反相微乳液化学剪裁制备明胶-γ-Fe2O3纳米复合微粒

用反相微乳液化学剪裁技术制备了明胶包裹的复合 γ-Fe2 O3纳米量级超细微粒 .XRD、TEM、EDS、SEM和 IR测试表明 ,微粒为明胶包裹球形超细微粒 .微球的粒径为 1 .2～ 3 .2 μm,平均粒径约 2 .6μm,而微粒的粒径为 1 5 nm.每个复合微球中约有 80～ 2 1 3个氧化铁粒子 .该复合微粒的比饱和磁化强度 3 0 .3 44π ×1 0 3A/ m,矫顽力 Hc=62 0 7A/ m,剩磁 Br=2 .944π × 1 0 3A/ m.具有硬磁体的性质     

FeOOH明胶复合纳米粒子的制备与表征

采用两步法制备具有弱磁性的FeOOH纳米粒子和FeOOH明胶复合纳米粒子. 透射电镜、扫描电镜、红外光谱、X射线衍射和磁滞回线等测量结果表明: 在一定FeCl₃/Fe₂(SO₄)₃/H₂O摩尔比条件下, 加入十二烷基苯磺酸钠(ABS)溶液, 可制备粒径为30～150 nm弱磁性FeOOH纳米粒子, 其磁性可达6.5×10^－6 emu/g. 弱磁性FeOOH纳米粒子可被明胶包裹. 随着FeCl₃/Fe₂(SO₄)₃摩尔比减小或明胶浓度增加, 纳米球粒径增大, 磁性降低. 随着固化时间增加, FeOOH明胶复合纳米粒子的粒径先增大后减小.     

微乳液聚合制备聚 N-异丙基丙烯酰胺温敏超细微粒

通过微乳液聚合制备了未交联及交联的聚N 异丙基丙烯酰胺 (L PNIPAM及CL PNIPAM)超细微粒 .CL PNIPAM的聚合动力学方程为 :Rp=k[M]1 1 6 [E]- 1 2 0 [I]0 5 3.测得其平均微粒粒径约 10 0nm .用SEM ,迎头色谱法测得交联的CL PNIPAM超细微粒的内比表面积为 49 0 48m2 g ,孔径大小为 1～ 10nm .气体吸附量为1784 8cm3 g .用浊度法及目视法研究了其在水介质中的温敏特性 ,测得其相变温度为 31 5℃     

乙烷部分氧化超细Fe－Mo－O催化剂的研究

采用溶胶-凝胶法制备了Fe－Mo－O催化剂，用XRD、TEM、BET、IR、TPR、TPD和微反等技术研究了催化剂晶体结构、表面构造、晶格氧活泼性、化学吸附和乙烷部分氧化反应性能。Fe－Mo－O复合氧化物催化剂是由超细微粒组成，微粒粒径约10 nm～20 nm，比表面积为48.1 m2/g。催化剂表面由Lewis碱位（Mo=O键的端氧和Fe－O－Mo键中的桥氧）及Lewis酸位构成。乙烷能以甲基中的H原子吸附在催化剂表面Lewis碱位Mo=O的端氧上形成分子吸附态，其部分氧化产物主要是C2H4和少量的CH3CHO。     

高Fe_3O_4含量单分散P(St/AA)复合微球的合成与表征

在表面由十一烯酸和油酸共同修饰的Fe3O4磁流体存在下,以苯乙烯(St)和丙烯酸(AA)为共聚单体,用细乳液聚合法,制备了单分散,高Fe3O4含量,且表面带有羧基的超顺磁性高分子复合微球.采用透射电镜(TEM),热重分析(TGA),物性测量系统(PPMS),Zeta电位以及红外光谱等手段对磁性复合微球的各项性能进行表征.结果表明,Fe3O4粒子的表面改性是影响复合微球Fe3O4含量及形貌的关键因素.在优化的实验条件下,可以制得Fe3O4含量高达77wt%,平均粒径为137·9nm,表面羧基密度0·0894mmol/g,比饱和磁化强度为44·7emu/g的单分散超顺磁性高分子复合微球.     

超顺磁性高分子微球的制备与表征

用化学共沉淀方法制备了Fe3O4纳米微粒,并用油酸(十八烯酸)和十二烷基苯磺酸钠为双层表面活性剂进行表面修饰,制备了稳定的水分散性纳米Fe3O4可聚合磁流体.在Fe3O4磁流体存在下,将苯乙烯与甲基丙烯酸通过乳液聚合方法制备了磁性高分子微球.透射电镜研究表明,Fe3O4微粒的平均粒径在10nm左右,乳液聚合形成的磁性高分子微球的粒径平均约为130nm;用超导量子干涉仪对微粒及高分子微球进行了磁性表征,结果表明,合成的Fe3O4纳米微粒以及磁性高分子微球均具有超顺磁性.同时,还用红外光谱及X射线衍射表征了磁性高分子微球的化学成分和晶体结构.用热失重方法测得磁性高分子微球中磁性物质的含量为23.6%.     

黄色硫化镉纳米粒子的共振瑞利散射光谱研究

在高分子聚乙烯醇存在下 ,Cd2 + 与S2 - 反应生成黄色CdS纳米微粒。当CdS浓度小于 5× 1 0 - 4 mol L时 ,它在 4 70nm产生一个最强RRS峰 ,这是由低浓度较小粒径黄色CdS纳米微粒或黄色CdS分子与光源相互作用的结果 ;当CdS浓度大于 7.5× 1 0 - 4 mol L时 ,在 5 2 0nm产生一个最强的特征RRS峰。黄色CdS纳米微粒体系在可见光区无吸收峰。当CdS纳米微粒的浓度在 7.5× 1 0 - 4 ～ 2 .0× 1 0 - 3mol L范围内 ,所得纳米粒子的粒径为 4 3nm。实验表明 :光源发射强度分布和CdS纳米粒子的形成是产生其RRS光谱峰的主要原因     

[Co(Phen)2(H2O)2](HL)NO3·3H2O的合成及晶体结构

在水溶液中,以邻菲咯啉、丁二酸与硝酸钴为原料合成了一个新的超分子化合物[Co(Phen)2(H2O)2].(HL).(NO3).3H2O,并经元素分析、IR、X射线单晶衍射分析进行了结构表征.结构分析表明,晶体属三斜晶系,P1-空间群,a=0.968 0(2)nm,b=1.370(3)nm,c=1.394 9(3)nm,α=61.714(3)°,β=71.495(4)°,γ=79.575(4)°,V=1.543 7 nm3,Z=2,ρ=1.481 g/cm3,C28H31CoN5O12,Mr=688.51,F(000)=714 andμ=0.627 mm-1,7 754个独立衍射点中,5 428个可观察点满足I≥2σ(I),R1=0.074 5,wR2=0.210 7.晶体中[Co(Phen)2(H2O)2]2+通过π-π相互作用堆积成二维层状结构,层间通过氢键作用构成三维超分子.     

三维网状结构聚金属氧酸盐K4SiW12O40·16H2O的合成及其X射线晶体结构分析

以钨酸钠(Na2WO4·2H2O),硅酸钠(Na2SiO3·9H2O)和氯化钾(KCl)为原料在水溶液中反应制得了标题化合物,单晶X射线结构分析表明,属单斜晶系,空间群Cc,晶胞参数a=2.0180(4),b=2.0178(4),c=1.2498(3)nm,β=90.08(3)°,V=5.0892(18)nm3,Z=4,Dc=4.290g/cm3.对5850个独立的衍射点[I>2σ(I)]进行全矩阵最小二乘法修正后,可靠性因子R1=0.0598.     

反相微乳液化学剪裁制备明胶-γ-Fe2O3纳米复合微粒

复合纳米微粒;反相微乳液化学剪裁制备明胶-γ-Fe2O3纳米复合微粒     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.     

Synthesis of N-substituted carbazolones from α-iodo enaminones via Pd(0)-catalyzed intramolecular coupling under microwave irradiation

A variety of N-aryl and N-alkyl carbazolones were conveniently achieved in good to high yields via Pd₂(dba)₃-mediated intramolecular coupling of N-substituted α-iodo enaminones under microwave irradiation. The Pd(0)-catalyzed cyclization was found to proceed favorably with the more electron-deficient phenyl ring during the reactions involving unsymmetrical N,N-diaryl α-iodo enaminones. This unique property enables the construction of carbazolone skeleton containing nitro substituted benzenoid ring.     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles by intramolecular nitrilimine cycloaddition

Both substituted 2,4,5,6-tetrahydrocyclopenta[c]pyrazoles and 2,4,5,6-tetrahydropyrrolo[3,4-c]pyrazoles have been synthesized by the 3+2 intramolecular dipolar cycloaddition of nitrilimines to alkynes. This cyclization has been extended to more versatile 3-bromo derivatives by the use of alkynylbromides as dipolarophiles.