Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟

以CexZr1-xO2固溶体做载体,制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂(x=1,0.75,0.5,0.25,0).应用Brunauer-Emmet-Teller(BET)比表面积分析、X射线衍射(XRD)和H2程序升温还原(H2-TPR)等手段对催化剂进行相关表征,并系统研究了催化剂在饮食油烟催化燃烧中的催化活性.BET结果表叫催化剂的比表面积随Ce/Zr摩尔比的减小而减小.XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上.H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好.催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧,降低了反应温度.随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化,催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2＞Pt/γ-Al2O3/Ce0.25Zr0.75O2＞Pt/γ-Al2O3/Ce0.75Zr0.25O2＞Pt/γ-Al2O3/CeO2＞Pt/γ-Al2O3/ZrO2.     

碳纳米管负载/促进的Mo-Co加氢脱硫催化剂

 以多壁碳纳米管(CNT)为载体制备了负载型Mo-Co/CNT,并将其用于噻吩HDS反应. 结果表明,在n(C4H4S)/n(H2)= 2.3/97.7, GHSV=2200 ml/(g·h),p=0.1 MPa和T=623 K的条件下,在7.2%(Mo-Co)/CNT催化剂上,噻吩HDS的比反应速率可达到0.64·10-3s-1,分别是9.7%(Mo-Co)/γ-Al2O3和16.9%(Mo-Co)/AC催化剂上的1.68和2.28倍. 对比研究结果表明,用CNT代替γ-Al2O3或AC并不引起催化剂上噻吩HDS反应的表观活化能发生明显变化. 与Mo-Co/γ-Al2O3或Mo-Co/AC催化剂相比,一方面,Mo-Co/CNT催化剂更易在较低温度下还原活化,并导致工作态催化剂表层活性Mo物种(Mo4+)在总Mo量中所占比例明显提高; 另一方面,Mo-Co/CNT催化剂对H2具有更强的吸附和活化能力. 这两个因素对提高催化剂活性都有重要贡献.     

纳米膜组装介孔Al2O3：合成及Pt/Al2O3的硝基苯催化加氢性能

以"乙酸乙酯(EA)-偏铝酸钠-水"体系在室温下合成了纳米膜组装介孔Al2O3。研究发现:合成反应时间、静置前搅拌时间、NaAlO2用量、EA用量及反应温度等对合成产物的形貌有影响;另外,与用商品γ-Al2O3制备的Pt/γ-Al2O3催化剂相比,纳米膜组装介孔Al2O3制备的Pt/Al2O3催化剂含有部分易被还原的PtOx物种。在硝基苯催化加氢反应中,用合成Al2O3为载体制备的Pt/Al2O3催化剂,比用商品γ-Al2O3制备的Pt/γ-Al2O3催化剂具有更好的催化活性。     

Pt/γ-Al2O3/CexZr1-xO2催化剂低温催化燃烧去除饮食油烟（英文）

以CexZr1-xO2固溶体做载体,制备了系列Pt/γ-Al2O3/CexZr1-xO2催化剂（x=1,0.75,0.5,0.25,0）.应用Brunauer-Emmet-Teller（BET）比表面积分析、X射线衍射（XRD）和H2程序升温还原（H2-TPR）等手段对催化剂进行相关表征,并系统研究了催化剂在饮食油烟催化燃烧中的催化活性.BET结果表明催化剂的比表面积随Ce/Zr摩尔比的减小而减小.XRD结果表明贵金属Pt很好地分散在氧化铝和CexZr1-xO2固溶体上.H2-TPR结果发现催化剂Pt/γ-Al2O3/Ce0.5Zr0.5O2的还原峰面积最大且氧离子的流动性最好.催化活性研究结果表明Pt负载在CexZr1-xO2固溶体上有利于油烟的催化燃烧,降低了反应温度.随着CexZr1-xO2固溶体中Ce/Zr摩尔比的变化,催化剂的活性顺序为Pt/γ-Al2O3/Ce0.5Zr0.5O2〉Pt/γ-Al2O3/Ce0.25Zr0.75O2〉Pt/γ-Al2O3/Ce0.75Zr0.25O2〉Pt/γ-Al2O3/CeO2〉Pt/γ-Al2O3/ZrO2.     

Ce和Mg改性的γ-Al2O3负载Pt催化剂催化乙二醇水相重整制氢

 采用浸渍法制备了Ce和Mg改性的 γ-Al2O3 负载Pt乙二醇水相重整制氢催化剂. 采用催化活性评价、N2物理吸附、CO化学吸附、X射线衍射(XRD)和程序升温还原(TPR)等手段系统研究了催化剂的活性、选择性及物化性质. 实验结果表明, Ce和Mg改性的 γ-Al2O3 负载Pt催化剂的活性明显高于Pt/γ-Al2O3 催化剂. 在498 K和2.58 MPa条件下,乙二醇的转化率由72.3%提高到100%, 氢的选择性接近100%. 在Pt/(Ce)γ-Al2O3 和Pt/(Mg)γ-Al2O3 催化剂的XRD谱中,除了 γ-Al2O3 特征峰外,还分别出现了CeO2和Mg-Al层状化合物及微弱的Mg-Al尖晶石结构化合物的特征峰. Ce的存在促进了Pt对乙二醇的吸附-裂解作用和CO水煤气变换反应; Mg的存在中和了 γ-Al2O3 表面的酸性,增加了载体的碱性中心,影响了PtCl2-6的分散,抑制了乙二醇的脱水反应.     

Pt-Ir/Al2O3催化剂催化2-氧-4-苯基丁酸乙酯不对称加氢

用浸渍法制备了一系列γ-Al2O3负载的Pt、Ir单金属及不同Pt/Ir比例的双金属催化剂,在辛可尼定修饰下用于对2-氧-4-苯基丁酸乙酯不对称加氢合成(R)-2-羟基-4-苯基丁酸乙酯反应.运用XRD、TEM、TPR、XPS、UV-Vis等表征手段,对催化剂的物化性质进行了研究,并对Pt、Ir金属表面辛可尼定手性诱导机理进行了初步探讨.结果表明,金属组分在催化剂上分散均匀,无团聚现象,平均粒径为3～4 nm;Pt-Ir/γ-Al2O3上Pt、Ir组分以单质形式存在;Ir作为低活性物种,在Pt/γ-Al2O3催化剂掺杂Ir组分遮盖和稀释了催化剂表面总体Pt活性位点数目,降低了Pt-Ir/γ-Al2O3催化剂加氢性能.辛可尼定在Pt、Ir表面的不同吸附行为(吸附方式、吸附强度、吸附构象)影响EOPB不对称加氢活性和对映选择性.     

Na-PtSnCe/γ-Al_2O_3丙烷脱氢催化剂的制备和催化性能

以γ-Al2O3为载体,采用连续等体积浸渍法,制备了一系列不同Na含量的Na-PtSnCe/γ-Al2O3催化剂,结合XRD、Py-IR、H2-TPR和TEM等手段对催化剂进行了表征,讨论了催化剂表面酸性及负载组分与载体之间的相互作用。采用微型催化反应装置考察了碱金属Na助剂含量和焙烧温度对负载型Na-PtSnCe/γ-Al2O3催化剂的丙烷脱氢反应性能的影响。结果表明,Na-PtSnCe/γ-Al2O3催化剂丙烷脱氢性能优于PtSnCe/γ-Al2O3催化剂,最佳Na含量为0.2%;适量Na助剂的添加可以降低催化剂的表面酸,增强催化剂中活性组分与载体之间的界面作用,提高催化反应的稳定性和选择性;550℃焙烧的Na-PtSnCe/γ-Al2O3催化剂,Pt组分与各助剂及载体之间的相互作用得到增强,催化剂具有最佳反应稳定性和最高丙烯选择性。     

乙烷在Pt/γ-Al2O3（001）模型催化剂上吸附行为的理论研究

本文采用密度泛函理论方法和周期性边界条件,考察了Pt原子与γ-Al2O3(001)表面上六种不同位点的相互作用,获得了最稳定吸附位的Pt/γ-Al2O3模型催化剂,建立了Pt原子负载在γ-Al2O3(001)表面的模型催化剂。同时,考查了乙烷分子在Pt/γ-Al2O3模型催化剂上的吸附行为。结果表明,在Pt/γ-Al2O3模型催化剂上,Pt原子转移了部分电子到载体γ-Al2O3。乙烷以分子态形式吸附在Pt/γ-Al2O3模型催化剂上,靠近Pt原子的C-H键受到一定程度地活化。     

HY/MCM-41/γ-Al2O3负载的硫化态Ni-Mo-P催化剂上萘的加氢

 采用水热法合成了不同SiO2/Al2O3比的MCM-41介孔分子筛. 并分别以HY/MCM-41/γ-Al2O3, HY/γ-Al2O3和γ-Al2O3为载体,用浸渍法制备了Mo-Ni-P催化剂. 以萘为模型化合物,考察了硫化态Mo-Ni-P催化剂的加氢活性. 结果表明,不同载体负载的催化剂催化活性均随着活性组分负载量的增大而提高,其中掺杂大比表面MCM-41的HY/MCM-41/γ-Al2O3所负载的催化剂催化活性提高幅度最大. 由于MCM-41与HY分子筛在酸性和孔结构上存在互补性,因而催化剂对萘加氢存在协同作用. 提出了萘加氢的反应机理,认为反应网络包括两个平行路径: 一是萘加氢生成四氢萘后发生异构化或开环反应; 二是萘加氢生成四氢萘后进一步加氢生成十氢萘,继而发生异构化或开环反应.     

BaCO3在γ-Al2O3载体上的分散及其NOx存储性能

 用浸渍法制备了BaCO3-Pt/γ-Al2O3 和Pt-BaCO3/γ-Al2O3 两种样品. X射线衍射和显微红外等表征结果表明, BaCO3可以在载体表面实现单层分散; Pt和BaCO3的负载顺序不同,则BaCO3的分散容量不同. 以1%Pt/γ-Al2O3 为载体制备的 BaCO3-Pt/γ-Al2O3 样品中BaCO3的分散阈值为0.24 g/g. 氮氧化物存储量测试结果表明, BaCO3负载量在分散阈值时, NOx的吸附穿透时间和钡离子的有效利用率均达到最大值,表现出阈值效应. 而在BaCO3/γ-Al2O3 上负载Pt制备的1%Pt-BaCO3/γ-Al2O3 样品中, BaCO3的分散容量降低, 氮氧化物存储量也降低. 分散相的BaCO3在氮氧化合物存储过程中起主要作用,选择钡含量在分散阈值附近并采取先负载Pt后负载BaCO3的制样顺序可以得到吸附能力最强和钡离子有效利用率最高的催化剂.     

α-Amino acid derived enaminones and their application in the synthesis of N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates and other heterocycles

A new and simple synthesis of novel N-protected methyl 5-substituted-4-hydroxypyrrole-3-carboxylates, which exist in equilibrium with their 4-oxo tautomers, has been developed in two steps starting from N-protected α-amino acids. The key intermediates are enaminones, which can also be isolated, characterized, and used for the construction of other functionalized heterocycles, before they spontaneously decompose to pyrrole products. 4-Hydroxypyrroles are prone to partial aerial oxidation but can be efficiently alkylated or reduced to stable polysubstituted pyrrolidine derivatives.     

Specific intramolecular aromatic CH insertion of diazosulfonamides

The chemoselectivity in the intramolecular CH insertion of various diazosulfonamides has been experimentally studied. The results reveal that the aliphatic 1,4-, 1,5-, or 1,6-C(sp³)?H insertions of diazosulfonamides are not accessible, while the aromatic 1,5-C(sp²)?H insertion can be realized specifically by adjusting the diazo-adjacent group. In addition, the general chemoselectivities in the intramolecular CH insertions of diazosulfonyl compounds are summarized. Generally, diazosulfones undergo both aromatic 1,5-C(sp²)?H and aliphatic 1,5- and 1,6-C(sp³)?H insertions, while diazosulfonates undergo aliphatic 1,5- and 1,6-C(sp³)?H insertions. However, diazosulfonamides only undergo aromatic 1,5-C(sp²)?H insertion.     

N-Heterocyclic carbene-palladacyclic complexes: synthesis,characterization and their applications in the C-N coupling and α-arylation of ketones using aryl chlorides

N-Heterocyclic carbene-palladacyclic complexes 3 were successfully achieved in a one-pot procedure under mild conditions. The structure of 3a was unambiguously confirmed by X-ray single crystal diffraction and it was an active catalyst in the Buchwald-Hartwig amination and α-arylation of ketones even at very low catalyst loadings (0.01?mol%).     

Iodine-mediated oxidative Pictet-Spengler reaction using terminal alkyne as the 2-oxoaldehyde surrogate for the synthesis of 1-aroyl-β-carbolines and fused-nitrogen heterocycles

An efficient iodine-mediated oxidative Pictet-Spengler reaction in dimethyl sulphoxide (DMSO) using terminal alkynes as the 2-oxoaldehyde surrogate for the synthesis of aryl (9H-pyrido[3,4-b]indol-1-yl)methanones is described. The scope of the protocol includes the total synthesis of Fascaplysin, Eudistomins Y₁ and Y₂. The methodology is extended for preparing pyrrolo[1,2-a]-quinoxaline and indolo[1,5-a]quinoxaline derivatives. The utility of 1-aroyl-β-carbolines was demonstrated by performing palladium-catalyzed β-carboline directed ortho-C(sp2)-H functionalization of the phenyl ring with thiomethyl (SMe) group using DMSO as source and for accessing 4-aryl-canthin-6-ones.     

Facile synthesis of bicyclic 1-arylpyrazol-5-ones

In this Letter, we described a facile method for constructing fused bicyclic 1-arylpyrazol-5-one ring system. We employed various methylene-containing carboxylic acids as the substrates and proved that the pyrazolone ring closure requires activated methylene group in intermediate II. Accordingly, a series of structurally diversified, fused bicyclic 1-arylpyrazol-5-ones was prepared in moderate to high yields using the requisite substrates.     

A carbanion induced synthesis of highly congested pyrazole and imidazole containing heterocycles

An efficient approach to the synthesis of highly congested di, penta and hexacyclic pyrazoles as well as imidazole fragment containing novel heterocyclic molecule has been developed through a carbanion induced transformation of suitably functionalized 2H-pyran-2-ones, benzo[h]chromene and thiochromeno[4,3-b]pyrans. Due to the presence of fluorescence, we report their prime application metal sensor as off/on switching in ferric ions.     

Synthesis of pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles by Curtius reaction in Morita-Baylis-Hillman derivatives

Synthesis of substituted pyrrolo[1,2-a]pyrazines and pyrazino[1,2-a]indoles from the Morita-Baylis-Hillman derivatives of acrylates via saponification followed by Curtius reaction is described.     

正丁胺对激光染料荧光谱影响的研究

用正丁胺作为碳源,采用射频辉光放电制备碳膜,选用激光染料R6G和聚乙二醇混合液作为蒸气源,采用单源热蒸发,在蒸发室与染料同时沉积得到混合膜,用拉曼光谱和红外光谱分析了碳膜的结构和键合方式,分析表明:碳膜中存在胺基团和氢原子.混合膜的荧光谱测量结果表明,认为正丁胺对染料荧光谱的影响是因为胺基和氢原子的存在.     

Selective synthesis of 4,5-dihydroimidazo- and imidazo[1,5-a]quinoxalines via modified Pictet–Spengler reaction

An efficient tandem approach for the selective synthesis of 4,5-dihydroimidazo[1,5-a]quinoxalines 6a–g and imidazo[1,5-a]quinoxalines 7a–h by the reaction of 2-imidazolyl anilines 4a–c with aryl aldehydes 5a–k under mild reaction conditions is described. Introduction of electron releasing alkyl groups in substrates 4a–b was found to be instrumental for the success of the reaction.     

Understanding the Diels-Alder reactivity of 1,2-azaborine analogues

The Diels-Alder reactivity of 1,2-heteroborines (H₄C₄B(H)X, X?=?NH, PH, AsH; O, S, Se) has been computationally explored by means of Density Functional Theory (DFT) calculations. The influence of the HB?=?X fragment on the reactivity of the system has been quantitatively analyzed in detail by means of the so-called Activation Strain Model (ASM) of reactivity. It is found that the interaction between these species and the dienophile is significantly stronger than that computed for their all-carbon isoelectronic counterpart, benzene. In addition, the strain energy plays a key role in the observed reactivity trends. The role of the aromaticity strength of these heteroarenes on the reactivity is also assessed.