聚(2,5-苯并(口恶)唑)/多壁碳纳米管复合材料的制备与性能

采用强氧化性酸处理多壁碳纳米管(MWNTs),形成功能化的多壁碳纳米管(MWNTs-COOH)。用傅里叶红外光谱(FT-IR)对处理前后MWNTs的表面官能团进行了分析,并利用原位聚合法成功制备了聚(2,5-苯并噁唑)(ABPBO)/MWNTs-COOH纳米复合材料。结果表明:碳纳米管经过酸处理后,表面含有较多羰基和羟基极性官能团,在ABPBO基体中分散均匀;复合材料保持了ABPBO的优异耐高温性能,其力学性能和光物理性能也得到了很大的提高。     

聚(2,5-苯并噁唑)/多壁碳纳米管复合材料的制备与性能

采用强氧化性酸处理多壁碳纳米管(MWNTs),形成功能化的多壁碳纳米管(MWNTs-COOH)。用傅里叶红外光谱(FT-IR)对处理前后MWNTs的表面官能团进行了分析,并利用原位聚合法成功制备了聚(2,5-苯并噁唑)(ABPBO)/MWNTs-COOH纳米复合材料。结果表明:碳纳米管经过酸处理后,表面含有较多羰基和羟基极性官能团,在ABPBO基体中分散均匀;复合材料保持了ABPBO的优异耐高温性能,其力学性能和光物理性能也得到了很大的提高。     

受限空间内聚苯乙烯微粒的制备

以(N,N-二甲氨基-4-吡啶)五氰合铁(II)封端的聚氧丙烯聚氧乙烯共聚物(EPE-Fe)与苯乙烯在水中自组装形成纳米体系(EPE-Fe-St), 在纳米尺度受限空间内进行了苯乙烯自由基聚合, 制备了聚苯乙烯微球(EPE-Fe-PS). 用Fe³⁺对自组装体系的纳米球壳进行固化后形成Fe-EPE-Fe-St 体系, 聚合后也制备了聚苯乙烯微球(Fe-EPE-Fe-PS). 研究结果表明,制备了粒径为60～200 nm 的不同粒径单分散聚苯乙烯微球, 聚合温度对纳米Fe-EPE-Fe-St 体系粒径影响较小, 而对EPE-Fe-St 体系较大. 在受限空间内苯乙烯的自由基聚合可得到数均分子量超过70 万的聚苯乙烯; 自组装体系中引发剂量增多使聚苯乙烯分子量下降, 聚合温度上升也使分子量下降, 而增加自组装的EPE-Fe 用量可增加聚苯乙烯的分子量. 两种受限条件下的聚苯乙烯微球的玻璃化转变温度(T_g)在90～135 ℃之间, 纳米反应器壳层的硬化提高了聚苯乙烯微球的T_g.     

三元复合材料PANI／Ag／MWNT的电化学行为和比电容

通过原位聚合的方式在银纳米粒子/多壁碳纳米管（Ag/MWCNT）复合材料的表面成功聚合苯胺单体制备了聚苯胺/银纳米粒子/多壁碳纳米管（PANI/Ag/MWCNT）三元复合材料苯．通过对三元复合材料的结构以及表面形貌进行分析,表明聚苯胺层完全包覆了Ag/MWCNT复合材料,形成了核壳式结构．同时银纳米粒子则以单质晶体的形态存在于多壁碳纳米管与聚苯胺层之间．三元复合材料电极在1 mol/L的KOH溶液中具有极低的阻抗,而与聚苯胺电极相比,这些复合材料电极则表现出更低的电阻、更高的电化学活性和更好的循环稳定性．尤其是当苯胺和Ag：MWCNTs质量比为5：5时,该复合材料电极在0.25 A/g的电流密度下表现出最大的比电容值为160 F/g．     

聚合酞菁铁/多壁碳纳米管复合材料的制备及氧还原催化性能

采用高效、 便捷的微波合成法制备了4种不同结构的聚合酞菁铁/多壁碳纳米管(Poly-FePc/MWCNTs)复合材料并进行了表征. 结果表明, 聚合酞菁铁均匀地包裹在多壁碳纳米管上. 利用线性扫描电位法(LSV)和电化学阻抗法(EIS)对材料的氧还原催化活性进行了研究, 发现FePPc/MWCNTs复合材料具有最好的氧还原催化活性. 采用X射线光电子能谱(XPS)和X射线吸收精细结构光谱(XAFS)研究了Poly-FePc/MWCNTs复合材料中酞菁铁结构变化与氧还原催化性能的相关性. 结果表明, FePPc/MWCNTs复合材料中Fe-N₄接近平面结构, 聚合酞菁铁能够更好地与MWCNTs产生协同作用, 从而加速氧还原过程中电子的转移, 提高氧还原活性.     

超声辐照原位乳液聚合制备聚苯乙烯包覆碳纳米管复合材料的结构与性能

采用超声辐照原位乳液聚合方法制备了聚苯乙烯(PS)包覆多壁碳纳米管(MWNTs)复合材料. 用TEM, FTIR, UV, XPS, GPC和TGA研究了复合材料的结构和性能. 结果表明, MWNTs对苯乙烯聚合过程具有抑制作用, 聚苯乙烯包覆MWNTs, 两者之间有较强的相互作用, 使复合材料的热性能得到改善, 起始分解温度从388 ℃提高到422 ℃.     

聚乙酰苯胺修饰碳纳米管载铂催化剂对甲醇电催化氧化

以原位化学聚合的聚乙酰苯胺/多壁碳纳米管(PAANI-MWCNTs)复合纳米材料作为载体,采用硼氢化钠还原法将Pt纳米粒子担载到PAANI-MWCNTs复合纳米材料表面,制备了Pt/PAANI-MWCNTs复合纳米催化剂.样品的结构和形貌用紫外-可见(UV-Vis)光谱、拉曼光谱、扫描电镜(SEM)、透射电镜(TEM)和X射线衍射(XRD)进行了表征.结果表明,聚乙酰苯胺与碳纳米管之间存在较强的π-π相互作用,使其能牢固地吸附于多壁碳纳米管表面,对碳纳米管的结构完整性和导电性有一定的改善作用.同时,金属Pt纳米颗粒较为均匀地分散在PAANI-MWCNTs表面,粒径分布范围较窄.采用循环伏安法和计时电流法在酸性溶液中研究了Pt/PAANI-MWCNTs催化剂对甲醇的电催化氧化活性,结果表明Pt/PAANI-MWCNTs复合纳米催化剂比用混酸处理的碳纳米管载铂催化剂对甲醇呈现出更高的电催化氧化活性和更好的抗中毒能力及稳定性.     

基于Diels-Alder反应与原子转移自由基聚合制备核壳型碳纳米管-笼型倍半硅氧烷杂化材料

通过糠醇与溴代异丁酰溴的酯化反应制备了溴代异丁酸呋喃甲酯,其与多壁碳纳米管(MWNT)发生Diels-Alder环加成反应得到了原子转移自由基聚合(ATRP)的引发剂(MWNT-Br),MWNT-Br通过ATRP反应引发了八丙烯酸酯基笼型倍半硅氧烷(POSS)的聚合,从而实现了POSS对多壁碳纳米管的包覆,通过对MWNT-Br中溴代异丁酸呋喃甲酯接枝量的控制,包覆POSS层的厚度可以从5 nm、10 nm到15 nm精确调节.     

基于纳米银/多壁碳纳米管修饰电极的电化学法测定磺胺甲唑

以表面处理多壁碳纳米管(MWCNTs)和硝酸银为原料,利用硼氢化钠还原法制备了纳米银/多壁碳纳米管复合材料(AgNPs/MWCNTs),并通过紫外-可见吸收光谱、红外光谱、拉曼光谱和X射线衍射进行表征。采用滴涂法将该纳米复合材料修饰至玻碳电极表面,得到纳米银/多壁碳纳米管修饰电极(AgNPs/MWCNTs/GCE)。以AgNPs/MWCNTs/GCE为工作电极,研究了缓冲溶液、pH值、支持电解质和扫描速度对磺胺甲■唑(SMZ)电化学反应活性的影响。结果表明,与多壁碳纳米管、纳米银单独修饰电极相比,该纳米复合材料修饰电极对SMZ显示了更高的电催化活性。优化条件下,SMZ浓度在3.0×10~(-7)～5.0×10~(-5) mol/L范围内与峰电流呈线性关系,检出限(S/N=3)为6.4×10~(-8) mol/L。该方法操作简单、快速,可用于河水样品中SMZ的检测。     

纳米金/碳纳米管复合材料修饰电极催化鲁米诺电致发光体系的研究

制备了纳米金/多壁碳纳米管(MWNT)复合材料修饰电极,并将此电极应用于鲁米诺电化学发光体系.电化学发光实验表明,此复合材料修饰电极同时具备了纳米金和碳纳米管的催化性能.此外通过电极活性表面积测算、电化学交流阻抗实验等方法研究了纳米金和碳纳米管在此体系催化过程中的作用.纳米金/碳纳米管修饰电极具有良好的重现性,可以广泛应用于鲁米诺电化学发光测定体系.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.