2-(3-芳氧甲基-4-苯基-1,2,4-三唑-5-硫基)乙酸的微波合成及生物活性研究

在微波辐射条件下, 芳氧乙酰肼经两步反应制得4-苯基-3-芳氧甲基-1,2,4-三唑-5-硫酮衍生物, 再与氯乙酸反应得到6种尚未见文献报道的2-(3-芳氧甲基-4-苯基-1,2,4-三唑-5-硫基)乙酸衍生物. 目标化合物的结构经IR, ¹H NMR和元素分析进行了确证. 生物活性试验结果表明, 该类化合物对双子叶植物油菜具有良好的生物调节活性.     

3’-叠氮-3’-脱氧胸苷-α-羟基膦酸酯衍生物的合成

在碱性条件下, 抗病毒核苷衍生物3’-叠氮-3’-脱氧胸苷(AZT)-5’-氢亚膦酸二酯与芳香醛加成反应得到4个3’-叠氮-3’-脱氧胸苷-α-羟基膦酸酯类衍生物, 通过31P NMR, 1H NMR, ESI-MS及元素分析对其结构进行了表征确认.     

2′-芳基-3-(1,4,5,6-四氢-6-哒嗪酮-3-羰基)氨基硫脲及其环化产物的合成

以α-酮戊二酸为起始原料,合成了1,4,5,6-四氢-6-哒嗪酮-3-甲酰肼(2),然后将2与异硫氰酸芳基酯反应得到相应的芳基氨基硫脲衍生物3a～3f.用硫酸、醋酸汞或氢氧化钠分别将芳基氨基硫脲环化得到一系列新的1,3,4-噻二唑、1,3,4-噁二唑和1,2,4-三唑的衍生物.化合物的结构经元素分析,IR,1H NMR和MS谱得以证实.     

1-(4-取代苯基)-4-苯基-5-(2-羟基苄基)氨基-1,2,3-三唑类衍生物的合成及抑菌活性

将邻羟苯基引入1,2,3-三唑结构中, 设计合成了10个1-(4-取代苯基)-4-苯基-5-取代-1,2,3-三唑类衍生物. 首先, 以对位取代的芳胺为原料, 经重氮化、叠氮化、闭环和缩合反应制得1-(4-取代苯基)-4-苯基-5-水杨醛亚胺-1,2,3-三唑类衍生物(3a~3e), 再用硼氢化钠还原制得1-(4-取代苯基)-4-苯基-5-(2-羟基苄基)氨基-1,2,3-三唑类衍生物(4a~4e). 目标化合物的结构经核磁、IR及元素分析确认. 抑菌活性测试表明, 当质量浓度为0.1 mg/L时, 除化合物3e和4e外, 所有化合物对白色念球菌的抑菌率均达95%以上, 对大肠杆菌的抑菌率达85%以上, 具有强抑菌活性, 表明该类化合物在抗菌药物开发方面有重要应用价值.     

高能量密度材料3,3′-偶氮-1,2,4,5-四嗪衍生物的分子设计

运用密度泛函理论(DFT)方法,计算系列3,3′-偶氮-1,2,4,5-四嗪衍生物的生成热.结果显示:—N3取代基在增加3,3′-偶氮-1,2,4,5-四嗪衍生物的生成热方面起了非常重要的作用.通过分析标题化合物的最弱键离解能发现:—NH2或—N3取代基非常有利于增加衍生物的热稳定性.计算的爆速(D)和爆压(p)数值表明:—NO2或—NF2取代基有利于提高3,3′-偶氮-1,2,4,5-四嗪衍生物的爆轰性能.综合爆轰性能和热稳定性的计算结果,3种3,3′-偶氮-1,2,4,5-四嗪衍生物可以作为潜在的品优高能量密度材料(HEDM)候选物.     

微波辐射下合成3-芳基-9-氨基-1,2,3,4-四氢吖啶-1-酮衍生物

在微波辐射和对甲基苯磺酸的催化作用下, 5-芳基-1,3-环己二酮与邻氨基苯甲腈进行缩合反应, 得到了N-取代的2-氨基苯甲腈衍生物, 在K₂CO₃和Cu₂Cl₂的催化作用下进一步合环, 得到3-芳基-9-氨基-1,2,3,4-四氢吖啶-1-酮衍生物, 用LiAlH₄还原羰基得到3-芳基-9-氨基-1,2,3,4-四氢吖啶-1-醇衍生物. 新合成化合物的结构均经元素分析、红外光谱和核磁共振光谱予以确认.     

N-(3-苯基-2,3,4-三唑甲酰氨基)-N＇-芳酰基硫脲及其环化产物的合成

以PEG-400为相转移催化剂,通过2-苯基-1,2,3-三唑-4-甲酰基肼与芳酰基异硫氰酸酯的加成反应,合成了系列新的酰胺基硫脲衍生物(3),3分别在酸性和碱性条件下环化制得相应的1,3,4-噻二唑衍生物和1,2,4-三唑啉-5-硫酮衍生物,并经元素分析、IR,1H NMR和MS确证结构.     

3-[2,6-二氯-4-(3,3-二氯烯丙氧基)苯氧基]丙基吡唑-5-羧酸酯类衍生物的合成及杀虫活性

以3-[2,6-二氯-4-(3,3-二氯烯丙氧基)苯氧基]丙醇和5-吡唑甲酸衍生物为原料,设计并合成了14个未见报道的3-[2,6-二氯-4-(3,3-二氯烯丙氧基)苯氧基]丙基吡唑-5-羧酸酯类衍生物.目标化合物的结构经IR,1HNMR和元素分析测定确认.初步杀虫活性测试结果表明,该类化合物对鳞翅目害虫具有较好的杀虫活性.     

3-取代-4-氧-3H-咪唑并[5,1-d][1,2,3,5]四嗪-8-羧酸衍生物抗癌活性的构效关系

采用量子化学和分子力学方法研究3-取代-4-氧-3H-咪唑并[5,1-d] [1,2,3,5]四嗪-8-羧酸衍生物分子结构与抗癌活性的关系.结果表明,3-取代-4-氧-3H-咪唑并[5,1-d] [1,2,3,5]四嗪-8-羧酸衍生物抗癌活性与分子疏水性参数logP、8位取代基R1上的净电荷等因素有关,可通过向8位引入带正电荷取代基的办法来提高先导化合物的抗癌活性.     

3-氧-11,12,13-三羟基桉烷-4-烯的简便全合成

报道了一种全合成3-氧-11,12,13-三羟基桉烷-4-烯(1)的简便方法. 对于该化合物及其衍生物的药理活性研究目前正在进行中.     

Die Kristallstruktur des W3CoB3 und der dazu isotypen Phasen Mo3CoB3, Mo3NiB3 und W3NiB3

Zusammenfassung Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃ und W₃NiB₃ kristallisieren in einem eigenen Typ (W₃CoB₃-Struktur). Das trigonal prismatische Bauelement [T ₆B]^* ist zu Ketten vereinigt, wobei B₃-Gruppen entstehen. Die Phasen sind vermutlich Bor-reicher als obiger Formel entspricht.

---

The crystal structure of W₃CoB₃ and the isotypic phases Mo₃CoB₃, Mo₃NiB₃, and W₃NiB₃

Mo₃CoB₃, Mo₃NiB₃, W₃CoB₃, and W₃NiB₃ were found to possess a new type of crystal structure (W₃CoB₃-structure type). Trigonal prismatic groups [T ₆B]^* are linked together forming chains in such a way that B₃-groups occur. These borides do probably exist with a larger amount of boron as to compared with the formula.

---

---

Mit 2 Abbildungen     

γ-Nitro-γ-butyrolacton

γ-Nitro-γ-butyrolactone By oxidation of 3-(1-nitro-2-oxocyclohexyl)propanal ( 1 ) with KMnO₄, besides 3-(1′-nitro-2′-oxocyclohexyl)pripionic acid ( 2 ), the complete hydrolysis product 4-oxononanedioic acid ( 4 ) and the oxidized semi-hydrolysis product 5-(2-nitro-5-oxotetrahydro-2-furyl)pentanoic acid ( 3 ) were formed. The crystalline 3 decomposes at r.t. forming 4 and nitrous gases; its structure was established by X-ray determination.     

Synthesis of γγγ-trifluorocarbonyl compounds

γγγ-Trifluorocarbonyl compounds are easily obtained in a good yield by introduction of the 1,1,1-trifluoroethyl moiety (CF₃-CH₂-) on the -methylene group of a ketone.     

3x-pyrrolizin-3-ones

Condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groups, in the KOH-DMSO system, was used to prepare previously unknown 1-alkylthio-3H pyrrolizin-3-ones. The latter, treated with secondary amines, are readily converted to the corresponding 1-amino derivatives.     

3-H-pyrrolizin-3-ones

Previously unknown 1-alkylthio-3H-pyrrolizin-3-ones have been obtained by the condensation of pyrrole-2-dithiocarboxylates with CH acids containing ester groupings in the KOH-DMSO system. On treating the products with secondary amines they are readily converted into the corresponding 1-amino derivatives.Irkutsk Branch of the Russian Academy of Sciences, Irkutsk 664033. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 919–924, July, 1996. Original article submitted May 2, 1996.     

K3BiSe3, Rb3BiSe3 und Cs3BiSe3 – Substitutionsvarianten des Th3P4-Typs

K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ – Derivatives of the Th₃P₄ Structure Type The compounds K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃ were synthesized by heating mixtures of Bi₂O₃ and the respective alkalicarbonate in a stream of hydrogen saturated by selenium at 850°C. Thin crystals of the compounds appear red in transmitted light. They crystallize isostructural with Na₃AsS₃, space group P2₁3, lattice constants a = 9.771(5) Å, a = 10.161(3) Å, and a = 10.587(5) Å for K₃BiSe₃, Rb₃BiSe₃, and Cs₃BiSe₃, respectively. The Na₃AsS₃ structure type is a derivative of the Th₃P₄ structure type.     

Die Akzeptoreigenschaften von AsCl3, AsBr3, asJ3, SbCl3, SbBr3 und SbJ3

Zusammenfassung Es wurden die Enthalpien der Reaktionen von AsCl₃, AsBr₃, AsJ₃, SbCl₃, SbBr₃ und SbJ₃ mit Tributylphosphat, N,N-Dimethylacetamid und Hexamethylphosphorsäuretriamid bestimmt. Das Verhalten der Addukte bei Gegenwart eines Überschusses der Donoren wird beschrieben.

---

Acceptor properties of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃, and SbI₃

The enthalpies of the reactions of AsCl₃, AsBr₃, AsI₃, SbCl₃, SbBr₃ and SbI₃ with tributylphosphate, N,N-dimethylacetamide and hexamethylphosphoric acid triamide were measured. The behavior of the adducts in the presence of excess donor molecules is described.

---

---

Mit 5 Abbildungen     

Freezing the polarization of CH3NH3PbI3 and CH3NH3PbI3-xClx perovskite films

Thin films of methylammonium lead halides, CH₃NH₃PbI₃ and CH₃NH₃PbI_3-xCl_x, were deposited onto symmetrical microstructured electrode arrays of gold or platinum on Si/SiO₂ wafers. Polarization studies were carried out on perovskite films under vacuum in the dark. For poling, a constant voltage was applied to the samples while the temperature was cycled between 295 K and 4 K. The measured current densities depending on the temperature showed distinct characteristics relating strongly to the crystal phase and the dielectric properties of the perovskite films. Voltage sweeps were carried out at different scan rates at specific temperature intervals after poling. The polarization of the films due to the migration of iodide vacancies in direction of the blocking perovskite/metal interface was frozen almost up to room temperature. Charge carriers were only able to cross the blocking barrier and contribute to the current where the ions have accumulated during poling. All J-V curves showed hysteresis: inverted and regular hysteresis at room temperature and below, respectively. Inverted hysteresis originates from the slow accumulation of ions at the blocking barrier, while regular hysteresis arises from a distortion in the adjacent crystals which will be discussed.