钴电极在碱性溶液中氧化还原反应的现场共聚焦显微喇曼光 …

采用现场共聚焦显微喇曼光谱研究钴电极在碱性溶液中的氧化还原行为和生成物的喇曼光谱特征。研究结果表明：电位正向扫描时,在－０．６４Ｖ左右Ｃｏ氧化生成Ｃｏ（ＯＨ）２和ＣｏＯ,随着电位正移逐步生成Ｃｏ３Ｏ４,在正电位区电极表面层主要是Ｃｏ３Ｏ４,ＣｏＯＯＨ和ＣｏＯ２等;电位负向扫描时,电极由的高价含氧化合物相继还原为Ｃｏ３Ｏ４和Ｃｏ（ＯＨ）２,并最终还原为Ｃｏ。由不同电位下的生成物的喇曼光谱可以看出;电     

N,O-配体钴化合物的合成及其环氧丙烷羰化酯化的催化性能

合成了9种N,O-配体化合物L¹～L⁹.化合物L¹～L⁴分别与0.5 equiv.Co₂(CO)₈发生氧化还原配位反应生成中性单核钴化合物1～4;L⁵～L⁷分别与1 equiv.Co₂(CO)₈发生歧化和氧化还原配位反应;L⁸与5/6 equiv.Co₂(CO)₈以及1.2equiv.MeOH和0.4 equiv.H₂O发生歧化和氧化还原配位反应;L⁹与0.5 equiv.Co₂(CO)₈发生歧化配位反应生成同钴核离子对化合物5～9.这些化合物中的阴离子均为[Co(CO)₄]^-.相应地,化合物8中的阳离子是三核钴簇,其它化合物中的阳离子都是单核钴.化合物1～9通过FT-IR谱...     

二元析氧催化剂CoxCr1-xO3/2的制备及性能研究

用热分解法制得不同混合比例的二元金属氧化物催化剂Co_xCr_1-xO_3/2（x = 0,0.2,0.4,0.6,0.8,1）,使用SEM、XRD和XPS观察表征催化剂形貌、晶型和价态,使用线性扫描伏安、阶梯波伏安和恒电位测试电极活性、过电位和稳定性. 结果表明,该Co₃O₄和绿铬矿型Cr₂O₃混合物形成固溶体Co_xCr_1-xO_3/2. x = 0.2时,Co_0.2Cr_0.8O_3/2电极性能较单一Co₃O₄和Cr₂O₃电极好,在高电位（1.0 V vs. Ag/AgCl）,其电流强度是Co₃O₄的3.75倍,Cr₂O₃的15.2倍,其过电位（η = 0.0703 V）也较Co₃O₄（η = 0.6109 V）和Cr₂O₃（η = 0.435 V）小,催化性能最好,在强碱性溶液（pH=13）中有良好的稳定性.     

Co3O4/CeO2 CO氧化的原位红外光谱研究

采用沉淀氧化法制备了Co₃O₄/CeO₂催化剂。分别在干、湿条件下进行了一氧化碳氧化反应研究。运用FT-IR表征手段,在钴铈复合氧化物上进行了CO吸附及CO/O₂共吸附研究。结果表明,与纯的Co₃O₄样品相比,Co₃O₄/CeO₂具有明显的抗湿气能力。Co₃O₄/CeO₂催化剂在进行CO氧化时,表面形成了类碳酸盐物种。当环境温度低于453 K时,催化剂上类碳酸盐的生成与形成类碳酸盐物种后受热分解存在着动态平衡。当环境温度高于493 K,催化剂上生成的类碳酸盐物全部受热分解。氧化铈的加入提高了催化剂的抗湿气性能。较小粒径的Co₃O₄与CeO₂产生的强相互作用可使CeO₂向Co₃O₄提供氧,因而间接提供了CO氧化需要的氧。     

辣根过氧化物酶的电化学固定化及其对H2O2的生物电催化还原作用

利用电化学固定化方法制备了聚吡咯/辣根过氧化物酶(PP/HRP)膜电极,并研究了其电化学行为。在除氧的磷酸盐缓冲液介质中,PP/HRP电极加速H₂O₂的还原,归因于酶加成物的直接电子传递。探索HRP与电子传递体K₄Fe(CN)₆在聚吡咯(PP)膜中的同时固定化条件及其膜电极的电化学行为,实验证实,K₄Fe(CN)₆在酶膜中的存在使得H₂O₂的还原电位强烈正移,在-0.05V的工作电位下能对H₂O₂进行检测,相应的电极过程可用间接氧化还原催化机理解释。     

担载的Co2(CO)6(PBu3)2络合物的表面化学研究

本文采用红外光谱,紫外漫反射光谱,程序升温分解技术以及X-光电子能谱综合研究了Co₂(CO)(PBu₃)₂羰基络合物与Zr(OH)₄、ZrO₂、Al₂O₃、TiO₂和SiO₂等氧化物担体之间的相互作用及其在真空中加热分解和在He或H₂气流中的程序升温脱羰基过程。     

核壳结构Co3O4@MnOx整体式催化剂的碳烟催化燃烧性能

采用两步水热法在泡沫镍基底上合成了具有纳米棒形貌的Co₃O₄@MnO_x整体式催化剂,通过X射线衍射、X射线能谱分析、氢气-程序升温还原、X射线光电子能谱、拉曼光谱和碳烟-程序升温还原等手段对催化剂进行表征,在微型固定床反应器上评价了其催化碳烟燃烧性能,通过等温动力学实验探究了催化剂的本征活性。结果表明,Co₃O₄@MnO_x催化剂呈现了以Co₃O₄为核、以MnO_x为壳的核壳结构。与催化剂Co-NW相比,Co₃O₄@MnO_x催化剂中Co₃O₄与MnO_x之间的相互作用使其表面产生了更多高价物种Mn⁴⁺和Mn³⁺以及更多的表面氧空位,其氧化还原性能提高,催化剂的活性氧物种数量增加了两倍,催化性能得到改善,在NO存在的反应气氛中...     

基于磺酰基杯[4]芳烃的Co16笼簇的合成、结构及电化学性质

以氯化钴、 对叔丁基磺酰杯[4]芳烃(H₄TC4A-SO₂)和非对称性3-(1H-四唑-5-基)苯甲酸(H₂L)为原料, 通过溶剂热法合成了一个具有四面体配位笼结构的16核化合物[Co₁₆(TC4A-SO₂)₄(OH)₄(L)₈]·[(C₈H₂₀N)(C₄H₁₂N)₂(C₂H₈N)]·solvent(Co₁₆-TC4A-SO₂). 采用X射线单晶衍射、 X射线粉末衍射、 热重分析、 红外光谱方法对配合物进行了表征. 将Co₁₆-TC4A-SO₂笼簇直接负载到碳纸上(Co₁₆-TC4A-SO₂/CP)用作工作电极, 其对析氧反应(OER)展现出较好的催化性能. 在1 mol/L KOH中, Co₁₆-TC4A-SO₂/CP在343.8 mV的过电位下达到10.0 mA/cm ²电流密度, Tafel斜率为79.31 mV/dec, 并且在20.0 mA/cm ²电流密度下表现出长达48 h的催化稳定性.     

气相色谱法研究配位化合物的热稳定性(Ⅶ)——Ni(Ⅱ)、Co(Ⅱ)草酸配合物的热分解及产物的催化性能

镍(Ⅱ)、钴(Ⅱ)草酸配合物在氢气中热分解时产生CO₂和CO,并发生加氢催化反应.CoC₃O₄和NiC₂O₄的分解产物CO₂加氢活性很快降低;K₂O等具有分散金属的作用。CoC₂O₄/Al₂O₃和K₂^{[Co(C₂O₄)₂]}/Al₂O₃体系具有Al₂(C₃O₄)₃的分解特征。C₂O₄^2-在Al₂O₃表面能形成表面配合物,在Al₂O₃表面Co(Ⅱ)的还原较为困难。     

介孔Co3O4多面体的制备及电化学性能

通过水热处理Co(NO₃)₂与(NH₄)₂S₂O₈合成了CoOOH多面体, 再经高温煅烧得到具有介孔结构的Co₃O₄多面体; 利用扫描电子显微镜(SEM)、 透射电子显微镜(TEM)、 X射线衍射(XRD)和N2吸附\|脱附实验等手段对其结构和组成进行了表征; 研究了反应时间、 反应温度及(NH₄)₂S₂O₈浓度等因素对CoOOH多面体形貌的影响, 分析了CoOOH多面体的形成机理. 性能测试结果表明, 该介孔Co₃O₄多面体具有良好的葡萄糖电化学检测活性, 检测线性范围为0.05~1.8 mmol/L, 响应灵敏度为148 μA·cm^-2·mmol·L^-1, 检出限为1 μmol/L.     

Heterogeneous activation of oxone using Co3O4

This study explores the potential of heterogeneous activation of Oxone (peroxymonosulfate) in water using cobalt oxides. Two commercially available cobalt oxides, CoO and Co3O4 (CoO.Co2O3) were tested for the activation of peroxymonosulfate and the consequent oxidation of 2,4-dichlorophenol (2,4-DCP) via a sulfate radical mechanism. Both systems, CoO/Oxone and Co3O4/Oxone, were tested at acidic and neutral pH and compared with the homogeneous Co(NO3)2/Oxone. The activity of these systems was evaluated on the basis of the induced transformation of 2,4-DCP as well as the dissolution of cobalt occurred after 2 h of reaction. It was observed that only Co3O4 activates peroxymonosulfate heterogeneously, with its heterogeneity being more pronounced at neutral pH. Both CoO and Co2O3 contained in Co3O4 might be responsible for the observed heterogeneity, and the relative mechanisms are further discussed here. To our knowledge, this is perhaps the first study that documents the heterogeneous activation of peroxymonosulfate with cobalt, the best-known catalyst-activator for this inorganic peroxide.     

Optical and physical properties of cobalt oxide films electrogenerated in bicarbonate aqueous media

For the first time, cobalt oxide films that are highly protective against localized corrosion and depicting a wide variety of bright and uniform colors due to light interference, have been successfully electrogenerated on polycrystalline cobalt disk electrodes under potentiostatic polarization in a mild aqueous bicarbonate medium. Open circuit potential measurements have shown the formation of a film with a bilayered structure, organized as a thin Co3O4 outer layer and a thick CoO inner layer. The existence of Co3O4 as a thin outer layer, previously postulated from galvanostatic reduction experiments, has been confirmed from XPS analysis. Raman spectroscopy, performed using a very low laser intensity, has shown that the films are mainly composed of CoO. The broadness of the Raman bands observed is associated to the amorphous character of the film, a result that has been confirmed by spectroscopic ellipsometry and X-ray diffraction analysis. Overall film thicknesses, well controlled by the anodization duration, were determined and correlated using mechanical (atomic force microscopy and profilometry) and spectroscopic (specular UV-vis-NIR reflectance and ellipsometry) techniques. Spectroscopic ellipsometry, using a simple amorphous dispersion model, has proved efficient for measuring thicknesses of films ranging from 31 to 290 nm with very low standard deviations. The real part of the complex refractive indices of these films, ranging from 1.8 to 2.2 (at lambda = 632.8 nm) depending on the anodization duration, is in good agreement with values reported in the literature for CoO. The film with the highest refractive index, and consequently the more densely packed structure, was obtained following a 30-minute anodization period.     

铈基与钴基Co3O4-CeO2氧载体上甲烷化学链转化特性: 产物选择性控制

采用水热法制备了Co₃O₄/CeO₂(x)[x为钴铈原子摩尔比n(Co):n(Ce)=6:49:1]和Ce_1-yCo_yO_2-δ(y=0.10.4)2个系列复合氧化物, 并表征了材料的物理化学性质, 考察了这些氧化物作为氧载体参与甲烷化学链转化(化学链燃烧和化学链部分氧化)的反应性能. 结果表明, 2类复合氧化物的甲烷反应活性均明显优于单一氧化物CeO₂或Co₃O₄, 但2类氧载体上的甲烷反应产物的选择性具有明显差异. Ce_1-yCo_yO_2-δ氧载体形成了Ce-Co-O固溶体, 储氧能力明显增强, 体相晶格氧迁移速率与甲烷活化速率匹配较好, 甲烷反应产物以CO和H₂的合成气为主, 有利于甲烷的化学链部分氧化. Co₃O₄/CeO₂(x)氧载体中CeO₂与Co₃O₄之间的相互作用改善了材料的储氧能力和氧化活性, 其与甲烷反应时主要生成CO₂, 有利于甲烷化学链燃烧. 连续性化学链循环实验表明, 2类氧载体均具有较好的再生性能和循环稳定性.     

Nature of catalytic activities of CoO nanocrystals in thermal decomposition of ammonium perchlorate

This work addresses the chemical nature of the catalytic activity of X-ray "pure" CoO nanocrystals. All samples were prepared by a solvothermal reaction route. X-ray diffraction indicates the formation of CoO in a cubic rock-salt structure, while infrared spectra and magnetic measurements demonstrate the coexistence of CoO and Co 3O 4. Therefore, X-ray "pure" CoO nanocrystals are a unique composite structure with a CoO core surrounded by an extremely thin Co 3O 4 surface layer, which is likely a consequence of the surface passivation of CoO nanocrystals from the air oxidation at room temperature. The CoO core shows a particle size of 22 or 280 nm, depending on the types of the precursors used. This composite nanostructure was initiated as a catalytic additive to promote the thermal decomposition of ammonium perchlorate (AP). Our preliminary investigations indicate that the maximum decomposition temperature of AP is significantly reduced in the presence of CoO/Co 3O 4 composite nanocrystals and that the maximum decomposition peak shifts toward lower temperatures as the loading amount of the composite nanocrystals increases. These findings are different from the literature reports when using many nanoscale oxide additives. Finally, the decomposition heat for the low-temperature decomposition stages of AP was calculated and correlated to the chemical nature of the CoO/Co 3O 4 composite nanostructures.     

Oxidation of electrodeposited cobalt electrodes in an alkaline electrolyte

The oxidation of electrodeposited Co electrodes has been studied in 0.1 M KOH_aq at potentials more negative than ?880 mV vs. Hg|HgO by means of electrochemical quartz crystal microbalance (EQCM) and rotating ring disk electrode coupled with cyclic voltammetry (CV) and chronoamperometry (CA). Dissolution of cobalt was found to be insignificant and does not constitute a step in the overall process of formation of the oxidised layer. The irreversibility of the oxidation process depends on the electrode potential and oxidation time. The composition of the oxidised layer depends on the oxidation potential: Co(OH)₂ is formed at more negative potentials, while at more positive potentials CoO is the prevailing product. The results obtained by means of three techniques (CV, CA and EQCM) reveal that at potentials not higher than ?880 mV, the oxidation of Co follows a direct logarithmic law. The mechanism of the process is discussed.     

Ni(OCH3)2/SiO2催化剂的制备及其合成碳酸二甲酯的反应性能

采用表面改性和离子交换相结合的方法，制备了负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2催化剂。利用IR、TPD、TPSR和微反技术，考察了催化剂的表面结构以及CO2、CH3OH在催化剂表面上的化学吸附和反应性能。结果表明，负载型单核金属甲氧基配合物Ni(OCH3)2/SiO2中，Ni^2 与载体SiO2表面的O^2-以双齿形式配位；在催化剂表面存在CO2的桥式吸附态和甲氧碳酸酯基物种两种吸附态，CH3OH则只有一种分子吸附态。在373-473K条件下，CO2和CH3OH在催化剂上的反应物主要是DMC、H2O以及少量的CO、CH4和CH2O，催化剂的活性由表面甲氧碳酸酯基物种与分子吸附态甲醇的反应决定的。讨论了催化剂上CO2和CH3OH的活化过程及吸附态的形成机理。     

Enhanced activity of gold-supported cobalt oxide for the electrochemical evolution of oxygen

Scanning electron microscopy, linear sweep voltammetry, chronoamperometry, and in situ surface-enhanced Raman spectroscopy were used to investigate the electrochemical oxygen evolution reaction (OER) occurring on cobalt oxide films deposited on Au and other metal substrates. All experiments were carried out in 0.1 M KOH. A remarkable finding is that the turnover frequency for the OER exhibited by ～0.4 ML of cobalt oxide deposited on Au is 40 times higher than that of bulk cobalt oxide. The activity of small amounts of cobalt oxide deposited on Pt, Pd, Cu, and Co decreased monotonically in the order Au > Pt > Pd > Cu > Co, paralleling the decreasing electronegativity of the substrate metal. Another notable finding is that the OER turnover frequency for ～0.4 ML of cobalt oxide deposited on Au is nearly three times higher than that for bulk Ir. Raman spectroscopy revealed that the as-deposited cobalt oxide is present as Co(3)O(4) but undergoes progressive oxidation to CoO(OH) with increasing anodic potential. The higher OER activity of cobalt oxide deposited on Au is attributed to an increase in fraction of the Co sites present as Co(IV) cations, a state of cobalt believed to be essential for OER to occur. A hypothesis for how Co(IV) cations contribute to OER is proposed and discussed.     

Effect of cobalt precursors on the dispersion, reduction, and CO oxidation of CoO(x)/γ-Al2O3 catalysts calcined in N2

The present work tentatively investigated the effect of cobalt precursors (cobalt acetate and cobalt nitrate) on the physicochemical properties of CoO(x)/γ-Al(2)O(3) catalysts calcined in N(2). XRD, Raman, XPS, FTIR, and UV-vis DRS results suggested that CoO/γ-Al(2)O(3) was obtained from cobalt acetate precursors and CoO was dispersed on γ-Al(2)O(3) below its dispersion capacity of 1.50 mmol/(100 m(2) γ-Al(2)O(3)), whereas Co(3)O(4)/γ-Al(2)O(3) was obtained from cobalt nitrate precursors and Co(3)O(4) preferred to agglomerate above the dispersion capacity of 0.15 mmol/(100m(2) γ-Al(2)O(3)). Compared with Co(3)O(4)/γ-Al(2)O(3), CoO/γ-Al(2)O(3) catalysts were difficult to be reduced and easy to desorb oxygen species at low temperatures and presented high activities for CO oxidation as proved by H(2)-TPR, O(2)-TPD, and CO oxidation model reaction results. A surface incorporation model was proposed to explain the dispersion and reduction properties of CoO/γ-Al(2)O(3) catalysts.     

La1-xSrxCoC3钙钛矿在碱性溶液中的析氧电催化

 稳态极化研究结果表明, La1-xSrxCoO3电极的析氧Tafel斜率为2303RT/F, OH-的反应级数近似为1, 在阳极析氧反应中, OH-的电化学脱附为速度控制步骤. 随着La1-xSrxCoO3中Sr含量的增加,氧化物表面的粗糙度提高,当x=02时,析氧反应的活化能最低,即La0.8Sr0.2CoO3表现有最高的析氧电催化活性.     

Keggin结构阳离子[AlO4Al12(OH)24(H2O)12]7+与杂多阴离子构筑的新型无机纳米簇凝胶

多金属氧酸盐（Polyoxometalates POMs）化学已成为材料科学、医学、催化及光化学等诸多领域的活跃研究课题[1～5]。