分子印迹聚合物的制备及孔结构研究

以N 叔丁氧羰酰 L 色氨酸和N 叔丁氧羰酰 L 酪氨酸为印迹分子 ,分别采用光引发聚合和热引发聚合制备了分子印迹聚合物 ,并对聚合物的手性识别能力进行了色谱评价 .结果表明 ,制备的分子印迹聚合物对印迹分子具有特异性的吸附作用 ,光引发聚合的N 叔丁氧羰酰 L 色氨酸的印迹聚合物对印迹分子的选择性因子达到 2 .318,热引发聚合的N 叔丁氧羰酰 L 酪氨酸对印迹分子的选择性因子为 1 373 进一步研究了分子印迹聚合物的孔结构 ,发现光引发聚合的分子印迹聚合物与空白聚合物的孔结构差别比热引发聚合的分子印迹聚合物与空白聚合物的差别更为明显 .对印迹分子洗脱前后的印迹聚合物的孔结构研究进一步表明 ,印迹分子存在于不同类型的孔中 .     

乳液聚合法制备亚微米级分子印迹聚合物微球

以西咪替丁为印迹分子，2-丙烯酰胺-2-甲基丙磺酸(AMPS)为功能单体，三羟甲基丙烷三甲基丙烯酸甲酯(TRIM)为交联剂，采用乳液聚合法制备了亚微米级分子印迹聚合物微球．利用扫描电镜对此聚合物微球的形貌进行了观察，探讨了影响乳液稳定性、粒径大小与分布的主要因素，重点对聚合工艺和配方进行了优化，并将所得的聚合物用作吸附剂研究了其分子识别与选择性能．研究表明，乳液聚合法能够制得单分散性较好的、平均粒径在0．169μm～0．407μm的分子印迹聚合物微球，且该微球对其印迹分子呈现出较好的特异识别与选择性能，当以苯丙氨酸为竞争分子时，分离因子可达1．70．     

氟哌酸分子印迹共混膜的制备及结构表征

以氟哌酸为模板分子,α-甲基丙烯酸为功能单体,三甲氧基丙烷三甲基丙烯酸酯为交联剂,利用本体聚合方法制备了具有特异选择性的氟哌酸分子印迹聚合物,并利用聚砜与氟哌酸分子印迹聚合物共混的方法制备了分子印迹聚合物膜.运用红外光谱分析和透射电子显微镜研究了氟哌酸分子印迹聚合物的结构.运用扫描电子显微镜研究了分子识别膜的机理和吸附性能,运用平衡结合实验法证明了分子识别膜对氟哌酸表现出了较高的选择性.     

分子印迹技术研究进展

分子印迹是制备具有分子特异识别功能聚合物的一种技术。本文从分子印迹聚合物的识别机理、分子印迹聚合制备条件和制备技术三个方面综述了分子印迹的研究进展,最后展望了分子印迹发展前景。引用文献66篇。     

金属卟啉分子印迹聚合物的合成与性能研究

以5-(4-羟基苯基)-10,15,20-三苯基卟啉锌为印迹分子,4-乙烯基吡啶为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了具有金属卟啉识别能力的分子印迹聚合物.紫外可见滴定光谱研究表明,功能单体与印迹分子在聚合前形成1:1的配合物.通过吸附试验、荧光光谱及斯卡查特分析法,考察了分子印迹聚合物对锌卟啉化合物的识别性能.结果表明,印迹聚合物对结构类似的卟啉化合物具有良好的识别能力,对印迹分子荧光性能的影响远大于其对应的非印迹聚合物.在浓度较低时,印迹聚合物对印迹分子的结合常数和最大结合量分别为:1.61×106L/mol和3.22×10-5mol/g.     

沉淀聚合法制备右旋邻氯扁桃酸分子印迹聚合物微球

以右旋邻氯扁桃酸为模板,丙烯酰胺、乙二醇二甲基丙烯酸酯分别为功能单体和交联剂,采用沉淀聚合法制备了分子印迹聚合物微球,讨论了反应介质用量、聚合温度、引发剂的种类和用量对印迹微球的影响。实验表明：分子印迹微球与传统本体聚合法制备的聚合物相比具有更高的特异识别能力,通过Scatchard分析研究了聚合物的选择结合性能,结果表明分子印迹聚合物微球在识别右旋邻氯扁桃酸分子的过程中存枉两类结合位点,而空白聚合物微球只存在一类结合位点。     

基于金属卟啉的分子印迹聚合物的合成及其对三唑类杀菌剂识别性能研究

以三唑类杀菌剂氟环唑为印迹分子,5-(4-甲基丙烯酰氧苯基)-10,15,20-三苯基卟啉锌为功能单体,乙二醇二甲基丙烯酸酯为交联剂,合成了新型的基于金属卟啉的分子印迹聚合物.紫外-可见光谱研究表明印迹分子与功能单体在聚合前形成1∶1配合物.通过选择性吸附和固相萃取表征研究了该印迹聚合物对氟环唑及具有类似化学结构的三唑类杀菌剂的识别能力,并与非印迹聚合物进行了比较,结果表明印迹聚合物具有良好的特异性识别性能,同时,印迹聚合物的交联度及吸附溶剂的极性对印迹效果有着显著影响.     

紫外光聚合法制备L-DBTA手性分子印迹聚合物的研究Ⅰ.紫外光聚合制备条件

以丙烯酸为功能单体,二苯甲酰-L-酒石酸(L-DBTA)为模板分子,三羟甲基丙烷三丙烯酸酯(TMPTA)为交联剂,采用光聚合方法合成了L-DBTA手性分子印迹聚合物,讨论了功能单体种类、功能单体用量、交联剂用量、引发剂用量、三乙胺用量、光聚合温度、光聚合时间、光强度等对L-DBTA手性分子印迹聚合物合成的影响。通过L-DBTA手性分子印迹聚合物对底物的结合实验分析,表明手性分子印迹聚合物对L-DBTA具有很好的识别性,L-DBTA的选择性比二苯甲酰-D-酒石酸(D-DBTA)高,其分离因子可达5．41。     

铅(Ⅱ)离子印迹聚合物的制备及其吸附性能的研究

利用分子印迹技术制备了重金属铅(Ⅱ)的印迹聚合物,并对其识别性能进行定量描述.以铅(Ⅱ)离子为模板,水杨醛肟为功能单体,二甲基丙烯酸乙二醇酯为交联剂,偶氮二异丁腈为引发剂,采用本体聚合法制备印迹聚合物.结果表明,与未印迹的聚合物相比较,印迹聚合物对铅(Ⅱ)离子具有较好的识别选择性,达到吸附平衡的时间为40min,Pb2...     

原位聚合那格列奈分子印迹手性固定相的分子识别特性研究

以手性药物那格列奈为模板分子，采用原位聚合法制备了具有特定识别性能和手性拆分能力的分子印迹聚合物，并用作高效液相色谱固定相实现了那格列奈与其对映体的手性拆分．通过静态结合方法考察了该聚合物的选择结合能力，并讨论了手性分离过程中的热力学性质．结果表明，原位聚合法制备的棒状聚合物固定相对模板分子及其对映体有很好的手性拆分性能．     

Molecularly imprinted polymer as a novel solid‐phase microextraction coating for the selective enrichment of trace imidazolinones in rice,peanut, and soil

The development and application of an imazethapyr molecularly imprinted polymer‐based solid‐phase microextraction coating were investigated. A novel molecularly imprinted polymer coating with imazethapyr as template was firstly prepared by a one‐step in situ polymerization method, and demonstrated specific selectivity to imidazolinone herbicides in complicated samples. The structural characteristics and extraction performance of the imazethapyr molecularly imprinted polymer coating were studied. The molecularly imprinted polymer coating was homogeneous, dense, and heat and solvent resistant. Adsorption capacity experiments showed that the molecularly imprinted polymer coating could selectively extract imazethapyr and its structural analogs, and the maximum adsorption capacity was 2.5 times as much as that of the nonimprinted polymer coating. A method for the determination of five imidazolinones by imazethapyr molecularly imprinted polymer solid‐phase microextraction coupled with high‐performance liquid chromatography was developed. The linear range was 0.50–50 μg/L for imazameth, imazamox, imazapyr acid, and imazethapyr, and 1.0–100 μg/L for imazaquin acid, and the detection limits were within the range of 0.070–0.29 μg/L. The method was applied to simultaneous and multiresidual determinations of trace imidazolinones in rice, peanut, and soil samples with satisfactory recoveries of 60.6–99.5, 79.1–123, and 61.3–116%, respectively, and relative standard deviations of 0.40–10%, which indicated that this method was suitable for the trace analysis of imidazolinones in complex food and environmental samples.     

Cost‐effective imprinting combining macromolecular crowding and a dummy template for the fast purification of punicalagin from pomegranate husk extract

The combination of molecular crowding and virtual imprinting was employed to develop a cost‐effective method to prepare molecularly imprinted polymers. By using linear polymer polystyrene as a macromolecular crowding agent, an imprinted polymer recognizable to punicalagin had been successfully synthesized with punicalin as the dummy template. The resulting punicalin‐imprinted polymer presented a remarkable selectivity to punicalagin with an imprinting factor of 3.17 even at extremely low consumption of the template (template/monomer ratio of 1:782). In contrast, the imprinted polymer synthesized without crowding agent, did not show any imprinting effect at so low template amount. The imprinted polymers made by combination of molecular crowding and virtual imprinting can be utilized for the fast separation of punicalagin from pomegranate husk extract after optimizing the protocol of solid‐phase extraction with the recovery of 85.3 ± 1.2%.     

1-氨基乙内酰脲分子印迹聚合物的制备和吸附性能研究

以1-氨基乙内酰脲(AHD)为模板分子,α-甲基丙烯酸(MAA)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用本体聚合方法合成了分子印迹聚合物(M IP),考察了模板分子与功能单体不同比例下制备的M IP对模板分子的吸附性能。通过Scatchard分析,表明该印迹聚合物上存在一类等价的吸附位点,其结合位点的离解常数KD=4.33mmol/L。     

伊诺沙星分子印迹聚合物的制备及分子识别性能研究

以伊诺沙星为印迹分子、甲基丙烯酸为功能单体、季戊四醇三丙烯酸酯为交联剂,合成了对伊诺沙星有较好选择性的印迹聚合物。利用铽敏化荧光,通过静态平衡结合法和Scatchard分析法研究了此印迹聚合物的结合能力和选择性,结果表明印迹聚合物对伊诺沙星有较高的亲和性和选择性。     

原位分子印迹法制备的连续棒型模板聚合物的手性识别

使用Ｒ－１－（１－萘基）乙胺为模板分子,α－甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,采用原位分子印迹分子制备了具有手性识别环境的连续棒型模板聚合物。色谱结果表明,这种连续棒型模板聚合物对模板分子Ｒ－１－（１－萘基）乙胺比对它的对映异构体Ｓ－１－（１－萘基）乙胺及其外消旋体具有更长的保留时间,更大的容量因子,展现了一定的手性识别能力。     

Uniform-sized molecularly imprinted polymer for (S)-naproxen selectively modified with hydrophilic external layer.

A uniform-sized molecularly imprinted polymer (MIP) for (S)-naproxen selectively modified with hydrophilic external layer has been prepared. First, the molecularly imprinted polymer for (S)-naproxen was prepared using 4-vinylpyridine and ethylene glycol dimethacrylate (EDMA) as a functional monomer and cross-linker, respectively, by a multi-step swelling and thermal polymerization method. Next, a 1:1 mixture of glycerol monomethacrylate (GMMA) and glycerol dimethacrylate (GDMA) was used for hydrophilic surface modification, and it was added directly to the molecularly imprinted polymer for (S)-naproxen 4 h after the start of molecular imprinting. The retention factors of all solutes tested were decreased with the surface modified molecularly imprinted polymer, compared with the unmodified molecularly imprinted polymer. However, chiral recognition of racemic naproxen was attained with the surface modified molecularly imprinted polymer as well as the unmodified molecularly imprinted polymer. Further, bovine serum albumin was completely recovered from the surface modified molecularly imprinted polymer. These results revealed that the chiral recognition sites of (S)-naproxen remained unchanged with hydrophilic surface modification, and that the molecularly imprinted polymer for (S)-naproxen was selectively modified with hydrophilic external layer. Preliminary results reveal that the surface modified molecularly imprinted polymer could be applicable to direct serum injection assays of (S)-naproxen.     

分子烙印聚合物作为高效毛细管电泳添加剂的研究

分子洛印聚合物（molecular imprinted polymer)是一种高选择的有分子记忆效应的主体分子,通常在非极性环境中制备和应用。该文在极性溶剂中利用离子化作用和疏水作用制备了非共价的分子烙印聚合物,并将其作为高效毛细管电泳流动相添加剂;在含水缓冲溶液条件下,研究了单体种类、分子烙印聚合物颗粒度和含量、缓冲溶液pH值以及分离电压对分子烙印聚合物识别模板分子的影响。结果证明了在质子溶剂中制备和应用非共价分子烙印聚合物是可行的。     

环丙沙星分子印迹聚合物的合成及识别性能研究

采用分子印迹技术合成了以环丙沙星为印迹分子,以甲基丙烯酸和4-乙烯基吡啶同时为功能单体的分子印迹聚合物。运用平衡结合实验研究了印迹聚合物的吸附特性和选择识别能力。Scatchard分析表明,在所研究的浓度范围内,分子印迹聚合物中形成了两类不同的结合位点。底物选择实验表明,这种聚合物对环丙沙星呈现高的选择结合能力。     

吡哌酸分子印迹聚合物的分子识别

采用分子印迹技术合成了吡哌酸分子印迹聚合物。运用平衡结合实验研究了聚合物的吸附特性和选择性识别能力。Scatchard分析表明,在本文所研究的浓度范围内,聚合物中形成了两类不同的结合位点。吡哌酸分子印迹聚合物对吡哌酸呈现较高的选择识别特性,可作为固相萃取剂,在人血清吡哌酸的分析中对样品进行了有效的提取和净化。     

Preparation of a novel molecularly imprinted polymer using a water-soluble crosslinking agent

A molecularly imprinted polymer was prepared using a water-soluble crosslinking agent. An ionic complex was utilized as the assembly for the template molecule and the functional monomer, and water as porogenic solvent during preparation of the imprinted polymer. The results of chromatographic evaluations for the prepared polymer suggested that the polymer had much lower hydrophobicity compared with usual octadecyl group bonded silica or the usual molecular imprinted polymer prepared from ethyleneglycol dimethacrylate, and the selective recognition ability for template molecule in the completely aqueous condition.