Sol-Gel法制备La~(3+)改性的TiO_2纳米粉体

在常用的半导体光催化材料中,研究较多的有TiO2、ZnO、CdS等[1-3],其中TiO2因性能稳定、催化活性高、无毒、不产生二次污染和成本低廉等优点,在光催化降解污染物领域显示出优越的应用前景[3-6].     

"面包圈"状高有序度大孔径介孔分子筛SBA-15的合成

介孔材料因其高度有序的大孔径、较佳的催化吸附性能、良好的电磁性质及易于剪裁而引起人们极大的兴趣[1～9].人们已相继合成了介孔氧化硅薄膜[3,10]、球[12]、空心球[4,13]和纤维[12～15]等,并设法控制中孔材料晶体外貌[3～9,15～21].最近,我们报道了利用多相组装和无机晶体(如NaCl,LiCl)作大孔结构导向剂的方法[16],合成了人造"珊瑚"状介-大孔氧化硅膜[13].Lin等[17]用共表面活性剂法在丁醇存在下合成了多组有序结构的介孔氧化硅空心球; Shio等[21]在完全溶解的硅酸钠和阳离子表面活性剂溶液中,合成了细棒状介孔氧化硅粉末.本文报道一种控制介孔材料颗粒外貌和形状的新方法,即共溶剂法,并以此法合成了高有序度、大孔径、 "面包圈"状介孔氧化硅SBA-15.这种新材料有望在微加工、催化、生物分离、电子器件的矿化、色谱载体等方面得到应用[1～9].     

乙醇溶液中ZnO纳米粒子的形成机理研究

半导体纳米粒子的研究是当今材料科学及物理化学的热门课题[1－3]．由于纳米粒子具有极大的比表面、尺寸量子化效应及增强的氧化和还原能力等不同于扶林的特殊性质，它被广泛地用于光催化，光电材料的制备及非线性光学材料的研究等[4－6]．ZnO作为一种重要的半导体材料，其纳米粒子的制备近年来也有报导[7－14]．由于ZnO在水中的生成自由能较正，所以一般都在醇溶液中制备，但其具体的成核机理至今并不十分清楚．本工作通过仔细的研究，阐明了ZnO纳米粒子形成过程中的成核和生长机理．1实验部分醋酸锌，氢氧化钠和乙醇均为分析纯试剂．制…     

环氧丙烷在金属氧化物表面上吸附的IR研究

环氧丙烷(PO)是一种重要的化工原料,可用于合成多种特殊化学品及材料[1].其中在某些化学品合成过程中,经常以均相酸或碱作催化剂,例如在合成有机溶剂丙二醇醚的过程中就用到了矿物酸或苛性碱.虽然均相酸或碱作催化剂有活性高、选择性好等优点,但同时存在产物与催化剂分离、腐蚀和废液处理等多种弊端,因此在一些反应过程中人们正积极探求用符合要求的多相催化法来代替均相催化法.A l2O3、ZnO和MgO分别具有酸性、两性和碱性并已用于多种催化反应中[2,3],本文通过IR光谱法研究了环氧丙烷在MgO,A l2O3和ZnO上的吸附活化态.在这些氧化物中…     

LaMnO_3稀土纳米材料及催化性能

钙钛矿型复合氧化物（ ABO3）有稳定的结构和良好的高温性能,其中 La-Mn-O系列的钙钛矿材料具有很好的催化活性,但采用固相反应等方法制备的样品其比表面一般不超过 10 m2· g－ 1,反应活性受到限制 [1].纳米材料粒径较小,比表面较大,具有独特的物理化学性能,是一种有应用前景的新型催化材料 .目前,纳米材料的制备方法有喷雾冷冻干燥法 [2]、 共沉淀法 [3]或溶胶-凝胶法 [4－ 7]等 .本文用 NaOH-Na2CO3共沉淀法制备出纳米级 LaMnO3钙钛矿,并研究了其对 CO、 HC和 NO的催化性能 .1实验1.1样品制备　　纳米钙钛矿粉末制备方…     

电化学溶解钛金属直接水解法制备纳米TiO_2

纳米材料是目前材料科学的热点 .TiO2作为一种重要的无机功能材料 ,具有温敏、气敏、光催化等功能 ,广泛用于光电材料、涂料、传感器、介电材料、催化剂及载体等重要领域 .由于其各种应用都与粉体的性能有直接关系 ,因此研究纳米 TiO2的制备方法具有重要的实际意义 [1].近年来 ,纳米 TiO2粉体制备方法有了很大的发展 ,如 TiCl4气相水解沉淀法 [2],乳浊液法和 Ti(OC4H9)4水解沉淀法 [1],喷雾热解法 [3],放电爆炸法 [4],反应电极埋弧法 [5],溶胶凝胶 (Sol gel)法 [6]等 ,其中溶胶凝胶法是制备纳米材料的有效方法 .但这些方法存在…     

1,3-二烯基-1,1,3,3-四甲基二硅氧烷/苯乙烯共聚物的合成及其热性能

有机硅聚合物具有柔软、耐热、耐水、抗生物污染等优点,若在聚合物中引入其它官能团,可进一步改善其性能,扩大应用领域,如:气体分离膜[1,2]、耐紫外线及X-射线材料[3]、半导体材料[4]、药物载体[5]、液晶材料[6]、阻燃材料[7]等.特别是含硅烷基苯乙烯衍生物系列的聚合物,其膜适用于氧等气体的分离,近来出现许多研究报道[1,2,8,9].     

V含量对ZnO薄膜结构及光学特性的影响

0引言氧化锌是一种六角纤锌矿结构的直接宽带隙半导体,其室温下禁带宽度为3.37eV。它具有多种优良的物理性能,在声表面波[1,2]、透明电极[3,4]、光电材料[5]、蓝光器件[6]等方面都有较大的应用潜力。氧化锌价格低廉,不仅能制成良好的半导体和压电薄膜,亦能够制成良好的透明导电薄膜。理论计算表明[7],氧化锌掺杂V、Cr、Fe、Co、N i元素能够产生自旋极化,形成高于室温的稀磁性透明半导体,是下一代微电子和光电子领域自旋电子学器件有重要价值的材料之一。根据理论计算,V掺杂的ZnO膜具有最高的居里温度。V yatkin实验小组[8]用钒离子注入…     

利用室温固态反应制备球霰石型CaCO3粒子

合成形态、大小及结构可人为调控的无机材料是现代材料科学的重要研究方向[1]. 借助于各类有机添加剂及模板剂的调控作用, 可利用溶液合成方法制备出形貌与结构受到有效调控的无机粒子[2,3]. 室温固态化学反应已被成功地应用于多种无机纳米粒子[4]及纳米线[5]的合成, 并显示出高效、节能、无污染和操作简便等优点, 因而在材料合成领域具有应用前景[6].     

二氧化锰纳米棒的固相合成与表征

上世纪90年代以来,纳米科技向化学电源领域渗透,科技工作者开始研发纳米级MnO2电极材料,主要包括MnO2纳米粉体的制备[1-8]和将其作为碱锰电池正极材料[1-3]、高能量密度锂电池正极材料以及超级电容器电极材料的性能研究[4-8].     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.