养殖水体中孔雀石绿的三维荧光斜投影分析方法研究

基于三维荧光光谱仪以及斜投影算法,建立了养殖水体中孔雀石绿含量的快速分析模型。首先向样品中加入足量硼氢化钾粉末,将水溶性的孔雀石绿(MG)完全转化为不溶于水的隐性孔雀石绿(LMG),然后加入等体积的乙腈溶解LMG,通过三维荧光检测LMG的含量进而转化得到养殖水体中MG的含量,可提高检测灵敏度。结果表明:基于斜投影算法进行化学计量学分析,可以减少样品的假阴性率和假阳性率,测定结果与高效液相色谱法测定结果一致,与平行因子算法相比较,斜投影算法的相对误差较小,LMG标准品在0.02～0.60μg·mL~(-1)浓度范围内线性关系良好,相关系数r=0.9984,检出限为1.28×10~(-2)μg·mL~(-1),加标回收率在83.33%～100.00%之间,精密度RSD≤0.55%。三维荧光光谱仪检测灵敏度高,样品采集快速,结果准确可靠,可用于多组分混合物的检测分析。     

超高效液相色谱-串联质谱法测定水产品中孔雀石绿、结晶紫及其代谢物残留量

采用超高效液相色谱-串联质谱法同时检测水产品中孔雀石绿、结晶紫及其代谢物(隐色孔雀石绿、隐色结晶紫)。经匀浆处理的水产品样品,用乙腈提取,加入酸性氧化铝去除油脂,旋转蒸发器蒸干后,用甲酸-乙腈-水(0.1+10+89.9)溶液溶解,样品溶液用超高效液相色谱分离,电喷雾串联四极杆质谱进行检测。以氘代孔雀石绿、氘代隐色孔雀石绿为内标物。孔雀石绿、结晶紫及其代谢物的质量浓度均在5.0μg·L-1以内与其峰面积呈线性关系,检出限(3S/N)在0.10～0.12μg.kg-1之间。以空白水产品样品为基体进行回收试验,方法的回收率在90.2%～108.0%之间,相对标准偏差(n=6)在2.3%～7.6%之间。     

超高效液相色谱-串联质谱法测定养殖水和沉积物中孔雀石绿、结晶紫及其代谢物残留

建立了超高效液相色谱-串联质谱(UPLC-MS/MS)同时测定养殖水和沉积物中孔雀石绿、结晶紫及其代谢物(隐性孔雀石绿和隐色结晶紫)的多残留分析方法。沉积物样品真空冷冻干燥,乙腈和二氯甲烷提取,MCX固相萃取小柱净化;养殖水试样真空冷冻干燥,50%乙腈-水溶液(含0.1%甲酸)溶解残渣,离心过膜,上机检测。经BEH C18色谱柱分离,梯度洗脱,多反应监测正离子模式下进行定量和定性分析。采用内标法定量,药物含量在0.50~50μg/L范围内线性关系良好,相关系数大于0.99;以3倍和10倍信噪比计算出养殖水的检测限和定量限为10~25 ng/L和25~50 ng/L,沉积物的检测限和定量限为0.020~0.025μg/kg和0.04~0.05μg/kg;平均回收率为85.2%~105.6%,相对标准偏差小于12%。方法已用于实际养殖水和沉积物样品中违禁药物的测定。     

高效液相色谱-串联质谱法测定沉积物中孔雀石绿及其代谢物

建立了沉积物中孔雀石绿及其代谢物(隐性孔雀石绿)的高效液相色谱-串联质谱检测方法.称取2 g沉积物样品,以乙腈和CH2Cl2超声萃取,旋转蒸发浓缩后,以30%甲醇定溶,经0.45μm滤膜过滤后,应用高效液相色谱-串联质谱测定沉积物中孔雀石绿及其代谢物残留量.本方法MG和LMG线性范围为0.5-100μg/L,相关系数为0.9982和0.9976,仪器检出限为0.2×10-9,定量限为0.5×10-9,MG回收率为44.5%～66.7%,LMG回收率31.4%～53.3%,方法检出限为2.0 ng/g.该方法适用于沉积物中痕量孔雀石绿及其代谢物的检测.     

基于金属有机框架水凝胶的一步式快速富集检测养殖水体中孔雀石绿北大核心CSCD

孔雀石绿是一种三苯甲烷类化合物,在水产品饲养中对疾病的防治有着不错的疗效,但因对人体健康有危害而被列为禁用药。由于实际样品中成分复杂,对于此类染料的检测方法难以同时兼具富集性好、灵敏度高且方便快速的优点。该工作制备了金属有机框架材料(MOF),采用MOF纳米材料掺杂的水凝胶(PAAM-SA/MOF)对养殖水体中的孔雀石绿进行吸附研究。采用一系列表征手段对MOF、PAAM-SA和PAAM-SA/MOF的微观形貌进行分析,结果表明吸附材料已成功合成。通过优化水凝胶吸附剂用量、吸附时间、孔雀石绿溶液pH、吸附温度、孔雀石绿溶液初始浓度等吸附萃取条件,使溶液中的孔雀石绿基本完全吸附在水凝胶中,在最优条件下,吸附效率最高可达97%。此外,采用不同极性的有机溶剂对吸附的孔雀石绿进行洗脱,通过优化洗脱液体积,脱附率最高达99%。在最佳条件下,该方法在高、中、低3个水平下的样品加标回收试验中回收率达到84.8%~118.1%,相对标准偏差小于5.1%,方法的检出限为0.083μg/L(S/N=3),定量限为0.25μg/L(S/N=10)。该方法简化了前处理过程,结合了MOF和水凝胶这二者各自的优点,添加的MOF材料可以在水凝胶体系中发挥其良好的吸附性,既解决了传统的MOF材料因粒径太小而回收率低的难题,便于吸附后直接提取,同时也解决了纯水凝胶吸附效率较低的问题,整体上提高了吸附效率和可回收性。实际样品测试表明该新型水凝胶吸附材料可用于养殖水体中孔雀石绿的快速萃取和检测,在食品检测领域具有很大潜力。     

超高效液相色谱-串联质谱法测定水产品中孔雀石绿前处理方法的改进

采用超高效液相色谱-串联质谱法(UPLC-MS/MS)测定水产品中孔雀石绿的残留量,以GB/T 19857-2005检测方法为基础,将前处理步骤进行优化.称取5 g样品,加入质量浓度为100μg/L的内标标准溶液100μL,混匀,加入20 m L乙腈、5 g酸性氧化铝,震荡、离心,取4 m L溶液氮气吹干,用流动相定容至1 m L,过0.22μm滤膜,上机测试.按照标准方法测定标准曲线相关系数r:孔雀石绿为0.999,隐色孔雀石绿为0.999.孔雀石绿的回收率分别为71.7%、95.2%和89.9%,精密度分别为4.47%、4.26%和8.57%.隐色孔雀石绿的回收率分别为93.3%、98.8%和89.7%,精密度分别为8.73%、6.87%和9.71%.试验结果满足相关标准和体系文件的要求.     

液相色谱串联质谱法测定养殖水体中孔雀石绿及其代谢物

研究利用液相色谱-串联质谱(LC-ESI-MS/MS)测定水产品养殖水体中孔雀石绿及其代谢物隐性孔雀石绿的方法.通过一系列实验对样品前处理条件进行了优化研究,养殖水样经乙酸酸化,净化后,采用HPLC-ESI-MS/MS检测分析.在多反应监测模式(MRM)下,外标法定量,定量限均为0.5μg/kg.在0.5～50μg/L...     

超高效液相色谱-串联质谱法测定鱼粉中孔雀石绿

建立了鱼粉中孔雀石绿及其代谢物隐色孔雀石绿残留量的超高效液相色谱-串联质谱仪(UPLC-MS-MS)测定法。样品经乙腈提取,中性Al2O3固相小柱净化,超高效液相色谱C18柱分离,电喷雾正离子多反应模式(MRM)检测,内标法定量。方法的定量限为1.00μg/kg,线性范围为0.25～20.0μg/L。在1.00～20.0μg/kg的加标量下,孔雀石绿平均回收率范围为85.3%～104.4%,隐色孔雀石绿平均回收率范围为85.7%～101.4%,相对标准偏差均小于15%。方法适用于鱼粉样品中孔雀石绿残留的快速检测。     

酶联免疫吸附分析法测定水产品及水中孔雀石绿和无色孔雀石绿

本文报道一种同时测定水产品及水样中孔雀石绿(MG)和无色孔雀石绿(LMG)的间接竞争酶联免疫吸附分析法。对无色孔雀石绿分子进行修饰,使其与载体蛋白交联,得到免疫原和包被抗原,经过多次免疫动物制得抗无色孔雀石绿的多克隆抗体。在优化的实验条件下,IC50值(标准曲线中吸光度抑制至最大吸光度值的50%时所对应的待测物浓度)为0.9~2.6μg/L,检出限为0.02~0.10μg/L,无色孔雀石绿在水样及水产品中的回收率为76.2~95.0%,与孔雀石绿的交叉反应率为95.25%。真实样品测定中,两种食用鱼养殖水样及一个鱼样中未检出孔雀石绿和无色孔雀石绿,但在观赏鱼养殖水样及另一鱼样中检出孔雀石绿和无色孔雀石,浓度分别为1.84μg/L和1.38μg/L。     

极谱法检测水体中的孔雀石绿

基于荧光素(SF)在pH=7.0的B-R缓冲溶液中可以产生一灵敏的还原峰,而孔雀石绿(MG)可以与荧光素络合而抑制荧光素的峰电流,建立了一种检测水体中孔雀石绿含量的极谱新方法。最佳测定体系为:1.2×10-5 mol/L的荧光素-9.0mL B-R缓冲溶液(pH=7.0)。在此体系中,于起始电位-0.40V,峰电位-0.85V,孔雀石绿含量在20~100μg/L范围内与峰电流呈线性关系,检出限为7.5μg/L。该方法用于环境水样中孔雀石绿的检测,回收率为90.5%~105.6%。     

Trace determination of malachite green in water samples using dispersive liquid–liquid microextraction coupled with high-performance liquid chromatography-diode array detection

A simple and reliable method has been developed for the rapid analysis of trace levels of malachite green from water samples using dispersive liquid–liquid microextraction and high-performance liquid chromatography-diode array detection. Factors relevant to the microextraction efficiency, such as the type and volume of extraction solvent, nature and volume of the disperser solvent, the effect of salt, sample solution temperature and the extraction time were investigated and optimised. Under the optimal conditions the linear dynamic range of malachite green was from 0.2 to 100.0?µg?L^?1 with a correlation coefficient of 0.9962. The detection limit and limit of quantification were 0.1?µg?L^?1 and 0.3?µg?L^?1, respectively. The relative standard deviation (RSD) was less than 2.6% (n?=?5) and the recoveries of malachite green (5.0?µg?L^?1) from water samples were in the range of 99.2?±?1.7%. Finally the proposed method was successfully applied for the analysis of malachite green from fish farming water samples.     

Supramolecular solvent-based liquid phase microextraction of malachite green at trace level from water samples for its UV–vis spectrophotometric detection

A simple and fast microextraction procedure based on supramolecular solvent extraction of malachite green from water samples has been established in the presented work. The effective analytical parameters including pH, solvent volume, sample volume etc. on the quantitative recoveries of the malachite green were optimised. Matrix effects were also investigated. The preconcentration factor was found as 50. The limit of detection and limit of quantification were 16.3 and 54.5 µg L^?1, respectively. The relative standard deviation percentage was below 7%. The presented procedure was applied to the determination of malachite green content of natural water samples from fish farm and tap water etc.     

孔雀石绿的磁性免疫层析快速检测方法研究

开发了一种适用于现场快速检测孔雀石绿(MG)的免疫层析试纸条,在超顺磁性纳米微球上偶联MG单克隆抗体作为检测探针,分别将孔雀石绿完全抗原(MG-B SA)和羊抗鼠IgG喷涂于NC膜的T线和C线.结果 发现,T线最佳喷涂量为0.25 mg/mL,抗体最佳偶联量为20 μg,构建的试纸条可在25 min内实现养殖用水及鱼肉...     

测定痕量磷的激光热透镜光谱法--钼蓝法与孔雀绿法的比较

采用激光热透镜光谱法（LTLS）,分别以孔雀绿－磷钼杂多酸缔合物法和磷钼蓝法对痕量磷进行了测定;探讨了测定条件的影响,分析比较了两种测定方法,结果表明,钼蓝法的线性范围较宽,孔雀绿法的灵敏度较高,选择性较好,将孔雀绿LTLS法应用于河水、自来水和土壤样品中痕量磷的分析测定,取得了满意的效果。     

Magnetic solid‐phase extraction for determination of the total malachite green,gentian violet and leucomalachite green,leucogentian violet in aquaculture water by high‐performance liquid chromatography with fluorescence detection

In this study, magnetic multi‐walled carbon nanotube nanoparticles were synthesized and used as the adsorbent for the sums of malachite green, gentian violet and leucomalachite green, leucogentian violet in aquaculture water samples followed by high performance liquid chromatography with fluorescence detection. This method was based on in situ reduction of chromic malachite green, gentian violet to colorless leucomalachite green, leucogentian violet with potassium borohydride, respectively. The obtained adsorbent combines the advantages of carbon nanotubes and Fe₃O₄ nanoparticles in one material for separation and preconcentration of the reductive dyes in aqueous media. The structure and properties of the prepared nanoparticles were characterized by transmission and scanning electron microscopy, X‐ray diffraction, and Fourier‐transform infrared spectroscopy. The main parameters affecting the adsorption recoveries were investigated and optimized, including reducing agent concentration, type and amount of sorbent, sample pH, and eluting conditions. Under the optimum conditions, the limits of detection in this method were 0.22 and 0.09 ng/mL for malachite green and gentian violet, respectively. Product recoveries ranged from 87.0 to 92.8% with relative standard deviations from 4.6 to 5.9%. The results indicate that the sorbent is a suitable material for the removal and concentration of triphenylmethane dyes from polluted environmental samples.     

Temperature sensitive molecularly imprinted microspheres for solid-phase dispersion extraction of malachite green,crystal violet and their leuko metabolites

This article demonstrates the feasibility of an alternative strategy for producing temperature sensitive molecularly imprinted microspheres (MIMs) for solid-phase dispersion extraction of malachite green, crystal violet and their leuko metabolites. Thermo-sensitive MIMs can change their structure following temperature stimulation. This allows capture and release of target molecules to be controlled by temperature. The fabrication technique provides surface molecular imprinting in acetonitrile using vinyl modified silica microspheres as solid supports, methacrylic acid and N-isopropyl acrylamide as the functional monomers, ethyleneglycol dimethacrylate as the cross-linker, and malachite green as the template. After elution of the template, the MIMs can be used for fairly group-selective solid phase dispersion extraction of malachite green, crystal violet, leucomalachite green, and leucocrystal violet from homogenized fish samples at a certain temperature. Following centrifugal separation of the microspheres, the analytes were eluted with a 95:5 mixture of acetonitrile and formic acid, and then quantified by ultra-high performance liquid chromatography tandem mass spectrometry (UHPLC-MS/MS) with isotope internal calibration. The detection limits for malachite green, crystal violet and their metabolites typically are 30 ng·kg^?1. Positive samples were identified by UHPLC-MS/MS in the positive ionization mode with multiple reaction monitoring. The method was applied to the determination of the dyes and the respective leuko dyes in fish samples, and accuracy and precision were validated by comparative analysis of the samples by using aluminum neutral columns.

Open image in new window

Graphical abstract We describe an alternative strategy for producing temperature sensitive molecularly imprinted microspheres for solid-phase dispersion extraction of malachite green, crystal violet and their metabolites in fish samples.

     

Green Determination of Total Iron in Water by Digital Image Colorimetry

A green iOS digital image colorimeter was fabricated for the determination of total iron in natural water. A mobile application operating on an iOS device was designed using Euclidean distance theory to perform iron determination. The application records the components of the color by storing red, green, and blue values as well as calculating the hue, saturation, brightness, and gray values using standard color theory. The component values obtained from the images of orange solutions of iron(II) complex with 1,10-phenanthroline were collected in a database and used for evaluation of the total iron concentration in water samples. Under the optimal conditions for solid-phase extraction used for sample preconcentration, the enrichment factor was 8.18. The iron concentration was determined by this device for concentrations from 0.01 to 1.0?ppm. The iOS digital image colorimeter achieved a limit of quantitation of 0.1?ppm. The accuracy and precision of the iOS digital image colorimeter were validated using a certified reference material, riverine water. The instrumentation was used for the analysis of natural water samples.     

A new reagent system for the highly sensitive spectrophotometric determination of selenium

Highly sensitive and simple spectrophotometric determination of selenium is described for the determination of selenium(IV) using a new reagent leuco malachite green. The method is based on the reaction of selenium(IV) with potassium iodide in an acidic condition to liberate iodine, the liberated iodine oxidizes leuco malachite green to malachite green dye. The green coloration was developed in an acetate buffer (pH 4.2–4.9) on heating in a water bath (∼ 40 °C). The formed dye exhibits an absorption maximum at 615 nm. The method obeys Beer’s law over a concentration range of 0.04–0.4 μg mL⁻¹ selenium. The molar absorptivity and Sandell’s sensitivity of the color system were found to be 1.67 × 10⁵ L mol⁻¹ cm-¹ and 0.5 ng cm⁻², respectively. The optimum reaction conditions and other analytical parameters have been evaluated. The proposed procedure has been successfully applied to the determination of selenium in real samples of water, soil, plant material, human hair, and cosmetic samples. The results were compared to those obtained with the reference method. Statistical analysis of the results confirms the precision and accuracy of the proposed method. In addition, the developed method is cost-effective and involves easily accessible instrumentation technique which can be used by ordinary research laboratories.