微介孔复合分子筛合成及其在汽车冷启动尾气控制中的应用

分别采用稀溶液和浓溶液双模板剂两步水热合成法,以二氧化硅微硅粉和铝酸钠为硅源和铝源,第一步获得β分子筛晶种,第二步以β分子筛晶种为结构单元组装形成兼具MCM-41分子筛和β分子筛结构特点的复合型分子筛β/M(其中β是指β分子筛,M是指MCM-41介孔分子筛).采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、氮气吸附(BET)和高分辨透射电镜(HRTEM)对样品的物相结构和微观形貌进行了表征,并对复合分子筛的合成过程进行了分析.结果表明:复合分子筛β/M的形成是微孔β结构和介孔MCM-41结构的竞争生长过程,β分子筛晶种的晶化时间和晶粒度大小对β/M复合分子筛的结构有重要影响.此外,我们以甲苯为探针分子,比较研究了三类分子筛β/M、MCM-41和β的原样以及经高温水热处理后样品的吸附性能,结果表明:β/M复合分子筛的热稳定性优于介孔分子筛MCM-41,其甲苯吸附容量比MCM-41和β分子筛的高,其中以浓溶液法合成的复合分子筛吸附容量最高.     

在SO2-4/ZrO2-MCM-41上苯与丙烯的烷基化

硅基介孔材料M41S因具有较大的孔径和比表面积而引起从事多相催化、吸附分离以及非金属材料等领域研究人员的极大关注[1～4]. 其中MCM-41是最具代表性的成员之一, 但纯硅的MCM-41因无活性中心而不能用于催化领域. 最近已有将SO2-4/ZrO2超强酸及杂多酸负载到MCM-41上, 使其成为比表面积大、孔结构规则和环境友好催化剂的研究报道[5～7]. 本文在弱碱体系中制备了具有介孔孔径的纯硅MCM-41, 用浸渍法将有超强酸性质的活性中心SO2-4/ZrO2引入其中, 并用XRD, IR和Py-IR等技术对其进行了表征, 并考察了在此催化剂上苯与丙烯气相流动烷基化反应, 对目的反应的催化性能进行了评价.     

MCM-41分子筛的改性、表面结构与吸附性质的研究

用三甲基氯硅烷、二甲基二氯硅烷、甲基三氯硅烷、四氯化硅与甲基碘改性高硅MCM-41中孔分子筛。XRD,^2^9SiMASNMR,^1^3CMASNMR,以及N~2、水与环己烷吸附的表征,显示改性不同程度地改变了分子筛的表面组成与结构,减小孔径,增加孔壁厚度,因而影响吸附行为,减小吸附容量。硅烷化减少了MCM-41的表面硅羟基含量,增加其疏水性。用CH~3I改性使孔径减小1.4nm,而硅羟基含量并未显著减少。硅烷化以及用CH~3I改性可提高MCM-41分子筛的热稳定性。SiCl~4的改性作用相对不明显。样品的水及环己烷吸附容量与其表面硅羟基含量呈现不同的线性关系,揭示高硅MCM-41分子筛表面吸附中心的本性。     

模板剂对全硅MCM-41介孔分子筛结构的影响

分别采用十六烷基三甲基溴化铵和十六烷基三乙基溴化铵作为模板剂,硅溶胶为硅源,用水热晶化法在碱性（NaOH）介质中合成了MCM-41介孔分子筛样品.通过XRD、N2吸附-脱附、TG-DTA、IR等测试手段对这两种样品进行了对比表征分析.考察了两种不同模板剂对其晶体结构、比表面及孔径大小的影响.实验结果表明,相对于十六烷基三甲基溴化铵做模板剂,采用大头基的十六烷基三乙基溴化铵可以合成较大孔径和孔容（分别为4.72 nm和1.14 cm3•g-1）的MCM-41介孔分子筛,而且具有较窄的孔径分布,因此对于合成大孔径的介孔分子筛MCM-41,十六烷基三乙基溴化铵是一种很好的模板剂.     

(MCM-41)-La_2O_3纳米复合材料的制备、表征及光学性质

借助水热法,以正硅酸乙酯为硅源,十六烷基三甲基溴化铵为模板剂,在碱性条件下制备了纳米MCM-41分子筛。通过固相热扩散法将La2O3组装到MCM-41介孔孔道中,制备出含La2O3不同浓度的(MCM-41)-La2O3主-客体纳米复合材料。采用化学分析、粉末XRD、FTIR、77K低温N2吸附-解吸附、固体扩散漫反射吸收光谱、拉曼光谱、扫描电镜和发光光谱对主-客体复合材料进行表征。粉末XRD结果表明,La2O3组装到MCM-41分子筛的孔道后并未破坏分子筛骨架,在所制备的(MCM-41)-La2O3主-客体纳米复合材料中MCM-41骨架结构仍然具有较高的有序性,并且,随着植入客体材料浓度的增加复合材料的有序度有所降低。红外光谱表明所制备的纳米复合材料主体分子筛骨架完好;低温氮气吸附-解吸附技术表明La2O3已经部分地占据了MCM-41分子筛孔道,导致分子筛的比表面积和孔体积都有所降低;固体扩散漫反射吸收光谱表明吸收光谱的吸收峰发生了蓝移现象,并表现出量子限域效应,说明La2O3已经组装到了MCM-41分子筛的孔道中;拉曼光谱表明所制备的复合材料没有出现新的特征峰,表明La2O3已经组装到了MCM-41分子筛的孔道中;扫描电镜表明(MCM-41)-La2O3样品的外观非常规整,主要呈现的是球状结构,La2O3含量为10%时,(MCM-41)-La2O3的平均粒径为(114±10)nm。发光光谱研究结果表明,所制备的复合材料(MCM-41)-La2O3样品在396nm处具有较好的发光性质,因而具有作为发光材料潜在应用前景。     

不同硅铝比的MCM-22分子筛的气相硅烷化处理

对不同硅铝比的MCM-22分子筛进行气相硅烷化处理,并采用X射线衍射、固体核磁、N₂吸附-脱附和甲苯吸附等技术对样品进行了表征. 结果显示,原料硅铝比为50~100的MCM-22分子筛均可以利用气相硅烷化,在不脱除骨架铝的基础上,将Si(OH)₂柱撑结构引入其层间超笼系统,从而使层间距增大,孔体积增加; 将密度泛函理论用于计算硅烷化前后的MCM-22分子筛的N₂吸附等温线,成功得到十元环孔道和超笼体系的比表面积和孔体积,发现气相硅烷化使MCM-22分子筛超笼体系的比表面积和孔体积增大,而十元环孔道减小.另外,气相硅烷化可有效提高不同硅铝比MCM-22分子筛的甲苯平衡吸附量.     

杂原子介孔MCM-41分子筛的制备及其对含喹啉模拟柴油的吸附脱氮性能

制备了介孔MCM-41分子筛和三种杂原子(Zn、Ba和Ce)介孔MCM-41分子筛,通过X射线衍射(XRD)、红外光谱(FT-IR)、低温N_2吸附-脱附等手段对其进行表征,研究了几种介孔分子筛对氮含量为1732μg/g含喹啉模拟柴油的吸附脱氮性能。结果表明,所制备的几种分子筛均具有典型的介孔结构,且杂原子已进入到分子筛骨架中。利用Materials Studio软件构建介孔分子筛模型,模拟的XRD谱图与实验结果基本相符;进一步模拟了喹啉分子在杂原子介孔分子筛团簇上的吸附,计算了吸附能及被吸附分子和吸附中心的距离(d_((N-M)))。几种分子筛的吸附脱氮性能顺序依次为Zn-MCM-41 Ce-MCM-41 Ba-MCM-41 MCM-41;Zn-MCM-41的吸附性能最好,吸附能最大,吸附分子和吸附中心的距离d_((N-M))最小。吸附时间对杂原子介孔分子筛的吸附脱氮性能具有较大影响,而吸附温度的影响相对较小;Zn-MCM-41、Ba-MCM-41和Ce-MCM-41分子筛的最佳吸附时间分别为40、10和30 min,最佳吸附温度分别为40、30和40℃。     

Sm-Al-MCM-41分子筛的合成与表征

以十六烷基三甲基溴化铵为模板剂, Na2Si3O7为硅源,采用水热合成方法制备了双金属Sm-Al-MCM-41介孔分子筛,并用XRD, FT-IR, SEM, TG-DTA等方法对样品进行表征.结果表明该分子筛具有典型的MCM-41介孔分子筛特征.     

一种合成高水热稳定性微孔-介孔复合分子筛β沸石/MCM-41的新方法

首次以β沸石作为硅铝源制备了β沸石/MCM-41微孔-介孔复合分子筛材料，通过XRD、IR、N₂吸附脱附、SEM和水热处理等手段对复合材料进行了表征，并与MCM-41和β沸石及二者的机械混合物的有关性能进行了对比研究。结果表明，复合分子筛明显不同于机械混合物，其水热稳定性远远高于普通方法合成的介孔分子筛，而且发现通过改变体系的n_Na/n_Si比，可以调变复合样品中的微孔、介孔相的相对含量。     

茂锆金属配合物在介孔分子筛MCM-41上的接枝研究

茂锆金属配合物在介孔分子筛MCM-41上共价接技的合成和表征研究，以纯硅的MCM-41为载体，首先用四氯化硅与之反应在MCM-41的表面生成一定量的Cl：Si-OSi(O—Si≡)3基团，然后再用过量的三甲基氯硅烷保护分子筛表面剩余的硅羟基，接下来再让所得材料依次和环戊二烯基钠、正丁基锂、四氯化锆反应，从而通过在同一个反应瓶中经过五步连续合成的方法，得到了二氯二茂锆共价接枝于介孔分子筛MCM-41表面的有机无机复合材料．用XRD、^29Si和^13C MAS NMR、氮气吸附-脱附孔径分析、IR光谱等手段对所得样品进行了表征，并与用担载方法获得的二氯二茂锆固载化于MCM-41之中的样品进行了对比分析研究．     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Cu0-catalysed 1,3-dipolar cycloadditions of α-amino acid derived N,N-cyclic azomethine imines to ynones

A series of 20 CuAIAC reactions between eight 4-acylamino substituted pyrazolidine-3-one-1-azomethine imines and four terminal ynones were performed using Cu⁰ as catalyst. The corresponding fluorescent cycloadducts were obtained in very high yields upon simple workup. Thus, Cu-metal turned out to be a better catalyst than Cu^I in terms of yield and ease of isolation. Availability of azomethine imines, mild reaction conditions, and simple workup enable a “click” access to libraries of densely substituted 2,3-dihydro-1H,5H-pyrazolo[1,2-a]pyrazol-1-ones. Reactivity of differently substituted dipoles was evaluated experimentally and by quantum chemical methods (DFT).     

Synthesis and antioxidative/anti-inflammatory activity of novel fullerene–polyamine conjugates

(E)-4-(Fullerenopyrrolidin-1-yl)-3-methylbut-2-enoic acid and its corresponding succinimidyl ester, readily obtained through Prato-type modification of C₆₀, were used for the selective N-acylation of polyamines. The thus obtained conjugates were evaluated for their antioxidative and anti-inflammatory activity and their cytotoxicity was determined. Members of this family of compounds showed interesting anti-lipid peroxidation, anti-lipoxygenase and anti-inflammatory activity and comparable cytocompatibility to spermidine.