Doped Nano‐Sized Copper(I) Oxide (Cu2O) on Melamine?Formaldehyde Resin: a Highly Efficient Heterogeneous Nano Catalyst for ‘Click’ Synthesis of Some Novel 1H‐1,2,3‐Triazole Derivatives Having Antibacterial Activity

A facile and simple protocol for the 1,3‐dipolar cycloaddition of organic azides with terminal alkynes catalyzed by doped nano‐sized Cu₂O on melamine? formaldehyde resin (nano‐Cu₂O? MFR) as a new and convenient heterogeneous catalyst is described. In this method, ‘click’ cycloaddition of various structurally diverse β‐azido alcohols and alkynes in the presence of nano‐Cu₂O? MFR in H₂O/THF 1 : 2 furnished the corresponding 1,4‐disubstituted 1H‐1,2,3‐triazole adducts 1a – 1o in good to excellent yields at room temperature (Scheme and Table 3). The nano‐Cu₂O? MFR was characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD), inductively coupled plasma (ICP) analysis, and FT‐IR. The nano‐Cu₂O? MFR could be easily recovered and recycled from the reaction mixture and reused for many consecutive trials without significant decrease in activity (Table 4). The in vitro antibacterial activities of all synthesized compounds were tested on several Gram‐positive and/or Gram‐negative bacteria (Table 5). The results demonstrate the promising antibacterial activity for some of the synthesized compounds.     

Investigation of a mutual interaction force at different pressure amplitudes in sulfuric acid

This paper investigates the secondary Bjerknes force for two oscillating bubbles in various pressure amplitudes in a concentration of 95% sulfuric acid.The equilibrium radii of the bubbles are assumed to be smaller than 10 μm at a frequency of 37 kHz in various strong driving acoustical fields around 2.0 bars (1 bar=10 5 Pa).The secondary Bjerknes force is investigated in uncoupled and coupled states between the bubbles,with regard to the quasi-adiabatic model for the bubble interior.It finds that the value of the secondary Bjerknes force depends on the driven pressure of sulfuric acid and its amount would be increased by liquid pressure amplitude enhancement.The results show that the repulsion area of the interaction force would be increased by increasing the driven pressure because of nonlinear oscillation of bubbles.     

Enhancement of Kerr nonlinearity at long wavelength in a quantum dot nanostructure

The giant Kerr nonlinearity with reduced linear and nonlinear absorption in a four-level quantum dot by employing the tunnel coupling is investigated. It is shown that by enhancement of tunnel coupling value the Kerr nonlinearity increases and at the same time linear and nonlinear absorption reduces at the long wavelength which is very important for communicational applications. Enhanced of Kerr nonlinearity in a double quantum dots is investigated. It is found that the electron tunneling has an essential role to reducing the linear absorption and increasing the Kerr nonlinearity at long wavelength.     

Controlled release of ketorolac through nanocomposite films of hydrogel and LDH nanoparticles

A novel nanocomposite film for sustained release of anionic ophthalmic drugs through a double-control process has been examined in this study. The film, made as a drug-loaded contact lens, consists principally of a polymer hydrogel of 2-hydroxyethyl methacrylate (HEMA), in whose matrix MgAl-layered double hydroxide (MgAl-LDH) nanoparticles intercalated with the anionic drug are well dispersed. Such nanocomposite films (hydrogel-LDH-drug) contained 0.6–0.8 mg of MgAl-LDH and 0.08–0.09 mg of the ophthalmic drug (ketorolac) in 1.0 g of hydrogel. MgAl-drug-LDH nanoparticles were prepared with the hydrodynamic particle size of 40–200 nm. TEM images show that these nanoparticles are evenly dispersed in the hydrogel matrix. In vitro release tests of hydrogel-LDH-drug in pH 7.4 PBS solution at 32 °C indicate a sustained release profile of the loaded drug for 1 week. The drug release undergoes a rapid initial burst and then a monotonically decreasing rate up to 168 h. The initial burst release is determined by the film thickness and the polymerization conditions, but the following release rate is very similar, with the effective diffusion coefficient being nearly constant (3.0 × 10⁻¹² m²/s). The drug release from the films is mechanistically attributed to anionic exchange and the subsequent diffusion in the hydrogel matrix.     

Relativistic Oscillators in a Noncommutative Space and in a Magnetic Field

In this work, we study the relativistic oscillators in a noncommutative space and in a magnetic field. It is shown that the effect of the magnetic field may compete withthat of the noncommutative space and that is able to vanish the effect of the noncommutative space.     

Monitoring of Methyldopa by Fast Fourier Transform Continuous Cyclic Voltammetry at Gold Microelectrode

A continuous cyclic voltammetric study of methyldopa at gold micro electrode was carried out. The drug in phosphate buffer (pH 2.0) is adsorpted at 400 mV, giving rise to change in the current of well-defined oxidation peak of gold in the flow injection system. The proposed detection method has some of advantages, the greatest one of which are as follows: first, it is no more necessary to remove oxygen from the analyte solution and second, this is a very fast and appropriate technique for determination of the drug compound in a wide variety of chromatographic analysis methods. Signal-to-noise ratio has significantly increased by application of discrete Fast Fourier transform (FFT) method, background subtraction and two-dimensional integration of the electrode response over a selected potential range and time window. Also in this work some parameters such as sweep rate, eluent pH, and accumulation time and potential were optimized. The linear concentration range was of 1.0×10－7—1.0×10－11 mol•L－1 (r＝0.9975) with a limit of detection and quantitation 0.004 nmol•L－1 and 0.03 nmol•L－1, respectively. The method has the requisite accuracy, sensitivity, precision and selectivity to assay methyldopa in tablets. The influences of pH of eluent, accumulation potential, sweep rate, and accumulation time on the determination of the methyldopa were considered.     

Electrochemical synthesis and characterization of solid-phase microextraction fibers using conductive polymers: application in extraction of benzaldehyde from aqueous solution

In this work, polyaniline, polypyrrole, and polyaniline/polypyrrole composite fibers were synthesized in the absence and presence of oxidized multiwalled carbon nanotubes using electrochemical cyclic voltammetry with CF₃COOH as dopant. Thermal stability of these fibers was studied by differential scanning calorimetry. Then, headspace solid-phase microextraction process coupled with gas chromatography and flame ionization detector was used for comparing extraction capability of benzaldehyde from aqueous solution. Since polyaniline fiber showed better extraction efficiency than the other fibers, its preparation conditions including acid concentration, aniline concentration, scan rate, and amount of multiwalled carbon nanotubes were studied by means of the “one-factor-at-a-time method”. The analytical performance of polyaniline fibers were investigated to determine benzaldehyde from the aqueous solution. The morphology and texture of polyaniline fibers were examined by field emission scanning electron microscopy and Fourier transform infrared spectroscopy analyses. The attained results revealed that the perfect conditions for acid concentration, aniline concentration, scan rate, and multiwalled carbon nanotubes content were 0.5 M, 0.2 M, 25 mV s^?1, and 0.02 wt%, respectively. The limit of detection for the proposed polyaniline fiber was 15 ng ml^?1.     

Synthesis, characterization and properties of novel thermally stable poly(urethane-oxazolidone) elastomers

Oxazolidone-incorporated polyurethane elastomers based on hydroxyl terminated polycaprolactone, were synthesized and characterized. Reaction of epoxy-terminated polyurethane with isocyanate librated from a blocked polyisocyanate was the strategy followed. The reaction condition was optimized through preparation of model oxazolidones. Epoxy-terminated polyurethanes were prepared from reaction of glycidol with NCO-terminated polyurethane prepolymers and curing agent was synthesized from the reaction of trimethylol propane, toluene diisocyanate and N-methyl-aniline. Incorporation of heterocyclic oxazolidone groups into the polyurethane backbone caused improvements in thermal and mechanical properties. Investigation of structure-property relationship for prepared elastomers showed that the main determining factors for observed properties were crosslink density, crystallinity and content of oxazolidone rings.     

Hydrolytic degradation of POSS-PEG-lactide hybrid hydrogels

A polyhedral oligomeric silsesquioxane (POSS), functionalized with eight arms of poly(ethylene glycol) (PEG; MW 400) and then acrylated, was incorporated into a hydrogel network based on triblock copolymers of poly(lactide-b-ethylene glycol-b-lactide) diacrylates using a redox-initiated polymerization. The organic-inorganic hybrid hydrogels so prepared contained the inorganic crosslinker POSS from 1 to 28 wt.%. The degradation properties of the hydrogels in a pH 7.4 phosphate-buffered saline solution at 37 °C were studied using measurements of mass loss, cryogenic SEM, and ATR-FTIR spectroscopy. It was found that copolymerization of acrylated 1kPEG-lactide with increasing amounts of POSS created a more porous network which was more resistant to hydrolysis. The ATR-FTIR technique was used to monitor the progress of degradation with exposure time through the changes in the carbonyl and C-H deformation bands of the lactide and the Si-C stretching band of the POSS. Increasing POSS incorporation resulted in decreased rate of degradation due to its hydrophobic nature and inertness to hydrolysis. Conversely, an increase in lactide content increased the degradation rate due to the increased number of hydrolytically-sensitive ester groups in the network.