八极分子2,4,6-三[4-[4-[N-乙基-N-(2-羟乙基)]氨基苯偶氮基]苯乙烯基]均三嗪的合成

以乙睛和乙醇为原料经2步反应合成了2,4,6-三甲基均三嗪(1);以对硝基甲苯和N-乙基苯胺为原料经3步反应合成了4-[4-[N-乙基-N-(2-羟乙基)]氨基苯偶氮基]苯甲醛(4);1与4在氢氧化钾的作用下经羟醛缩合合成了偶氮型八极分子2,4,6-三[4-[4-[N-乙基-N-(2-羟乙基)]氨基苯偶氮基]苯乙烯基]...     

N-(2-氨基苯基)-2-喹唑啉酮乙酰胺盐酸盐的合成

本文通过2-溴-N-(2-硝基苯)乙酰胺和取代的喹唑啉酮在NaH催化下发生亲核取代反应,再经过氢化、酸化合成了4个新型常山碱类抗球虫药物-N-(2-氨基苯基)-2-喹唑啉酮乙酰胺盐酸盐(1∶1)。其中,2-溴-N-(2-硝基苯)乙酰胺通过溴乙酰氯与邻硝基苯胺反应制备,取代的喹唑啉酮使用取代的邻氨基苯甲酸与甲酰胺反应合成。所有目标化合物的结构均经1H NMR,IR和HRMS等方法确证。     

N-丁基-4-[乙基-(3-甲基苯基)氨基]丁酰胺的合成

以γ-丁内酯为起始原料,经开环氯化和酰化反应制得N-丁基-4-氯丁酰胺(2);2与N-乙基间甲苯胺经N-烷基化反应合成了N-丁基-4-[乙基-(3-甲基苯基)氨基]丁酰胺,总收率74.6%,纯度97.6%,其结构经1H NMR和MS(ESI)确证。     

新型N-甲基-N-(2-溴苯基)-2-取代基-2-氰基酰胺的合成

以2-溴苯胺和氰乙酸为原料,经N-烷基化、酰胺化和α-烷基化反应合成了4种新型的N-甲基-N-(2-溴苯基)-2-取代基-2-氰基酰胺类化合物(5a~5d),其结构经1H NMR,13C NMR和HR-MS表征。在最佳反应条件[N-甲基-N-(2-溴苯基)-2-氰基乙酰胺(3)1.7 mmol,n(3)∶n(溴乙烷)=1∶1,DMF为溶剂,Cs2CO3为碱,于室温反应6 h]下,5a收率83%。     

合成3-(2-吡啶氨基)丙酸乙酯的工艺改进

以2-氨基吡啶(2)和丙烯酸乙酯(3)为起始原料,经一步反应合成了凝血酶因子抑制剂达比加群酯的关键中间体3-(2-吡啶氨基)丙酸乙酯,其结构经1H NMR和ESI-MS确证.最佳反应条件为:2 120 mmol,n(2)∶n(3) =1.00∶1.08,于100℃回流反应24h,收率79.6％.     

2,5-二甲氧基-4-[(1E)-2-(1H-苯并咪唑-2-基)乙烯基]苯甲醛的合成

以2-甲基苯并咪唑(1)和2,5-二甲氧基-1,4-对苯二甲醛(3)为原料,经缩合反应合成了新化合物——2,5-二甲氧基-4-[(1E) -2-( 1H-苯并咪唑-2-基)乙烯基]苯甲醛(4),其结构经1H NMR,IR和ESI-MS表征.较佳缩合反应条件为:1 11 mol,n(1)∶n(3)=1.1∶1.0,回流反应6h,收率75.2％.     

3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮的合成

在对甲苯磷酸存在下,采用1,1-二[4-(N,N-二取代氨基)苯基]乙烯(3)和四氯苯酐在乙酸酐溶液中的缩合反应合成了3,3-二{2,2-二[4-(N,N-二取代氨基)苯基]乙烯基}-4,5,6,7-四氯-2-苯并[c]呋喃酮(4),产率89～93％。3由4,4＇-二(N,N-二取代氨基)二苯甲酮(1)与甲基碘化镁进行Grignard反应的产物经水解再脱水制得,产率85％～88.5％(以1为基准)。     

水溶性[5-邻(乙氧羰基甲氧基苯基)-10,15,20-Tri(4-N-甲基吡啶基)]卟啉铜(Ⅱ)配合物的合成、表征及其和单核苷酸的相互作用

合成并表征了 [5- o-(乙氧羰基甲氧基苯基 )-10,15,20-Tri(4-N-甲基吡啶基 )]卟啉 H_2[（ 5-o- (Emoph)-Tri(4-N- Mepy)]PP(1)及其铜配合物 Cu[（ 5- o- (Emoph)-Tri(4- N- Mepy)]PP(2),用紫外可见光谱滴定法测定了配合物 (2)与单核苷酸的配位平衡常数,研究了它作为主体分子和单核苷酸的相互作用。研究结果表明,各配体结合常数按 K(dGMP) >K(dAMP) >K(dTMP) >K(dCMP)≥ K(dUMP)的顺序依次减小。测定了π-π配合反应的Δ_rG,Δ_rH,Δ_rS,发现该反应是放热,熵减小的过程,该反应体系存在焓熵补偿关系。     

5-甲氧基-2-[(E)-(6-甲基吡啶-2-亚氨基)甲基]苯酚的合成与表征

研究了以2-羟基-4-甲氧基苯甲醛和2-氨基-6-甲基吡啶为原料合成新型席夫碱化合物5-甲氧基-2-[(E)-(6-甲基吡啶-2-亚氨基)甲基]苯酚的方法。当2-羟基-4-甲氧基苯甲醛与2-氨基-6-甲基吡啶摩尔比为1∶1.6,反应时间为6 h,反应温度为75℃时,反应产率最高。采用元素分析、UV-Vis、IR、1H NMR、X-射线单晶衍射等方法进行结构表征。该化合物为单斜晶系,空间群P21/c,a=1.1886(3)nm,b=0.65948(16)nm,c=1.6897(4)nm,β=108.505(3)°,V=1.2560(5)nm3,Dc=1.281 g·cm-3,Z=4,F(000)=512,μ=0.087 mm-1,R1=0.0477,wR2=0.1342。通过π···π堆积和分子内氢键O2-H2···N1、C8-H8A···N2形成较稳定的晶体结构,并具有蓝色荧光。     

4-硝基-4'-(N,N-二苯基氨基)-1,2-二苯乙烯的固相合成及其光学性质

采用固相研磨法,4-(N,N-二苯基氨基)苯甲醛和溴化(4-硝基苯甲基)三苯基膦经Wittig反应合成了一种光功能材料中间体——4-硝基-4'-(N,N-二苯基氨基)-1,2-二苯乙烯(1),收率45.5%,其结构经1H NMR,13C NMR,IR和MS确证。UV-Vis和FL研究结果表明:1在295 nm和400 nm~420 nm处有较强紫外吸收;溶剂极性对1的FL谱图有明显影响,随着溶剂极性增大,出现明显猝灭现象,并发生红移。     

1-( p -Fluorophenyl)-2-(2′-pyridyl)ethanol and 1-( p -fluorophenyl)-2-(2′-pyridyl)ethene obtained from the condensation reaction of 2-picoline and p -fluorophenylaldehyde under catalyst-and solvent-free conditions

The novel intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol or 2-[2′-(1-hydroxy-1-(p-fluorophenyl)ethyl]pyridine and the corresponding novel dehydration compound 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene or 2-[p-fluorophenylvinyl]pyridine were obtained from the condensation reaction of p-fluorophenylaldehyde and 2-picoline under catalyst-and solvent-free conditions. The intermediate 1-(p-fluorophenyl)-2-(2′-pyridyl)ethanol was obtained at 42 h reaction time and temperature of 120°C, respectively. ¹H-NMR, IR spectroscopic data of the 1-(p-fluorophenyl)-2-(2-pyridyl)ethanol clearly showed the presence of the-CH₂-CHOH-group. The compound was obtained as a white powder with m.p. 121–122°C and a yield of 8%. For 1-(p-fluorophenyl)-2-(2-pyridyl)ethene, the reaction conditions were similar, but the reaction temperature was increased to yield the double bond in the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene. At the reaction temperature of 140°C, the compound was a slightly brown powder with a m.p. of 78°C and yield of 18%. ¹H-NMR, IR spectroscopic data for the 1-(p-fluorophenyl)-2-(2′-pyridyl)ethene showed the presence of a double bond in trans configuration (-CH=CH-), characteristic of a styrylpyridine.     

3,6,6-trimethyl-4-oxo-1-(2-pyridyl)-4,5,6,7-tetrahydroindazole in Schmidt reaction and Beckmann rearrangement conditions for the 4-hydroxyimino derivative

Treatment of 3,6,6-trimethyl-4-oxo-1-(2-pyridyl)-4,5,6,7-tetrahydroindazole with sodium azide in acids gives 3,7,7-trimethyl-5-oxo-1-(2-pyridyl)-5,6,7,8-tetrahydro(4H)pyrazolo[4,3-b]azepine. Heating 1-(2-pyridyl)-3,6,6-trimethyl- and 1-phenyl-6,6-dimethyl-4-hydroxyimino-4,5,6,7-tetrahydroindazoles in polyphosphoric acid gives 1-phenyl-5,6-dimethyl- and 1-(2-pyridyl)-3,5,6-trimethyl-4-aminoindazole respectively: The reactions of the latter with 4-dimethylaminobenzaldehyde gave the 4-(4-dimethylaminobenzalamino) derivative and with 2-formyldimedone the 4-(4,4-dimethyl-2,6-dioxocyclohexylidenemethylamino) derivative.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 6, pp. 830–834, June, 2000.     

Synthesis and Characterization of 2,5-Bis(2-pyridyl)thiophene

2-[2-(Trimethylsilyl)ethynyl] pyridine ( 6 ) was prepared in 95% yield by reaction of 2-bromopyridine with trimethylsilylacetylene in triethylamine in the presence of bis(triphenylphosphine)Palladium(II) chloride and Copper(I) iodide. Desilylation of ( 6 ) by refluxing with sodium hydroxide in methanol (yield 95%) of 2-ethynylpyridine ( 5 ). Oxidative coupling of ( 5 ) in pyridine by oxygen in the presence of Copper(I) chloride gives 70% yield of 1,4-bis(2-pyridyl)1,3-butadiyne ( 4 ). Reaction of 4 with sodium sulfide affords 100% of 2,5-bis(2-pyridyl) thiophene ( 1 ).     

Polystyrene bis[N-(2-pyridyl) sulfonamide] palladium(II): Synthesis,characterization as a catalyst for coupling reactions

The [N-(2-pyridyl)] para-styrene sulfonamide (PSS) was prepared as a monomer, from the reaction of para-styrene sulfonyl chloride and 2-amino pyridine in the presence of potassium hydroxide solution 0.5 M as a base, and CH₃Cl. Polystyrene [N-(2-pyridyl) sulfonamide] (PPSS) was synthesized from the polymerization of [N-(2-pyridyl)] para-styrene sulfonamide (PSS). The Polystyrene bis [N-(2-pyridyl) sulfonamide] palladium (II) as a polymer- supporting palladium complex was also prepared from the reaction of PdCl₂ (CH₃CN)₂ with PPSS in the presence of KOH 0.5 M. Polystyrene bis [N-(2-pyridyl) sulfonamide] palladium (II) is produced as a novel heterogeneous catalyst for coupling reactions for C-C bond formation. This method includes higher yield and has an easier work-up procedure. The structures of the monomer, polymer and its Pd complex were confirmed by using FT-IR and ¹H-NMR spectroscopy. Elemental analysis of Pd by inductively coupled plasma (ICP) technique and hot filtration test showed loading of the metal into solution from the catalyst The heterogeneous catalyst was recycled without any loss in its properties.     

Reactions of 2-Amino-4-methyl-6-(2-pyridyl)- and 2-Amino-4-methyl-6-phenyl-7,8-dihydroindazolo[4,5-d]thiazoles with Aldehydes

The reaction of 2-amino-4-methyl-6-(2-pyridyl)-7,8-dihydroindazolo[4,5-d]thiazole, obtained by treating 3-methyl-4-oxo-1-(2-pyridyl)-4,5,6,7-tetrahydroindazole with pyridinium bromide perbromide and then with thiourea, and 2-amino-4-methyl-6-phenyl-7,8-dihydroindazolo[4,5-d]thiazole with 4-bromo-, 4-fluoro-, 4-dimethylamino-, 4-methoxy-, 3,4-dimethoxy-, and 3,4-methylenedioxybenzaldehydes, furfural, pyridinecarbaldehyde, and thiophenecarbaldehyde gave the corresponding Schiff bases. The products of the condensation of these aminothiazoles with cinnamaldehyde, 1-(2-pyridyl)- and 4-chloro-1-(2,4-difluorophenyl)-5-formyl-3-methyl-6,7-dihydroindazoles, 2-formyl-dimedone, and 2-formyl-1,3-indanedione were also obtained.     

Reaction of imidazole series aldeydes with bis[2-(2-pyridyl)ethyl]-phosphine chalcogenides: Synthesis of polyfunctional heterocyclic systems

The nucleophilic addition of bis[2-(2-pyridyl)ethyl]phosphine sulfide and bis[2-(2-pyridyl)-ethyl]phosphine selenide to 2-formyl-1-organylimidazoles and benzimidazoles occurs efficiently without catalysis at room temperature to give functionalized heterocyclic compounds containing imidazole, benzimidazole, and pyridine rings and also chalcogenophosphoryl and hydroxyl groups. Dedicated to Professor A. Pozharskii on his 70th jubilee Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 11, pp. 1669–1675, November, 2008.     

Pyridyl-substituted [1,3]Dithiolo-[4,5-<Emphasis Type="Italic">b</Emphasis>][1,4]dithiine-2-thiones

We have obtained 5-(2-pyridyl)[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione for the first time by cycloaddition of 2-ethynylpyridine to 4,5-dihydro-1,3-dithioltrithione (isotrithionedithiol). We have studied this thione, 5-(2-pyridyl)- and 5-(4-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thiones by mass spectroscopy and also IR, UV, ¹H and ¹³C NMR spectra. We have determined the crystal and molecular structure of 5-(2-pyridyl)-5,6-dihydro[1,3]dithiolo[4,5-b][1,4]dithiine-2-thione.__________Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 3, pp. 429–434, March, 2005.     

4,5-Dihydropyrazolo[3,4-f]quinazolines

By reaction of 6-dimethylamino-5-oxo-2-phenyl-5,6,7,8-tetrahydroquinazoline with hydrazine, phenylhydrazine, 4-bromo-, 4-chlorophenylhydrazines, and also reaction of 6-dimethylaminomethylene-5-oxo-2-(4-pyridyl)-5,6,7,8-tetrahydroquinazoline with hydrazine, 4-methoxy- and 2-carboxyphenylhydrazines, we have obtained the corresponding 7-phenyl(4-pyridyl)-substituted 1H(2H)- or 1-aryl-4,5-dihydropyrazolo[3,4-f]quinazolines. Methylation of 7-phenyl-4,5-dihydro-1(2H)-pyrazolo[3,4-f]quinazoline by methyl iodide led to its 2-methyl derivative.     

Catalyst-free 2+2 Photodimerization of 1,4-Bis[2-(4-pyridyl)ethenyl]-benzene in Solution Under Low Power UV Irradiation

Two different kinds of configurations of 1,4-bis[2-(4-pyridyl)ethenyl]-benzene(trans-bpeb and cis-bpeb) were achieved, and a bpeb dimer was synthesized in dimethyl sulfoxide(DMSO). Compared with the previous work that synthesized the bpeb dimer or polymer in crystal with a template agent needed, the reaction occurred in a solution phase in the present method. A hand-held ultraviolet lamp(365 nm) with the power of 12 W and the Watt density of 0.35 mW/cm² can realize the photodimerization of bpeb, instead of the high-power mercury lamp in most previous studies. Unlike other 2+2 cycloaddition in liquid state using catalysts even noble metals, no catalysts were required here, which is cost-saving. Only the trans-pbeb can start the cycloaddition and the formation of the close J-aggregations of trans-pbeb in DMSO is a precondition for explaining the 2+2 photodimerization. The productivity for the 2+2 cycloaddition product was achieved as 55.6%.     

Synthesis and Crystal Structure of a Polyoxomolybdate Framework Modified by Mn-L Units（L=3-（2-Pyridyl）pyrazole）

A new polyoxomolybdate compound,namely {[MnII(L)(4,4?-Hbipy)(H2O)2]2 [Mo5O15(PO4)2]}.2H2O 1(L = 3-(2-pyridyl)pyrazole,4,4'-Hbipy = protonated 4,4'-bipyridine),was designed and synthesized under hydrothermal conditions.Single-crystal X-ray diffraction analysis result reveals that the [Mo5O15(PO4)2]6-cluster in compound 1 links to two MnII cations via the oxygen of PO43-,which is further coordinated by one 3-(2-pyridyl)pyrazole,one 4,4'-Hbipyridine,and two water molecules.