发光材料BaAl2Si2O8∶Eu2+的物相结构与发光性能

A phosphor, Ba_0.97Al₂Si₂O₈∶Eu²⁺, was synthesized by high temperature solid-phase method at different temperatures. The samples were characterized by TG/DTA, XRD and fluorescence spectroscopy. The results show that the main phase for host of these luminescence materials is barium feldspar BaAl₂Si₂O₈∶Eu²⁺ and there is a transition from hexagonal crystal system to monoclinic crystal system in the process of the sintering of barium feldspar. The luminescent phenomen of barium feldspar with hexagonal structure can not be observed under the excitation of ultraviolet lamp of 365 nm while the barium feldspar with monoclinic structure has excellent luminescence properties. The excitation spectra of all these samples show broad band spectra ranging from 250～390 nm with peak at λ_ex of 357 nm,which indicates that these samples can be effectively excited by near ultraviolet ; the emission spectra range from 380～600 nm with peak at λ_em of 433 nm. The luminescent intensity increases then decreases with the concentration of doping Eu²⁺ ions. When the concentration of dopants is 2.5mol%, the luminescent intensity reaches the maximum value. When the concentration of Eu²⁺ ions changes from 0.5mol% to 2.5mol%, the emission peak has a red shift from 427 nm to 440 nm.     

Eu3+在La2O2S中的长余辉发光

The new Eu³⁺ doped lanthanum oxysulfide phosphors,which have the orange-red long afterg low emission,were synthesized by solid-state reaction method.The synthesized phosphors were characterized by X-ray diffraction.The excitation and emission spectra,afterglow spectra and afterglow decay curves were examined.XRD confirmed the phosphor as pure phase La₂O₂S.The phosphors showed typical transitions ⁵D_J(J=0,1) → ⁷J_J(J=0,1,2,3,4)of Eu³⁺.The photoluminescence spectra and afterglow spectra presented the regular alteration with various Eu³⁺ concentration, due to cross relaxation between energy levels of Eu³⁺. In addition, we studied the effects of activator concentration and dopants species on the afterglow property. The data showed afterglow result was the best with 2 % Eu³⁺ and doped with Mg²⁺ and Zr⁴⁺. A prominent phosphorescence can be seen in this phosphor after illuminated with UV light.     

Eu3+掺杂SiO2-B2O3-NaF玻璃的制备及发光性质

The Eu-doped SiO₂-B₂O₃-NaF glass was prepared by sol-gel process, using tetraethoxy Silicane, boric acid and sodium fluoride as starting materials, 0.10 mol·L^-1 EuCl₃ solution as the dopant. The luminescent properties of Eu³⁺ doped SiO₂-B₂O₃-NaF phosphors were investigated. The phosphors showed prominent luminescence in pink, the strong emission of Eu³⁺ comes from electronic transition of ⁵D₀- ⁷F₁（591 nm）and ⁵D₀- ⁷F₂（615 nm）,which derived from two transition modes of magnetic-dipole and electric-dipole .The peak intensity of 591nm in SiO₂-B₂O₃-NaF matrix is much stronger than it in the other matrixes, it means that SiO₂-B₂O₃-NaF has sensitization on the transition of ⁵D₀- ⁷F₁ (Eu³⁺). If there are broad bonds in the range of 275～380 nm in the excitation spectrum of Eu³⁺ -doped SiO₂-B₂O₃-NaF glass, the emission peak intensity should be intensified. It is because the electron migration CT band of O^2--Eu³⁺. For all Eu³⁺ concentrations used, the investigation found that when the mass of fraction got to 29.19×10^-3, the luminescence intensity reached the summit. And there is a phenomenon of concentration quenching. Investigation with the same concentration of Eu³⁺ at different annealed temperature, we found that the sample annealed at 400 ℃, the luminescence intensity achieved its maximum value, and Eu³⁺ in this matrix had a phenomenon of temperature quenching. The structural characterization of these luminescent materials was carried by used XRD and TEM. The result showed that the phosphor was in amorphous phase.     

水热法制备具有光滑表面的球形Y2O3∶Eu3+发光材料

The spherical Y₂O₃∶Eu³⁺ luminescent particles with size of 0.5～3 μm and smooth surface were synthesized by hydrothermal method. The resulted Y₂O₃∶Eu³⁺ precursors and the calcined particles were characterized by differential thermal analysis (DTA) and thermogravimetric (TG) analysis, X-ray diffraction (XRD), Fourier-transform IR spectroscopy (FTIR), scanning electron microscopy (SEM) and photoluminescence spectra (PL). FTIR, TG-DTA, XRD measurements show that the precursors are crystal with hydroxyl and carbonate group, and the pure cubic yttria is obtained after annealing above 700 ℃. The SEM images indicate that the Y₂O₃∶Eu³⁺ particles are in spherical shape and with smooth surface. PL analysis shows that the particles present characteristic red emission of Eu³⁺.     

球形La2O3∶Eu纳米晶的制备及其发光特性

The spheric La₂O₃∶Eu nanocrystals were prepared using NH₃·H₂O-NH₄HCO₃ mixture as precipitant. The material was characterized by FTIR, XRD and TEM techniques. The luminescence properties of Eu³⁺ in spheric La₂O₃ were measured by three dimension spectra, emission and excitation spectra. The results indicate that the La₂O₃∶Eu nanocrystals are in hexagonal phase by annealing at 800 ℃, the crystal size is about 30 nm. The maximum emission and excitation wavelength were determined by three dimensional spectroscopy to be at 591 nm and 394 nm, respectively. In emission spectrum the band at 591 nm and 612 nm are corresponding to ⁵D₀-⁷F₁ and ⁵D₀-⁷F₂ transition of Eu³⁺ ions. With increasing in annealing temperature the differences of intensity of the two transitions are increased. This phenomenon shows that the luminescence intensity of La₂O₃∶Eu nanocrystals can be tuned by changing annealing temperature.     

Sr3Al2O6∶Eu2+红色发光纳米晶的新型形貌与发光性能的研究

A red luminescent Sr₃Al₂O₆∶Eu²⁺ nanocrystallites with new morphology were synthesized by sol-gel route assisted by microwave irradiation. The phosphor powders were characterized by X-ray diffraction (XRD)， scanning electron microscopy (SEM) and fluorescence spectroscopy. The results reveal that the calcination temperature of the Sr₃Al₂O₆∶Eu²⁺ phosphor crystallites greatly affects its morphology. With temperature increasing， the phosphor crystallites morphology showed primarily from nanorod-like， mixture of nanorod and flower-like to homogeneous flower-like morphology. The effects of new morphology on luminescent properties of phosphors were investigated. Uniformly dispersed flower-like Sr₃Al₂O₆∶Eu²⁺ phosphor powders showed the strongest luminescent intensity and the longest afterglow time.     

助熔剂法制备的LaMgAl11O19∶Eun+(n=2，3)的发光特性

LaMgAl₁₁O₁₉∶Euⁿ⁺(n=2,3) was synthesized by solid state reaction using H₃BO₃ as a flux at 1 400 ℃ for 4 hours. And their luminescent properties was investigated under UV and VUV excitation. Strong pure blue emission due to d-f transition of Eu²⁺ was observed in LaMgAl₁₁O₁₉∶Eu²⁺ both in 254 nm and 147 nm excitation. At the same time, red emission due to ⁵D₀ → ⁷F_J (J=0, 1, 2, 3, 4) transition of Eu³⁺ also observed in LaMgAl₁₁O₁₉∶Eu³⁺. The dependence of emission intensity of blue/red emission on Eu²⁺ / Eu³⁺-content was evaluated. The result indicated that the blue emission intensity was arrived optimum when Eu²⁺-content was 0.10 mol·mol^-1under both UV and VUV excitation while red emission intensity reached optimum when Eu³⁺-content was 0.125 mol·mol^-1 under UV excitation. This suggests that LaMgAl₁₁O₁₉∶Eu²⁺ phosphors could be potential blue phosphor for the application in PDP.     

稀土红色荧光粉SrZnO2∶Eu3+的发光性能

A series of novel luminescent materials, SrZnO₂∶M (M=Eu³⁺, or Eu³⁺ + Li⁺) have been synthesized by high-temperature solid-state reaction. The structure and luminescence properties of SrZnO₂∶Eu³⁺ phosphor were studied through XRD, photoluminescence and Raman spectroscopy. The excitation spectra show a broad intense band and a number of small peaks corresponding to the inner 4f-shell excitations of Eu³⁺ (the strongest one is at 395 nm for ⁷F₀-⁵L₆). After SrZnO₂∶Eu³⁺ phosphor was co-doped with Li⁺ ions, its charge transfer band extended to longer wavelengths. This resulted in increase of luminescent quantum efficiency of the sample. SrZnO₂∶Eu³⁺,Li⁺ phosphor can be efficiently excited by longer UV. From the fluorescence spectrum of SrZnO₂∶Eu³⁺ phosphor, apart from transition emissions of ⁵D₀→ ⁷F_J (J=0～4), the transition emissions from ⁵D₁ → ⁷F_J (J=0～2) have been observed. For the SrZnO₂∶Eu³⁺ phosphor, under excitation of UV, the dominant emission is at about 612 nm, due to the ⁵D₀→ ⁷F₂ hypersensitive transition. The incorporation of Li⁺ ions greatly enhanced the luminescence intensity and made emission peak from ⁵D₀ → ⁷F₂ transition red-shifted.     

Si5P6O25∶Tb3+的结构与荧光性质

Tb³⁺ ions were incorporated in P-Si matrix material through a sol-gel process. Luminescence properties of Tb³⁺ as a function of dopant， firing temperature， composition and structure of matrices were investigated. The gels synthesized by the reaction of P₂O₅ or H₃PO₄ with tetraethoxy silane and TbCl₃ as dopant were fired in air from the temperature 25～1000℃ to form P-Si crystalline phase. The crystal structure was determined by powder X-ray diffraction. Si₅O(PO₄)₆ were the only crystalline phase and belong to hexagonal crystal system. The emission of ⁵D₄-⁷F₅(～545nm) transition of Tb³⁺ in the P-Si system is composed of two peaks. The amount of doping Tb³⁺ varied from 0.664% to 1.644%， and no obvious concentration quenching was observed in this doping concentra-tion range. The intensity of Tb³⁺ emission increased with firing temperature increasing and becomes stable at 800～1000℃.     

一维Y2O3∶Eu3+纳米发光材料的制备与表征

One-dimensional Y₂O₃∶Eu³⁺ luminescence nanomaterials were prepared by hydrothermal method without template, and their properties were characterized. XRD patterns show that the precursors are hexagonal phase Y(OH)₃ crystals, and the samples are cubic Y₂O₃ after heat-treatment. SEM images indicate that the one-dimensional material with a diameter of 100 nm and length of micrometer scale can be obtained by this hydrothermal method. Photoluminescence properties show that the position and intensity of the precursors are different with that of the heat-treated samples resulted from the different hosts.     

One-step synthesis of pentavalent triphenylantimony derivatives Ph3Sb(OSiR3)2, Ph3Sb(OCH2CH2)2NH and Ph3Sb(OCH2CH2NMe2)2: X-ray molecular structure of Ph3Sb(OSiMe3)2

Pentavalent bis(triorganosiloxy)triphenylantimony derivatives, Ph₃Sb(OSiR₃)₂ (R = Me, Ph), were synthesized by reaction of triphenylantimony with trimethyl- or triphenylsilanol in the presence of tert-butylhydroperoxide by the mild reaction conditions (0-5 °C, 2 h). The reaction of triphenylantimony with diethanolamine in the presence of tert-butylhydroperoxide gave the cyclic compound Ph₃Sb(OCH₂CH₂)₂NH. The mixture of Ph₃SbO and Ph₃Sb(OCH₂CH₂NMe₂)₂ was obtained by the reaction of triphenylantimony with 2-(N,N-dimethylamino)ethanol in the presence of tert-butylhydroperoxide.     

Eu3+-Tb3+共掺杂SiO2-B2O3-Na2O-Y2O3-P2O5玻璃陶瓷的制备与发光性能

采用高温熔融法制备Eu3+?Tb3+共掺杂SiO2?B2O3?Na2O?Y2O3?P2O5前驱体玻璃。对前驱体玻璃粉末进行差示扫描量热(DSC)分析,确定玻璃陶瓷样品的热处理温度。前驱体玻璃热处理后,采用X射线衍射(XRD)和扫描电镜(SEM)分析可知前驱体玻璃中有Na3.6Y1.8(PO4)3晶粒析出。利用荧光光谱对玻璃陶瓷样品的发光性能进行表征,同时分析了Tb3+离子的荧光衰减曲线,确定Eu3+、Tb3+离子的发光机理以及能量传递过程。通过对Eu3+?Tb3+共掺杂玻璃陶瓷样品的发射光谱采集并用色坐标软件和色温计算程序,获得玻璃陶瓷样品的色坐标和相关色温。     

复合催化剂上CO2加氢合成C2烃类

介绍了由CO₂+H₂合成C2⁺烃的几种复合催化剂体系的研究进展，比较和评价了复合催化剂体系的活性和选择性及对C2⁺烃类生成的影响。着重于复合催化剂体系对C4⁺烃的生成及产物分布的影响并简述反应机理。     

Er~(3+)-Yb~(3+)双掺Li_2O-ZnO-SiO_2系透明玻璃陶瓷的制备及表征

采用熔融-晶化技术合成了Er3+-Yb3+掺杂的Li2O-ZnO-SiO2系(LZS)透明玻璃陶瓷。利用DTA,XRD,SEM,UV-Vis-NIR等对样品进行了表征,并分析了影响玻璃陶瓷析晶的因素。结果表明,LZS系玻璃具有良好的结晶性能,其最佳热处理温度为700℃,最佳热处理时间为50min,其主晶相为石英和Li8Zn10Si7O28。该玻璃陶瓷在可见光区的透过率可达85%。经SEM分析,粒子直径为30~40nm。荧光光谱显示,玻璃陶瓷的发射光谱较之基质玻璃有了极大的提高,而且在1530nm附近获得一较强发射峰。     

试验优化设计Er3+-Yb3+共掺杂Gd2Ti2O7上转换发光特性

采用溶胶-凝胶（Sol-gel）法制备了Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末,通过试验优化设计的理论建立了Er³⁺-Yb³⁺掺杂浓度与发光强度的回归方程,利用遗传算法优化计算出方程的最优解Er³⁺、Yb³⁺掺杂浓度分别为5.60%（物质的量分数）和13.43%。Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇纳米晶粉末为单一面心立方Gd₂Ti₂O₇相结构,随Yb³⁺共掺杂浓度增加,X射线衍射峰逐渐向高角偏移。在976 nm激光激发下,Er³⁺-Yb³⁺共掺杂Gd₂Ti₂O₇获得了分别对应于Er³⁺的²H_11/2/⁴S_3/2→⁴I_15/2和⁴F_9/2→⁴I_15/2跃迁的绿色和红色上转换发光,且绿色和红色发光均为双光子吸收过程。研究了最优样品上转换发光与温度之间的关系,发现绿色上转换发光具有优良的温度传感特性,对红色上转换发光的温度猝灭进行了解释。     

Revisiting Y2Si2O7 and Y2SiO5 polymorphic structures by Y MAS-NMR spectroscopy

This paper describes the ⁸⁹Y MAS-NMR spectra for all the established polymorphs of Y₂Si₂O₇ (y, α, β, γ and δ) and Y₂SiO₅ (X1 and X2). The combination of our spectroscopic data with the structural information published up to now from diffraction data permits the revision and correction of mistakes which appear in the literature. Finally, the influence of different structural factors, such as yttrium coordination number and Y-O distances on the ⁸⁹Y NMR isotropic chemical shift is analyzed.     

Ni2+掺杂Ti/SnO2-Sb2O5电极的制备及性能

采用溶胶凝胶法制备了Ni2+掺杂的Ti/SnO2-Sb2O5电极,并通过XRD、SEM、EDS、苯酚降解、加速寿命实验等技术手段,研究了Ni2+的掺杂对电极的结构、形貌、电催化性能及稳定性的影响。结果表明:Ni2+的掺入细化了SnO2晶粒,增大了电极的比表面积,改善了电极表面的龟裂程度,提高了电极的导电性能;相对于Ti/SnO2-Sb2O5电极Ni2+的掺入将苯酚完全降解的时间缩短为原来的40%,将电极的使用寿命提高为原来的4.8倍。     

The actual structure of K6(VO)2(V2O3)2(PO4)4(P2O7): Ordered distribution of P2O7 groups and charge ordering of vanadium

The actual structure of the vanadium phosphate K₆(VO)₂(V₂O₃)₂(PO₄)₄(P₂O₇) has been determined, using a much larger single crystal than previously used for the isostructural Rb-phase. The actual supercell is four times larger than the corresponding orthorhombic subcell with , , , α=β=γ=90°. The structure resolution, performed in the triclinic space group C-1, shows that the P₂O₇ groups alone are responsible for the superstructure, all the other atoms keeping the atomic positions of the orthorhombic subcell. This structural study shows a perfect ordering of the P₂O₇ groups in the actual structure, in contrast to the results obtained from the subcell. Concomitantly, the V⁴⁺ and V⁵⁺ are found to be ordered in the form of [110] stripes.     

Cd3Al2Ge3O12:Mn2+磷光体的发光和长余辉性能

采用传统的高温固相法合成了Cd₃Al₂Ge₃O₁₂:Mn²⁺长余辉发光材料,利用X射线粉末衍射仪、荧光光谱仪、热释光谱计量仪等手段对粉末样品进行了表征。研究了以Zr⁴⁺离子作为辅助激活剂离子,对发光材料Cd₃Al₂Ge₃O₁₂:Mn²⁺余辉性能的影响。分析结果表明,样品位于500~700 nm的黄光宽带发射峰源于Mn²⁺的⁴T₁(⁴G)→⁶A₁(⁶S)跃迁发射结果。并且观察到了由Cd₃Al₂Ge₃O₁₂基质向激活剂离子Mn²⁺的能量传递。共掺杂Zr⁴⁺离子后样品发射峰位没有明显变化,但是余辉亮度衰减曲线表明适量的Zr⁴⁺离子掺杂可延长Cd₃Al₂Ge₃O₁₂:Mn²⁺的余辉时间。通过对热释光谱的分析,解释了双掺杂荧光粉余辉性能增强的原因,Zr⁴⁺的掺杂在材料中引入了深度更为合适的缺陷陷阱,可有效存储光能,增强余辉的时间和强度。     

Cd3Al2Ge3O12: Mn2+磷光体的发光和长余辉性能

采用传统的高温固相法合成了Cd₃Al₂Ge₃O₁₂: Mn²⁺长余辉发光材料, 利用X射线粉末衍射仪、荧光光谱仪、热释光谱计量仪等手段对粉末样品进行了表征。研究了以Zr⁴⁺离子作为辅助激活剂离子, 对发光材料Cd₃Al₂Ge₃O₁₂: Mn²⁺余辉性能的影响。分析结果表明, 样品位于500~700 nm的黄光宽带发射峰源于Mn²⁺的⁴T₁(⁴G)→⁶A₁(⁶S)跃迁发射结果。并且观察到了由Cd₃Al₂Ge₃O₁₂基质向激活剂离子Mn²⁺的能量传递。共掺杂Zr⁴⁺离子后样品发射峰位没有明显变化, 但是余辉亮度衰减曲线表明适量的Zr⁴⁺离子掺杂可延长Cd₃Al₂Ge₃O₁₂: Mn²⁺的余辉时间。通过对热释光谱的分析, 解释了双掺杂荧光粉余辉性能增强的原因, Zr⁴⁺的掺杂在材料中引入了深度更为合适的缺陷陷阱, 可有效存储光能, 增强余辉的时间和强度。