咪唑氟硼酸类离子液体熔点与分子内相互作用能的关系

运用密度泛函理论B3LYP方法及6-311++G(d,p)基组对11种咪唑氟硼酸离子液体进行了研究.选择相应化合物的离子体系{[XIM][BF4]n}(n-1)-(n=2,3)作为研究对象,即研究体系由一个烷基咪唑阳离子XIM+和2-3个BF4-阴离子构成,对其进行结构优化.在优化得到的最低能量构型的基础上计算了分子内阳离子与阴离子间的相互作用能,同时考虑了基组重叠误差的修正.结果表明所研究离子体系的离子间相互作用能与离子液体的实验熔点之间存在明确的线性关系,并且所得到的线性方程与氨基酸阳离子型离子液体中存在的线性关系相近.我们的工作为今后借助量子化学方法设计功能化离子液体提供了一定的理论基础.     

缬氨酸阳离子型离子液体的实验与理论研究

以缬氨酸（Val）和氟硼酸、对甲苯磺酸、硝酸、盐酸、硫酸和磷酸为原料,通过混合适当摩尔比的缬氨酸和相应的强酸于水中,采用一步法在微波反应仪中合成缬氨酸阳离子型离子液体,得到了缬氨酸氟硼酸盐（ValBF4）、缬氨酸盐酸盐（ValCl）、缬氨酸硝酸盐（ValNO3）、缬氨酸对甲苯磺酸盐（ValTsO）、缬氨酸硫酸盐（Val2SO4）、缬氨酸磷酸盐（Val3PO4）共6种产物,并对其理化性质进行了表征,其中ValBF4、Val3PO4具有较低的熔点（低于100 ℃) ,但热稳定性较传统的离子液体差。此外研究了缬氨酸阳离子型离子液体在汽油脱硫中的应用,以正庚烷作溶剂、噻吩作含硫杂质组成模拟汽油体系,将缬氨酸硝酸盐作为脱硫剂加入模拟油中,在进行超声波振荡之后利用色谱仪检测不同振荡时间的脱硫效果。同时采用量子化学方法对合成的6种化合物的单个分子进行了理论研究,在B3LYP/6-11++G**水平下获得了最稳能量构型,并在此基础上进行了红外光谱、离子间相互作用、自然键轨道分析等,从理论上对上述实验结果进行验证及补充。     

一类新型酯类离子液体的合成

以氯乙酸乙酯和氮杂环化合物(1-甲基咪唑、吡啶、N-乙基哌啶、N-甲基吗啉)为原料, 采用两步法合成了一类新型的酯类离子液体, 对合成的12个化合物进行了元素分析, ¹H NMR谱和一些物理性质的测定. 大多数化合物的熔点低于100 ℃, 为室温离子液体. 所合成离子液体的热稳定范围都比较宽, 性质稳定.     

分子动力学模拟研究[Bmim][PF_6]+水+醇三元体系的微观结构和分子间相互作用(英文)

研究离子液体体系的微观结构和分子间相互作用具有重要意义.本文对1-丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF6])+水+乙醇和[Bmim][PF6]+水+异丙醇三元体系进行了分子模拟研究,计算了径向分布函数和不同组成的水-醇混合溶剂与离子液体阴阳离子间的相互作用能,并将其分解为库仑相互作用能和Lennard-Jones(LJ)势能.在此基础上,研究了溶液体系的微观结构、分子间相互作用和相行为.结果表明,水倾向于与离子液体阴离子和阳离子极性部分作用,醇倾向于与阴离子和阳离子非极性部分作用;库仑力主导阴离子-溶剂相互作用,色散力主导阳离子-溶剂相互作用,阴阳离子的缔合状态对色散力影响较小,对库仑力的影响非常显著.     

开放骨架亚磷酸锰（NH4）2Mn3（HPO3）4和Mn（HPO3）的离子热合成与表征

采用离子热法,在保持其它合成因素相同的条件下,仅改变离子液体种类,合成了2例不同结构的开放骨架亚磷酸锰化合物(NH4)2Mn3(HPO3)4(1)和Mn(HPO3)(2),并对其单晶结构进行了解析.化合物1是由MnO6八面体和亚磷酸根构筑成的二维层状结构化合物,其中铵根离子填充在层间平衡骨架电荷;化合物2是由MnO6八面体和亚磷酸根通过共享顶点氧原子连接构筑而成的致密的三维开放骨架.通过扫描电子显微镜(SEM)、X射线单晶结构解析、X射线粉末衍射(XRD)和元素分析(ICP-AES及CHN)对化合物进行了详细表征.化合物1的磁学性质研究结果表明其结构中的的Mn2+间存在较强的反铁磁相互作用.     

二氢新茉莉酮酸甲酯和二氢茉莉铜酸甲酯的合成

本文报道了二氢茉莉酮酸甲酯(1)和二氢新茉莉酮酸甲酯(2)的新合成路线,以丙二酸二乙酯为原料,依次与溴代戊烷和烯丙基溴进行烷基化反应,得到α-戊基-α-烯丙基-丙二酸二乙酯(5),5经过水解、脱羧得到γ-烯酸3.酰氯化合物6进行Friendel-Crafts反应得到2-戊基-环戊-4-烯-1-酮(7),7通过Michael加成、水解、脱羧和酯化,得到2,总产率为24.4%.7可以异构化为2-戊基-环戊-2-烯-1-酮(9),9用通常的方法合成了1.1和2可以明显地从核磁共振谱、红外光谱和气相色谱识别。     

分子动力学模拟研究[Bmim][PF6]+水+醇三元体系的微观结构和分子间相互作用

研究离子液体体系的微观结构和分子间相互作用具有重要意义. 本文对1-丁基-3-甲基咪唑六氟磷酸盐([Bmim][PF₆])+水+乙醇和[Bmim][PF₆]+水+异丙醇三元体系进行了分子模拟研究, 计算了径向分布函数和不同组成的水-醇混合溶剂与离子液体阴阳离子间的相互作用能, 并将其分解为库仑相互作用能和Lennard-Jones(LJ)势能. 在此基础上, 研究了溶液体系的微观结构、分子间相互作用和相行为. 结果表明, 水倾向于与离子液体阴离子和阳离子极性部分作用, 醇倾向于与阴离子和阳离子非极性部分作用; 库仑力主导阴离子-溶剂相互作用, 色散力主导阳离子-溶剂相互作用, 阴阳离子的缔合状态对色散力影响较小, 对库仑力的影响非常显著.     

羟基聚醚官能化杂多酸聚离子液体催化的连续酯化氧化合成环氧油酸甲酯

以乙二醇、环氧氯丙烷、三甲胺、三乙胺、三乙醇胺、H₄SiW₁₂O₄₀、H₃PW₁₂O₄₀为起始原料,经开环聚合、季铵化、分子自组装,构建了系列羟基官能化聚醚杂多酸聚离子液体HPIL-1～HPIL-6。聚离子液体兼具两亲活性、酸催化活性和氧化催化活性,以其为非均相催化剂,实现了油酸连续酯化、环氧化合成环氧油酸甲酯。当原料比n(甲醇)∶n(H₂O₂)∶n(油酸)∶n(聚离子液体)=500∶120∶40∶1,室温下酯化反应2.5h, 65℃下环氧化反应4h,环氧油酸甲酯产率92%。聚离子液体经离心分离、溶剂洗涤、真空干燥即可再生循环使用,循环使用5次,催化活性基本保持不变。     

新型苯并噻唑离子液体的合成及其催化蓖麻油酸酯化研究

以价格低廉的苯并噻唑为原料,合成了4种新型功能化布朗斯特酸性离子液体:苯并噻唑硫酸氢盐([HBth]-HSO_4)、苯并噻唑磷酸二氢盐([HBth]H_2PO_4)、苯并噻唑高氯酸盐([HBth]ClO_4)、苯并噻唑硝酸盐([HBth]NO_3),其结构经FT-IR、HRMS、NMR表征得到确认.考察了4种酸性离子液体在蓖麻油酸和乙二醇丁醚(EGBE)酯化反应中的催化活性,并与以浓硫酸为催化剂的催化体系相对照.结果表明:当n(蓖麻油酸)∶n(乙二醇丁醚)=1∶1.15,离子液体催化剂用量为蓖麻油酸重量的2%,反应温度90℃,反应时间5 h,酯化率可达98.8%,离子液体催化剂经真空干燥重复使用10次后,仍具有较高的催化活性.还考察了以苯并噻唑硫酸氢盐为催化剂催化合成系列蓖麻油酸二元醇醚酯和短链脂肪酸酯,也获得了较高的酯化率,且离子液体均能与酯产物自动分相.与传统硫酸催化酯化相比,此类离子液体催化酯化具有生产成本低、过程清洁、使用周期长等优点,完全可以替代传统浓硫酸催化蓖麻油酸酯化反应.     

新型二茂铁甲基季铵盐离子液体的合成与表征

以二茂铁与二甲胺为原料合成了碘化二茂铁甲基季铵盐,再经复分解反应得到乙酸二茂铁甲基季铵盐离子液体;表征了离子液体的结构,测定了其熔点和溶解性.结果表明,合成的乙酸二茂铁甲基季铵盐离子化合物熔点低于100℃,是一种新型的二茂铁甲基季铵盐离子液体.     

Glutamic acid cation based ionic liquids: microwave synthesis, characterization, and theoretical study

Some new members of amino acid ionic liquids (ILs) with glutamic acid (Glu) cation were studied. GluBF4, GluCl, GluNO3, and Glu2SO4 were synthesized using the one-step microwave synthesis method, and their physicochemical properties, including the IR spectrum, melting point, conductivity, solubility, and thermostability, were investigated in detail experimentally. Systematic theoretical study on the series molecules were also performed by quantum chemistry calculation. Geometry optimization on the single molecule was carried out with the B3LYP/6-311++G** level of theory, and the vibration frequencies of each optimized molecule were analyzed at the same level. The binding energies were calculated, and the basis set superposition error (BSSE) was corrected by the counterpoise method (CP). A close relation between the experimental melting points and the intramolecular interaction was found: the smaller the absolute value of the biding energy between ions is, the lower the melting point would be. This conclusion shows the probability of designing ILs with the help of theoretical way in the future exploitation.     

野西瓜种子油中脂肪酸的气相色谱-质谱分析

采用加速溶剂萃取及索氏提取法,用正己烷和乙醚为提取剂从野西瓜种子中提取油脂,经浓H2SO4催化,甲醇甲酯化处理后,以气相色谱-质谱联用技术鉴定出野西瓜种子中的脂肪酸主要组成为:油酸、亚油酸、硬脂酸等,其中不饱和脂肪酸总量占91.4%,主要成分油酸占73.3%。野西瓜种子油具有较高的营养价值,同时也可为生物柴油提供良好的原料。     

四氯化锡催化合成肉桂酸酯

利用五水四氯化锡为催化剂,使肉桂酸与醇类发生酯化反应,合成了肉桂酸甲酯、肉桂酸乙酯、肉桂酸正丙酯、肉桂酸正丁酯、肉桂酸异丁酯、肉桂酸正戊酯和肉桂酸异戊酯,测定了各种酯的沸点(或熔点)、折射率、元素组成和红外光谱。     

Alkylimidazolium Protic Ionic Liquids: Structural Features and Physicochemical Properties

We focus on a series of protic ionic liquids (PILs) with imidazolium and alkylimidazolium (1R3HIm, R=methyl, ethyl, propyl, and butyl) cations. Using the literature data and our experimental results on the thermal and transport properties, we analyze the effects of the anion nature and the alkyl radical length in the cation structure on the above properties. DFT calculations in gas and solvent phase provide further microscopic insights into the structure and cation-anion binding in these PILs. We show that the higher thermodynamic stability of an ion pair raises the PIL decomposition temperature. The melting points of the salts with the same cation decrease as the hydrocarbon radical in the cation becomes longer, which correlates with the weaker ion-ion interaction inthe ion pairs. A comparative analysis of the protic ILs and corresponding ILs (1R3MeIm) with the same radical (R) in the cation structure and the same anion has been performed. The lower melting points of the ILs with 1R3MeIm cations are assumed to result from the weakening of both the ion-ion interaction and the hydrogen bond.     

硫酸铁铵催化合成肉桂酸酯

利用十二水合硫酸铁铵为催化剂,使肉桂酸与醇类发生酯化反应合成了肉桂酸甲酯、肉桂酸乙酯、肉桂酸正丙酯、肉桂酸正丁酯、肉桂酸异丁酯、肉桂酸正戊酯和肉桂酸异戊酯,测定了各种酯的沸点（或熔点）折光率、元素组成和IR。     

Gas-phase reactivity of the O=P(OCH3)2 + phosphonium ion towards alpha,beta-unsaturated esters in a quadrupole ion trap

Ion-molecule reactions between the O=P(OCH3)2 + phosphonium ions and eight alpha,beta-unsaturated esters (methyl acrylate, ethyl acrylate, methyl crotonate, ethyl crotonate, methyl 3,3-dimethylacrylate, ethyl 3,3-dimethylacrylate, methyl methacrylate and ethyl methacrylate) were performed in a quadrupole ion trap mass spectrometer. The O=P(OCH3)2 + phosphonium ions, formed by electron ionization from neutral trimethyl phosphite, were found to react with alpha,beta-unsaturated esters to give an adduct [RR'C=CR'COOR', O=P(OCH3)2]+, which lose spontaneously a molecule of trimethyl phosphate (R'=CH3) or dimethyl ethyl phosphate (R'=C2H5). An ion corresponding to a protonated trialkyl phosphate is also observed when substituent R'=H. To confirm the experimental results, and to elucidate the mechanism for the formation of the ionic species, a theoretical study using the density functional theory (DFT) approach was carried out. The potential energy surface obtained from B3LYP/6-31G(d,p) calculations for the reaction between O=P(OCH3)2 + and methyl acrylate is described.     

The effect of C2 substitution on melting point and liquid phase dynamics of imidazolium based-ionic liquids: insights from molecular dynamics simulations

Using molecular dynamics simulations, the melting points and liquid phase dynamic properties were studied for four alkyl-imidazolium-based ionic liquids, 1-n-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]), 1-n-butyl-2,3-dimethylimidazolium hexafluorophosphate ([BMMIM][PF6]), 1-ethyl-3-methylimidazolium hexafluorophosphate ([EMIM][PF6]), and 1-ethyl-2,3-dimethylimidazolium hexafluorophosphate ([EMMIM][PF6]), respectively. Experimentally it has been observed that the substitution of a methyl group for a hydrogen at the C2 position of the cation ring leads to an increase in both the melting point and liquid phase viscosity, contrary to arguments that had been made regarding associations between the ions. The melting points of the four ionic liquids were accurately predicted using simulations, as were the trends in viscosity. The simulation results show that the origin of the effect is mainly entropic, although enthalpy also plays an important role.     

细胞粘附位点RGD前体二肽的化学合成与酯化

摘要利用一种新颖的化学法合成了细胞粘附位点RGD前体二肽GD(Gly-Asp). 并利用ROH-HCl法进一步完成了GD二肽乙酯化和甲酯化. 考察了GD二肽对乙醇/甲醇的摩尔比,  反应温度和反应时间对酯化收率的影响, 使GD二肽酯化的条件得到了优化, GD二肽对乙醇/甲醇的摩尔比为1∶40,  反应温度30℃,  反应时间1~2.5 h,   最大收率为80%~85%. 利用质谱分析法确证了两种GD二肽酯为Gly-Asp-(OEt)2 和Gly-Asp-(OMe)2.     

Structure and conformation properties of 1-alkyl-3-methylimidazolium halide ionic liquids: a density-functional theory study

The structures and conformational properties of 1-alkyl-3-methylimidazolium halide ionic liquids have been studied with a Becke's 3 Parameter functional method. The interaction mechanisms between the cation and the anion in 1-ethyl-3-methylimidazolium (Emim+) halide and 1-butyl-3-methylimidazolium (Bmim+) halide ionic liquids were investigated using 6-31G*, 6-31++G**, and 6-311++G** basis sets. Forty structures of different ion pairs were optimized and geometrical parameters of them have been discussed in details. Halide ions (Cl- or Br-) have been gradually placed in different regions around imidazolium cation and the interaction energies between the anion and the cation have been calculated. Theoretical results indicate that there are four activity regions in the vicinity of the imidazolium cations, in these regions the imidazolium cations and the halide anions formed stable ion pairs. Imidazolium cations can form hydrogen bond interactions with one, two or three but no more than three nearest halide anions. The halide ions are situated in hydrogen bond positions rather than at random.