含有聚醚链段的可溶性聚酰亚胺气体分离膜材料及其性能

将4,4'-六氟亚异丙基-邻苯二甲酸酐(6FDA)和1,3-苯二胺(mPDA)与二端氨基聚醚缩聚, 得到含有聚醚柔性链段的聚酰亚胺气体分离膜材料. 所合成的共聚聚酰亚胺在N-甲基吡咯烷酮(NMP)和四氢呋喃(THF)等有机溶剂中具有良好的溶解性能. 研究了O2, N2, H2, CH4和CO2在聚酰亚胺均质膜中的渗透性能, 考察了二端氨基聚醚的含量、链长和化学结构对气体渗透性能的影响. 结果表明, 聚醚链段的引入增大了气体的扩散系数, 气体的渗透系数显著增大; 聚醚链段与CO2相对较强的相互作用, 增大了对CO2/N2的溶解选择性, CO2/N2的分离性能优于CO2/CH4, 同时CO2比H2优先透过膜.     

聚酰亚胺6FDA-mPDA及其非对称中空纤维膜的气体渗透性能

用两步法制备了聚酰亚胺2,2＇-双（3,4-二羧酸苯基）六氟丙烷二酐（6FDA）-1,3-苯二胺（mPDA）．测定了聚合物致密膜的密度、自由体积分率和玻璃化转变温度．制备了不同干纺距离下具有超薄致密皮层的聚酰亚胺中空纤维膜．制备的中空纤维膜在25℃,0．5MPa下,O2的渗透速率为19．10GPU,O2／N2分离系数为5．99,CO2的渗透速率为106．34GPU,CO2／CH4的分离系数为82．00．致密皮层的厚度约为96nm．考察了操作温度对膜性能的影响,结果表明,随着温度的升高,膜的渗透速率增大,分离系数减小．物理老化对膜性能的实验结果表明,随着老化时间的增加,膜的渗透速率减小,分离系数增大．膜的致密层厚度影响膜的老化性能．     

一种可溶性聚酰亚胺的合成与性能研究

选用三苯二醚四酸二酐 (HQDPA)和二甲基二苯甲烷二胺 (DMMDA)为单体 ,在NMP中通过低温溶液缩聚 化学亚胺化法合成了高分子量可溶性聚醚酰亚胺PI(HQDPA DMMDA) .通过FT IR、WAXD、TG DTG以及DSC等手段对聚酰亚胺的结构和性能进行了表征 .结果表明 ,合成的PI为无规高分子结构 ,平均分子链间距为 0 5 16 3nm ;易溶于N 甲基吡咯烷酮、N ,N 二甲基乙酰胺和四氢呋喃等极性溶剂中 ;其 10 %的分解温度为5 2 8℃ ,玻璃化转变温度Tg 为 2 5 1℃ ;断裂伸长率为 2 4 % ,断裂强度为 10 7MPa ;2 5℃时 ,PI均质膜的透H2 系数为 3 80 9Barrer ,H2 N2 、H2 CH4 的理想分离系数为 16 6 9、2 14 0 ;其透N2 、O2 、CO2 和CH4 系数均在 0 0 18～0 5 76Barrer之间     

新型双苯并环己酮芳亚胺镍(Ⅱ)催化降冰片烯与甲基丙烯酸丁酯共聚合

采用自制的新型双苯并环己酮芳亚胺镍催化剂双苯并环己酮-2,6-二甲基苯亚胺镍(Ⅱ)(Ni{C10H8(O)C[2,6-C6H3(CH3)2N]CH3}2,C1)和双苯并环己酮-2,6-二氯苯亚胺镍(Ⅱ)(Ni{C10H8(O)C[2,6-C6H3Cl2N]CH3}2,C2)与三五氟苯硼[B(C6F5)3]结合,在一定的反应条件下可高效催化降冰片烯(NB)与甲基丙烯酸正丁酯(n-BMA)的乙烯基加成共聚合.提出了催化聚合时存在的可能失活机理;研究了不同单体投料比对催化活性、产率及产物性能的影响.根据Kelen-Tüds方法分别估算出2种单体在不同催化体系下的竞聚率,即当催化体系为C1/B(C6F5)3时,竞聚率rn-BMA=0.02,rNB=16.28,rNB·rn-BMA=0.32;当催化体系为C2/B(C6F5)3时,rn-BMA=0.01,rNB=64.83,rNB·rn-BMA=0.65.结果表明,2种单体在2种体系催化下均为无规共聚合.     

基于三蝶烯结构D3h对称性聚酰亚胺的合成及性能研究

以四氯邻氨基苯甲酸和蒽经Diels-Alder反应得到1,2,3,4-四氯三蝶烯,再经硝化、还原得到2,6-二氨基-13,14,15,16-四氯三蝶烯二胺单体.该二胺与双酚A二酐(BPADA)、六氟二酐(6FDA)和3,3’,4,4’-二苯甲酮四羧酸二酐(BTDA)经两步法缩聚得到系列聚酰亚胺.对2,6-二氨基-13,14,15,16-四氯三蝶烯二胺单体进行了1H-NMR,13C-NMR,FTIR表征,对所合成聚酰亚胺进行了1H-NMR、FTIR结构表征及溶解性、热性能、特性粘度、BET等测试.结果表明,含四氯三蝶烯结构的聚酰亚胺具有优异的溶解性,能溶于DMAc、DMF、NMP、THF、吡啶、间甲酚等有机溶剂,其中基于双酚A二酐和六氟二酐的聚酰亚胺在室温下能溶于氯仿中.聚合物具有良好的热性能,在0~300℃之间没有发现其玻璃化转变温度以及10%的热失重温度均高于500℃.聚合物可形成颜色较浅的透明薄膜,其中基于双酚A二酐的聚酰亚胺薄膜为无色透明.基于六氟二酐的聚酰亚胺BET比表面积为370 m2/g,是一种新型多孔聚合物.     

基于不同碱基含量的[FeFe]-氢化酶模型化合物功能化聚合物的合成与表征

将含二炔基的[2Fe2S]模型化合物[Fe2(μ-SCH2C≡CH)2(CO)6](A)和双叠氮单体2,6-(N3CH2)Py(B,Py=吡啶)与含碱性基团的双炔单体(2-Py CH2)N(CH2C≡CH)2(C,Py=吡啶)通过"点击反应"以不同比例进行共聚,得到了6种含不同碱基量的[FeFe]-氢化酶模型化合物功能聚合物Polymer-1~Polymer-6。通过红外光谱、硫元素分析、热重、扫描电镜和电化学对这些聚合物进行了表征。红外光谱和电化学研究表明二铁六羰基单元A以二铁五羰基的形式存在于聚合物中。在共聚过程中,增加单体C的含量能显著改变聚合物的形貌和增加其在有机溶剂中的溶解度,同时热稳定性也有所增加。这些聚合物在含有醋酸的DMF介质中催化质子还原的行为表明,通过单体C引入的碱性基团所形成的次级配位环境对二铁中心的催化性能有显著影响。     

不同比例的s-BPDA/i-BPDA型聚酰亚胺共聚结构与性能关系

由不同比例的二酐单体3,3′,4,4′-联苯四酸二酐(s-BPDA)/2,2′,3,3′-联苯四酸二酐(i-BPDA)与二胺单体4,4′-二氨基二苯醚(4,4′-ODA)制得了一系列共聚可溶聚酰亚胺. 采用DSC 、TGA和拉伸等测试方法对所得共聚聚酰亚胺进行了表征, 实验结果表明, 所得聚酰亚胺具有优异的力学性能和热稳定性, 并且随着i-BPDA含量的增加, 聚酰亚胺的溶解性提高, 玻璃化转变温度(Tg)升高, 中间体聚酰胺酸的固有黏度降低.     

新型大环双核铜配合物[Cu2（H2L）2（SO4）2（H2O）6]·CH3OH·6H2O的合成及其晶体结构与催化性能

H2L[N,N’-二(3-吡啶基)-2,6-吡啶羧酸二酰胺]与CuSO4.5H2O反应合成了新型大环双核铜配合物——[Cu2(H2L)2(SO4)2(H2O)6]·CH3OH·6H2O(1),其结构经IR,XRD和元素分析表征。1属单斜晶系,空间群P21/C,晶胞参数a=26.870(5),b=7.563 7(15),c=28.316(6),α=90°,β=114.91(3)°,γ=90°。1在催化2,6-二甲基苯酚氧化偶联反应时表现出较好的选择性及催化活性。     

阳离子烷基钪配合物催化体系催化乙烯与丙烯共聚合的研究

双烷基钪配合物LSc(CH2SiMe3)2(L=(2,6-iPr2C6H3)NC(Me)CHPPh2N(2,6-Me2C6H3))在助催化剂[Ph3C][B(C6F5)4]的作用下能够高活性地催化乙烯和丙烯共聚.在反应温度30℃和乙烯与丙烯常压(1.0×105Pa)下聚合,共聚活性能够达到7.5×105g(PE)mol-1h-1(105Pa)-1.单体的竞聚率分别为rE=29.75和rP=0.015.13C-NMR和DSC分析表明所得到的乙丙共聚物是弹性体,且丙烯单体无规分布在共聚物链中.     

可溶性共聚酰亚胺的合成与性能研究

以均苯四甲酸二酐(PMDA)为二酐单体,4,4′-亚甲基二(2-特丁基苯胺)(MBTBA)和对苯二胺(PDA)为二胺单体,经高温溶液缩聚合成了一系列可溶性共聚聚酰亚胺,采用IR、NMR、GPC、UV-Vis、TGA、DMA等测试方法对所得共聚酰亚胺进行了表征,并采用1H-NMR谱来确定其共聚组成,考察了两种二胺单体的不同摩尔配比对共聚酰亚胺溶解性、耐热性和透光性的影响.     

Synthesis, characterization, and gas permeation properties of 6FDA-2,6-DAT/mPDA copolyimides

The goal of this work is to explore new polyimide materials that exhibit both high permeability and high selectivity for specific gases. Copolyimides offer the possibility of preparing membranes with gas permeabilities and selectivities not obtainable with homopolyimides. A series of novel fluorinated copolyimides were synthesized with various diamine compositions by chemical imidization in a two-pot procedure. Polyamic acids were prepared by stoichiometric addition of solid dianhydride in portions to the diamine(s). The gas permeation behavior of 2,2′-bis(3,4′-dicarboxyphenyl) hexafluoropropane dianhydride(6FDA)-2,6-diamine toluene (2,6-DAT)/1,3-phenylenediamine (mPDA) polyimides was investigated. The physical properties of the copolyimides were characterized by IR, DSC and TGA. The glass transition temperature increased with increase in 2,6-DAT content. All the copolyimides were soluble in most of the common solvents. The gas permeability coefficients decreased with increasing mPDA content. However, the permselectivity of gas pairs such as H₂/N₂, O₂/N₂, and CO₂/CH₄ was enhanced with the incorporation of mPDA moiety. The permeability coefficients of H₂, O₂, N₂, CO₂ and CH₄ were found to decrease with the increasing order of kinetic diameters of the penetrant gases. 6FDA-2,6-DAT/mPDA (3:1) copolyimide and 6FDA-2,6-DAT polyimide had high separation properties for H₂/N₂, O₂/N₂, CO₂/CH₄. Their H₂, O₂ and CO₂ permeability coefficients were 64.99 Barrer, 5.22 Barrer, 23.87 Barrer and 81.96 Barrer, 8.83 Barrer, 39.59 Barrer, respectively, at 35°C and 0.2 MPa (1 Barrer = 10⁻¹⁰ cm³ (STP)·cm·cm⁻²·s⁻¹·cmHg⁻¹) and their ideal permselectivities of H₂/N₂, O₂/N₂ and CO₂/CH₄ were 69.61, 6.09, 63.92 and 53.45, 5.76, 57.41, respectively. Moreover, all of the copolyimides studied in this work exhibited similar performance, lying on or above the existing upper bound trade-off lines between permselectivity and permeability. They may be utilized for commercial gas separation membrane materials. __________ Translated from Acta Polymerica Sinica, 2008, 8 (in Chinese)     

聚乙烯醇缩醛膜的加湿透气性

前曾报道聚乙烯醇(PVA)与脂肪醛缩合后亲水性的羟基减少,影响到其薄膜的透湿性和透气性,本文考察PVA及其三种脂肪族缩醛物膜在加湿条件下的透气性。 PVA膜为10％PVA水溶液用流涎法制成。缩醛膜为PVA缩醛衍生     

聚酰亚胺膜的分子结构与透气性能之间关系的研究 I.

膜法是近十余年来发展起来的一种新型分离技术,是分离混合气体最为节能的方法。其关键是气体膜分离器,它的分离特性、使用条件和寿命主要取决于膜材料的选择。目前工业上使用的高分子气体分离膜材料主要有聚砜、醋酸纤维素、改性聚苯醚、改性聚硅氧烷、     

GAS SEPARATION PROPERTIES OF FREESTANDING FILM OF POLYANILINE

The gas separation properties of free- standing film of polyaniline (PANI) for gas pairs of He/N2, H_2/N_2. CO_2/N_2 and CO_2/CH_4 at room temperature were measured as a function of the protonation state. Variation of the gas permeabilities coefficient of PANI with an insulator to metal transition upon the protonation processes was observed, which might be due to a change in both gas solubility coefficient and diffusion coefficient with the protonation state.     

几种聚醚酰亚胺的气体透过性能

本文研究了一系列芳环聚醚酰亚胺(PEI)对H_2、CO_2、O_2和N_2的透过性能与分子结构之间的关系。单醚酐型聚醚酰亚胺具有较高的透氢系数和H_2/N_2分离系数。由半刚性的4,4′-二氨基二苯酮(DABP)与柔性的三苯二醚四酸二酐(HQDPA)、二苯醚四酸二酐(ODPA)缩聚得到的聚醚酰亚胺具有很高的H_2/N_2、CO_2/N_2和O_2/N_2分离系数。     

温度和压力对六氟二酐型聚酰亚胺的透气性能的影响

本文研究了温度和压力对五种六氟二酐（６ＦＤＡ）型聚酰亚胺膜对Ｈ_２、ＣＯ_２、Ｏ_２、Ｎ_２和ＣＨ_４五种气体透过性能的影响．在３０－１００℃区间，五种聚酰亚胺的透气系数与温度的关系均符合Ａｒｒｈｅｎｉｕｓ关系式；在０．３－１．２ＭＰａ区间，压力对透气系数的影响很小．６ＦＤＡ－４，４＇－二氨基二苯酮（ＤＡＢＰ）和６ＦＤＡ－３，３＇－二甲基二苯甲烷二胺（ＤＭＭＤＡ）在１００℃仍然具有较大的透气选择系数，是比较好的气体分离膜材料．     

Formation of high-performance 6FDA-2,6-DAT asymmetric composite hollow fiber membranes for CO2/CH4 separation

We report that 6FDA-2,6-DAT polyimide can be used to fabricate hollow fiber membranes with excellent performances for CO₂/CH₄ separation. In order to simplify the hollow fiber fabrication process and verify the feasibility of 6FDA-2,6-DAT hollow fiber membranes for CO₂/CH₄ separation, a new one-polymer and one-solvent spinning system (6FDA-2,6-DAT/N-methyl-pyrrolidone (NMP)) with much simpler processing conditions has been developed and the separation performance of newly developed 6FDA-2,6-DAT hollow fiber membranes has been further studied under the pure and mixed gas systems.Experimental results reveal that 6FDA-2,6-DAT asymmetric composite hollow fiber membranes have a strong tendency to be plasticized by CO₂ and suffer severely physical aging with an initial CO₂ permeance of 300 GPU drifting to 76 GPU at the steady state. However, the 6FDA-2,6-DAT asymmetric composite hollow fibers still present impressive ultimate stabilized performance with a CO₂/CH₄ selectivity of 40 and a CO₂ permeance of 59 GPU under mixed gas tests. These results manifest that 6FDA-2,6-DAT polyimide is one of promising membrane material candidates for CO₂/CH₄ separation application.     

Gas transport properties of 6FDA-TMPDA/MOCA copolyimides

The gas permeation behavior of 2,2′-bis(3,4′dicarboxyphenyl) hexafluoropropane dianhydride(6FDA)-2,4,6-trimethyl-1,3-phenylenediamine (TMPDA)/4,4′-methylene bis(2-chloroaniline) (MOCA) copolyimides was investigated by systematically varying the diamine ratios. All the copolyimides were soluble in most of the common solvents. The gas permeabilities and diffusion coefficients decreased with increasing MOCA content; however, the permselectivity of gas pairs such as H₂/N₂, O₂/N₂, CO₂/CH₄ was enhanced with the incorporation of MOCA moiety. Moreover, all of the copolyimides studied in this work exhibited performance near, lying on or above the existing upper bound trade-off line between permselectivity and permeability.     

Structures that should be Described in Higher-Symmetry, Centrosymmetric Space Groups. Part 2. The Structures of [Ni(C_5H_4NO-2-CH=N-CH_2CH_2-N=CH-2-C_5H_4NO)(H_2O)_2]- (ClO_4)_2, {Ni[C_5H_4NO-2-CH=N-CH(CH_3)CH_2-N=CH-2- C_5H_4NO](H_2O)_2}

1　ＩＮＴＲＯＤＵＣＴＩＯＮＳｅｖｅｒａｌｉｎｃｏｒｒｅｃｔｓｐａｃｅｇｒｏｕｐｓｈａｖｅｂｅｅｎｒｅ ａｓｓｉｇｎｅｄｂｙｍａｋｉｎｇｕｓｅｏｆｓｉｍｕｌａｔｅｄｓｔｒｕｃｔｕｒｅｆａｃｔｏｒｓ;ｈｏｗｅｖｅｒ,ｔｈｅｃｒｕｘｏｆｔｈｉｓｏｒａｎｙｓｐａｃｅｇｒｏｕｐｒｅｖｉｓｉｏｎｉｓｔｈｅａｃｃｕｒａｔｅｒｅｐｏｒｔｉｎｇｏｆｔｈｅｓｐａｃｅｇｒｏｕｐａｎｄａｔｏｍｉｃｃｏｏｒｄｉｎａｔｅｓｏｆｔｈｅｉｎｃｏｒｒｅｃｔｌｙｄｅｔｅｒｍｉｎｅｄｓｔｒｕｃｔｕｒｅｓｉｎｃｅｔｈｅｔｒｕｅｓｔｒｕｃ…     

C_2h_3自由基与O_2反应机理的量子化学研究

用量子化学从头计算中UMP2(full)方法优化了C_2H_3自由基与O_2反应通道上 驻点（反应物、中间体、过渡态和产物）的几何构型，在Gaussian-3(G3)水平上计 算了它们的能量。在此基础上计算了该反应通道上各基元反应的反应活化能。通过 我们的研究发现，C_2H_3自由基与氧气反应存在着三元环、四元环和五元环反应机 理，且分别生成不同的产物，从反应活化能的计算结果扯CH_2O和CHO是反应的主要 产物，其次还可能生成CH_3 + CO_2, CH_2CO_2 + H, C_2H_2 + O_2H和COHCOH + H等产物，且它们生成几率逐渐减少，我们对生成产物CH_2O + CHO, CH_3 + CO_2, C_2H_2 + O_2H和COHCOH + H四条反应通道化学反应热的计算结果与实验吻 合较好。