共查询到20条相似文献,搜索用时 265 毫秒
1.
2.
3.
4.
用改进的BP算法结合改进的点估计法来进行结构非线性随机分析的概率特性计算。在加权残值法计算的基础上,进行了两端刚固的闭合圆柱壳失稳的可靠性计算,表明了该方法的有效性。 相似文献
5.
6.
This paper studies the dynamic stress intensity factor (DSIF) at the interface in an adhesive joint under shear loading. Material damage is considered. By introducing the dislocation density function and using the integral transform, the problem is reduced to algebraic equations and can be solved with the collocation dots method in the Laplace domain. Time response of DSIF is calculated with the inverse Laplace integral transform. The results show that the mode Ⅱ DSIF increases with the shear relaxation parameter, shear module and Poisson ratio, while decreases with the swell relaxation parameter. Damage shielding only occurs at the initial stage of crack propagation. The singular index of crack tip is -0.5 and independent on the material parameters, damage conditions of materials, and time. The oscillatory index is controlled by viscoelastic material parameters. 相似文献
7.
8.
本文通过实验对曲棍球击球技术进行了动力学分析.计算结果表明,击球动作的不确定性对其影响不大。文中使用的实验方法和计算公式适用于其它一些击球类运动. 相似文献
9.
计算结构力学的研究现状和展望 总被引:1,自引:0,他引:1
本文是计算结构力学发展的综述性文章,主要讨论了有限元法。文中就笔者认为重要的若干方面进行了评论,它包括理论发展、材料特性、非线性分析、动力分析、平行计算和软件系统。 相似文献
10.
随着大跨径桥梁结构在工程中应用日趋广泛,其施工控制问题也越来越受到工程界的重视。本文将计算结构力学方法引入桥梁结构的施工设计与控制,给出桥梁结构竣工后受力状态、施工各阶段理想状态的确定、施工控制方法及其程序系统的设计思想。 相似文献
11.
工程机械中的运动机构同时往往也是承载机构,其结构优化问题须同时考虑机构运动和结构受力,较传统的结构优化问题需要考虑的因素更多,约束条件更为复杂。本文以广泛应用于工程机械中的四连杆式俯仰机构为对象,研究了工程机械中机构-结构一体化优化问题,探讨了此类优化问题的目标函数、设计变量和约束条件,并对实际工程机械进行了分析和优化,达到了理想的效果。 相似文献
12.
13.
本文讨论了在结构重分析中局部网格细分时,修改区域与未修改区域交界处的位移连续性问题,文中提出了广义主从控制的概念,把边界上的新增节点作为从节点,同时受多点控制,保证了结构的连续性,并对有限元结构中的常见单元给出了边界的位移控制关系,而且此关系已应用于DDJ程序系统,实现了算法及程序设计。 相似文献
14.
Introduction Drillstringsina3Dlargedisplacementwellboreareusuallyregardedas3Dcurved beamswithlargedisplacementandlargerotationbutwithsmallstrain,thus,therelationship betweenstressandstrainislinear.Thedeformationofdrillstringscanbecomposedoftwo parts:oneiscalledtheinitialdeformationcausedwhentheaxisofthedrillstringisdeformed fromitsstraightconfigurationtothepositioncoincidentwiththewellaxis,involvinglarge rotationsandwiththeimplicationoffiniterotationalproblem.Theotheristhedeformation fromthew… 相似文献
15.
美国航空航天局Lcwis研究中心为选择航天飞机主发动机(SSME)零件,目前正在研究概率结构分析的方法学。这种方法学包括下面4个规划组成部分:①复合载荷谱;②概率结构分析方法;⑧概率有限元理论——新变分原理;④概率结构分析的应用。此方法学在概率结构分析的一些重要方面取得了重大技术进展。本文综述了这个规划和到目前为止取得的重大成就。 相似文献
16.
极限分析和安全分析的近代发展方向是寻找通用性强,计算效率高的数值方法。本文介绍将有限单元法和数学规划法相结合的、同时适用于极限分析和安全分析的统一数值方法,包括下限格式和上限格式。 相似文献
17.
机构运动的全程分析法 总被引:2,自引:0,他引:2
针对机构运动的“瞬时分析法”存在的问题,强调应该运用构件运动方程的联系对机构运动进行“全程分析”,并以牛头刨床机构为例对其运动的全程进行了数值计算与分析。 相似文献
18.
Cracking analysis of fracture mechanics by the finite element method of lines (FEMOL) 总被引:1,自引:0,他引:1
The Finite Element Method of Lines (FEMOL) is a semi-analytic approach and takes a position between FEM and analytic methods.
First, FEMOL in Fracture Mechanics is presented in detail. Then, the method is applied to a set of examples such as edge-crack
plate, the central-crack plate, the plate with cracks emanating from a hole under tensile or under combination loads of tensile
and bending. Their dimensionless stress distribution, the stress intensify factor (SIF) and crack opening displacement (COD)
are obtained, and comparison with known solutions by other methods are reported. It is found that a good accuracy is achieved
by FEMOL. The method is successfully modified to remarkably increase the accuracy and reduce convergence difficulties. So
it is a very useful and new tool in studying fracture mechanics problems.
The English text was polished by Yunming Chen. 相似文献
19.
机抖激光陀螺动力学分析及优化设计 总被引:3,自引:0,他引:3
利用有限元分析软件ANSYS,建立了机抖激光陀螺有限元模型并进行了模态分析和随机振动分析,通过与试验结果对比,验证了模型的合理性和精确性,指出了现有结构的薄弱环节。利用灵敏度分析技术分析了安装盒底部、四壁和支柱等几何尺寸和约束位置对机抖激光陀螺固有频率的影响。计算表明:影响固有频率的主要因素是安装盒的支柱高度、底面厚度和约束位置,而安装盒四壁厚度对固有频率影响很小。最后对结构进行了优化设计,优化后结构一阶固有频率提高35.7%,二阶以上固有频率提高63%以上。 相似文献
20.
杭州市文晖路立交桥主桥的空间分析 总被引:8,自引:0,他引:8
现代桥梁跨径不断增大,宽度也在不断加宽,受力条件愈来愈复杂,其表现的空间效应越来越明显,单纯的由平面分析很难反应桥梁的实际受力情况。运用实体退化单元对杭州市文晖路立交桥主桥(斜拉桥)进行了其三维空间分析,特别分析了主梁纵、横向的正应力和索塔竖向正应力。分析结果表明该桥的空间效应比较明显,在恒载作用下桥梁的受力比较合理。 相似文献