Eu3+在La2O2S中的长余辉发光

The new Eu³⁺ doped lanthanum oxysulfide phosphors,which have the orange-red long afterg low emission,were synthesized by solid-state reaction method.The synthesized phosphors were characterized by X-ray diffraction.The excitation and emission spectra,afterglow spectra and afterglow decay curves were examined.XRD confirmed the phosphor as pure phase La₂O₂S.The phosphors showed typical transitions ⁵D_J(J=0,1) → ⁷J_J(J=0,1,2,3,4)of Eu³⁺.The photoluminescence spectra and afterglow spectra presented the regular alteration with various Eu³⁺ concentration, due to cross relaxation between energy levels of Eu³⁺. In addition, we studied the effects of activator concentration and dopants species on the afterglow property. The data showed afterglow result was the best with 2 % Eu³⁺ and doped with Mg²⁺ and Zr⁴⁺. A prominent phosphorescence can be seen in this phosphor after illuminated with UV light.     

发光材料BaAl2Si2O8∶Eu2+的物相结构与发光性能

A phosphor, Ba_0.97Al₂Si₂O₈∶Eu²⁺, was synthesized by high temperature solid-phase method at different temperatures. The samples were characterized by TG/DTA, XRD and fluorescence spectroscopy. The results show that the main phase for host of these luminescence materials is barium feldspar BaAl₂Si₂O₈∶Eu²⁺ and there is a transition from hexagonal crystal system to monoclinic crystal system in the process of the sintering of barium feldspar. The luminescent phenomen of barium feldspar with hexagonal structure can not be observed under the excitation of ultraviolet lamp of 365 nm while the barium feldspar with monoclinic structure has excellent luminescence properties. The excitation spectra of all these samples show broad band spectra ranging from 250～390 nm with peak at λ_ex of 357 nm,which indicates that these samples can be effectively excited by near ultraviolet ; the emission spectra range from 380～600 nm with peak at λ_em of 433 nm. The luminescent intensity increases then decreases with the concentration of doping Eu²⁺ ions. When the concentration of dopants is 2.5mol%, the luminescent intensity reaches the maximum value. When the concentration of Eu²⁺ ions changes from 0.5mol% to 2.5mol%, the emission peak has a red shift from 427 nm to 440 nm.     

球形La2O3∶Eu纳米晶的制备及其发光特性

The spheric La₂O₃∶Eu nanocrystals were prepared using NH₃·H₂O-NH₄HCO₃ mixture as precipitant. The material was characterized by FTIR, XRD and TEM techniques. The luminescence properties of Eu³⁺ in spheric La₂O₃ were measured by three dimension spectra, emission and excitation spectra. The results indicate that the La₂O₃∶Eu nanocrystals are in hexagonal phase by annealing at 800 ℃, the crystal size is about 30 nm. The maximum emission and excitation wavelength were determined by three dimensional spectroscopy to be at 591 nm and 394 nm, respectively. In emission spectrum the band at 591 nm and 612 nm are corresponding to ⁵D₀-⁷F₁ and ⁵D₀-⁷F₂ transition of Eu³⁺ ions. With increasing in annealing temperature the differences of intensity of the two transitions are increased. This phenomenon shows that the luminescence intensity of La₂O₃∶Eu nanocrystals can be tuned by changing annealing temperature.     

Sr3Al2O6∶Eu2+红色发光纳米晶的新型形貌与发光性能的研究

A red luminescent Sr₃Al₂O₆∶Eu²⁺ nanocrystallites with new morphology were synthesized by sol-gel route assisted by microwave irradiation. The phosphor powders were characterized by X-ray diffraction (XRD)， scanning electron microscopy (SEM) and fluorescence spectroscopy. The results reveal that the calcination temperature of the Sr₃Al₂O₆∶Eu²⁺ phosphor crystallites greatly affects its morphology. With temperature increasing， the phosphor crystallites morphology showed primarily from nanorod-like， mixture of nanorod and flower-like to homogeneous flower-like morphology. The effects of new morphology on luminescent properties of phosphors were investigated. Uniformly dispersed flower-like Sr₃Al₂O₆∶Eu²⁺ phosphor powders showed the strongest luminescent intensity and the longest afterglow time.     

Sr3SiO5∶Eu2+荧光粉的微波合成及性能研究

Silicate orange yellow phosphor used in white-light LED was prepared by microwave method. The structure and optical properties of phosphor were studied. Sr₃SiO₅∶Eu²⁺ phosphor synthesized by microwave method is tetragonal structure of Sr₃SiO₅ with uniform particle distribution. Luminescence spectrum is a broad band spectrum peaking at 575 nm. The peak of excitation is at 532 nm and phosphor can be excited by blue LED. The warm white light was obtained combined phosphor and blue LED. The CIE chromaticity coordinates and correlated color temperature of white light is (x=0.394, y=0.341) and 3 239 K respectively.     

助熔剂法制备的LaMgAl11O19∶Eun+(n=2，3)的发光特性

LaMgAl₁₁O₁₉∶Euⁿ⁺(n=2,3) was synthesized by solid state reaction using H₃BO₃ as a flux at 1 400 ℃ for 4 hours. And their luminescent properties was investigated under UV and VUV excitation. Strong pure blue emission due to d-f transition of Eu²⁺ was observed in LaMgAl₁₁O₁₉∶Eu²⁺ both in 254 nm and 147 nm excitation. At the same time, red emission due to ⁵D₀ → ⁷F_J (J=0, 1, 2, 3, 4) transition of Eu³⁺ also observed in LaMgAl₁₁O₁₉∶Eu³⁺. The dependence of emission intensity of blue/red emission on Eu²⁺ / Eu³⁺-content was evaluated. The result indicated that the blue emission intensity was arrived optimum when Eu²⁺-content was 0.10 mol·mol^-1under both UV and VUV excitation while red emission intensity reached optimum when Eu³⁺-content was 0.125 mol·mol^-1 under UV excitation. This suggests that LaMgAl₁₁O₁₉∶Eu²⁺ phosphors could be potential blue phosphor for the application in PDP.     

球形Gd2O3∶Eu纳米发光材料的制备

Spherical nanometer Gd₂O₃∶Eu luminescent materials were prepared by homogeneous precipitation method, and the properties were studied also. TG, FTIR and XRD analysis showed that the precursor was carbonate, the cubic Gd₂O₃was obtained after calcination. TEM photographs indicated that the samples were spherical and well dispersed with nanometer and submicrometer size of 200～300 nm which is the nanoparticles’ aggregate. The mechanics of agglomerating growth is also discussed. ED photograph showed that the particle was crystalline. The PL analysis exhibited that CTB band of nanometer Gd₂O₃∶Eu was of 17 nm red shift to bulk materials, and the emission peak was broadened due to the surface and interface effect of nanocrystals.     

Eu3+掺杂SiO2-B2O3-NaF玻璃的制备及发光性质

The Eu-doped SiO₂-B₂O₃-NaF glass was prepared by sol-gel process, using tetraethoxy Silicane, boric acid and sodium fluoride as starting materials, 0.10 mol·L^-1 EuCl₃ solution as the dopant. The luminescent properties of Eu³⁺ doped SiO₂-B₂O₃-NaF phosphors were investigated. The phosphors showed prominent luminescence in pink, the strong emission of Eu³⁺ comes from electronic transition of ⁵D₀- ⁷F₁（591 nm）and ⁵D₀- ⁷F₂（615 nm）,which derived from two transition modes of magnetic-dipole and electric-dipole .The peak intensity of 591nm in SiO₂-B₂O₃-NaF matrix is much stronger than it in the other matrixes, it means that SiO₂-B₂O₃-NaF has sensitization on the transition of ⁵D₀- ⁷F₁ (Eu³⁺). If there are broad bonds in the range of 275～380 nm in the excitation spectrum of Eu³⁺ -doped SiO₂-B₂O₃-NaF glass, the emission peak intensity should be intensified. It is because the electron migration CT band of O^2--Eu³⁺. For all Eu³⁺ concentrations used, the investigation found that when the mass of fraction got to 29.19×10^-3, the luminescence intensity reached the summit. And there is a phenomenon of concentration quenching. Investigation with the same concentration of Eu³⁺ at different annealed temperature, we found that the sample annealed at 400 ℃, the luminescence intensity achieved its maximum value, and Eu³⁺ in this matrix had a phenomenon of temperature quenching. The structural characterization of these luminescent materials was carried by used XRD and TEM. The result showed that the phosphor was in amorphous phase.     

自激活白光发射Ba2TiP2O9发光材料的发光特性

The Ba₂TiP₂O₉ phosphor was synthesized via the conventional high-temperature solid-state method. The Ba₂TiP₂O₉ phosphor showed high luminance white-light emitting when excited under 254 nm radiation. Furthermore, obvious long-lasting phosphorescence could be observed when the UV excitation source had been removed. XRD and photoluminescence (PL) spectra as well as the luminance decay were used to characterize the synthesized phosphor. The results of XRD indicated that the products obtained under 1 100 ℃ for 3 h had a good crystallization. Both the PL spectra and luminance decay measurement revealed that this kind of phosphors was a new kind of white-light-emitting phosphor. The thermoluminescence properties have also been investigated. The energy level of the 352 K and 493 K TL peaks have also been calculated and found that their energy level values were 0.35 eV and 1.08 eV, respectively. The 352 K TL peak is responsible for the origin of the long-lasting phosphorescence.     

Eu3+在Ba2TiSi2O8中的发光

The barium titano-silicate phosphors doped with Eu³⁺ were synthesized by high temperature solid state reaction. The structures of as-synthesized samples were characterized by powder XRD. The maximum peaks of emission spectra of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were respectively located at 450 and 618 nm, coming from the transitions of charge-transfer bands of Ti⁴⁺-O^2- and forced electric-dipole transition ⁵D₀-⁷F₂ of Eu³⁺. The luminous mechanisms of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were suggested. The effects of concentration of Eu³⁺ on the luminous performance of Ba₂TiSi₂O₈∶Eu³⁺ were also studied and the results showed that the optimum concentration of Eu³⁺ was 0.12 mol per mole of matrix.     

Volume-based thermodynamics: estimations for 2:2 salts

The lattice energy of an ionic crystal, U(POT), can be expressed as a linear function of the inverse cube root of its formula unit volume (i.e., Vm(-1/3)); thus, U(POT) approximately 2I(alpha/Vm(1/3) + beta), where alpha and beta are fitted constants and I is the readily calculated ionic strength factor of the lattice. The standard entropy, S, is a linear function of Vm itself: S approximately kVm + c, with fitted constants k and c. The constants alpha and beta have previously been evaluated for salts with charge ratios of 1:1, 1:2, and 2:1 and for the general case q:p, while values of k and c applicable to ionic solids generally have earlier been reported. In this paper, we obtain alpha and beta, k and c, specifically for 2:2 salts (by studying the ionic oxides, sulfates, and carbonates), finding that U(POT)[MX 2:2]/(kJ mol(-1)) approximately 8(119/Vm(1/3) + 60) and S degree [MX 2:2]/(J K(-1) mol(-1)) approximately 1382V(m) + 16.     

Luminescent Nitridophosphates CaP2N4:Eu2+, SrP2N4:Eu2+, BaP2N4:Eu2+, and BaSr2P6N12:Eu2+

Nitridophosphates MP₂N₄:Eu²⁺ (M=Ca, Sr, Ba) and BaSr₂P₆N₁₂:Eu²⁺ have been synthesized at elevated pressures and 1100–1300 °C starting from the corresponding azides and P₃N₅ with EuCl₂ as dopant. Addition of NH₄Cl as mineralizer allowed for the growth of single crystals. This led to the successful structure elucidation of a highly condensed nitridophosphate from single‐crystal X‐ray diffraction data (CaP₂N₄:Eu²⁺ (P6₃, no. 173), a=16.847(2), c=7.8592(16) Å, V=1931.7(6) ų, Z=24, 2033 observed reflections, 176 refined parameters, wR₂=0.096). Upon excitation by UV light, luminescence due to parity‐allowed 4f⁶(⁷F)5d¹→4f⁷(⁸S_7/2) transition was observed in the orange (CaP₂N₄:Eu²⁺, λ_max=575 nm), green (SrP₂N₄:Eu²⁺, λ_max=529 nm), and blue regions of the visible spectrum (BaSr₂P₆N₁₂:Eu²⁺ and BaP₂N₄:Eu²⁺, λ_max=450 and 460 nm, respectively). Thus, the emission wavelength decreases with increasing ionic radius of the alkaline‐earth ions. The corresponding full width at half maximum values (2240–2460 cm^?1) are comparable to those of other known Eu²⁺‐doped (oxo)nitrides emitting in the same region of the visible spectrum. Following recently described quaternary Ba₃P₅N₁₀Br:Eu²⁺, this investigation represents the first report on the luminescence of Eu²⁺‐doped ternary nitridophosphates. Similarly to nitridosilicates and related oxonitrides, Eu²⁺‐doped nitridophosphates may have the potential to be further developed into efficient light‐emitting diode phosphors.     

R2 2(8) motifs in Aminopyrimidine sulfonate/carboxylate interactions: Crystal structures of pyrimethaminium benzenesulfonate monohydrate (2:2:1) and 2-amino-4,6-dimethylpyrimidinium sulfosalicylate dihydrate (4:2:2)

Background

The characterization of three types of Marche (Italy) honeys (Acacia, Multifloral, Honeydew) was carried out on the basis of the their quality parameters (pH, sugar content, humidity) and mineral content (Na, K, Ca, Mg, Cu, Fe, and Mn). Pattern recognition methods such as principal components analysis (PCA) and linear discriminant analysis (LDA) were performed in order to classify honey samples whose botanical origins were different, and identify the most discriminant parameters. Lastly, using ANOVA and correlations for all parameters, significant differences between diverse types of honey were examined.

Results

Most of the samples' water content showed good maturity (98%) whilst pH values were in the range 3.50 – 4.21 confirming the good quality of the honeys analysed. Potassium was quantitatively the most relevant mineral (mean = 643 ppm), accounting for 79% of the total mineral content. The Ca, Na and Mg contents account for 14, 3 and 3% of the total mineral content respectively, while other minerals (Cu, Mn, Fe) were present at very low levels. PCA explained 75% or more of the variance with the first two PC variables. The variables with higher discrimination power according to the multivariate statistical procedure were Mg and pH. On the other hand, all samples of acacia and honeydew, and more than 90% of samples of multifloral type have been correctly classified using the LDA. ANOVA shows significant differences between diverse floral origins for all variables except sugar, moisture and Fe.

Conclusion

In general, the analytical results obtained for the Marche honeys indicate the products' high quality. The determination of physicochemical parameters and mineral content in combination with modern statistical techniques can be a useful tool for honey classification.     

F2Al(mu-eta2:eta2-O2)AlF2: an unusual, stable aluminum peroxo compound

The oxidation processes in the industrial production of aluminum from cryolite melts are not fully understood. Oxidation of AlOF2- leads initially to AlOF2 radicals. The structure of the AlOF2 dimer and several oxidized and reduced forms of this compound are investigated by theoretical methods and compared to analogous boron and gallium compounds. The thermodynamic stability of these compounds is investigated. It is shown that the dimeric compound of AlOF2 contains a symmetric peroxo bridge and is unexpectedly stable toward decomposition.     

Iridium complex-catalyzed highly selective cross [2 + 2 + 2] cycloaddition of two different monoynes: 2:1 coupling versus 1:2 coupling

[reaction: see text] Highly selective cross [2 + 2 + 2] cycloaddition of two different monoynes is achieved by using a catalytic amount of [Ir(cod)Cl](2) and ligand. The ligand had a considerable effect on the reaction. When 1,2-bis(diphenylphosphino)ethane was used, two molecules of dimethyl acetylenedicarboxylate (DMAD) reacted with one molecule of a monoyne to give the 2:1 coupling product. When 1,2-bis(dipentafluorophenylphosphino)ethane was used instead of dppe, one molecule of DMAD reacted with two molecules of a monoyne to give the 1:2 coupling product.     

3s-Gd2C2Br2: Eine neue Stapelvariante

3s-Gd₂C₂Br₂: An Isomorph with a New Stacking Sequence Gd₂C₂Br₂ has been described in [1]. Here we describe the new stacking variant 3s-Gd₂C₂Br₂ prepared by reaction of stoichiometric amounts of GdBr₃, Gd, and C at 1 320 K. 3s-Gd₂C₂Br₂ with a stacking sequence different to that described in [1] crystallizes in space group C2/m with lattice constants a = 706.6(2) pm, b = 382.7(1) pm, c = 996.7(4) pm and β = 99.95(3)°. In the structure C₂ units are octahedrally surrounded by Gd atoms. Such Gd₆(C₂) octahedra are condensed via edges to form sheets, which are separated by two layers of Br-ions. In contrast to the modification described previously three slabs BrGd(C₂)GdBr are stacked in [103] direction until identity is reached. The isotypic 3s-Tb₂C₂Br₂ has also been prepared at 1 370 K. It is characterized by the lattice constants a = 701.5(3) pm, b = 380.1(1) pm, c = 994.8(3) pm and β = 100.05°.     

Das erste Gadoliniumcarbidfluorid: Gd2CF2

The First Gadolinium Carbide Fluoride: Gd₂CF₂ Gd₂CF₂, the first gadolinium carbide fluoride is prepared by reaction of stoichiometric amounts of GdF₃, Gd, and C at 1250°C in sealed Ta-capsules. It is isotypic with Gd₂CBr₂ (space group P3 m1; a = 373.11(4) and c = 642.5(1) pm). The Gd atoms surround the C atoms octahedrally. Such Gd₆C octahedra are condensed via edges to form octahedral sheets, which are separated by double slabs of F^?? ions.     

Fluorocarbohydrates—XXVII: 2-deoxy-2-fluoro-l-fucose: synthesis and structure

Addition of CF₃OF to 3,4-di-O-acetyl-l-fucal gave a 95% yield of two di-O-acetyl-2-deoxy-2-fluoro-l-fucosyl derivatives separable by column chromatography, both in crystalline form. The derivatives were identified by ¹H and ¹⁹F-NMR to be the α-fluoride and the α-trifluoromethyl-glycoside. Acidic hydrolysis of either derivative gave the free sugar 2-deoxy-2-fluoro-l-fucose (non-crystalline), further characterised as the crystalline 1,3,4-tri-O-α-acetate.     

R22(8) motifs in Aminopyrimidine sulfonate/carboxylate interactions: Crystal structures of pyrimethaminium benzenesulfonate monohydrate (2:2:1) and 2-amino-4,6-dimethylpyrimidinium sulfosalicylate dihydrate (4:2:2)

Background  

Pyrimethamine [2,4-diamino-5-(p-chlorophenyl)-6-ethylpyrimidine] is an antifolate drug used in anti-malarial chemotherapy. Pyrimidine and aminopyrimidine derivatives are biologically important compounds owing to their natural occurrence as components of nucleic acids.