粉末晶体(ZrO2)x(Bi2O3)1-x(x=1.0, 0.97) 晶体结构分析

为了确定ZrO2和(ZrO2)0.97(Bi2O3)0.03的晶体结构和原子热振动各向同性温度因子B，对该粉末晶体进行X射线衍射实验，建立了晶体结构模型，进行晶体结构分析。首先，采用共沉淀法和高温固相烧结法制备了纳米氧化锆ZrO2和(ZrO2)0.97(Bi2O3)0.03粉末晶体，接着，使用X射线测试仪对两种样品进行了衍射实验（XRD），利用Rietveld 精修方法的 RIETAN-2000程序对所得实验结果进行了晶体结构分析，获得了晶体结构参量和原子热振动各向同性温度因子B。通过Maximum Entropy Method（MEM）解析得到了粉末晶体(ZrO2)x(Bi2O3)1-x(x=1.0，0.97)的等高电子密度分布可视化图谱。结果表明，(ZrO2)0.97(Bi2O3)0.03的晶胞体积比ZrO2的晶胞体积大分别为140.6850 Å3和140.5637Å3；ZrO2晶体的原子热振动各向同性温度因子B(Zr)、BO(1)、BO(2)和 B（Bi）分别为0.690、0.269、 0.178 和 0 Å2，(ZrO2)0.97(Bi2O3)0.03晶体的分别为0.460 、0.583 、0.121 和0.581 Å2。 确定了(ZrO2)0.97(Bi2O3)0.03的晶体结构属于单斜晶系，实现了等高电子密度分布三维（3D）和二维（2D）的可视化，进一步确定了晶体结构和原子位置。     

ZnO:Eu3+纳米晶的制备及发光性质研究

为了探讨稀土Eu3 与纳米ZnO基质之间的能量传递,利用溶胶-凝胶法(Sol-Cel)制备了ZnO:Eu3 纳米晶,测量了样品的X射线衍射谱(XRD)、光致发光谱(PL)和激发谱(PLE).X射线衍射结果表明,ZnO:Eu3 具有六角纤锌矿晶体结构.观察到稀土Eu3 强而窄的特征发射和ZnO基质弱而宽的可见发射.分析了稀土Eu3 激发态5D0→7F1,5D0→7F3和5D0→7F2特征发射机制.给出了Eu3 离子特征发射的峰值强度随掺Eu3 浓度增加而增强的变化关系,证实了纳米ZnO基质与稀土Eu3 离子之间存在能量传递.比较了Eu3 离子5D0→7Fl磁偶极跃迁(MD)与5D0→7F2电偶极跃迁(ED)的相对强度,证实了在ZnO纳米晶基质中大多数Eu3 占据了对称性较低的格位.     

白光LED用红色荧光粉α-Gd2(MoO4)3:Eu的制备及其发光性能研究

以Gd2O3,MoO3,Eu2O3为原料,采用传统的高温固相反应方法制备了一种新的白光LED用红色荧光粉材料α相Gd2(MoO4)3:Eu.利用XRD,SEM,激发和发射光谱对其进行了研究.分析了助熔剂和激 .活剂对样品的晶体结构,表面形貌和发光性能的影响.结果表明这种荧光粉可以被近紫外光(395 nm)和蓝光(465 nm)有效激发,发射峰值位于613 nm(Eu3 离子的5D0→7F2跃迁)的红光,激发波长与目前广泛使用的蓝光和紫外光LED芯片相符合.因此,三价Eu离子激活的α相Gd2(MoO4)3是一种可能应用在白光LED上的红色荧光粉材料.     

低温下氘分子红外吸收特性研究

采用基于第一性原理的从头计算单双取代耦合簇方法并结合cc-PVTZ基组,计算了处于基态的(D2)3分子两种不同构型(D2d和D2h)的各种能量模式及其对应的红外谱图.利用自主研制的低温平面冷冻靶系统和低温红外光谱测量系统获得了低温下液氘的红外吸收谱.结果表明,实验测得的液氘红外吸收最强位置与理论计算得到的基态(D2)3分子的红外强度最大位置基本一致,且均为低模式Q1(0)+S0(0).     

Pu_3体系的结构与势能函数

用相对论有效原子实势 (RECP)和密度泛函 (B3LYP)方法对Pun(n =2 ,3)体系的结构进行了优化 ,得到了Pu2 和Pu3分子的几何构型分别为D∞h,D3h,其基态分别为 13和 19重态 .在B3LYP RECP水平上得到Pu2 分子的光谱常数ωe=5 2 .3845cm- 1 ,ωe 　χe=0 .0 2 0 1cm- 1 和Pu3分子的谐振频率 (ν1 =5 6 .90 0 7cm- 1 ,ν2 =5 7.1816cm- 1 ,ν3=6 4 0 785cm- 1 )等性质 ,并通过正规方程组和多体展式理论 ,得到了Pu2 ,Pu3的分析势能函数 .     

Al2Hx(x=1～3)分子团簇结构与光谱研究

用密度泛函理论(DFT)的B3LYP方法在6-311 g(d,p)水平上对Al2Hx(x=1~3)分子团簇的几何构型、电子结构、振动频率、垂直电离能和垂直电子亲和能等性质进行了理论研究.通过对基态结构的几何参数分析发现,它们的基态结构趋于对称性较高的构型.它们的基态结构为:Al2H(2A1)C2V,Al2H2(1Ag)D2h和Al2H3(2A′1)D3h.对基态结构的垂直电离能讨论表明,氢原子数从1增加到3,其气态分子越来越稳定.     

锶镁掺杂钡位对Y-123超导性能和晶体结构的影响比较

采用四引线法对掺杂样品YBa2-xMgxCu3O7-δ和YBa2-xSrxCu3O7-δ(x=0.0～0.2)的超导电性能进行了系统测量,发现随着镁和锶掺杂量的增加,样品的超导转变温度总体呈明显降低趋势.同时利用XRD对系列样品YBa2-xMgxCu3O7-δ和YBa2-xSrxCu3O7-δ的晶体结构进行研究,发现随着掺杂量的增加,样品的晶体结构由正交相向四方相转变.初步分析了钡位镁和锶掺杂所引起的晶体结构变化对超导电性的影响.该研究结果为高温超导机理的进一步研究提供了实验资料.     

L-脯氨酸衍生的手性二氧大环多胺的晶体结构

以L-脯氨酸为原料合成了刚性手性二氧大环多胺(12S)-1, 4, 7, 10-四氮杂二环[10.3.0]十五烷-3, 11-二酮,通过元素分析、红外光谱、1H NMR、13C NMR和质谱进行了结构表征,并用X-射线单晶衍射测定了其晶体结构.该化合物为正交晶系,空间群为P2(1)2(1)2(1),晶体结构数据为:Mr=258.33,a=0.51019(8)nm,b=1.26981(18)nm,c=2.0130(3)nm,V=1.3041(3)nm3,D=1.316g/cm3,μ=0.097mm-1,F(000)=560,Z=4,R1=0.0712,ωR2=0.1302.化合物通过分子间氢键(N-H…O)形成了一系列沿a轴的微孔手性通道.     

固体颗粒的结构演化与机械力化学效应

干法、室温振动研磨制备铝超微颗粒, 分别将研磨2 h, 4 h和8 h的铝粉, 在常温下超声水解得到白色Al(OH)₃胶体, 水解产品经干燥、研磨、焙烧后制备出多孔、片状γ -Al₂O₃纳米颗粒, 粒度分布在30---50 nm之间. 借助于X射线衍射(XRD)分析方法和透射电子显微镜(TEM), 研究固体颗粒在细化过程中的能量转换, 分析颗粒的微结构演化与机械力化学反应的关系, 确定理想的研磨时间. 研究结果表明: 固体颗粒在机械力的作用下产生大量的应变和位错缺陷, 使材料处于亚稳、高能活性状态, 易于诱发机械力化学反应, 在一定条件下晶体的表面能、应变能和层错能相互转化; 研磨2 h的铝颗粒内部, 晶格畸变和位错概率最大, 材料显示出极高的化学反应活性, 在超声波激发下, 储存在材料内部的能量被充分释放, 在较短的时间内, 水解生成Al(OH)₃纳米颗粒.     

Cs(6D_J)+(H_2,H_e)的反应与非反应碰撞能量转移

在样品池条件下,利用原子荧光光谱方法,测量了Cs(6DJ)与H2,He碰撞中的反应与非反应能量转移截面.利用脉冲激光886nm线双光子激发Cs(6S)到Cs(6D3/2)态,原子荧光中除含有6D3/2→6P的直接荧光外,还含有6D5/2→6P的转移荧光.利用三能级模型的速率方程分析,在不同的He和H2密度下,分别测垦直接荧光与转移荧光的时间积分荧光强度比,得到了6D3/2与H2和He碰撞的精细结构转移截面分别为σ=(55±13)×10-16和(16±4)×10-16 cm2,同时确定了6D5/2与H2和He的碰撞猝灭速率系数.6D5/2态与H2的碰撞猝灭速率系数比6D5/2与He的大,它是反应与非反应速率系数之和,利用实验数据确定非反应速率系数为6.3×10-10 cm3·s-1,得到6D5/2与H2的反应截面为(2.0±0.8)×10-16 cm2.利用不同H2(或He)密度下6D5/2→6P3/2时间积分荧光强度,得到6D3/2与H2反应截面为(4.0±1.6)×10-16 cm2,6D3/2与H2反应的活性大于6D5/2.     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.