Simultaneous Voltammetry Determination of Dihydroxybenzene Isomers by Nanogold Modified Electrode

A convenient electrochemical deposition method to prepare nanogold/glassy carbon modified electrode (nano‐Au/GCE) is adopted. In 0.1 mol/L HAc‐NaAc buffer solution (pH 4.61), the nano‐Au/GCE shows an excellent electrocatalytical behavior for the redox of dihydroxybenzene. A simple, rapid and highly selective voltammetry for simultaneous determination of dihydroxybenzene isomers, hydroquinone, catechol, and resorcinol, is developed using the nano‐Au/GCE. This method has been applied to the direct determination of the three dihydroxybenzene isomers in artificial wastewater.     

Simultaneous Determination of Dihydroxybenzene Isomers at MWCNTs/β‐Cyclodextrin Modified Carbon Ionic Liquid Electrode in the Presence of Cetylpyridinium Bromide

Simultaneous determination of dihydroxybenzene isomers was investigated at a multi‐wall carbon nanotubes (MWCNTs)/β‐cyclodextrin composite modified carbon ionic liquid electrode in phosphate buffer solution (pH 7.0, 1/15 mol/L) in the presence of cationic surfactant cetylpyridinium bromide (CPB). With the great enhancement of surfactant CPB, the voltammetric responses of dihydroxybenzene isomers were more sensitive and selective. The oxidation peak potential of hydroquinone was about 0.024 V, catechol was about 0.140 V and resorcinol 0.520 V in differential pulse voltammetric (DPV) measurements, which indicated that the dihydroxybenzene isomers could be separated entirely. The electrode showed wide linear behaviors in the range of 1.2×10^?7–2.2×10^?3, 7.0×10^?7–1.0×10^?3, 2.6×10^?6–9.0×10^?4 mol/L for hydroquinone, catechol and resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 4.0×10^?8, 8.0×10^?8, 9.0×10^?7 mol/L, respectively. The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater, and the recovery was from 97.4% to 104.2%.     

Simultaneous Determination of Dihydroxybenzene Isomers Using Preanodized Inlaying Ultrathin Carbon Paste Electrode

In this paper, we described a rapid, sensitive and selective method for simultaneous voltammetric determination of dihydroxybenzene isomers with a preanodized inlaying ultrathin carbon paste electrode (PAIUCPE). Scanning electron microscope (SEM), electrochemical impedance spectroscopy (EIS) and voltammetry were employed to characterize the configuration and electrochemical properties of the electrode. The resulting PAIUCPE exhibited excellent recognition ability towards dihydroxybenzene isomers. Three well‐defined oxidation peaks of catechol (CC), resorcinol (RC) and hydroquinone (HQ) can be identified entirely at the electrode. The oxidation peak potential difference between HQ and CC was 120 mV, CC and RC 430 mV, respectively. The peak currents increased linearly with increasing the concentration of dihydroxybenzene isomers. The proposed electrode can be applied to simultaneous determination of dihydroxybenzene isomers without previous chemical or physical separations.     

Study on Diffusion Mechanisms and Determination of Dihydroxybenzene Isomers at the Pre‐anodized Inlaying Ultrathin Carbon Paste Electrode

In this paper, nichrome was adopted as a substrate, to fabricate the pre‐anodized inlaying ultrathin carbon paste electrode (PAIUCPE). The electrochemical behaviors and diffusion mechanisms of three dihydroxybenzene isomers at the electrode were carefully investigated. The effect of pH on oxidation peak current was also detailedly explained. The results were shown that oxidation peak current not only related to the reaction of electroactive materials at the working electrode, but also depended on the reaction variable of reduction at the auxiliary electrode. The oxidation peaks of hydroquinone (HQ), catechol (CC) and resorcinol (RC) located at 0.181 V, 0.288 V and 0.736 V. For CC, RC and HQ, the oxidation peak currents were linear to the concentrations at the range of 5.0 × 10^?6～5.0 × 10^?4 mol/L, 3.0 × 10^?6～5.0 × 10^?4 mol/L and 4.0 × 10^?6～4.0 × 10^?4 mol/L with the detection limits of 2.0 × 10^?7 mol/L, 1.2 × 10^?7 mol/L and 1.2 × 10^?7 mol/L, respectively. The proposed method was successfully applied in the simultaneous determination of dihydroxybenzene isomers in artificial sewage samples with satisfactory results.     

Selective,Nanomolar Electrochemical Determination of Environmental Contaminants Dihydroxybenzene Isomers Found in Water Bodies Using Nanocrystalline Zeolite Modified Carbon Paste Electrodes

Nanocrystalline zeolites of different framework structures were prepared by the addition of suitable structure directing agents in the synthesis composition of conventional zeolites. Zeolite modified carbon paste electrodes were constructed for the simultaneous determination of dihydroxybenzene isomers. Nanocrystalline zeolite Beta modified carbon paste electrode exhibited the highest electrocatalytic activity. Under optimum conditions, wide linear range was obtained from 150 nM to 400 µM with lower detection limit of 100, 130, and 100 nM for hydroquinone, catechol, and resorcinol, respectively. The analytical performance of the proposed sensor was demonstrated in the simultaneous determination of dihydroxybenzene isomers in different environmental water samples.     

Sensitive and Facile Determination of Catechol and Hydroquinone Simultaneously Under Coexistence of Resorcinol with a Zn/Al Layered Double Hydroxide Film Modified Glassy Carbon Electrode

A stable dihydroxybenzene sensor was fabricated by electrochemical deposition of Zn/Al layered double hydroxide film on glassy carbon electrode (LDHf/GCE). The sensitive and facile electrochemical method for the simultaneous determination of catechol (CA) and hydroquinone (HQ) under coexistence of resorcinol (RE) has been achieved at the LDHf/GCE in phosphate buffer solution (pH 6.5). Under the optimized conditions, the differential pulse voltammetry response of the modified electrode to CA (or HQ) shows a linear concentration range of 0.6 μM to 6.0 mM (or 3.2 μM to 2.4 mM) with a correlation coefficient of 0.9987 (or 0.9992) and the calculated limit of detection is 0.1 μM (or 1.0 μM) at a signal‐to‐noise ratio of 3. In the presence of 50 μM isomer, the linear concentration ranges for CA and HQ are 3.0 μM to 1.5 mM and 12.0 μM to 0.8 mM, respectively. The detection limits are 1.2 μM and 9.0 μM. Further, the proposed method has been performed to successfully detect dihydroxybenzene isomers in analysis of real samples, such as water and tea.     

A Novel Electrochemical Sensor for Simultaneous Determination of Hydroquinone,Catechol, and Resorcinol Using a Carbon Paste Electrode Modified by Zn-MOF,Nitrogen-doped Graphite,and AuNPs

In this work, the carbon paste electrode was modified with a composite of a metal-organic framework, nitrogen-doped graphite, and gold nanoparticles and used as an electrochemical sensor for dihydroxybenzene isomers. The morphology and characteristics of the modifiers were found by SEM and FT-IR. Electrochemical techniques showed the specific surface of the electrode to be significantly enhanced. The outcome achieved shows that this novel sensor displays an excellent electro-catalytic activity towards the oxidation of these isomers. The sensor was applied to the simultaneous determination of each three isomers using DPV with a linear response in the concentration range of 5–10⁵ nM.     

Simple sensor for simultaneous determination of dihydroxybenzene isomers

A simple sensor based on bare carbon ionic liquid electrode was fabricated for simultaneous determination of dihydroxybenzene isomers in 0.1 mol L⁻¹ phosphate buffer solution (pH 6.0). The oxidation peak potential of hydroquinone was about 0.136 V, catechol was about 0.240 V, and resorcinol 0.632 V by differential pulse voltammetric measurements, which indicated that the dihydroxybenzene isomers could be separated absolutely. The sensor showed wide linear behaviors in the range of 5.0 × 10⁻⁷–2.0 × 10⁻⁴ mol L⁻¹ for hydroquinone and catechol, 3.5 × 10⁻⁶–1.535 × 10⁻⁴ mol L⁻¹ for resorcinol, respectively. And the detection limits of the three dihydroxybenzene isomers were 5.0 × 10⁻⁸, 2.0 × 10⁻⁷, 5.0 × 10⁻⁷ mol L⁻¹, respectively (S/N = 3). The proposed method could be applied to the determination of dihydroxybenzene isomers in artificial wastewater and the recovery was from 93.9% to 104.6%.     

Simultaneous determination of catechol and hydroquinone based on poly (diallyldimethylammonium chloride) functionalized graphene-modified glassy carbon electrode

Simultaneous determination of catechol (CC) and hydroquinone (HQ) were investigated by voltammetry based on glassy carbon electrode (GCE) modified by poly (diallyldimethylammonium chloride) (PDDA) functionalized graphene (PDDA-G). The modified electrode showed excellent sensitivity and selectivity properties for the two dihydroxybenzene isomers. In 0.1 mol/L phosphate buffer solution (PBS, pH 7.0), the oxidation peak potential difference between CC and HQ was 108 mV, and the peaks on the PDDA-G/GCE were three times as high as the ones on graphene-modified glass carbon electrode. Under optimized conditions, the PDDA-G/GCE showed wide linear behaviors in the range of 1 × 10⁻⁶−4 × 10⁻⁴ mol/L for CC and 1 × 10⁻⁶−5 × 10⁻⁴ mol/L for HQ, with the detection limits 2.0 × 10⁻⁷ mol/L for CC and 2.5 × 10⁻⁷ mol/L for HQ (S/N = 3) in mixture, respectively. Some kinetic parameters, such as the electron transfer number (n), charge transfer coefficient (α), and the apparent heterogeneous electron transfer rate constant (k _s), were calculated. The proposed method was applied to simultaneous determine CC and HQ in real water samples of Yellow River with satisfactory results.     

Electrochemical behavior of dihydroxybenzene isomers at MWCNTs modified electrode and simultaneous determination in neutral condition

Simultaneous determination of dihydroxybenzene isomers in neutral condition was successfully realized by a simple and easy prepared modified electrode without previous chemical or physical separations. The multi-walled carbon nanotubes modified glassy carbon electrode (MWCNTs/GCE), which was prepared by the drop-coating method, was characterized by FE-SEM and TEM. Then, the electrochemical behavior of dihydroxybenzene isomers at MWCNTs/GCE was systematically studied at different temperature and pH conditions. The oxidation peak potentials were separated in neutral condition with 105 mV to hydroquinone (HQ) and catechol (CC) and 390 mV to CC and resorcinol (RS). And in neutral condition, the amperometric current were found to be linear with concentration of HQ, CC, and RS (20–140 μM) with the presence of 100 μM other isomers. Furthermore, excellent anti-interference, stability, and reproducibility were also presented by this modified electrode.     

Selective determination of hydroquinone in the presence of catechol based on over-oxidized poly(hydroquinone)

Selective determination of hydroquinone (HQ) in the presence of catechol (CC) was developed at an over-oxidized poly(hydroquinone) (PHQ) electrode. The electrochemical polymerization of HQ was carried out by potentiostatic method on a glassy carbon electrode. The resulting PHQ was over-oxidized in 0.10?mol/L NaOH solution and thus poly(p-benzoquinone) was obtained. Two dihydroxybenzene isomers, HQ and CC, show different voltammetric behavior at the over-oxidized PHQ electrode. The peak current of HQ is much larger than that of CC with the same concentration, which is attributed to the different position of the hydroxyl groups in benzene ring of the two isomers. The results from electrochemical impedance spectroscopy also demonstrates that the over-oxidized PHQ electrode has a stronger affinity for HQ over CC.     

纳米Fe_2O_3修饰涂碳型硫酸沙丁胺醇选择电极的研制与应用

制备了以纳米Fe_2O_3为修饰剂的涂碳型硫酸沙丁胺醇选择电极,采用电位分析方法对其各项性能进行测定。结果表明,该纳米Fe_2O_3修饰电极有很好的能斯特响应,其线性范围为1.0×10~(-6)~0.1 mol/L,级差电位为59 mV/pC,与普通电极相比,响应时间较短(10 s),检出限更低(2.8×10~(-7)mol/L)。将修饰电极应用于猪肉样品中硫酸沙丁胺醇含量的测定,结果与标准方法结果相符。     

Covalent modification of glassy carbon electrode with aspartic acid for simultaneous determination of hydroquinone and catechol

Glassy carbon electrode (GCE) is covalently modified with aspartic acid (Asp). The modified electrode is used for the simultaneous electrochemical determination of hydroquinone (HQ) and catechol (CC) and shows an excellent electrocatalytical effect on the oxidation of HQ and CC by cyclic voltammetry (CV) in 0.1 mol/L acetate buffer solution (pH 4.5). In differential pulse voltammetric (DPV) measurements, the modified electrode could separate the oxidation peak potentials of HQ and CC present in binary mixtures by about 101 mV though the bare electrode gave a single broad response. A successful elimination of the fouling effect by the oxidized product of HQ on the response of CC has been achieved at the modified electrode. The determination limit of HQ in the presence of 0.1 mmol/L CC was 9.0 x 10(-7) mol/L and the determination limit of CC in the presence of 0.1 mmol/L HQ was 5.0 x 10(-7) mol/L. The proposed method has been applied to the simultaneous determination of HQ and CC in a water sample with simplicity and high selectivity.     

以3,4-二羟基肉桂酸为介质的多壁碳纳米管糊电极用于检测药物和尿液样品中的谷胱甘肽(英文)

A sensitive and selective electrochemical sensor for the determination of glutathione(GSH) was developed using a modified multiwall carbon nanotube paste electrode with 3,4 dihydroxy cinnamic acid as a mediator.This modified electrode showed very high electrocatalytic activity for the anodic oxidation of GSH.Under the optimized conditions,the electrocatalytic peak current showed a linear relationship with GSH concentration in the range of 0.5-400.0 μmol/L with a detection limit of 0.1 μmol/L GSH.The relative standard deviations for seven successive assays of 5.0 and 25.0 μmol/L GSH were 2.2% and 2.7%,respectively.The modified electrode was used for the determination of GSH compounds in real urine samples.     

钯/聚苯胺纳米多层膜的制备及对抗坏血酸和多巴胺的催化氧化

采用脉冲电位法(PPSM)结合聚苯胺(PANI)的层层自组装制备了Pd/PANI交替沉积纳米多层膜, 并用于抗坏血酸(AA)和多巴胺(DA)的检测. 实验发现, 多层膜结构形貌及催化性能受前躯体K₂PdCl₆浓度、 脉冲条件及膜厚度等影响. 当K₂PdCl₆浓度为2×10^-3 mol/L, 阴极脉冲电位为-0.3 V, 阶跃次数为17时, 5层Pd/PANI修饰玻碳电极对AA和DA的催化性能最佳; 在0.1 mol/L磷酸盐缓冲液中, AA和DA的氧化峰明显分离[ΔE_p(AA, DA)=160 mV], 其峰电流与浓度分别在5×10^-5～4×10^-4和4×10^-5～1×10^-4 mol/L范围内呈较好线性关系, 实现了对AA和DA的同时测定. 该修饰电极具有良好的抗干扰性和稳定性.     

高效液相色谱-喷壁/薄层安培检测器用于同时测定5种环境优先污染酚

结合传统的喷壁式和薄层式安培检测器,制备了一种新型的喷壁/薄层安培检测器。 联合高效液相色谱（HPLC）同时对5种环境优先污染酚进行了检测。 实验发现,安培检测工作电极面积的增大会导致响应电流的增大,但同时也会增大噪声,因此,基于信噪比优化电极面积是重要的。 选用色谱柱SHIM-PACK VP-ODS（150 mm×4.6 mm）,流动相V（甲醇）∶V（0.1 mol/L PBS,pH=7.5）=40∶60,柱温40 ℃,流速1 mL/min,进样量20 μL,安培检测电位为1.0 V,紫外检测波长为220 nm,喷壁-薄层安培检测器不经富集对对硝基酚、苯酚、间甲酚、2,4-二氯苯酚和2,4,6-三氯苯酚共5种酚类物质的检测下限均低于1 μg/L(S/N=3),优于相同条件下的紫外检测器和商品电化学检测器。 用于实际水样分析亦获满意结果。     

基于分子印迹聚合物掺杂氧化石墨烯膜的利巴韦林电位传感器

以利巴韦林为模板分子,甲基丙烯酸为功能单体,采用沉淀聚合法制备利巴韦林分子印迹聚合物(MIP).以利巴韦林分子印迹聚合物掺杂氧化石墨烯(GO)为离子载体,聚氯乙烯为基质,癸二酸二辛酯为增塑剂制备电极敏感膜.结果表明,敏感膜组成为100.8 mg MIP、14.7 mg GO、450.8 mg聚氯乙烯和901.6 mg癸二酸二辛酯,内充液组成为0.1 mol/L NaCl+0.05 mol/L NaAc-0.05 mol/L HAc缓冲溶液+ 1.0×10.-5 mol/L利巴韦林,电极的响应性能最好.此电极的能斯特响应斜率为45.565 mV/decade,线性范围为1.0×10.-6~1.0×10.-4 mol/L, 检出限为1.0×10.-7 mol/L(S/N=3),工作pH范围为3~5,响应时间小于3 min.此电极对利巴韦林具有高选择性,可用于检测饲料和注射液中利巴韦林含量,加标回收率为90%~110%,RSD为3.0%~7.9%.     

Application of diazo-thiourea and gold nano-particles in the design of a highly sensitive and selective DNA biosensor

An effective procedure for constructing a DNA biosensor is developed based on covalent immobilization of NH_2 labeled,single strand DNA(NH_2-ssDNA) onto a self-assembled diazo-thiourea and gold nanoparticles modified Au electrode(diazo-thiourea/GNM/Au).Gold nano-particles expand the electrode surface area and increase the amount of immobilized thiourea and single stranded DNA(ssDNA) onto the electrode surface.Diazo-thiourea film provides a surface with high conductibility for electron transfer and a bed for the covalent coupling of NH_2-ssDNA onto the electrode surface.The immobilization and hybridization of the probe DNA on the modified electrode is studied by differential pulse voltammetry(DPV) using methylene blue(MB) as a well-known electrochemical hybridization indicator.The linear range for the determination of complementary target ssDNA is from 9.5(±0.1) × 10~(-13) mol/L to1.2(±0.2) x 10~(-9) mol/L with a detection limit of 1.2(±0.1) 10~(-13) mol/L.     

超高效液相色谱-串联质谱法同时测定中成药和保健品中9种抗抑郁药物

建立了同时测定中成药和保健品中9种抗抑郁药物的超高效液相色谱-串联质谱（UPLC-MS/MS）分析方法。以甲醇为提取溶剂,超声提取,离心后取上清液,使用Waters ACQUITY UPLC BEH C₁₈色谱柱（100 mm×2.1 mm,1.7 μm）进行分离,以乙腈和0.1%（v/v）甲酸水为流动相对目标物进行梯度洗脱。在电喷雾正离子模式下,采用多反应监测（MRM）模式进行定性和定量分析。结果表明,9种抗抑郁药物在0.04~20 μg/L范围内线性关系良好,线性相关系数（R²）均大于0.998;目标物的检出限为0.0068~0.034 μg/L;在0.5、1、5 μg/L 3个添加水平下的平均回收率为77.7%~100.8%,相对标准偏差为0.9%~9.1%。本方法准确、简便、快速,可用于中成药和保健品中抗抑郁药物的检测。     

柱后衍生高效液相色谱法测定虾中14种磺胺类药物残留量

建立了虾中14种磺胺类药物残留量的柱后衍生高效液相色谱检测方法。样品在加入内标物磺胺吡啶后用乙酸乙酯提取,提取液浓缩后用4 mL乙酸乙酯溶解残余物,用盐酸溶液反萃取,正己烷去脂,盐酸溶液经滤膜过滤后,加入乙腈、甲醇和3.5 mol/L乙酸钠溶液（体积比为5：5：20）的混合溶液混匀后,经高效液相色谱分离,用荧光胺衍生试剂进行柱后衍生,荧光检测器检测。采用基质标样添加法绘制标准曲线,内标法定量。对柱后衍生系统参数进行了优化,确定了荧光胺溶液的浓度、流速和反应温度分别为0.2 g/L、0.15 mL/min和50℃。14种磺胺类药物在5~200 μg/L范围内具有良好的线性。磺胺类药物的定量限（LOQ,S/N=10）为1.0~5.0 μg/kg。在1.0~100.0 μg/kg添加水平内,磺胺类药物的平均回收率为77.8%~103.6%,相对标准偏差（RSD）为2.9%~9.1%（n=6）。实验结果表明该方法灵敏、准确,重复性好,适用于虾中磺胺类药物的残留检测。