高硫合成气制甲硫醇钼硫基催化剂的制备

钼硫基催化剂;含硫化氢合成气;高硫合成气制甲硫醇钼硫基催化剂的制备     

压力对甲烷部分氧化制合成气反应的影响

甲烷部分氧化制合成气是近年来催化界关心的课题之一，文献报导的工作多在常压下进行［１～４］．然而天然气和纯氧都有一定压力，且以合成气为原料的后续过程通常都在较高压力下操作，从节能的角度出发，研究加压甲烷部分氧化制合成气具有重要的实际意义［１，２］．我们...     

CO2与CH4催化反应合成气研究

CO_2与液化天然气(98%为C_3-C_4烃)催化重整制合成气,八十年代初期在当时的西德已建立了工业生装置.近年来,由于石油资源日趋短缺,促进世界各国重视探讨和研究天然气资源利用的新途径.除甲烷氧化偶联制乙烯,甲烷氧化制甲醇和甲醛等直接转化过程已引起广泛的重视外,研究和开发由甲烷制取合成气的新过程也正日益受到人们的关注,其中利用CO_2与甲烷催化重整制合成气,可将造成温室效应,破坏人类生存环境的CO_2气体转化为宝贵的化工原料,所制得的合成气中CO/H_2=1,特别适合做羰基合成和合成有机含氧化合物的原料,近年来对该反应的研究已引起人们的重视.其反应表示如下:     

Ni整体型催化剂大空速甲烷自热氧化制合成气

随着石油资源的逐渐减少,天然气将是未来基本化学品的主要碳源.因此,天然气的开发利用已日益受到世界范围的广泛重视.当前,天然气的化工利用主要是用于生产合成气,再由合成气制取大量化学品,如合成氨、甲醇和烃类等.目前,工业上生产合成气主要采用水蒸气催化重整工艺.     

Experimental study of bio-oil gasification with steam

利用固定床反应器对生物油的水蒸气非催化气化性能进行了实验研究,考察了温度和水蒸气的加入量对气化过程的影响,对气化所得粗合成气的组成分布进行了分析.结果表明,升高温度有利于生物油向合成气转化,1200℃时,生物油的碳转化率可达97.8％,合成气有效成分(H2+CO)的产率可达77％,其中H2/CO摩尔比为1.19;水蒸气的加入可以提高合成气中的H2/CO摩尔比,当S/C(水碳比)=4时,合成气中的H2/CO摩尔比可达3.69,与此同时,水蒸气的加入不利于合成气有效成分产率的提高;生物油气化所得气体为中热值气体.     

煤在合成气、氢气和氮气气氛下的热解研究

采用固定床反应器，在合成气气氛下对中国寻甸褐煤、蒙古Shiveeovoo褐煤和Khoot油页岩进行了热解研究。升温速率10 ℃/min，褐煤热解温度400 ℃～800 ℃，油页岩热解温度300 ℃~600 ℃，研究结果与氢气和氮气气氛下的热解进行了比较。结果表明,与加压热解不同，褐煤在不同气氛下常压热解半焦和焦油收率差别不大，但对油页岩，合成气和氢气气氛下热解焦油收率高于氮气，气体收率低于氮气。黄铁矿硫在不同气氛下热解均极易脱除，并部分转化为有机硫。油页岩的总硫脱除率远低于褐煤，与油页岩的高灰分含量有关。与氮气甚至氢气相比，合成气下寻甸褐煤的高总硫脱除率和低有机硫含量与合成气中的CO有关。但CO在油页岩热解脱硫中不起作用，也与油页岩高灰分含量有关。研究结果也表明合成气可代替氢气进行加氢热解。     

生物油水蒸气气化实验研究

利用固定床反应器对生物油的水蒸气非催化气化性能进行了实验研究,考察了温度和水蒸气的加入量对气化过程的影响,对气化所得粗合成气的组成分布进行了分析。结果表明,升高温度有利于生物油向合成气转化,1 200 ℃时,生物油的碳转化率可达97.8%,合成气有效成分(H₂+CO)的产率可达77%,其中H₂/CO摩尔比为1.19;水蒸气的加入可以提高合成气中的H₂/CO摩尔比,当S/C(水碳比)=4时,合成气中的H₂/CO摩尔比可达3.69,与此同时,水蒸气的加入不利于合成气有效成分产率的提高;生物油气化所得气体为中热值气体。     

合成气制低碳燃料醇工业侧线模试

在接近工业操作条件下,综合考察催化剂制备放大、工业粒度催化剂、反应器放大及工业合成气等放大效应对合成气制低碳燃料醇催化反应的影响。在模试反应器中采用多段蛇管换热及移热与催化剂床层合理稀释,从而保证反应温度均匀。在模试中较系统地考察了温度、压力、空速及合成气中CO_2含量对合成低碳燃料醇反应的影响。在400—405℃,14—15MPa,尾气空速4000h~(-1)条件下进行了1000小时寿命试验,结果良好。低碳燃料醇的时空产率为0.21—0.25升醇/升催化剂/小时。在燃料醇中,甲醇占74—77%,异丁醇12—15%。本工作为合成气制低碳燃醇料工业试验装置的基础设计提供数据。     

K-La-Ni/Si-2催化低碳烷烃与二氧化碳重整制合成气(英文)

Ｎｉ／Ｓｉ２催化剂具有较好的低碳烷烃与二氧化碳重整制合成气的反应性能，添加Ｌａ２Ｏ３助剂和Ｋ２Ｏ助剂可提高催化剂活性和合成气收率，从而进一步改善催化剂的低碳烷烃与ＣＯ２重整制合成气的反应性能，研制的ＫＬａＮｉ／Ｓｉ２催化剂，用于天然气与ＣＯ２重整反应制合成气可达９７％的低碳烷烃转化率和９５％以上的合成气收率。     

非合成气法烯烃、炔烃氢甲酰化研究进展

烯烃、炔烃的氢甲酰化反应是制备醛及其衍生物的重要反应,传统的过渡金属催化合成气(CO/H_2)合成法,因为价格低廉,工艺成熟,在工业上得到了广泛应用.然而合成气的高毒性、高危性限制了它的实验室研究,因此使用非合成气的氢甲酰化反应吸引了化学家的研究兴趣.采用非一氧化碳(CO)为羰基源的新型氢甲酰化研究发展迅速,我们对该领域近20年的发展进行综述,针对合成气替代物甲醛(HCHO),二氧化碳(CO_2),甲酸(HCOOH),(缩)乙醛酸(HOOCCHO)丁醛以及多元醇等优缺点进行了详细的讨论,并对该领域发展方向予以展望.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.