Eu3+在Ba2TiSi2O8中的发光

The barium titano-silicate phosphors doped with Eu³⁺ were synthesized by high temperature solid state reaction. The structures of as-synthesized samples were characterized by powder XRD. The maximum peaks of emission spectra of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were respectively located at 450 and 618 nm, coming from the transitions of charge-transfer bands of Ti⁴⁺-O^2- and forced electric-dipole transition ⁵D₀-⁷F₂ of Eu³⁺. The luminous mechanisms of Ba₂TiSi₂O₈ and Ba₂TiSi₂O₈∶Eu³⁺ were suggested. The effects of concentration of Eu³⁺ on the luminous performance of Ba₂TiSi₂O₈∶Eu³⁺ were also studied and the results showed that the optimum concentration of Eu³⁺ was 0.12 mol per mole of matrix.     

Eu3+掺杂SiO2-B2O3-NaF玻璃的制备及发光性质

The Eu-doped SiO₂-B₂O₃-NaF glass was prepared by sol-gel process, using tetraethoxy Silicane, boric acid and sodium fluoride as starting materials, 0.10 mol·L^-1 EuCl₃ solution as the dopant. The luminescent properties of Eu³⁺ doped SiO₂-B₂O₃-NaF phosphors were investigated. The phosphors showed prominent luminescence in pink, the strong emission of Eu³⁺ comes from electronic transition of ⁵D₀- ⁷F₁（591 nm）and ⁵D₀- ⁷F₂（615 nm）,which derived from two transition modes of magnetic-dipole and electric-dipole .The peak intensity of 591nm in SiO₂-B₂O₃-NaF matrix is much stronger than it in the other matrixes, it means that SiO₂-B₂O₃-NaF has sensitization on the transition of ⁵D₀- ⁷F₁ (Eu³⁺). If there are broad bonds in the range of 275～380 nm in the excitation spectrum of Eu³⁺ -doped SiO₂-B₂O₃-NaF glass, the emission peak intensity should be intensified. It is because the electron migration CT band of O^2--Eu³⁺. For all Eu³⁺ concentrations used, the investigation found that when the mass of fraction got to 29.19×10^-3, the luminescence intensity reached the summit. And there is a phenomenon of concentration quenching. Investigation with the same concentration of Eu³⁺ at different annealed temperature, we found that the sample annealed at 400 ℃, the luminescence intensity achieved its maximum value, and Eu³⁺ in this matrix had a phenomenon of temperature quenching. The structural characterization of these luminescent materials was carried by used XRD and TEM. The result showed that the phosphor was in amorphous phase.     

一维Y2O3∶Eu3+纳米发光材料的制备与表征

One-dimensional Y₂O₃∶Eu³⁺ luminescence nanomaterials were prepared by hydrothermal method without template, and their properties were characterized. XRD patterns show that the precursors are hexagonal phase Y(OH)₃ crystals, and the samples are cubic Y₂O₃ after heat-treatment. SEM images indicate that the one-dimensional material with a diameter of 100 nm and length of micrometer scale can be obtained by this hydrothermal method. Photoluminescence properties show that the position and intensity of the precursors are different with that of the heat-treated samples resulted from the different hosts.     

一种黄绿光LED用荧光粉：Ga2S3∶Eu2+

Eu²⁺-activated Ga₂S₃ phosphors were synthesized by solid-state reaction and their luminescence properties were studied with diffuse reflection spectroscopy, excitation spectra, emission spectra and fluorescence lifetime. The parameters of LED manufactured with phosphors Ga₂S₃∶Eu²⁺ were measured. The excitation spectra of these phosphors are broadband and can be matched with the emission wavelength of GaN chip.     

稀土红色荧光粉SrZnO2∶Eu3+的发光性能

A series of novel luminescent materials, SrZnO₂∶M (M=Eu³⁺, or Eu³⁺ + Li⁺) have been synthesized by high-temperature solid-state reaction. The structure and luminescence properties of SrZnO₂∶Eu³⁺ phosphor were studied through XRD, photoluminescence and Raman spectroscopy. The excitation spectra show a broad intense band and a number of small peaks corresponding to the inner 4f-shell excitations of Eu³⁺ (the strongest one is at 395 nm for ⁷F₀-⁵L₆). After SrZnO₂∶Eu³⁺ phosphor was co-doped with Li⁺ ions, its charge transfer band extended to longer wavelengths. This resulted in increase of luminescent quantum efficiency of the sample. SrZnO₂∶Eu³⁺,Li⁺ phosphor can be efficiently excited by longer UV. From the fluorescence spectrum of SrZnO₂∶Eu³⁺ phosphor, apart from transition emissions of ⁵D₀→ ⁷F_J (J=0～4), the transition emissions from ⁵D₁ → ⁷F_J (J=0～2) have been observed. For the SrZnO₂∶Eu³⁺ phosphor, under excitation of UV, the dominant emission is at about 612 nm, due to the ⁵D₀→ ⁷F₂ hypersensitive transition. The incorporation of Li⁺ ions greatly enhanced the luminescence intensity and made emission peak from ⁵D₀ → ⁷F₂ transition red-shifted.     

Eu3+在La2O2S中的长余辉发光

The new Eu³⁺ doped lanthanum oxysulfide phosphors,which have the orange-red long afterg low emission,were synthesized by solid-state reaction method.The synthesized phosphors were characterized by X-ray diffraction.The excitation and emission spectra,afterglow spectra and afterglow decay curves were examined.XRD confirmed the phosphor as pure phase La₂O₂S.The phosphors showed typical transitions ⁵D_J(J=0,1) → ⁷J_J(J=0,1,2,3,4)of Eu³⁺.The photoluminescence spectra and afterglow spectra presented the regular alteration with various Eu³⁺ concentration, due to cross relaxation between energy levels of Eu³⁺. In addition, we studied the effects of activator concentration and dopants species on the afterglow property. The data showed afterglow result was the best with 2 % Eu³⁺ and doped with Mg²⁺ and Zr⁴⁺. A prominent phosphorescence can be seen in this phosphor after illuminated with UV light.     

Sr3Al2O6∶Eu2+红色发光纳米晶的新型形貌与发光性能的研究

A red luminescent Sr₃Al₂O₆∶Eu²⁺ nanocrystallites with new morphology were synthesized by sol-gel route assisted by microwave irradiation. The phosphor powders were characterized by X-ray diffraction (XRD)， scanning electron microscopy (SEM) and fluorescence spectroscopy. The results reveal that the calcination temperature of the Sr₃Al₂O₆∶Eu²⁺ phosphor crystallites greatly affects its morphology. With temperature increasing， the phosphor crystallites morphology showed primarily from nanorod-like， mixture of nanorod and flower-like to homogeneous flower-like morphology. The effects of new morphology on luminescent properties of phosphors were investigated. Uniformly dispersed flower-like Sr₃Al₂O₆∶Eu²⁺ phosphor powders showed the strongest luminescent intensity and the longest afterglow time.     

水热法制备具有光滑表面的球形Y2O3∶Eu3+发光材料

The spherical Y₂O₃∶Eu³⁺ luminescent particles with size of 0.5～3 μm and smooth surface were synthesized by hydrothermal method. The resulted Y₂O₃∶Eu³⁺ precursors and the calcined particles were characterized by differential thermal analysis (DTA) and thermogravimetric (TG) analysis, X-ray diffraction (XRD), Fourier-transform IR spectroscopy (FTIR), scanning electron microscopy (SEM) and photoluminescence spectra (PL). FTIR, TG-DTA, XRD measurements show that the precursors are crystal with hydroxyl and carbonate group, and the pure cubic yttria is obtained after annealing above 700 ℃. The SEM images indicate that the Y₂O₃∶Eu³⁺ particles are in spherical shape and with smooth surface. PL analysis shows that the particles present characteristic red emission of Eu³⁺.     

Sr2Si5N8∶Eu2+荧光粉的制备与发光性能

以α-Si₃N₄,SrCO₃,Eu₂O₃为原料,采用碳热还原氮化法制备了Sr₂Si₅N₈∶Eu²⁺荧光粉。研究了材料的结构与光谱特性,分析了影响材料发光性能的工艺因素。结果表明,石墨粉含量和助熔剂的用量对Sr₂Si₅N₈相的形成和发光性能有重要影响。当n_C/n_Sr=1.5,助熔剂用量为4wt%时,合成样品的主晶相为正交晶系Sr₂Si₅N₈,在400~550 nm可见光激发下,可发射峰值波长位于609 nm荧光。激发带的位置与Eu²⁺离子浓度无关,为400~550 nm之间的宽带激发;但发射强度随Eu²⁺离子浓度的增加而增加,Eu²⁺离子浓度达到5mol%时发射强度达最大值,在Eu²⁺离子浓度为2mol%~5mol%之间,观察到发射峰的红移现象。     

Si5P6O25∶Tb3+的结构与荧光性质

Tb³⁺ ions were incorporated in P-Si matrix material through a sol-gel process. Luminescence properties of Tb³⁺ as a function of dopant， firing temperature， composition and structure of matrices were investigated. The gels synthesized by the reaction of P₂O₅ or H₃PO₄ with tetraethoxy silane and TbCl₃ as dopant were fired in air from the temperature 25～1000℃ to form P-Si crystalline phase. The crystal structure was determined by powder X-ray diffraction. Si₅O(PO₄)₆ were the only crystalline phase and belong to hexagonal crystal system. The emission of ⁵D₄-⁷F₅(～545nm) transition of Tb³⁺ in the P-Si system is composed of two peaks. The amount of doping Tb³⁺ varied from 0.664% to 1.644%， and no obvious concentration quenching was observed in this doping concentra-tion range. The intensity of Tb³⁺ emission increased with firing temperature increasing and becomes stable at 800～1000℃.     

Thermal investigations of nitrate-hydrates and deuterates of Ca2+, Cd2+ and Mg2+

DTA and DSC were used to study the thermal behaviour of Ca(NO₃)₂·4H₂O, Cd(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O and their deuterated analogues. Evidence was found concerning the process of melting of the initial hydrates and deuterates, followed by a one-stage dehydration of the melt to vield the respective anhydrous salt. T _m, ΔH _m ^o , ΔS _m ^o and ΔH _deh ^o were determined and the ΔH _f ^o values for the investigated hydrates were calculated from the ΔH _deh ^o data.

---

Zusammenfassung DTA und DSC wurden zur Untersuchung des thermischen Verhaltens von Ca(NO₃)₂·4H₂O, Cd(NO₃)₂·4H₂O, Mg(NO₃)₂·6H₂O und ihrer deuterierten Analoge eingesetzt. Man fand Aussagen bezüglich des Schmelzvorganges der Ausgangshydrate und Deuterate, gefolgt von einer Einschritt-Dehydratation der Schmelze unter Bildung der entsprechenden wasserfreien Salze. T _m, ΔH _m ^o , ΔS _m ^o und ΔH _deh ^o wurden ermittelt und die ΔH _f ^o Werte für die untersuchten Hydrate wurden anhand der ΔH _deh ^o berechnet.

     

The preparation and analysis of fluoro-polyphosphates by F, P, 2D F-P HETCOR and 2D P-P COSY NMR

A complex mixture of fluoro-polyphosphates (FPPs) and polyphosphates was prepared by heating a mixture of NaF and sodium tripolyphosphate (STPP) at 600 °C in nitrogen atmosphere. Two-dimensional ³¹P-¹⁹F heteronuclear correlation spectroscopy (HETCOR) NMR was developed in identifying the atomic connection between F and P in the mixed FPPs. ¹⁹F, ³¹P and ³¹P-³¹P correlation spectroscopy (COSY) NMR methods were employed to identify the components of the mixture and measure the chain length of each FPP ingredient. NMR results clearly demonstrated that the mixture contains four kinds of fluoro-phosphates with different chain length of polyphosphate, which are monofluoro-phosphate (MFP), monofluoro-dipolyphosphate (MFDPP), monofluoro-tripolyphosphate (MFTPP) and difluoro-tripolyphosphate (DFTPP). Other phosphates and polyphosphates also were found in the mixture.     

A highly selective visual and fluorescent sensor for Pb2+ and Zn2+ and crystal structure of Cu2+ complex based-on a novel single-armed Salamo-type bisoxime

A novel single-armed Salamo-type bisoximes (H₄L) has been designed and synthesised. An obvious colour change from yellow (H₄L) to pale pink (HL-Pb²⁺) which can be visually observed by the naked eye in visible light. H₄L can act as a fluorescent sensor for ratiometric recognition of Zn²⁺ with high selectivity and sensitivity. Crystallographic data of the [Cu(HL)(μ-OAc)Cu] reveals that the two Cu²⁺ ions are both penta-coordinated with square pyramidal geometries, and forms a 2D supramolecular plane structure by hydrogen bonding interactions.     

Graphene quantum dots with Zn2+ and Ni2+ conjugates can cleave supercoiled DNA

Graphene quantum dots (GQDs), inheriting the superb property of graphene oxide, possess smaller lateral size and high biocompatibility, thus having potential in biomedical applications. We previously discovered that GQDs, combining with Cu²⁺ ions, could cleave DNA primarily through an oxidative pathway; yet, oxidative DNA cleavage is not practically preferred in biology. In this work, we explore the DNA cleavage ability of GQDs with Zn²⁺ and Ni²⁺. Zn²⁺ and Ni²⁺ alone are incapable of cleaving supercoiled DNA, but when combining with the GQDs, Zn²⁺ and Ni²⁺ exhibit DNA cleavage activity. However, the activity of these two systems is much lower than that of GQDs/Cu²⁺, and GQDs/Ni²⁺ is less active than GQDs/Zn²⁺. The functional mechanism of GQDs/Ni²⁺ and GQDs/Zn²⁺ is different from that of GQDs/Cu²⁺. The GQDs play a key role in the two systems; the redox inactive Zn²⁺ and Ni²⁺ ions assist to generate the oxidative species that eventually lead to the DNA cleavage. The current results together with our previous result indicate that GQDs together with metal ions can cleave supercoiled DNA, and their cleavage activities depend on the properties of metal ions: for redox active metal ions, metal ions play key roles, for redox inactive metal ions, GQDs are dominant.     

Determination Co2+ in vitamin B12 based on enhancement of 2-(4-substituted-phenyl)-4,5-di(2-furyl) imidazole and H2O2 chemiluminescence reaction

In this paper, three kinds of imidazole derivatives, 2-(4-methylphenyl)-4,5-di(2-furyl) imidazole (MDFI), 2-(4-nitrophenyl)-4,5-di(2-furyl) imidazole (NDFI), and 2-(4-tert-butylphenyl)-4,5-di(2-furyl) imidazole (t-BDFI) were synthesized. In an alkaline medium, the chemiluminescence (CL) reaction of imidazole derivatives with H₂O₂ has been investigated. It was also found that MDFI/H₂O₂ and t-BDFI/H₂O₂ systems gave strong CL. When Co²⁺ was added into the two CL systems, the CL intensity was remarkably enhanced. In the optimum conditions, the CL intensity is linearly related to the logarithm of concentration of Co²⁺. The linear ranges are 5 × 10⁻⁹–2.5 × 10⁻⁷ mol/L for MDFI/H₂O₂ system and 5 × 10⁻⁹–2.5 × 10⁻⁷ mol/L for t-BDFI/H₂O₂ system, and the corresponding detection limits are 1.2 × 10⁻⁹ mol/L and 1.1 × 10⁻⁹ mol/L, respectively. The method was applied to the determination of Co²⁺ in vitamin B₁₂ injection. Furthermore, the CL mechanism was also discussed.     

Boron coordination compounds derived from 2-phenyl-benzimidazole and 2-phenyl-benzotriazole bidentate ligands

The syntheses and structural analyses of a series of boron heterocycles derived from 2-(1H-benzimidazol-2-yl)-phenylamine (1), 2-(1H-benzimidazol-2-yl)-phenol (2), 2-(1H-benzimidazol-2-yl)-benzenedisulfide (3), 2-[3-(1,1,1,3,-tetramethyl-butyl)-phenyl]-2H-benzotriazole (4), 2-[3,5-bis-(1-methyl-1-phenylethyl)-phenyl]-2H-benzotriazole (5) and (C₆H₅)₂BOH or BF₃·OEt₂ are reported. The new boron compounds: diphenyl-[2-(1H-benzimidazol-2-yl-κN)-phenylamide-κN]-boron (6), diphenyl-[2-(1H-benzimidazol-2-yl-κN)-phenolate-κO]-boron (7), diphenyl-[2-(1H-benzimidazol-2-yl-κN)-benzenethiolate-κS]-boron (8), diphenyl-[2-(2H-benzotriazol-2-yl-κN)-4-(1,1,3,3-tetramethyl-butyl)-phenolate-κO]-boron (9), diphenyl-[2-(2H-benzotriazol-2-yl-κN)-4,6-(1-methyl-1-phenylethyl)-phenolate-κO]-boron (10), difluoro-[2-(1H-benzimidazol-2-yl-κN)-phenolate-κO]-boron (11), difluoro-[2-(2H-benzotriazol-2-yl-κN)-4-(1,1,3,3-tetramethylbutyl)-phenolate-κO]-boron (12) and difluoro-[2-(2H-benzotriazol-2-yl-κN)-4,6-(1-methyl-1-phenylethyl)-phenolate-κO]-boron (13) have four fused rings, with boron included in a six-membered ring and bound to N, O or S atoms and strongly coordinated by a nitrogen atom from the imidazole or triazole rings. Their structures are zwitterionic, with a negative charge on the boron and a delocalized positive charge on the ligand. Compounds 6-12 were studied by NMR, IR, mass spectrometry, and 6-10 and 12 by X-ray diffraction analyses.     

X-Ray Structural Analysis of NiII, PdII, and PtII Complexes with the Potentially Tridentate Ligand 1,3-Bis(diphenylphosphinomethyl)benzene, 1,3-C6H4(CH2PPh2)2

The ligand 1,3-bis(diphenylphosphinomethyl)benzene, 1,3-C₆H₄(CH₂PPh₂)₂ undergoes cyclometalation reactions, thus forming derivatives containing the tridentate moiety 2,6-bis(diphenylphosphinomethyl)phenyl,2,6-C₆H₃(CH₂PPh₂)₂. Complexes of the type trans-[MBr(C₆H₃CH₂PPh_{2 2})] with M = Ni^II, Pd^II, and Pt^II could be obtained and their crystal structures were here determined by X-ray diffraction (XRD) methods. The Ni complex belongs to the space group P2 ₁/c with a = 10.257(2), b = 16.234(5), c = 17.475(4) Å, = 109.34(2), and Z = 4. The Pd complex belongs to the space group P2 ₁/n with a = 10.325(3), b = 16.279(4), c = 17.303(4) Å = 105.34(3), and Z = 4. The Pt complex belongs to the space group P2 ₁/n with a = 10.127(2), b = 14.776(2), c = 19.023(3) Å, = 91.01(1), and Z = 4. Different distortions are induced by the rigid tridentate ligand on the square planar coordinations of the three metals. A significant difference between the two M-P bond distances is present in the Pt complex and can also be found in an analogous Pd complex.     

Epoxy-based oligomer containing dithia-aza-based naphthylazobenzene pendant: a chemosensor for Hg2+ and Cu2+ ions

A simple epoxy-based oligomer 1 containing naphthylazobenzene-appended dithia-aza moieties was prepared. In UV–vis measurements, the proposed oligomer showed the ion-sensing ability to Hg²⁺ and Cu²⁺ ions. The discrimination between two differently responding Hg²⁺ and Cu²⁺ ions was also realised from ‘ON–OFF’ type fluorescence responses of 1.     

Crystal structure and magnetic property of spin crossover complex Fe(3-phenylpyridine)2[Au(CN)2]2

A novel two-dimensional network bimetallic Fe Au spin crossover coordination polymer based on 3-phenylpyridine-coordinated iron centers and linear gold cyanide bridges {Fe(3-phenylpyridine)₂[Au(CN)₂]₂}_n (1), has been synthesized. The compound is characterized by elemental analysis, IR, single-crystal X-ray analysis at 300 and 90 K and magnetic measurements. The Fe^II ions in 1 have octahedral Fe^IIN₆ coordination geometries, which are linked by [Au(CN)₂]⁻ units at the equatorial plane to form a polymeric 2D sheet architecture. The two pyridine rings coordinate in axial position. Variable-temperature (2-300 K) magnetic susceptibility measurements of 1 were performed to determine the spin transition behavior. SQUID data show that high and low spin states exist in a 1:1 ratio at 90 K. However, only one kind of Fe^II atom is apparent crystallographically at 90 K, indicating that the high and low spin sites are disordered in the polymeric 2D framework.     

A Thermodynamic Study Between 18-Crown-6 with Mg2+, Ca2+, Sr2+and Ba2+ Cations in Water–Methanol and Water–Ethanol Binary Mixtures Using The Conductometric Method

The complexation reactions between Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations with the macrocyclic ligand, 18-Crown-6 (l8C6) in water–methanol (MeOH) binary systems as well as the complexation reactions between Ca²⁺ and Sr²⁺ cations with 18C6 in water–ethanol (EtOH) binary mixtures have been studied at different temperatures using conductometric method. The conductance data show that the stoichiometry of all the complexes is 1:1. It was found that the stability of 18C6 complexes with Mg²⁺, Ca²⁺, Sr²⁺ and Ba²⁺ cations is sensitive to solvent composition and in all cases, a non-linear behaviour was observed for the variation of log K _f of the complexes versus the composition of the mixed solvents. In some cases, the stability order is changed with changing the composition of the mixed solvents. The selectivity order of 18C6 for the metal cations in pure methanol is: Ba²⁺ > Sr²⁺ > Ca²⁺ > Mg²⁺. The values of thermodynamic parameters (Δ H _c ° and Δ S _c °) for formation of 18C6–Mg²⁺, 18C6–Ca²⁺, 18C6–Sr²⁺ and 18C6–Ba²⁺complexes were obtained from temperature dependence of the stability constants. The obtained results show that the values of (Δ H _c ° and Δ S _c °) for formation of these complexes are quite sensitive to the nature and composition of the mixed solvent, but they do not vary monotonically with the solvent composition.This revised version was published online in July 2005 with a corrected issue number.