NON-LINEAR DYNAMIC MODEL RETRIEVAL OF SUBTROPICAL HIGH BASED ON EMPIRICAL ORTHOGONAL FUNCTION AND GENETIC ALGORITHM

Aiming at the difficulty of accurately constructing the dynamic model of subtropical high, based on the potential height field time series over 500 hPa layer of T106 numerical forecast products, by using EOF(empirical orthogonal function) temporal-spatial separation technique, the disassembled EOF time coefficients series were regarded as dynamical model variables, and dynamic system retrieval idea as well as genetic algorithm were introduced to make dynamical model parameters optimization search, then, a reasonable non-linear dynamic model of EOF time-coefficients was established. By dynamic model integral and EOF temporal-spatial components assembly, a mid-/long-term forecast of subtropical high was carried out. The experimental results show that the forecast results of dynamic model are superior to that of general numerical model forecast results. A new modeling idea and forecast technique is presented for diagnosing and forecasting such complicated weathers as subtropical high.     

Scattering of SH-wave from interface cylindrical elastic inclusion with a semicircular disconnected curve

Scattering of SH wave from an interface cylindrical elastic inclusion with a semicircular disconnected curve is investigated.The solution of dynamic stress concentration factor is given using the Gteen's function and the method of complex variable functions.First,the space is divided into upper and lower parts along the interface.In the lower half space,a suitable Green's function for the problem is constructed.It is an essential solution of the displacement field for an elastic half space with a semi-cylindrical hill of cylindrical elastic inclusion while bearing out-plane harmonic line source load at the horizontal surface.Thus,the semicircular disconnected curve can be constructed when the two parts are bonded and continuous on the interface loading the undetermined anti-plane forces on the horizontal surfaces.Also,the expressions of displacement and stress fields are obtained in this situation.Finally,examples and results of dynamic stress concentration factor are given.Influences of the cylindrical inclusion and the difierence parameters of the two mediators are discussed.     

Scattering of SH-wave from interface cylindrical elastic inclusion with a semicircular disconnected curve

Scattering of SH wave from an interface cylindrical elastic inclusion with a semicircular disconnected curve is investigated. The solution of dynamic stress concentration factor is given using the Green＇s function and the method of complex variable functions. First, the space is divided into upper and lower parts along the interface. In the lower half space, a suitable Green＇s function for the problem is constructed. It is an essential solution of the displacement field for an elastic half space with a semi-cylindrical hill of cylindrical elastic inclusion while bearing out-plane harmonic line source load at the horizontal surface. Thus, the semicircular disconnected curve can be constructed when the two parts are bonded and continuous on the interface loading the undetermined anti-plane forces on the horizontal surfaces. Also, the expressions of displacement and stress fields are obtained in this situation. Finally, examples and results of dynamic stress concentration factor are given. Influences of the cylindrical inclusion and the difference parameters of the two mediators are discussed.     

双相介质半空间中圆孔对透射SH波的稳态分析

研究了平面SH波在半空间双相弹性介质中的传播。通过Green函数和积分方程方法,按照复变函数描述,对透射波被圆孔散射的情况进行稳态分析。将双相介质半空间沿界面剖分为1/4空间介质Ⅰ和含圆孔的1/4空间介质Ⅱ,分别构造了介质Ⅰ和介质Ⅱ中反平面点源荷载的Green函数,按双相介质中平面SH波的处理方法,给出介质Ⅰ和介质Ⅱ中的平面位移波,两种介质之间的相互作用力与对应Green函数的乘积沿界面的积分与平面位移波叠加得到介质Ⅰ和介质Ⅱ中的全部位移场。按照界面的位移连续条件,定解积分方程组,得到问题的稳态解,并给出圆孔位置和介质参数对散射的影响。     

Unsteady laminar mixed convection about a spinning sphere with a magnetic field

The unsteady laminar boundary-layer flow over an impulsively started translating and spinning isothermal body of revolution in the presence of buoyancy force and magnetic field applied normal to the surface are investigated. Velocity components and temperature are obtained as series of functions in powers of time. Leading and first order functions are obtained analytically and second order functions are determined numerically. The general results are applied to a sphere to investigate the effects of magnetic field and buoyancy force on the velocity and temperature fields and the onset of separation. The magnetic field and buoyancy force are more effective for small rotational speeds and the presence of magnetic field retards the onset of separation. The effect of magnetic field on the temperature field and surface heat flux is weak, indirect and through the velocity field. The magnetic field is observed to initially increase the surface heat flux on the upstream face of the sphere and decrease it on the downstream face.     

The Moving Plane Inhomogeneity Boundary with?Transformation Strain

Within the context of linear elastodynamics, the radiated fields (including inertia) for a plane inhomogeneous inclusion boundary with transformation strain (or eigenstrain), moving in general motion under applied loading, have been obtained on the basis of Eshelby??s equivalent inclusion method, by using the strain field of a moving homogeneous inclusion boundary previously obtained. This dynamic strain field, obtained from the dynamic Green??s function (for an isotropic material), is unique, and has as initial condition the limit of the spherical Eshelby inclusion, as the radius tends to infinity, which is the minimum energy solution for the half-space inclusion. With the equivalent dynamic eigenstrain (which is dependent on the velocity of the boundary), the radiated fields for the inhomogeneous plane inclusion boundary can be obtained, and from them the driving force on the moving boundary can be computed, consisting of a self-force (which is the rate of mechanical work (including inertia) required to create an incremental region of inhomogeneity with eigenstrain), and of a Peach-Koehler force associated with the external loading. While for an expanding plane homogeneous inclusion boundary the Peach-Koehler force is independent of the boundary velocity, in the case of an inhomogeneous one it is not.     

压电介质中受拉伸与弯曲联合作用的圆币形裂纹问题

以弹性位移分量和电势函数为基本未知量时，横观各向同性压电介质非轴对称三维问题的控制微分方程是四个二阶线性偏微分方程相联立的方程组。本文导出了用四个调和函数表示位移及电势的该方程组的势函数通解。作为通解的应用举例，文中求解了压电陶瓷材料中受拉伸与弯曲联合作用的圆币形裂纹问题，得到了裂纹尖端附近应力场及电位移场的解析表达式。结果表明裂尖场以及应力强度因子和电位移强度因子均表现出复杂的机－电耦合行为。     

Performance enhancement of a DC-operated micropump with electroosmosis in a hybrid nanofluid: fractional Cattaneo heat flux problem

The purpose of this investigation is to theoretically shed some light on the effect of the unsteady electroosmotic flow (EOF) of an incompressible fractional second-grade fluid with low-dense mixtures of two spherical nanoparticles, copper, and titanium. The flow of the hybrid nanofluid takes place through a vertical micro-channel. A fractional Cattaneo model with heat conduction is considered. For the DC-operated micropump, the Lorentz force is responsible for the pressure difference through the microchannel. The Debye-Hükel approximation is utilized to linearize the charge density. The semi-analytical solutions for the velocity and heat equations are obtained with the Laplace and finite Fourier sine transforms and their numerical inverses. In addition to the analytical procedures, a numerical algorithm based on the finite difference method is introduced for the given domain. A comparison between the two solutions is presented. The variations of the velocity heat transfer against the enhancements in the pertinent parameters are thoroughly investigated graphically. It is noticed that the fractional-order parameter provides a crucial memory effect on the fluid and temperature fields. The present work has theoretical implications for biofluid-based microfluidic transport systems.

     

Scattering of SH-wave by cracks originating at an elliptic hole and dynamic stress intensity factor

The method of complex function and the method of Green‘s function are used to investigate the problem of SH-wave scattering by radial cracks of any limited length along the radius originating at the boundary of an elliptical hole, and the solution of dynamicstress intensity factor at the crack tip was given. A Green‘s function was constructed for the problem, which is a basic solution of displacement field for an elastic half space containing a half elliptical gap impacted by anti-plane harmonic linear source force at any point of its horizontal boundary. With division of a crack technique, a series of integral equations can be established on the conditions of continuity and the solution of dynamic stress intensity factor can be obtained. The influence of an elliptical hole on the dynamic stress intensity factor at the crack tip was discussed.     

冻土活动层相变温度场Chebyshev拟谱分析

在冻土相变温度热传导机理基础上,应用冻土计算中水热输运过程成熟的通用物理模型,提出冻土活动层温度的一种全新的数值分析方法-谱方法.应用Chebyshev多项式作为基函数将温度解展开,在研究域(或单元)内采用伪谱Chebyshev逼近的谱方法.为了与谱方法的高精度相配合及提高时程积分解的稳定性,本文应用四阶Runger-Kutta法进行时程积分,变物性温度泛函-热导系数、热容量等考虑效应滞后的处理方法.本文提出冻土非线性问题数值计算拟谱分析的理论构架,其计算方法在冻土工程应用中具有一定的理论导向作用和较大的实用价值.     

Green function on two-phase saturated medium by concentrated force in two-dimensional displacement field

The Green function on two-phase saturated medium by concentrated force has a broad and important use in seismology, seismic engineering, soil mechanics, geophysics, dynamic foundation theory and so on. According to the Green function on two-phase saturated medium by concentrated force in three-dimentional displacement field obtained by Ding Bo-yang et al. , it gives out the Green function in two-dimensional displacement field by infinite integral method along x3 -direction derived by De Hoop and Manolis. The method adopted in the thesis is simpler. The result will be simplified to the boundary element method of dynamic problem.     

周边式桁架可展开天线基于地面的网面调整

借鉴M.C.Natori思想对周边式桁架可展开天线提出了基于地面的网面优化调整方法,建立了以纵向拉索调整力为设计变量,天线反射面的表面均方根误差为目标函数,频率和应力为约束的优化数学模型,并用遗传算法进行了求解。数值结果表明,采用该方法在地面上对周边式桁架可展天线进行网面调整,能有效地消除地面重力的影响,较为准确地预测天线由于环境变化(由地面环境到太空环境)而引起的变形,使得最终调整获得的天线表面精度能够满足太空无重力环境下的精度要求,这种新方法对工程中天线的设计和网面调整具有指导作用。     

Transient flow of magnetized Maxwell nanofluid: Buongiorno model perspective of Cattaneo-Christov theory

The present research article is devoted to studying the characteristics of Cattaneo-Christov heat and mass fluxes in the Maxwell nanofluid flow caused by a stretching sheet with the magnetic field properties. The Maxwell nanofluid is investigated with the impact of the Lorentz force to examine the consequence of a magnetic field on the flow characteristics and the transport of energy. The heat and mass transport mechanisms in the current physical model are analyzed with the modified versions of Fourier’s and Fick’s laws, respectively. Additionally, the well-known Buongiorno model for the nanofluids is first introduced together with the Cattaneo-Christov heat and mass fluxes during the transient motion of the Maxwell fluid. The governing partial differential equations (PDEs) for the flow and energy transport phenomena are obtained by using the Maxwell model and the Cattaneo-Christov theory in addition to the laws of conservation. Appropriate transformations are used to convert the PDEs into a system of nonlinear ordinary differential equations (ODEs). The homotopic solution methodology is applied to the nonlinear differential system for an analytic solution. The results for the time relaxation parameter in the flow, thermal energy, and mass transport equations are discussed graphically. It is noted that higher values of the thermal and solutal relaxation time parameters in the Cattaneo-Christov heat and mass fluxes decline the thermal and concentration fields of the nanofluid. Further, larger values of the thermophoretic force enhance the heat and mass transport in the nanoliquid. Moreover, the Brownian motion of the nanoparticles declines the concentration field and increases the temperature field. The validation of the results is assured with the help of numerical tabular data for the surface velocity gradient.     

有限元广义应力影响函数定理及算法

当一个定向的单位集中力在结构上移动时,结构某处某应力分量的值是该力位置的函数,称为应力影响函数.本文作者曾经提出并证明了连续体和有限元模型的平均应力影响函数定理,设计了算法,编制了程序,可用于求各类单元组成的复杂结构的应力影响函数,并已应用于工程中。本文发展上述理论,提出有限元模型广义应力影响函数定理,据此可用间接法一次求得任意单元中任一点应力分量或由应力分量的线性组合表示的物理量的影响函数。讨论了单元基准节点位移模式的单元特征向量求法。     

随机结构非线性动力响应的概率密度演化分析

提出了随机结构非线性动力响应分析的概率密度演化方法．根据结构动力响应的随机状态方程，利用概率守恒原理，建立了随机结构非线性动力响应的概率密度演化方程．结合Newmark-Beta时程积分方法与Lax-Wendroff差分格式，提出了概率密度演化方程的数值分析方法．通过与Monte Carlo分析方法对比，表明所给出的概率密度演化方法具有良好的计算精度和较小的计算工作量．研究表明：随机结构非线性动力响应概率密度具有典型的演化特征，随着时间增长，概率密度曲线分布趋于复杂．     

Numerical Solvers for Radiation and Conduction in High Temperature Gas Flows

In this paper, the authors introduce a robust numerical technique for radiation–conduction heat transfer in the high temperature fields of gas turbine combustors. The conduction and radiation effects are analyzed by a differential and an integral equation, respectively. Using discrete ordinates for the angular discretization of the integral equation for the radiation effects and a Galerkin discretization for the heat equation, the authors propose a fast multilevel algorithm to solve the fully discretized problem. The algorithm uses the same mesh hierarchy for both radiation and conduction effects, but with two different smoothing operators. Numerical results are shown for test problems in three space dimensions, and comparisons to other methods are also given.     

The displacement solution of conical shell and its application

In this paper,the displacement solution method of the conical shell is presented.Fromthe differential equations in displacement form of conical shell and by introducing adisplacement function,U(s,θ),the differential equations are changed into an eight-ordersoluble partial differential equation about the displacement function U(s,θ)in which thecoefficients are variable.At the same time,the expressions of the displacement and internalforce components of the shell are also given by the displacement function.As special casesof this paper,the displacement function introduced by V.Z.Vlasov in circular cylindricalshell,the basic equation of the cylindrical shell and that of the circular plate are directlyderived.Under the arbitrary loads and boundary conditions,the general bending problem of theconical shell is reduced to finding the displacement function U(s,θ),and the generalsolution of the governing equation is obtained in generalized hypergeometric function,Forthe axisymmetric bending deformation of the     

管道内差压驱动机器人相关流场数值模拟研究

管道内流场对机器人的驱动力是设计管内机器人外形尺寸的基本依据,本文用数值方法计算了管道内检测机器人所受的差压驱动力。在合理提出一些基本假设后,用一阶迎风和中心差分格式离散管道内检测机器人附近流场的控制方程,用SIMPLE算法求得了不同入口流速下机器人附近的流场分布,以及流场对机器人的驱动力。结果表明雷诺数为1875时,机器人下游流场变为湍流;当雷诺数为60000时,机器人下游流场变为非定常流,出现周期性流动;计算数据还表示驱动力只与管内平均流速有关而与运行压力无关。     

SH波绕界面孔的散射

用波函数展开方法研究了SH波绕界面孔的散射问题。由入射、反射和透射波组成的自由波场与孔的散射场叠加成总波场。按照一定方式将两个半平面散射波场延拓于全平面，通过Hankel-Fourier展开方法求得了任意形状孔散射场的级数解。以椭圆形孔为例计算了孔边缘的动应力集中系数。     

等截面梁有限变形的传递函数解法

本文应用传递函数方法对等截面梁的有限变形进行了分析,对于等截面梁的有限变形问题,该方法从变分方程出发把问题表述为状态空间的形式,然后利用Gauss积分对轴力进行加速迭代求解,不需要进行增量迭代即可取得具有良好计算精度的数值结果,对简单受力的等截面梁情况该解可以看作是所讨论问题的精确解。对于受力比较复杂或者阶梯变截面梁情况,为减少运算量,可以和有限元法类似,采用多个单元进行拼接,从而得到问题的解。数值算例表明,本方法具有半解析、精度高、收敛快等特点。