川佛手中多酚类物质的微波和超声波联合提取工艺优化

采用微波和超声波提取技术,实现了川佛手中多酚类物质的有效提取.在微波功率800 W和微波提取时间40 min的条件下,通过单因素实验条件优化,考察了超声功率、乙醇浓度、提取温度、超声时间和提取料液比对提取效率的影响;通过正交试验设计,确定了最佳提取工艺条件参数,即超声功率800 W、乙醇体积分数60%、提取温度55℃、超声时间1.0 h和提取料液比1∶20 g/m L;通过验证实验,得到川佛手多酚的提取率约为20.79 mg/g.     

何首乌中二苯乙烯苷的超临界CO_2萃取工艺优化

以何首乌为原料,采用超临界CO_2萃取技术提取二苯乙烯苷.考察了萃取温度、萃取压强、萃取时间和料液比等单因素对提取效率的影响,通过正交试验设计,优化了何首乌中二苯乙烯苷的提取工艺条件,确定了二苯乙烯苷的最佳提取工艺参数:萃取温度55℃,萃取压强25 MPa,萃取时间2.5 h和料液比1∶4 g/m L.在此条件下进行实验验证,何首乌中二苯乙烯苷的提取效率达到7.08%.     

藜蒿中黄酮类化合物的微波辅助萃取研究

应用密闭微波萃取装置，分别对藜蒿茎和藜蒿叶中黄酮类化合物进行微波萃取研究。采用正交试验方法得到微波提取藜蒿中黄酮类化合物的最佳条件。微波提取藜蒿茎的最佳条件为乙醇体积分数70％，微波功率800W，提取温度80℃和料液比1：20；微波提取藜蒿叶的最佳条件为乙醇体积分数70％，微波功率600W，照射时间12min，提取温度70℃和料液比1：20；在最佳条件下，藜蒿茎和叶中总黄酮提取率分别为6．43％和7．01％。并将微波萃取与乙醇回流提取进行了比较。     

微波提取龙须藤多糖的最佳条件研究

选取微波功率、提取温度、提取时间和料液比作为因素,以毛细管电泳-紫外检测测定龙须藤多糖水解产物中的单糖峰面积总和为指标,通过单因素和正交试验,对提取条件进行了优化.结果表明,最大影响因素为微波功率,其次为提取温度,再次为提取时间,最后为料液比.最优提取条件为微波功率600 W,提取温度70 ℃,提取时间25 min,料液比1:35.     

微波法提取水蓼中总黄酮的工艺研究

研究了水蓼中总黄酮的微波提取最佳工艺。采用单因素试验和正交试验考察微波功率、乙醇浓度、微波辐射时间、料液比对水蓼中总黄酮提取率的影响,优选提取工艺。最佳工艺条件为:微波功率为520W,乙醇浓度为60%,微波辐射60s,间歇辐射3次,料液比为1g∶20mL。结果表明,微波提取具有提取率高、提取速度快等特点,用于中草药的提取应用前景广阔。     

微波辅助萃取满山红叶中总黄酮的研究

用带可控温的Star-2型开罐式微波消解仪对满山红叶中的总黄酮进行了微波萃取研究。通过正交试验考察了微波萃取溶剂、微波辐照时间、萃取温度和液固比等条件对满山红中总黄酮萃取率的影响。结果表明,在乙醇浓度为80％、萃取温度为90℃、微波辐照时间为10min、液固比为40：1的条件下,微波萃取满山红叶中总黄酮萃取率最佳。与传统回流法相比,萃取率提高了16％。     

正交试验与响应面法优化微波提取地黄多糖工艺研究（英文）

为了获得微波提取地黄多糖的最佳条件,采用正交试验法和响应面法分别优化微波提取地黄多糖工艺,以地黄多糖得率为指标,采用微波提取地黄多糖,苯酚-硫酸法测定地黄多糖的含量,以微波提取时间、提取温度和料液比进行三因素分析,根据单因素试验结果设计正交试验和响应面试验,进一步优化微波提取地黄多糖工艺。微波提取地黄多糖工艺通过正交试验法优化的结果表明,最佳条件为微波提取时间150 s,提取温度80℃,料液比1 g∶10 mL,该条件下的地黄多糖得率为72.10%。响应面法优化微波提取地黄多糖工艺的结果表明,修正后的最佳工艺条件为微波提取时间137 s,提取温度89℃,料液比1 g∶8 mL,该条件下的地黄多糖得率为74.41%。经过两种优化方法的比较,响应面法适合优化微波提取地黄多糖工艺,能够有效提高地黄多糖得率。     

微波萃取-气相色谱法测定血液中的甲基苯丙胺

建立了人体血液中甲基苯丙胺的微波萃取-气相色谱测定方法。分别考察了萃取溶剂种类、用量、样品pH值以及萃取温度、时间等因素对萃取率的影响,并与液-液萃取法进行比较。结果表明,在相同条件下,微波萃取率高于液-液萃取。血液中甲基苯丙胺的最佳提取条件为:调节血样pH为13,以乙酸乙酯为萃取溶剂,于30 ℃下微波提取 8 min。在此条件下平均萃取率达到81.4%,相对标准偏差为6.4%(n=5)。提取液经气相色谱-氢火焰离子化检测器检测,甲基苯丙胺和基体之间得到了很好的分离,对血液中甲基苯丙胺的最低检测限为220 μg/L。该方法是一种快速、准确、灵敏的测定血液中甲基苯丙胺的方法。     

刺五加中黄酮类化合物的微波辅助提取研究

利用微波辅助提取法(MAE)提取刺五加中的黄酮类化合物,通过正交实验,考察了微波提取条件(包括溶剂、微波辐射时间、提取压力和料液比)对刺五加中总黄酮提取率的影响,结果表明：溶剂为50％乙醇,提取压力为700kPa,提取时间为10min,料液比为1：20时,提取率最佳。与索氏提取法相比较,提取率可提高40％。     

响应面法优化-微波辅助萃取-高效液相色谱法测定农吉利中牡荆素和异牡荆素

应用响应面法优化了乙醇微波辅助萃取农吉利中牡荆素和异牡荆素的条件,用高效液相色谱法测定提取液中牡荆素和异牡荆素的含量。用单因素试验选取了萃取温度、液料比及萃取时间等3项条件,并在此基础上,用中心组合试验设计,采用三因素三水平数学模型和响应面法分析进行优化,确定了最优提取条件为:①萃取温度152℃;②液料比为44:1;③萃取时间6.6 min。在此条件下牡荆素和异牡荆素的提取率分别为253.3,236.9μg·g^-1,与理论值相近。样品加标回收率分别在97.0%～104%和96.0%～102%之间。     

Determination of major and trace elements in human scalp hair by pressurized-liquid extraction with acetic acid and inductively coupled plasma–optical-emission spectrometry

An analytical method has been developed for determination of major (Ca, K, Mg, and Na) and trace elements (As, Cd, Co, Li, Ni, and Sr) in human scalp hair. The proposed method includes a novel, simple, rapid, highly efficient, and automated metal-leaching procedure, by pressurized-liquid extraction (PLE), combined with a rapid simultaneous detection system—inductively coupled plasma–optical-emission spectrometry (ICP–OES). PLE is one of the most promising recently introduced sample-preparation techniques, with the advantages of reducing solvent consumption and enabling automated sample handling. The operating conditions for PLE, including concentration of the extraction solvent, extraction temperature, static time, number of extraction steps, pressure, mean particle size, diatomaceous earth (DE) mass/sample mass ratio, and flush volume were studied using an experimental design (Plackett–Burman design, PBD). The optimum conditions were use of 0.75 mol L⁻¹ acetic acid as extracting solution and powdered hair samples thoroughly mixed with DE, as a dispersing agent, at a DE mass/sample mass ratio of 4. Extraction was performed at room temperature and an extraction pressure of 140 atm for 5 min in one extraction step. The flush volume was fixed at 60%. The PLE-assisted multi-element leaching proposed is complete after 7 min (5 min static time plus 1 min purge time plus 1 min end relief time). Under the optimised conditions the figures of merit, for example limits of detection and quantification, repeatability of the over-all procedure, and accuracy, were evaluated. Analysis of GBW-07601 (human hair) certified reference material revealed accuracy was good for the target elements. The optimised method was finally applied to several human scalp-hair samples.     

Comparison of microwave-assisted extraction of aloe-emodin in aloe with Soxhlet extraction and ultrasound-assisted extraction

This paper reports the extraction of aloe-emodin from aloe by microwave-assisted extraction.The effects of various factors,including the solvent,the ratio (mL/g) of the solvent to the sample,microwave irradiation time and microwave power,were discussed in the experiments.The yield of aloe-emodin was determined by HPLC.The optimized conditions for microwave-assisted extraction of aloe-emodin were concluded as follows: the solvent is 80% ethanol (V/V) solution,microwave irradiation time is 3 min and microwave...     

Optimization of flavanones extraction by modulating differential solvent densities and centrifuge temperatures

Understanding the factors influencing flavonone extraction is critical for the knowledge in sample preparation. The present study was focused on the extraction parameters such as solvent, heat, centrifugal speed, centrifuge temperature, sample to solvent ratio, extraction cycles, sonication time, microwave time and their interactions on sample preparation. Flavanones were analyzed in a high performance liquid chromatography (HPLC) and later identified by liquid chromatography and mass spectrometry (LC-MS). The five flavanones were eluted by a binary mobile phase with 0.03% phosphoric acid and acetonitrile in 20 min and detected at 280 nm, and later identified by mass spectral analysis. Dimethylsulfoxide (DMSO) and dimethyl formamide (DMF) had optimum extraction levels of narirutin, naringin, neohesperidin, didymin and poncirin compared to methanol (MeOH), ethanol (EtOH) and acetonitrile (ACN). Centrifuge temperature had a significant effect on flavanone distribution in the extracts. The DMSO and DMF extracts had homogeneous distribution of flavanones compared to MeOH, EtOH and ACN after centrifugation. Furthermore, ACN showed clear phase separation due to differential densities in the extracts after centrifugation. The number of extraction cycles significantly increased the flavanone levels during extraction. Modulating the sample to solvent ratio increased naringin quantity in the extracts. Current research provides critical information on the role of centrifuge temperature, extraction solvent and their interactions on flavanone distribution in extracts.     

Enhanced flow injection leaching of rocks by focused microwave heating with in-line monitoring of released elements by inductively coupled plasma mass spectrometry

A focused microwave digestion system was used to heat a mini-column of sample of crushed rock (hematite) during its successive leaching by repeated 250-μL injections of water, HNO₃ 1%, 10% and 30% (v/v). The mini-column was connected to the nebulizer of an inductively coupled plasma mass spectrometry instrument, which allowed a continuous monitoring of the progressive release of elements by a given leaching reagent. Quantitation of the accessible fraction of Mg, V, Cr, Mn, Co, Ni, Cu, Zn, Mo, Sb and Pb was done by calibration using 250-μL injections of standard solutions prepared in the leaching reagent matrices. Total digestion of the sample residue was also done to verify mass balance. With the exception of Mg, V and Co, where the same total amount was released with or without microwave heating, an increased release resulted from focused microwave heating, by up to an order of magnitude. Furthermore, mass balance was verified for more elements using microwave heating, presumably because of a lower relative proportion of spectroscopic interference as a result of an increased release of analytes. Using microwave energy in general resulted in the dissolution of additional phases, as evidenced by significantly different ²⁰⁸Pb/²⁰⁶Pb ratios as well as the increased release of elements with milder reagents. In fact, in the case of Pb, leaching with 30% HNO₃ was no longer necessary as all the Pb was released in the first three leaching reagents. Microwave heating could therefore be used advantageously in on-line leaching for exploration geochemistry and environmental monitoring.     

Microwave-assisted extraction and mild saponification for determination of organochlorine pesticides in oyster samples

A sample-preparation procedure (extraction and saponification) using microwave energy is proposed for determination of organochlorine pesticides in oyster samples. A Plackett-Burman factorial design has been used to optimize the microwave-assisted extraction and mild saponification on a freeze dried sample spiked with a mixture of aldrin, endrin, dieldrin, heptachlor, heptachorepoxide, isodrin, transnonachlor, p, p'-DDE, and p, p'-DDD. Six variables: solvent volume, extraction time, extraction temperature, amount of acetone (%) in the extractant solvent, amount of sample, and volume of NaOH solution were considered in the optimization process. The results show that the amount of sample is statistically significant for dieldrin, aldrin, p, p'-DDE, heptachlor, and transnonachlor and solvent volume for dieldrin, aldrin, and p, p'-DDE. The volume of NaOH solution is statistically significant for aldrin and p, p'-DDE only. Extraction temperature and extraction time seem to be the main factors determining the efficiency of extraction process for isodrin and p, p'-DDE, respectively. The optimized procedure was compared with conventional Soxhlet extraction.     

Development of gas chromatography-mass spectrometry following microwave distillation and simultaneous headspace single-drop microextraction for fast determination of volatile fraction in Chinese herb

In this work, for the first time, microwave distillation (MD) coupled with simultaneous headspace single-drop microextraction (HS-SDME) was developed for the determination of the volatile components in the Chinese herb, Artemisia capillaris Thunb. The volatile components were rapidly isolated by MD, and simultaneously extracted and concentrated by using a dodecane microdrop. The volatile oil extracted in the microdrop solvent was analyzed by gas chromatography-mass spectrometry (GC-MS). The experimental parameters of solvent selection, microdrop volume, microwave power, irradiation time and sample amount were investigated, and the method precision was also studied. The optimal parameters were extraction solvent of dodecane, solvent volume of 2.0 microL, microwave power of 400 W, irradiation time of 4 min, and sample amount of 2.0 g. Thirty-five volatile compounds present in Artemisia capillaris Thunb. were identified by using the proposed method, which were identical with those obtained by the conventional steam distillation method. The experimental results showed that MD-HS-SDME is a simple, rapid, reliable, and solvent-free technique for the determination of volatile compounds in Chinese herbs.     

Analytical-scale microwave-assisted extraction

Microwave-assisted extraction (MAE) is a process of using microwave energy to heat solvents in contact with a sample in order to partition analytes from the sample matrix into the solvent. The ability to rapidly heat the sample solvent mixture is inherent to MAE and the main advantage of this technique. By using closed vessels the extraction can be performed at elevated temperatures accelerating the mass transfer of target compounds from the sample matrix. A typical extraction procedure takes 15-30 min and uses small solvent volumes in the range of 10-30 ml. These volumes are about 10 times smaller than volumes used by conventional extraction techniques. In addition, sample throughput is increased as several samples can be extracted simultaneously. In most cases recoveries of analytes and reproducibility are improved compared to conventional techniques, as shown in several applications. This review gives a brief theoretical background of microwave heating and the basic principles of using microwave energy for extraction. It also attempts to summarize all studies performed on closed-vessel MAE until now. The influences of parameters such as solvent choice, solvent volume, temperature, time and matrix characteristics (including water content) are discussed.     

微波消解-FAAS法测定大别山区三种中药中的微量元素

采用微波消解-火焰原子吸收光谱(FAAS)法对大别山区3种中药(何首乌、黄精和拐枣)中的微量元素进行测定。用微波消解仪处理样品,对消解条件及消解程序进行优化,在最佳微波消解条件下,结合FAAS法测定上述3种中药中Ca、Mg、Cu、Zn、Fe、Mn 6种元素的含量。结果表明,微波消解的最佳条件为:何首乌和拐枣采用HNO3-H2O2混酸体系,配比分别为5∶2和5∶3,固液比1∶20,最高功率(700W)时的保温时间分别为8min和6 min;黄精采用HNO3-HCl,混酸体系,配比5∶2,固液比1∶28,保温时间为8 min。所建立的定量分析方法回收率为95.63%～101.36%,相对标准偏差小于3.0%,线性相关系数大于0.999,方法检出限为0.18～2.20 ng/mL。3种中药中均含有丰富的微量元素,尤其是黄精中Fe、Ca和Mn的含量较高;何首乌中Mg、Zn和Fe含量相对较高;拐枣中Fe和Ca含量相对较高。研究结果可为上述3种中药中微量元素的含量与其药效的相关性提供科学依据。     

氨浸取粗氧化锌粉中锌的工艺研究

研究以粗氧化锌为原料制取活性氧化锌的浸取工艺。采用氨配合法将粗氧化锌中的锌充分浸取,以低级氧化锌为原料,对固液比、反应时间、碳酸氢铵用量、反应温度等因素先进行单因素实验,考察对氨配合法浸取率的影响,并在此基础上对主要的影响因素进行正交实验,从而优化出最佳浸取工艺条件为:浸取温度40℃,浸取时间3 h,固液比70 g/mL,碳酸氢铵用量2.5 g,浸取率可达92%。     

Microwave-assisted solvent extraction and gas chromatography ion trap mass spectrometry procedure for the determination of persistent organochlorine pesticides (POPs) in marine sediment

Microwave-assisted solvent extraction of persistent organochlorine pesticides (POPs) in marine sediment was developed and optimized by means of two-level factorial designs. Six variables (microwave power, extraction time and temperature, amount of sample, solvent volume, and sample moisture) were considered as factors in the optimization process. The results show that the amount of sample to be extracted and solvent volume are statistically significant for the overall recovery of the studied pesticides, although compromise conditions have to be established with the object of avoiding overpressure in closed vessels. After extraction, a clean up step including the use of a silica cartridge was performed prior to chromatographic determination in order to remove interferences. The optimized procedure was compared to conventional Soxhlet extraction. The MS-MS ion preparation mode was applied to improve the sensitivity and selectivity of the chromatographic technique.