浓度对草酸与酸性高锰酸钾溶液褪色反应速率的影响研究

通过比较同体积、不同浓度的草酸溶液与同体积、同浓度的酸性高锰酸钾溶液反应时溶液褪色时间的不同,使学生体会反应物浓度对反应速率的影响。为适应课堂教学,研究了各种反应物浓度对该反应速率的影响,为一线教师配置适合课堂教学的各种反应物的浓度提供了较为准确的数据。     

壳聚糖超声可控降解及降解动力学研究

通过正交实验法考察了壳聚糖溶液浓度、反应温度、超声强度以及醋酸溶液浓度对超声降解反应的影响,确定了最佳反应条件,制备了一系列不同分子量的壳聚糖.研究了壳聚糖溶液浓度、反应温度以及壳聚糖原料分子参数与降解速率常数的关系.通过红外光谱、X-射线衍射和凝胶渗透色谱对降解产物进行了表征.结果表明,超声降解壳聚糖的最佳条件为10℃,壳聚糖溶液浓度2.5g/L.降解速率常数随壳聚糖溶液浓度和反应温度的降低而增大.高分子量和低脱乙酰度的壳聚糖原料有较高的降解速率和降解速率常数,壳聚糖原料的分子量对降解速率和降解速率常数的影响大于脱乙酰度对其的影响.超声波导致了壳聚糖分子量的降低和产物晶体结构的破坏,但没有改变产物的脱乙酰度和糖残基结构.     

大孔树脂对红霉素的吸附动力学研究

利用大孔吸附树脂Amberlite XAD16及HZ816对红霉素的吸附动力学实验,研究了温度、初始浓度、溶液pH值及搅拌速度等因素对吸附过程的影响.结果表明,Amberlite XAD16及HZ816对红霉素的吸附速率符合一级吸附动力学方程及颗粒内扩散方程,过程受液膜扩散阻力及颗粒内扩散阻力共同影响.同时,表观吸附速率常数与颗粒内扩散速率常数均随着温度的升高而增大,随着初始浓度的增大而增大,随着溶液pH值增大而增大,随着搅拌速度加快而增大.     

RGB解析法探究化学反应速率的影响因素*

针对高锰酸钾与草酸的褪色反应,利用RGB解析手段建立了定量测定体系中的高锰酸钾浓度的方法,并通过此法探究了浓度、温度、催化剂对该反应的影响。据此得到的标准比色卡和标准曲线,可为其他教师提供定量研究工具,帮助其在课堂中快速进行实验探究。     

在 Pt/TiO2上光催化降解污水中的对氟苯甲酸

在Pt/TiO2存在下,研究了光催化降解对氟苯甲酸的反应.考察了反应时间、溶液初始pH值以及污染物初始浓度对光催化反应的影响.结果表明,溶液的紫外吸光度值随反应时间不断下降;反应7 h时,溶液的TOC去除率达23.2%;反应0.5～2 h内,氟离子平均生成速率为3.53×10-5mol.L-1.h-1;在反应3～7 h内,氟离子平均生成速率为6.22×10-5mol.L-1.h-1.在溶液初始pH值=3.34～3.72时,氟离子生成速率最大,在碱性范围内,氟离子的生成速率为零.当C0(p-fluorobenzoic acid)<1.80×10-3mol.L-1时,光催化降解生成氟离子的速率随着对氟苯甲酸浓度的增大而增大;当C0(p-fluorobenzoic acid)>2.00×10-3mol.L-1时,光催化降解生成氟离子的速率不再随污染物浓度的变化而发生变化.探讨了可能的反应机理.     

以草酸为电子给体在Pt-TiO2上光催化生成氢

 以草酸为电子给体,研究了在Pt－TiO2上光催化生成氢的反应．草酸的存在明显促进了生成氢的反应;二氧化钛负载Pt也明显提高了反应速率,Pt的最佳负载量为w（Pt）＝0．5％．草酸浓度对氢生成反应的影响符合Lang－muir关系式．最佳pH值为2～4．     

化学浴沉积cawo4薄膜的动力学

对化学浴沉积法制备的CaWO4薄膜进行了动力学研究。采用Avrami-Erofeev方程进行计算,得到反应温度40~80℃和反应溶液pH值为8~12条件下,CaWO4薄膜的动力学方程。结合实验分析各动力学参数的变化,发现反应温度越高,反应速率常数k越大,薄膜趋向于自发形核生长;反应溶液pH值越高,反应速率常数k显著减小,Avrami指数n则几乎不变。结果可见,pH值对反应速率的影响大,而对成核和生长方式影响小。pH值对反应速率的影响主要在于改变了Ca-EDTA螯合体的络合稳定性,进而影响整个反应的进行速度。通过动力学研究可以明确反映反应参数对薄膜生长的影响,体现了薄膜生长过程的本质,有助于达到有效控制反应过程的目的。     

光-Fe3+-草酸体系中对氯苯酚的冰相光转化

本文利用室内低温反应装置研究了在模拟太阳光-Fe3+-草酸作用下冰相中对氯苯酚（4-CP）的光转化。结果表明,Fe3+-草酸存在条件对冰相中4-CP的光转化有促进作用。Fe3+和草酸初始浓度、Fe3+与草酸的初始浓度比以及初始pH值对体系中4-CP的转化率具有较大影响。当溶液初始pH值为6.50,Fe3+和草酸的初始浓度比是1/5,草酸初始浓度为0.80mmol/L时,4-CP光照7.5h转化率可达39.1%。在光转化过程中,TOC的转化率滞后于4-CP的光转化率。4-CP的光转化符合一级动力学模型。分别利用直接萃取法和衍生化法富集了反应中间产物,并采用GC-MS进行了分析,据此推断了冰相中模拟太阳光-Fe3+-草酸作用下4-CP光转化的反应机理。     

温度、pH值和氯离子对X80钢钝化膜内点缺陷扩散系数的影响

借助于Mott-Schottky和点缺陷模型(PDM)研究了溶液温度、pH值以及氯离子对X80管线钢在模拟土壤环境中所形成钝化膜内点缺陷扩散系数D₀的影响. 结果表明: 随着溶液温度的升高、溶液pH值的降低以及氯离子浓度的增大, 钝化膜内的施主密度呈现增大的趋势. 依据点缺陷模型可以得到钝化膜内点缺陷(假设点缺陷为氧空位或铁离子间隙)的扩散系数D₀达到10^－16～10^－17 cm²&#8226;S^－1, 且D₀随着溶液温度的升高、溶液pH值的降低及氯离子浓度的增加而增大.     

Sm-N-P-TiO_2纳米光催化剂在模拟太阳光下光催化降解4-氯酚的动力学

采用改进的溶胶-水热技术,制备了新型高性能Sm-N-P-TiO2纳米光催化剂。考察了条件因素对4-氯酚(4-CP)溶液在模拟太阳光下光催化降解的影响规律,并对不同催化剂的光活性进行了对比研究。结果表明,在实验条件下,4-CP光催化降解行为符合准一级动力学规律;随着4-CP溶液浓度增大,一级反应速率常数不断降低。在4-CP溶液初始浓度40 mg/L、催化剂用量1.5 g/L、溶液pH=5.2、溶液温度36℃、500 W氙灯照射2 h条件下,4-CP完全分解,表观速率常数Kapp为5.32×10-2min-1,Sm-N-P-TiO2的光催化活性是混晶型纳米TiO2(P25)的3.49倍;TOC去除率达到96.8%。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.