TiO2纳米晶光催化降解铬酸根离子的研究

以二氧化钛为光催化剂,研究了溶液的ｐＨ值、铬酸根离子的初始浓度、通入的气体种类、氧化钛的载量等因素对铬酸根离子降解率的影响。同时合成了粒径小于１０ｎｍ的锐钛矿相和金红石相氧化钛纳米晶来考察晶相和尺寸效应对降解率的影响。结果表明,锐钛矿的催化活性高于金红石相,两者的催化活性均大大高于市售的氧化钛微粉。     

NH3处理温度对N掺杂P25-TiO2的可见光催化活性的影响

研究了NH3处理温度对N掺杂P25-TiO2可见光催化活性的影响以及可见光催化活性与表面组成和结构的关系．实验结果表明：NH3处理温度在600℃时,有最高活性;在700℃,P25-TiO2转变为以金红石相为主,表面未发生N掺杂,这与700℃时NH3分解有关;N掺杂浓度、可见光吸收两者与可见光催化活性之间均不存在顺变关系．讨论揭示：N掺杂P25-TiO2的可见光催化活性是由三个要素协同作用产生：（i）表面生成大量束缚单电子氧空位（Vo）,（ii）表面有N掺入,（iii）晶型以锐态矿为主,三者缺一不可．     

新型N-TiO2的固相法制备及其光催化性能

以纳米管钛酸为前驱体,以NH4HCO3为N源,先机械研磨使二者混合均匀,再在Ar保护下,于不同温度焙烧4h制得N掺杂TiO2 (N-TiO2),并采用X射线粉末衍射、X射线光电子能谱、紫外-可见吸收光谱、透射电镜及N2吸附-脱附对样品进行了表征.结果显示,N以间隙掺杂方式进入TiO2晶格内.在热处理过程中,生成中间体(...     

C-N-S-TiO2光催化剂的制备、表征及其性能

以钛酸四丁酯为钛源、功能生物小分子胱氨酸为掺杂剂,采用溶胶-凝胶法同步合成了C-N-S-TiO2光催化剂,利用XRD、XPS、FT-IR和DRS等测试技术对样品的结构及物化性能进行了表征。XRD和DRS分析表明,共掺杂抑制了TiO2晶粒的生长,提高了晶相转变温度,且C-N-S-TiO2样品的吸收带边明显"红移",光吸收范围一直延长至800 nm左右。XPS分析结果显示,C-N-S-TiO2样品表面产生了杂质能级,C、S元素分别取代部分晶格Ti4+以CO23-和S6+形式存在;而N峰呈宽化状态,以O—Ti—N和Ti—O—N键存在,且样品表面羟基含量明显增加。以罗丹明B染料为模型污染物,考察了该催化剂的可见光催化活性。结果表明,与P25 TiO2比较,C-N-S-TiO2光催化剂活性得到改进,C-N-S-TiO2光催化剂在470～800 nm波长下辐射120 min后对罗丹明B的降解率可高达83%。     

铽负载介孔二氧化钛的制备、表征和协同效应

以嵌段共聚物P123为模板剂,采用蒸发诱导自组装法制备了铽负载介孔TiO2光催化剂,并利用XRD、N2吸附解吸和UV-Vis吸收光谱等技术手段对样品进行了表征。 制备的样品为锐钛矿和金红石混合晶相,以罗丹明B为模拟有机降解物,样品显示了良好的可见光催化活性。 研究发现0.7%的铽负载和380 ℃的煅烧温度是较佳的制备条件。 介孔结构所具有的高的比表面积、小的晶粒尺寸、铽负载诱导的电荷分离和可见光吸收增强协同提高了光催化活性。 同时,提出了铽负载二氧化钛诱导增强光催化作用的机理。     

表面相结结构在促进光催化电荷分离中的应用

二十世纪八十年代以来,特别是近十年,光催化研究在利用可再生能源太阳能的道路上飞速发展。越来越多的研究表明,相结结构的构筑是有效提高半导体光催化剂性能的重要策略。其中, TiO2作为重要的模型光催化剂,其相关研究成果呈现出指数增长的趋势。本综述围绕TiO2模型光催化剂,主要介绍TiO2表面相结的研究成果,包括TiO2表面相的表征、锐钛矿：金红石TiO2相结用于光催化产氢研究、TiO2相结在光催化中作用的最新认识等。在表征方面,通过表面灵敏的紫外拉曼光谱研究了TiO2相变过程中表面相结构的变化,结合可见拉曼以及XRD表征揭示了TiO2独特的相变过程,即相变始于锐钛矿粒子的界面处,小粒子逐渐团聚为大粒子,致其相变从大粒子体相开始最终扩展到整个粒子。使用CO, CO2探针红外光谱,根据锐钛矿和金红石表面吸附物种的差异,进一步证实了锐钛矿：金红石表面相结结构,为紫外拉曼光谱的表面表征特性提供坚实证据。同时,利用发光光谱观察到锐钛矿晶相的可见发光带和金红石晶相的近红外发光带,并基于此给出了TiO2材料表面相结结构的荧光表征新方法。此外荧光光谱还提供了锐钛矿、金红石相中载流子动力学信息,揭示了束缚态在光催化中的作用。在光催化应用方面,观察到混相结构TiO2较单独锐钛矿及金红石相具有更高的光催化产氢活性,通过在较大金红石颗粒上担载纳米锐钛矿粒子,证明了相结结构在提高光催化活性中的核心作用,并首次提出了锐钛矿：金红石表面异相结结构概念,推断其对电荷分离的促进作用是最终提高反应活性的原因。之后将此概念应用到改善商品TiO2(P25)光催化活性中,通过可控热处理精细调控P25的表面相结构,在光催化重整生物质衍生物产氢实验中,成功将P25光催化产氢活性提高3?5倍。之后发展了新的TiO2表面控制方法,通过加入Na2SO4等相变控制剂,延缓了TiO2从锐钛矿向金红石的相变过程,在较高温度下实现TiO2相结结构的调控,最终可将P25光催化重整甲醇制氢的活性提高6倍,同时通过高分辨电镜清晰观察到锐钛矿：金红石相结的原子层生长接触。在相结作用机理方面,多种时间分辨光谱技术以及理论计算被用作探索锐钛矿：金红石相结处的电子转移机理。通过时间分辨红外光谱对TiO2表面相结结构作用的研究,特别是利用锐钛矿、金红石不同的瞬态吸收光谱特征,证明了锐钛矿：金红石相结处的载流子转移过程,存在锐钛矿向金红石的电子转移过程。模型光催化剂TiO2相结的研究成果,加深了对光催化机理的认识,促进新型高效光催化体系的设计合成。     

微乳法合成纳米SiO2/TiO2及其光催化性能

采用聚乙二醇辛基苯基醚(Triton X-100)/正己醇/环己烷/氨水微乳体系合成了纳米TiO2和SiO2/TiO2复合物,用X射线衍射、红外光谱和透射电镜对其结构进行了表征,并以甲基橙降解评价了其光催化性能,讨论了SiO2/TiO2摩尔比、晶相组成及粒径与光催化活性的关系.结果表明,SiO2/TiO2催化剂中形成了新的Ti-O-Si键和无定形SiO2;在纳米TiO2中复合SiO2能有效抑制锐钛矿向金红石的转变,增加锐钛矿的稳定性,并阻止TiO2晶粒的聚集生长.催化剂的光催化活性随金红石含量的增加而降低,加入适量SiO2能明显提高TiO2的光催化活性,其中摩尔比为1/7的SiO2/TiO2光催化活性最高.     

二氧化钛基固体超强酸的结构及其光催化氧化性能

采用溶胶－凝胶法制备了多孔性,大比表面积的ＳＯ４＾２－／ＴｉＯ２固体超强催化剂,运用ＸＲＤ,ＢＥＴ比表面积测定,ＸＰＳ和ＵＶ－Ｖｉｓ反射光谱等技术对该催化剂的结构,表面状态以及半导体特征进行了表征,并通过ＣＨ３Ｂｒ,Ｃ６Ｈ６和Ｃ２Ｈ４等典型有机物的气相光催化氧化反应。     

Preparation of controllable crystalline titania and study on the photocatalytic properties

Nanocrystalline TiO(2) catalysts with different anatase/rutile ratios and high surface area (113-169 m(2)/g) have been prepared at low temperature by the microemulsion-mediated hydrothermal method. The samples were characterized by x-ray diffraction (XRD), Fourier transform (FT)-IR spectra, UV-vis diffuse reflectance spectra, and nitrogen adsorption-desorption methods. The contents of anatase and rutile phases in the TiO(2) powders have been successfully controlled by simply changing the proportion of Cl(-) and SO(4)(2-) in the aqueous phase of the microemulsion. A proposed mechanism involving bidentately chelated sulfate is discussed to explain the variation of the crystalline phase in the TiO(2) powder. The photodegradation of methyl orange (MO) in water has been investigated over titanium dioxide consisting of different anatase/rutile ratios. The catalyst containing 74.2% anatase showed the highest photocatalytic activity, which is due to a synergistic effect between anatase and rutile. The synergism was also found for the photodegradation of MO with physically mixed anatase and rutile as catalysts.     

SiO2负载的TiO2光催化剂可见光催化降解染料污染物

 采用酸催化溶胶-凝胶法制备了SiO2负载的TiO2光催化剂,考察了制备条件对负载型TiO2光催化剂的晶相、结构、比表面积和可见光催化活性的影响. 结果表明,采用SiO2为载体时,TiO2以纳米颗粒的形态分散在载体表面,负载型TiO2/SiO2催化剂的比表面积大、等电点低而且热稳定性能良好. 偶氮染料酸性橙7的可见光催化降解实验结果表明,染料污染物在催化剂表面的吸附是影响催化剂可见光催化活性的重要因素. 与试剂TiO2样品相比,负载型TiO2/SiO2光催化剂具有更好的光催化活性和沉降性能.     

纳米管钛酸CO处理产物的结构及光催化活性

研究了在CO气流中,处理温度对纳米管钛酸(NTA)脱水产物TiO₂的结构及C₃H₆光催化氧化反应活性的影响.结果表明:NTA经CO高温处理后,样品未发生C掺杂,只有碳沉积发生;随着处理温度的升高,样品的比表面积大幅下降,与NTA在空气中焙烧处理相比,由锐钛矿向金红石TiO₂转变的温度提前;CO处理后产物对C₃H₆均未表现出可见光催化性能,但具有紫外光催化活性,随着在CO气氛中处理温度的升高,紫外光催化活性降低.     

NH3热还原处理TiO2的结构与光催化活性研究

Different titanium oxide powders (ATiO2, BTiO2) were pretreated in ammonia (NH3) gas at high temperatures. After the pretreatment, the color of the titanium oxide powders changed from white to yellow or gray depending on the pretreatment temperatures. Morphologies and structures of the treated titanium oxide powders were characterized by physical chemical methods. XRD measurements showed that the crystalline structures were mainly mixture of anatase and rutile for the ATiO2 but only anatase for the BTiO2. Stronger absorption of visible light was observed for both types of samples using UV-Vis diffuse reflectance spectra.X-ray photoelectron spectroscopy demonstrated that doped nitrogen existed on the surface TiO2 after ammonia gas pretreatment. The photocatalytic activities of the treated titanium oxide samples were evaluated via the photodegradation of methyl orange and phenol in aqueous suspensions. No obvious improvement in photocatalytic activity was achieved by ammonia pretreatment although it could enhance the absorption of light. Effects of treatment temperatures on photoactivities were complete different for ATiO2 and BTiO2 (i.e. higher treated temperatures yielded higher activities for BTiO2 but lower for ATiO2). All samples yielded lower activity levels after ammonia pretreatment without regard to pretreatment temperature or the reaction light resource.     

微乳法制备纳米TiO2 /SiO2的结构及光催化研究

Nanosized TiO₂ and TiO₂/SiO₂ particles were prepared by hydrolysis of tetrabutyl titanate (TBOT) and tetraethyl orthosilicate (TEOS) in the TX-100 reverse microemulsion. These particles were characterized by TG-DSC, XRD, FTIR, TEM，N₂ adsorption-desorption. Their photocatalytic activity was tested by degradation of methyl orange. The result shows that TiO₂/SiO₂ nanoparticles are with a monodispersed spherical phase and a uniform size distribution，and TiO₂ particles are dispersed on the surface of SiO₂. The band for Ti-O-Si vibration in FTIR was observed, the Ti-O-Si bond increased the stability of anatase TiO₂, suppressed the phase transformation of titania from anatase to rutile. And due to the addition of SiO₂, the average size of titania decreased from 38 nm in pure TiO₂ to 5 nm in TiO₂/SiO₂. It was found, under UV light irradiation, TiO₂/SiO₂ particles showed higher activity than pure TiO₂, and TiO₂/SiO₂(1/1) particles showed the highest photocatalytic activity on the photocatalytic decomposition of methyl orange, which was influenced by crystal structure, particle size, crystallinity and Surface area Characteristics.     

Synthesis of efficient N-containing TiO2 photocatalysts with high anatase thermal stability and the effects of the nitrogen residue on the photoinduced charge separation

Efficient N-containing TiO(2) nanoparticles with high anatase thermal stability were synthesized via a hexamethylenetetramine (HMT)-modified sol-hydrothermal process. The results showed that modification with proper amounts of HMT is effective in increasing the onset temperature of the phase transformation of TiO(2) from anatase to rutile. The enhancement of the anatase thermal stability of the modified TiO(2) was attributed to ammonia produced slowly by hydrolysis of the HMT molecules in the sol-hydrothermal process and, additionally, to the residual nitrogen species after the thermal treatment at high temperatures, as indicated by the XPS examination. Compared with the unmodified TiO(2), the modified TiO(2) obtained by a thermal treatment at high temperatures exhibited good photocatalytic performance under UV light and was found to even be superior to the commercially available P25-TiO(2). It was suggested that the residual N species (Ti-O-N), formed after the thermal treatment at high temperatures, along with the mixed phase composition, large surface area and the increase in the thermal stability, were responsible for the enhanced photocatalytic activity of modified TiO(2). It was demonstrated, by means of the surface photovoltage responses of the modified TiO(2) in different atmospheres along with the aid of an outer electric field, that the residual N species could effectively capture the photoinduced holes, which was favorable for the effective separation of the photoinduced charges. This work provides a feasible route to fabricate high-performance TiO(2)-based functional nanomaterials with high anatase thermal stability.     

水热法合成掺杂铁离子的小管径TiO_2纳米管

碳纳米管这种一维结构的新材料的发现为物理、化学、材料科学和纳米科学开辟了全新的研究领域。近年来,非碳无机类富勒烯(InorganicFullerene-like,简称IF)纳米管也受到人们的广泛关注。迄今为止报道的无机类富勒烯纳米管主要有:过渡金属硫化物(MS2,M=W,Mo,Nb)犤1～3犦、V2O5犤4犦、Al2O3犤5犦纳米管等。其中金属氧化物纳米管在催化、吸附、单电子晶体管等方面有着潜在的应用前景。TiO2纳米粉体和纳米膜材料在太阳能的存储与利用、光电转换、光致变色及光催化降解大气和水中的污染物等方面具有广泛的应用。为了提高其光催化活性和对…     

碘掺杂对纳米TiO2催化剂光催化活性的影响

用溶胶-凝胶法制得了碘掺杂纳米TiO2催化剂, 考察了诸因素对相结构的影响, 这对深入揭示I-TiO2光催化降解有机物的本质具有重要意义.     

掺钴氧化钛电极的制备、表征及其光电性能

采用溶胶-凝胶法在纯钛片上制备了掺Co氧化钛薄膜光电极,运用扫描电子显微镜(SEM)、 X射线衍射(XRD)等分析手段对其进行表征,并对其结构和性能的相互关系进行了研究.结果表明,掺5%Co, 500℃热处理的TiO2电极具有最大的可见光响应.过量的Co掺入将析出新相CoTiO3,并促使TiO2由锐钛矿型转变为金红石型,使电极光电效应减低.而高温处理的掺钴TiO2也将析出CoTiO3,对电极光电性能有阻碍作用.     

N掺杂纳米TiO2可见光催化氧化丙烯的动力学行为

通过在不同温度的氨气气氛中处理纳米管钛酸(NTA)制得具有可见光响应的氮掺杂纳米二氧化钛. X射线衍射(XRD)谱表征结果显示, 当温度高于400 ℃时, 样品由正交晶系向锐钛矿相转变, 700 ℃处理得到的样品除了锐钛矿相TiO2外还有TiN 新相存在; 紫外-可见扩散漫反射(DRS)结果表明, 氮掺杂纳米TiO2在整个可见光区都有明显的吸收. 不同波长可见光及不同气体流速的光催化氧化丙烯动力学研究表明, 活性最好的N掺杂纳米TiO2催化剂(600 ℃ NH3处理)对可见光的利用范围可扩展至500 nm, 低浓度丙烯光催化氧化反应为一级反应.     

Characterization and mechanism analysis of Mo-N-co-doped TiO2 nano-photocatalyst and its enhanced visible activity

In this study, Mo-N-co-doped TiO(2) nano-photocatalysts have been synthesized through hydrolysis-precipitation method, combined with sonication posttreatment. The resulting materials were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and UV-vis diffuse reflectance spectroscopy (UV-vis DRS). XRD showed that co-doping with Mo and N favored the formation of anatase and retarded the growth of crystallite size. XPS revealed that N was incorporated into the lattice of TiO(2) through substituting oxygen atoms and coexisted in the forms of β-N and γ-N in co-doped TiO(2). Meanwhile, Mo was also incorporated into the lattice of TiO(2) through substituting titanium atoms and existed in the form of Mo(6+). DRS indicated that the light absorbance in visible region was improved by co-doping with Mo and N, leading to a narrower band gap and higher visible light photocatalytic activity for the degradation of phenol than that of pure and N-doped TiO(2). The enhanced visible light photocatalytic activity of Mo-N-co-doped TiO(2) nano-photocatalyst was attributed to the small crystallite size, narrow band gap and intense light absorbance in visible region. This study provides a new method to synthesize visible light active TiO(2)-based photocatalyst.     

WO3-TiO2薄膜型复合光催化剂的制备和性能

 采用溶胶－凝胶法在多孔钛片上制备了WO3－TiO2薄膜型复合光催化剂,并用甲基橙的光催化降解反应对所得薄膜型催化剂的活性进行了评价．实验结果表明：x（W）＝0．5％,涂覆层数为3层,在500℃焙烧1h的WO3－TiO2薄膜型光催化剂的活性最高,比纯TiO2薄膜高出96．7％．此时多孔钛片上负载的TiO2以锐钛矿和金红石两种晶形存在,表明适量W的掺入可使TiO2的相转变温度显著降低．