CdTe/CdS量子点荧光探针测定痕量锑

以巯基乙酸为稳定剂,在水溶液中合成了CdTe/CdS量子点(QDs),并基于QDs与锑混合后发生荧光猝灭作用,建立了以CdTe/CdS QDs作为荧光探针检测微量锑的新方法。研究表明,在pH值为4.80的柠檬酸-柠檬酸钠中,反应时间为10min时,锑浓度在0.03~2.50μg/mL范围与CdTe/CdS QDs的荧光猝灭程度呈良好的线性关系,相关系数为0.9969,检出限为2.60×10-3μg/mL。     

CdTe/CdS量子点荧光探针测定司帕沙星含量

在水溶液中合成了巯基乙酸修饰的CdTe/CdS量子点(QDs), 基于喹诺酮类抗生素司帕沙星与CdTe/CdS量子点的荧光猝灭作用, 建立了用CdTe/CdS量子点作为荧光探针检测微量司帕沙星的新方法. 用荧光光谱、紫外光谱研究了CdTe/CdS QDs与司帕沙星的相互作用. 研究表明: 该荧光猝灭的机理属于静态猝灭, 反应的作用机理可能是司帕沙星促使QDs表面键合的有机分子发生变化, 在Cd的电子空穴上形成了碲氧复合物, 致使荧光猝灭. 实验发现, pH为6.50的磷酸缓冲溶液中, 量子点的浓度为3.75×10^－4 mol/L时, 司帕沙星的浓度在0.1～50 μg/mL范围与CdTe/CdS量子点荧光猝灭强度呈良好的线性关系, 相关系数0.9992, 检出限0.01399 μg/mL. 该方法简便、快捷、灵敏、线性范围宽, 应用于司帕沙星片剂司帕沙星含量的测定, 分析结果与标示量一致; 用于牛奶中司帕沙星残留量的检测, 回收率在93.1%～102.4%, 结果满意.     

CdS/ZnS-CdTe量子点间荧光共振能量转移测定痕量汞

研究了CdS/ZnS核壳型量子点为能量给体,CdTe量子点为能量受体的荧光共振能量转移机理,及其在超痕量汞测定中的应用。实验表明在十二烷基苯磺酸钠存在下,于pH 7.8的硼酸-硼酸钠缓冲液,CdS/ZnS与CdTe量子点之间能发生有效的能量转移。探讨了CdS/ZnS与CdTe量子点间能量转移机理。实验结果表明:Hg2+的加入能使CdS/ZnS-CdTe体系发生荧光猝灭,且Hg2+的浓度与体系荧光猝灭强度在一定范围内有良好的线性,据此建立了CdS/ZnSCdTe-Hg2+体系测定超痕量Hg2+的方法。在优化条件下,Hg2+的线性范围为2.0×10-10~2.0×10-8g/L,检出限为6.67×10-11g/L(n=11)。方法应用于水样中Hg2+的测定,其RSD≤4.1%(n=6),回收率为97.2%~99.8%。     

CdTe量子点与蛋白质相互作用的荧光猝灭效应

本文在水热法合成水溶性CdTe及核壳结构CdTe/CdS量子点的基础上,分别研究了细胞色素c对CdTe量子点及CdTe/CdS核壳量子点荧光的猝灭效应和CdTe量子点对牛血清白蛋白荧光的猝灭效应,并阐述了猝灭机理。结果显示,细胞色素c对CdTe量子点的荧光猝灭效应具有一定的粒径依赖性,粒径越小,猝灭效应越强;细胞色素c对CdTe/CdS核壳量子点的猝灭效应比对CdTe量子点的更强,揭示了受激电子的表面传递机理。CdTe量子点通过松散牛血清白蛋白的螺旋结构而猝灭其荧光。     

CdTe/CdS量子点荧光探针测定环境废水中的痕量银(Ⅰ)

制备了巯基乙酸(TGA)修饰的CdTe/CdS量子点(QDs),并基于pH值为5.80的柠檬酸-柠檬酸钠缓冲溶液和十二烷基苯磺酸钠(SDBS)存在下,Ag(Ⅰ)与CdTe/CdS QDs的荧光猝灭作用,建立了以CdTe/CdS QDs为荧光探针测定样品中痕量Ag(Ⅰ)含量的新方法。室温下,Ag(Ⅰ)的质量浓度在3.0~700μg/L范围内与CdTe/CdS QDs荧光猝灭强度呈线性关系,相关系数为0.9988,方法的检出限为1.0μg/L。方法应用于环境废水中痕量Ag(Ⅰ)含量检测,并做回收试验,测得回收率为95.2%~103.0%。     

CdTe/CdS半导体量子点作为农药百草枯的高灵敏传感器

用硫普罗宁(Tiopronin, TP)作为稳定剂合成了水溶性的高荧光CdTe/CdS量子点. 研究了该量子点与10种农药的相互作用. 实验发现, 当农药浓度为4.76×10^-6 mol/L时, 农药百草枯(Paraquat)能显著猝灭CdTe/CdS量子点的荧光, 使其荧光强度下降87.3%, 而分别加入乙酰甲胺磷及辛硫磷等其它9种农药, 仅能使CdTe/CdS量子点的荧光强度下降0.1%～5.1%, 显示了该CdTe/CdS量子点对百草枯的特异性传感作用. 采用吸收光谱和时间分辨荧光动力学研究了百草枯对CdTe/CdS量子点的荧光猝灭机理. 计算得出荧光强度猝灭的Stern-Volmer常数K为2.03×10⁶, 而寿命猝灭的Stern-Volmer常数K为4.25×10⁵. 结果表明, 百草枯对CdTe/CdS量子点的荧光猝灭主要为静态过程, 而动态过程的贡献较小. 利用二者的猝灭作用建立了对农药百草枯的高灵敏检测新方法, 校正曲线的线性范围为9.90×10^-9～1.50×10^-6 mol/L, 检出限为6.35×10^-9 mol/L, R=0.999. 用该方法对3种食品和3种水样中残留农药进行了检测, 加标回收率均在82.2%～98.5%之间, 其相对标准偏差为2.62%~8.35%.     

光谱法研究核壳量子点CdTe/CdS与牛血清白蛋白的相互作用

应用荧光光谱、圆二色光谱和紫外吸收光谱等技术研究核壳量子点CdTe/CdS与牛血清白蛋白(BSA)相互作用的结果表明,CdTe/CdS对BSA的荧光猝灭机理为静态猝灭。根据不同温度下量子点对BSA的荧光猝灭作用计算了结合常数、热力学参数,证明了量子点与BSA相互作用力主要是范德华力或氢键作用力。探讨了量子点对BSA构象的影响。     

微波辐射法制备水溶性CdTe/ZnS量子点及其与司帕沙星的作用

以巯基乙酸为稳定剂,通过微波加热在水溶液中制备了CdTe/znS量子点.研究了pH值、反应时间、反应温度和cdTe/s<'2->浓度比等合成条件对cdTe量子点荧光光谱的影响.以CdTe/ZnS量子点为探针,探讨了喹诺酮类抗生素司帕沙星与量子点的荧光猝灭作用,结果表明,在最佳实验条件下,其线性范围为0.05～3.00μg/mL,线性相关系数为0.9954,检出限为0.01μg/mL,可将CdTe/ZnS量子点荧光探针用于司帕沙星的测定.     

CdTe/CdS-罗丹明荧光共振能量转移猝灭法测定铅(Ⅱ)及相互作用机制的研究

以巯基乙酸为修饰剂,水相合成量子产率高达75％的CdTe/CdS核壳型量子点,建立了以CdTe/CdS QDs作为能量供体,罗丹明B作为能量受体组成的荧光共振能量转移体系.在此基础上,以CdTe/CdS-罗丹明B为荧光探针,荧光共振能量转移猝灭为理论基础,设计出一种检测pb2+含量的方法.在0～9.62×10-11mo...     

CdTe量子点荧光探针测定氯霉素含量的研究

在水溶液体系中制备出了具有高质量荧光性能,巯基乙酸(TGA)修饰的CdTe量子点(QDs),基于量子点与氯霉素混合后发生荧光猝灭作用,建立CdTe量子点作为荧光探针测定氯霉素的新方法。在Tris-HCl缓冲液(pH 7.00,0.10 mol·L-1)中,反应时间为10min时,氯霉素浓度在10～70μg·mL-1范围内与CdTe量子点的荧光猝灭程度呈良好的线性关系,相关系数为0.9981,检出限为0.799μg.mL-1。方法简便快速,灵敏度高,可用于实际样品中氯霉素的检测。     

CdTe/CdS量子点与丝裂霉素的相互作用及其应用

在水相中合成了硫普罗宁(Tiopronin,TP)修饰的CdTe/CdS量子点(TP-CdTe/CdS QDs).利用紫外-可见吸收光谱、荧光光谱研究了TP-CdTe/CdS QDs与丝裂霉素(mitomycin C,MMC)的相互作用机理.在pH=7.6的tris-HCl缓冲溶液介质中,TP-CdTe/CdS QDs与MMC相互作用,使TP-CdTe/CdS QDs的荧光发生猝灭,并且QDs的荧光强度与MMC的浓度有良好的线性关系(r=0.9991),线性范围4.7×10-9～1.2×10-8g/mL,检出限(3σ)为1.4×10-g/mL.此方法快速简便,用于尿样中丝裂霉素的测定,实验结果令人满意.     

紫外-可见吸收光谱和荧光光谱研究壳核型 CdTe/CdS量子点与盐酸巴马汀的相互作用及其分析应用

合成了巯基乙酸(TGA)修饰的壳核型CdTe/CdS量子点(TGA-CdTe/CdS QDs), 利用紫外-可见光谱和荧光光谱研究了TGA-CdTe/CdS QDs与盐酸巴马汀(PC)的相互作用机理. 结果表明, 在pH=7.4的Tris-HCl缓冲液中, QDs与PC相互作用后使QDs的荧光呈线性猝灭, 并有良好的线性关系(r=0.997), 线性范围为25~1×10⁴ ng/mL, 检出限(3σ)为7.7 ng/mL. 建立了一种快速简便、 可定量测定PC的新方法.     

Ultrafast synthesis of near-infrared-emitting aqueous CdTe/CdS quantum dots with high fluorescence

The traditional aqueous route to synthesis CdTe/CdS Core/shell (c/s) quantum dots (QDs) via decomposition of Cd-thiol complexes is usually time consuming. Herein, an ultrafast and facile aqueous synthetic approach under atmospheric pressure for CdTe/CdS c/s QDs with emission from the green to the near-infrared window (535–820 nm) is reported. With purified CdTe core QDs diluted in solution of Cd-3-mercaptopropionic acid (MPA) complexes, CdTe/CdS c/s QDs with emission wavelengths at 700 and 800 nm can be obtained within 20- and 45-min refluxing under the optimized experimental conditions, respectively. This is the most rapid way to prepare CdTe/CdS c/s QDs in aqueous phase, and the obtained QDs were highly luminescent without postsynthesis treatment. The influences of various experimental factors, including Cd²⁺ concentration, MPA-to-Cd ratio, pH value, and dilution ratio on the growth rate and luminescent properties of the obtained CdTe/CdS c/s QDs, have been taken into consideration. The three processes “purification-dilution-addition” ensure the synthesis environment with high pH value and low core concentration and have a marked impact on the rapid synthesis rate and the resulting high fluorescence of CdTe/CdS c/s QDs.     

紫外-可见吸收、荧光光谱研究CdTe/CdS量子点与盐酸药根碱的相互作用及其应用

合成了巯基乙酸（TGA）修饰的壳核型CdTe/CdS量子点（TGA-CdTe/CdS QDs）。 利用紫外-可见光谱吸收、荧光光谱研究TGA-CdTe/CdS QDs与盐酸药根碱（JH）的相互作用机理。 在pH值为7.4的tris-HCl缓冲溶液介质中,QDs与JH相互作用后使QDs的荧光呈线性猝灭,并有良好的线性关系（r=0.999 1）,线性范围0.011~10 mg/L,检出限（3σ）为3.3×10-3 mg/L,因此可以作为一种快速、简便、定量测定盐酸药根碱的新方法。     

Electochemiluminescence of CdTe/CdS Quantum Dots with Triproprylamine as Coreactant in Aqueous Solution at a Lower Potential and Its Application for Highly Sensitive and Selective Detection of Cu2+

Anodic electrochemiluminescence (ECL) of 3‐mercaptopropionic acid (MPA)‐ capped CdTe/CdS core‐shell quantum dots (QDs) with tripropylamine (TPrA) as the co‐reactant were studied in aqueous (Tris buffer) solution for the first time. The results suggest that the oxidation of TPrA at a glassy carbon electrode (GCE) surface participated in the ECL of QDs, and the onset potential and the intensity of ECL of CdTe/CdS QDs were affected seriously by TPrA, as the co‐reactant, in Tris buffer solution. The onset potential of ECL in this new system was about +0.5 V (vs. Ag/AgCl) and the ECL intensity greatly enhanced when TPrA was present. Various influencing factors, such as the electrolyte, pH, QDs concentration, potential range and scan rates on the ECL were studied. Based on the selective quenching by Cu²⁺ to the light emission from CdTe/CdS QDs/TPrA system, a highly sensitive and selective method for the determination of Cu²⁺ was developed. At the optimal conditions, the relative ECL intensity, I₀/I, was proportional to the concentration of Cu²⁺ from 14 nM to 0.21 μM with the detection limit of 6.1 nM based on the signal‐to‐noise ratio of 3. The possible ECL mechanism of QDs and the quenching mechanism of ECL were proposed.     

Aqueous synthesis of type-II core/shell CdTe/CdSe quantum dots for near-infrared fluorescent sensing of copper(II)

Type-II core/shell CdTe/CdSe quantum dots (QDs) were synthesized in aqueous medium by employing thiol-capped CdTe QDs as core template and CdCl(2) and Na(2)SeSO(3) as shell precursors, respectively. Compared with the original CdTe cores, the core/shell CdTe/CdSe QDs showed an obvious red-shifted emission with the color-tune capability to the near-infrared (NIR) wavelength, because of the formation of an indirect excitation. The prepared QDs exhibited high stability and moderate fluorescence quantum yields (10-20%), and their core/shell heterostructure was characterized by UV-vis absorption, steady-state and time-resolved fluorescence spectra, X-ray powder diffraction, X-ray photoelectron spectroscopy and high-resolution transmission electron microscopy. The fluorescence of the core/shell QDs could be markedly quenched by Cu(II), and approximate concentrations of other physiologically important cations, such as Zn(II), Ca(II), Na(I) and K(I) etc., had no effect on the fluorescence. Based on this, a simple and rapid method for Cu(II) determination was proposed using the NIR CdTe/CdSe QDs as fluorescent probes. Under optimal conditions, the response was linearly proportional to the concentration of Cu(II) between 0.05 to 50.0 x 10(-6) mol L(-1), the limit of detection was 2.0 x 10(-8) mol L(-1). The developed method was successfully applied to the detection of trace Cu(II) in real samples.     

基于GSH-CdTe/CdS量子点的荧光变化研究hsDNA与盐酸洛美沙星-Cu(Ⅱ)配合物的相互作用

采用水相法合成了谷胱甘肽(GSH)修饰的CdTe/CdS量子点(GSH-CdTe/CdS QDs). 透射电子显微镜表征结果表明, GSH-CdTe/CdS QDs的粒径分布均匀, 分散性好. 在Tris-HCl(pH=7.6)缓冲液中, 由于静电引力作用, 带正电的盐酸洛美沙星(LMFH)-Cu(Ⅱ)配合物[LMFH-Cu(Ⅱ)]吸附到带负电的GSH-CdTe/CdS QDs表面形成基态复合物, 导致GSH-CdTe/CdS QDs的荧光猝灭. 随后, 向GSH-CdTe/CdS QDs-LMFH-Cu(Ⅱ)配合物体系中加入鲱鱼精DNA(hsDNA), hsDNA可诱导LMFH-Cu(Ⅱ)配合物从GSH-CdTe/CdS QDs表面脱落而嵌入到hsDNA的双螺旋结构中, 使GSH-CdTe/CdS QDs的荧光恢复. 通过对GSH-CdTe/CdS QDs荧光的可逆调控, 利用荧光光谱、 紫外-可见吸收光谱和共振瑞利散射光谱研究了hsDNA与LMFH-Cu(Ⅱ)配合物的相互作用. 通过对比GSH-CdTe/CdS QDs与LMFH相互作用的光谱性质, 讨论了GSH-CdTe/CdS QDs-LMFH-Cu(Ⅱ)-hsDNA的相互作用机理, 模拟了作用过程, 从而建立了一种研究氟诺喹酮类药物的金属配合物与核酸相互作用机制的光谱方法.     

A sensitive sensor for anthraquinone anticancer drugs and hsDNA based on CdTe/CdS quantum dots fluorescence reversible control

Based on CdTe/CdS quantum dots (CdTe/CdS QDs) fluorescence (FL) reversible control, a new and sensitive FL sensor for determination of anthraquinone (AQ) anticancer drugs (adriamycin and daunorubicin) and herring sperm DNA (hsDNA) was developed. Under the experimental conditions, FL of CdTe/CdS QDs can be effectively quenched by AQ anticancer drugs due to the binding of AQ anticancer drugs on the surface of CdTe/CdS QDs and photoinduced electron transfer (PET) process from CdTe/CdS QDs to AQ anticancer drugs. Addition of hsDNA afterwards brought the restoration of CdTe/CdS QDs FL intensity, as AQ anticancer drugs peeled off from the surface of CdTe/CdS QDs and embedded into hsDNA double helix structure. The liner ranges and the detection limits of FL quenching methods for two AQ anticancer drugs were 0.33-9 μg mL⁻¹ and 0.09 μg mL⁻¹ for ADM and 0.15-9 μg mL⁻¹ and 0.04 μg mL⁻¹ for DNR, respectively. The restored FL intensity was proportional to concentration of hsDNA in the range of 1.38-28 μg mL⁻¹and the detection limit for hsDNA was 0.41 μg mL⁻¹. It was applied to the determination of AQ anticancer drugs in human serum and urine samples with satisfactory results. The reaction mechanism of CdTe/CdS QDs FL reversible control was studied.     

A one-step selective fluorescence turn-on detection of cysteine and homocysteine based on a facile CdTe/CdS quantum dots–phenanthroline system

In this paper, we report a simple, selective, sensitive and low-cost turn-on photoluminescent sensor for cysteine and homocysteine based on the fluorescence recovery of the CdTe/CdS quantum dots (QDs)–phenanthroline (Phen) system. In the presence of Phen, the fluorescence of QDs could be quenched effectively due to the formation of the non-fluorescent complexes between water-soluble thioglycolic acid (TGA)-capped QDs and Phen. Subsequently, upon addition of cysteine and homocysteine, the strong affinity of cysteine and homocysteine to QDs enables Phen to be dissociated from the surface of QDs and to form stable and luminescent complexes with cysteine and homocysteine in solution. Thus, the fluorescence of CdTe/CdS QDs was recovered gradually. A good linear relationship was obtained from 1.0 to 70.0 μM for cysteine and from 1.0 to 90.0 μM for homocysteine, respectively. The detection limits of cysteine and homocysteine were 0.78 and 0.67 μM, respectively. In addition, the method exhibited a high selectivity for cysteine and homocysteine over the other substances, such as amino acids, thiols, proteins, carbohydrates, etc. More importantly, the sensing system can not only achieve quantitative detection of cysteine and homocysteine but also could be applied in semiquantitative cysteine and homocysteine determination by digital visualization. Therefore, as a proof-of-concept, the proposed method has potential application for the selective detection of cysteine and homocysteine in biological fluids.