官能化蒙脱土负载双金属催化芳香氯化物水相脱氯

用PVP(聚乙烯吡咯烷酮)络合双金属Pd^2 ,Sn^4 后，再负载于用PEG400(平均分子量为400的聚乙二醇)官能化的蒙脱土上，制成双金属催化剂PVP—PdCl2-SnCl4/Montk10-PEG400,用于催化难溶于水的芳香卤化物水相脱卤，芳香族氮化物转化率达100％，该催化剂可重复使用。对催化剂进行了IR及TEM表征。     

双负载双金属催化剂催化芳香卤化物水相脱卤的研究

用PVP（聚乙烯吡咯烷酮）配合双金属Pd—Mn后,再负载于PEG400（平均分子量为400的聚乙二醇）官能化的高岭土上,制成双负载双金属催化剂PVP—PdCl2-MnCl2／GLM—PECA00,用于催化不溶于水的芳香卤化物水相脱卤,对芳香氯化物呈现出高的脱氯活性,重复使用六次转化率仍可达到62．14％,通过IR,TEM,XPS的表征对催化剂各组分在催化脱卤中的作用进行了探讨．     

官能化硅胶负载Pd—Cu催化剂的制备及催化芳香氯化物水相脱氯作用

将聚乙烯吡烷酮（PVP）与双金属Pd^2 、Cu^2 配位后,再负载于用平均分子量为600的聚乙二醇（PEG）官能化的硅胶上（SiO2-PEG600),制成一种新型双负载双金属催化剂PVP-PdCl2-CuCl2/SiO2-PEG600,将其用于催化难溶于水的芳香卤化物水相脱卤,在无需加入任何有机溶剂的情况下,对芳香氯化物呈现出高的脱氯活性和选择性,并具有良好的重复使用性能。通过IR、TEM、比表面积测定等手段,探讨了催化剂各组分在催化脱卤中的作用及可能的催化脱卤机理。     

PVP-蒙脱土双负载Pd-Sn催化剂催化芳香卤化物水相脱卤

负载型双金属催化剂 ,由于双金属的协同作用 ,使催化活性明显提高 .因而负载型双金属催化剂用于催化有机反应 ,已成为人们研究的热点 .高聚物负载双金属催化剂催化有机卤化物脱卤已有报道[1～ 3] ,但脱卤反应大多在有机相中进行 ,若在水相中 ,催化剂则失去活性[2 ] ,且不易回收和重复使用 .然而有毒的卤化物常存在于化工、印染等工业排放的废水中 ,这些废水流入江、河、湖、海或渗漏在地下 ,造成对水体的严重污染 .为消除废水中有机卤化物对环境的污染 ,我们将 PVP(聚乙烯吡咯烷酮 )负载双金属后再负载到无机载体蒙脱土( Mont K1 0 )上 ,…     

PVP-PdCl2-CuCl2/SiO2-PEG600催化芳氯化物水相脱氯研究

PVP(聚乙烯吡咯烷酮)负载双金属催化剂催化芳香氯化物脱氯已有报道[1～3];利用双金属的协同作用,可以大大提高催化剂的脱氯活性和选择性[4]. 但是,这些研究多是在有机相中进行的,催化剂在水相中则会降低甚至失去活性,且难以回收和重复利用. 然而,难溶于水的有毒芳香氯化物,常存在于工业或生活排放的废水中. 由于治理环境的需要,研究芳香氯化物催化水相脱氯,则是极具挑战性的课题. 本文把起相转移作用的聚乙二醇(PEG)键合到硅胶上作为固相载体,制成双负载双金属水相脱氯催化剂PVP-PdCl2-CuCl2/SiO2-PEG600,成功地用于难溶于水的芳香氯化物的水相脱氯. 研究结果表明,这种催化剂对于芳香氯化物有良好的催化脱氯性能,使用中便于分离并能重复利用. 同时,用IR,TEM和XPS等手段对催化剂进行了表征,探讨了催化剂中各组分在催化脱氯中的作用.     

高聚物负载型双金属催化剂催化氢转移有机卤化物脱卤

 以甲酸钠为氢转移试剂,以聚乙烯基吡咯烷酮负载PdCl2和其它金属盐制成双金属催化剂PVP－PdCl2－MXn,用于催化有机卤化物脱卤．与负载型单金属催化剂PVP－PdCl2相比,PVP－PdCl2－CdCl2和PVP－PdCl2－HgCl2对氯代芳烃脱氯有高得多的催化活性和脱氯选择性,且偶联副产物显著减少;以对氯苯胺为底物时,双金属催化下的反应时间缩短为单金属催化下的1／8,而脱氯产物收率提高25倍;底物为对氯甲苯时,双金属催化下的偶联副产物仅为单金属催化下的1／390．用IR和TEM技术对PVP负载型金属催化剂进行了表征,并讨论了双金属协同脱卤作用．     

PdCl2-NiCl2-PPh3/PVP催化苯乙烯高区域选择性的氢酯化反应

烯烃与CO和醇的催化氢酯化反应是合成竣酸酯的一种简便方法．当烯烃是芳香烯烃时,其产物可用来制备极有价值的非自类解热镇痛抗炎药物ibaprofe。。、naproxen（支链型2一芳基丙酸类）：ArCH。（二。＋CO＋ROH、ArCH（CH。）COOR＋ArCH。CH。COOR＋ArCHfH。toRPd（OAc）。－rnontmorlllonlte－PPh。－HC卜和Pd（OAc）。－PPh。－p－toluenesulfonicacid'惮金属体系在高PPh。／Pd比的PPhs存在下,可高转化率、高选择性地催化芳香烯烃氢酯化反应生成支链酯．近年来高分子负载的双金属体系在选择性加氢"'、加氢脱氯"'中表…     

水溶性含钌-铂双金属催化剂催化卤代芳香硝基化合物选择性加氢

考察了水溶性Ru/Pt-TPPTS双金属催化剂催化卤代芳香硝基化合物的加氢性能.实验结果表明,在Ru-TPPTS中添加铂或钯后,反应活性明显提高,尤其是Ru/Pt-TPPTS双金属催化剂更表现出显著的双金属协同效应.在pH₂=1.0MPa,70℃,反应2h的条件下,双金属催化剂0.50Ru/0.50Pt-TPPTS催化对-氯硝基苯加氢生成对-氯苯胺的反应转化率达到100%.对于取代基和取代位置不同的一些卤代硝基苯加氢,该双金属催化剂也表现出很高的催化活性和生成卤代苯胺的选择性,脱卤反应的程度很小.     

Pt/Al2O3和Pt-Cu/Al2O3催化CCl4氢化脱氯反应

制备了Al2O3负载Pt单金属催化剂和负载Pt-Cu双金属催化剂,比较了二者不同还原温度对其催化CCl4氢化脱氯反应性能的影响。 单金属Pt催化剂上主要生成CHCl3,而双金属Pt-Cu催化剂上产物随催化剂制备时的还原温度不同而异,当催化剂经400 ℃用H2还原后产物主要为CHCl3,而当催化剂经800 ℃用H2还原后产物主要为CCl2CCl2。 由于CCl4氢化反应是强放热反应,催化剂表面局部过热使得在反应中生成的C2等产物聚合结焦,覆盖了催化剂的活性中心,导致催化剂失活。 因此,通过加入甲醇作为稀释剂以带走部分反应热可提高催化剂的稳定性。 同时也降低了CHCl3的选择性,提高了CCl2CCl2的选择性。     

蒙脱士负载钯催化芳基溴化物脱溴性能研究

芳基溴化物催化脱溴 ,无论在有机合成 ,还是消除芳基溴化物对环境的污染方面均具有重要意义 .催化脱卤已有许多研究报道 [1] .常用的负载催化剂为 Pd/C[2 ] ,这种催化剂催化活性较高 ,但对不同卤素的选择性较差 ,贵金属钯损失较大 .用功能化的蒙脱土负载钯催化剂 [3 ]催化芳基溴化物的脱溴 ,有较好的脱溴性能 ,但脱溴时间较长 ,且催化剂制备困难 .我们用胺为吸附质 ,将钯负载在廉价的蒙脱土上制成蒙脱土负载钯催化剂 ,并将其用于催化有机卤化物脱卤 .结果表明 ,该负载钯催化剂对芳基溴化物脱溴具有显著的催化活性和选择性 ,且催化剂易于制…     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。     

Acid hydrolysis of carboxymethylcellulose of low degree of substitution

Cotton cellulose was swollen in a sodium hydroxide solution and carboxymethylated by a two-bath method for different periods of time for each process. The kinetics of acid hydrolysis and the crystallinity of the swollen and carboxymethylated samples were measured. The proportion of broken bonds, rate constants for hydrolysis, and permeability of cellulose to hydrolyzing agents were calculated. The susceptibility of glycosidic linkages to acid hydrolysis was improved by carboxymethylation more than by swelling in alkali. The increased accessibility of carboxymethylcellulose to acid was regarded as a consequence of increased intra-and intercrystalline swelling and of the glycosidic bonds' weakness caused by the electron-attracting carboxymethyl group on the C-6 position.     

氯氧化镁生成热的研究

用氧化镁氯化镁水溶液制备了8水合氯氧化镁[nMg(OH)2·MgCl2·8H2O], 并测定了其在盐酸中的溶解热, 实验结果表明, 氯氧化镁溶解热与n值呈线性关系, 根据溶解热求出5Mg(OH)2·MgCl2·8H2O和3Mg(OH)2·MgCl2·8H2O的生成热分别为-7727.1和5888.1kJ·mol^1^-。     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

Estimation of Kinetic Parameters of Thermal Oxidation of Ilmenite

The aim of the presented work was the investigation of thermal oxidation of ilmenite in static air atmosphere. The investigations were carried out by use of a derivatograph (MOM, Hungary). The changes of crystallographic structure of investigated samples were identified by X-ray diffractometry on Philips PW-1710 diffractometer. In temperature above 500°C appears structure of hematite Fe₂O₃. On the basis of the thermogravimetric measurements, the contracting area and contracting volume models were found as the best fitting experimental data. This revised version was published online in August 2006 with corrections to the Cover Date.     

Mechanism of action of base-catalyzed oxygenation of phenol derivatives

Cyclopropyl derivative of 2,6-di-tert-butylphenol is synthesized as a probe to investigate the mechanism of base-catalyzed autooxidation of phenol derivatives. Our study indicates that one electron reduction of molecular oxygen from phenolate gives phenoxyl radical 3, a key intermediate of autooxidation. The coupling of phenoxyl radical and superoxide radical gives peroxylate anion 4 and produces the final epoxy alcohol adduct 6.     

Synthesis of phenolic components of Grains of Paradise

Two vanilloids, (5E)-8-(4-hydroxy-3-methoxyphenyl)oct-5-en-4-one (1) and 4-[3-hydroxydecyl]-2-methoxyphenol (2), isolated from the dried seeds of Grains of Paradise (Aframomum melegueta), were synthesized; the latter compound was made as the S-enantiomer and the material derived from the seeds was found to be a 1:1.7 mixture of the R and S isomers. The synthetic route used should allow the preparation of analogs having extended alkyl chains and consequently different lipophilicity, and 3, a homolog of 2, was also prepared.     

化学计量中不确定度评定研究进展

测量不确定度是表征合理地赋予被测量之值的分散性的参数。本文针对化学计量不确定度评定基础模型仅适用于线性模型、概率分布为正态分布或缩放位移t分布等局限,介绍了近年来不确定度评定的研究热点:蒙特卡罗方法(Monte Carlo Method,MCM),不确定度评定的来源、评定概念、评估方法及其发展过程,扩大了测量不确定度评定与表示的适用范围。     

微量钙的测定方法研究进展

介绍了1995-2006年期间测定微量和痕量钙的方法,如电感耦合等离子体-原子发射光谱法、原子吸收光谱法以及离子色谱法等的工作原理和特点,并说明了其测定微量钙的应用领域。并对微量钙的测定技术进行了展望(引用文献55篇)。