通过对富锂锰基正极材料进行表面联合改性,不仅可以改善其结构稳定性和抑制电极/电解液界面副反应,而且可以缓解其在循环过程中不断发生的结构转变和晶格氧的析出问题.最后,对富锂锰基正极材料表面改性研究方向进行了总结和展望.     

铝掺杂及钨酸锂表面包覆双效提升富锂锰基正极材料的循环稳定性

采用溶胶-凝胶法合成Al掺杂富锂锰基Li_1.2Mn_0.54-xAl_xNi_0.13Co_0.13O₂（x=0、0.03）锂离子电池正极材料,之后采用一步液相法制备Li₂WO₄包覆层,系统地研究了Al掺杂和Li₂WO₄包覆双效改性对富锂锰基正极材料电化学性能的影响.结果表明,Al掺杂后明显提升富锂锰基正极材料的循环稳定性,包覆层Li₂WO₄明显改善其倍率性能和放电平台电压衰减问题.Li₂WO₄包覆量为5% Li_1.2Mn_0.51Al_0.03Ni_0.13Co_0.13O₂正极材料在2.0~4.8 V充放电电压区间及1000 mA·g^-1电流密度下比容量仍高达110 mAh·g^-1左右,同时在100 mA·g^-1的电流密度下循环300次容量保持率为78%,而且循环过程中放电平台电压衰减也明显减缓.该工作为解决锂离子电池富锂锰基正极材料循环稳定性和平台电压衰减提供了新的思路.     

氟掺杂富锂锰基层状正极材料 Li1.2Mn0.54Ni0.13Co0.13O2的合成及其性能

本研究以硫酸锰、硫酸钻、硫酸镍、碳酸钠和氟化铵为原料，通过共沉淀法结合高温煅烧法合成氟掺杂富锂锰基正极材料 Li_1.2 Mn_0.54 Ni_0.13 Co_0.13O_1.92 F_0.08 。通过扫描电子显微镜(SEM)对样品形貌进行观察，利用x-射线衍射(XRD)技术表征晶体结构，利用x-射线能谱仪(EDS)对样品元素分布进行测试，对材料进行恒电流充放电并研究其电化学性能。结果表明:氟掺杂后的富锂锰基正极材料微观形貌没有发生明显变化并保持层状结构;氟原位掺杂的样品在电流密度为1C时循环65 圈后，放电比容量为179 mAh/g，容量保持率为91.89%，高于未掺杂的样品87.5% ,有效改善了材料的循环性能。     

富锂三元层状正极材料的研究进展

富锂三元层状正极材料(xLi₂MnO₃·(1-x)LiMO₂(0<x<1,M=Mn,Ni,Co))因其远高于其它正极材料的放电比容量而被视为下一代锂离子电池正极材料的最佳选择之一,是未来锂离子电池研究和发展的重点。 但由于其循环性能差、库伦效率低等缺陷,富锂正极材料迟迟不能实现商业化生产。 本文将介绍近几年国内外富锂三元层状正极材料的最新研究进展,主要包括富锂三元层状正极材料的组成、制备技术、结构和性能研究以及包覆与掺杂等改性方面的研究进展,同时对富锂层状正极材料未来的发展趋势和前景作了展望。     

纳米Al2O3包覆富锂锰基正极材料Li1.2Ni0.13Co0.13Mn0.54O2的性能研究

采用纳米三氧化二铝(Al₂O₃)对富锂锰基正极材料Li_1.2Ni_0.13Co_0.13Mn_0.54O₂进行表面均匀包覆, 并考察了最优纳米Al₂O₃包覆量下材料的电化学性能. 扫描电子显微镜(SEM)和透射电子显微镜(TEM)显示了纳米Al₂O₃对富锂锰基正极材料表面均匀包覆, X射线衍射分析(XRD)结果表明包覆后富锂材料依然具有良好的层状结构. 恒流充/放电循环测试发现, 包覆后的Li_1.2Ni_0.13Co_0.13Mn_0.54O₂材料的首次放电比容量为249.7 mA·h/g, 循环100次后的容量保持率为89.5%, 与未包覆的Li_1.2Ni_0.13Co_0.13Mn_0.54O₂材料相比, 容量保持率提升约13%. 循环伏安(CV)和电化学阻抗(EIS)测试结果表明, 纳米Al₂O₃包覆可有效抑制材料极化, 降低界面阻抗和电荷转移阻抗, 进而提升富锂锰基正极材料的电化学性能.     

锂离子电池正极材料Li1.2Mn0.54Ni0.13Co0.13O2研究进展

富锂锰基正极材料Li_1.2Mn_0.54Ni_0.13Co_0.13O₂因具有超过250 mA·h·g^-1的可逆比容量和高工作电压(>3.5 V. Li/Li⁺)以及经济成本低的特点，在便携式电子设备中发挥着重要的作用，也被认为是下一代混合动力汽车(HEV)和电动汽车(EV)的理想动力源，是一种有前途的正极材料。由于富锂锰基正极材料存在低倍率容量、电压衰减严重、初始容量损失大的问题，因此提高电池的容量和寿命是目前研究的重点。为此综述了锂离子电池富锂锰基正极材料Li_1.2Mn_0.54Ni_0.13Co_0.13O₂的储锂机理、制备方法以及改性研究。     

稳定富锂层状氧化物正极材料的结构与性能

因高能量密度和高能量转换效率,锂离子电池已被广泛应用于便携式电子设备和电动交通中。富锂层状结构氧化物以高达300 mAh·g^-1的可逆容量成为能量密度350 Wh·kg^-1及以上动力锂离子电池的重要候选正极材料。但是,欲使这类材料获得实际应用,就必须解决循环过程中结构衰退带来的一系列问题。本文重点介绍近几年来笔者所领导的研究组通过元素筛选实现材料的表面和体相掺杂,通过全新的结构设计稳定材料结构和性能方面的努力。同时,为使读者对国内外重要研究组在相关方面的研究进展也有所了解,我们也将从元素替代、结构一体化表面修饰(包括多层表面修饰和浓度梯度材料)、表面包覆和表面掺杂等方面介绍他们的重要研究成果。最后,将对该类材料的未来发展方向作出展望并给出我们的一些思考。     

一种碳纳米管改性富锂锰基正极材料的策略

采用一种新策略对Li1.184[Ni0.15Mn0.516Co0.15]O2进行改性,即通过气流破碎、高压均质混合分散和喷雾干燥的方法得到与碳纳米管复合的富锂锰基正极材料(CNT@LMR)。使用扫描电子显微镜(SEM)、透射电子显微镜(TEM)、X射线衍射仪(XRD)和拉曼光谱(Raman)的方法对改性的材料进行了表征,发现碳纳米管导电网络均匀地分布在富锂锰基正极材料的表面,而且在材料内部的一次颗粒之间也有大量的碳纳米管存在。电化学性能测试表明,碳纳米管改性后的富锂锰基正极拥有更好的倍率性能和循环寿命。在5C倍率下经过改性的富锂锰基正极的放电比容量为141.4 mAh·g-1,远高于未改性的富锂锰基正极的放电比容量(76.6 mAh·g-1)和碳纳米管仅作为富锂锰基正极导电剂时的放电比容量(110.7 mAh·g-1)。在1C倍率下循环100次后,碳纳米管改性的富锂锰基正极的容量保持率在87.2%,高于富锂锰基正极(77.8%)。不同循环次数下的电化学阻抗谱表明,均匀分布在富锂锰基正极材料表面的碳纳米管网状结构有效地改善了电极/电极液的界面反应,抑制了电极固体电解质界面(SEI)膜的增厚和减缓了电极的极化。同时,材料内部的碳纳米管导电网络降低了一次颗粒间的内阻并加快了电极的电荷转移过程。     

高比能锂离子电池层状富锂正极材料改性策略研究进展

层状富锂材料具有超过250 mAh∙g⁻¹的高可逆比容量,被认为是下一代高比能锂离子电池最具商业化前景的正极材料之一。然而,层状富锂材料在实际应用之前仍需解决诸多挑战,如高电压氧释放、层状到岩盐相的结构变化、过渡金属离子迁移等结构劣化,并由此带来了较低的初始库伦效率、电压/容量的衰减以及循环寿命的不足。针对以上问题,进行层状富锂材料改性无疑是一种行之有效的方法。本综述全面介绍了层状富锂材料的结构、组分以及电化学性能,在此基础上对材料改性策略进行了系统阐述,详细介绍了体相掺杂、表面包覆、缺陷设计、离子交换和微结构调控等一系列改性策略的现状以及发展趋势,最终提出了高容量和长循环层状富锂材料和高比能锂离子电池的设计思路。     

锂离子电池富锂锰基正极材料的研究进展

随着新能源如电动汽车、储能电站的蓬勃发展,人们对下一代高性能锂离子电池的能量密度、功率密度和循环寿命提出了更高的要求. 而富锂锰基正极材料xLi₂MnO₃·(1-x)LiMO₂（0 < x < 1,M = Mn、Co、Ni…）具有可逆比容量高（240 ~ 280 mAh·g^-1,2.0 ~ 4.8 V）、电化学性能较佳、成本较低等优点,已吸引了研究者的关注,有望成为下一代锂离子电池用正极材料. 本实验室采用固相法和溶胶-凝胶法制备不同的富锂锰基正极材料,其中,溶胶-凝胶法制得的Li[Li_0.2Mn_0.54Ni_0.13Co_0.13]O₂电极首周期放电比容量277.3 mAh·g^-1,50周期循环后容量272.8 mAh·g^-1,容量保持率98.4%. 本文重点结合本实验室的研究工作,对新型富锂锰基正极材料xLi₂MnO₃·(1-x)LiMO₂的结构、合成、电化学性能改性和充放电机理等进行总结与评述.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.