氦原子注入缺陷性纳米碳管的机理

采用经典分子动力学方法和TLHT势模型,研究了He注入不同管壁缺陷的单壁纳米碳管（SWNCT）的动力学过程,发现对应不同入射能量,He有4种典型的运动模式。管壁缺陷的尺寸对He在SWNCT中的吸附存储行为有很大影响。 Based on the classical molecular processes of He atom into SWCNT with wall dynamics method and TLHT potential model, the injection defects of different radius are studied. The calculated results indicate that there are four typical moving patterns of He atom with different injective energy and the size of wall defects make a great difference to the absorption and storage behavior of He into SWNT.     

B和H离子顺次注入单晶Si 引起的缺陷及其热演变(英文)

室温下将130 keV,5x1014 cm-2 B离子和55 keV,1x1016 cm-2 H离子单独或顺次注入到单晶Si中,采用横截面试样透射电子显微镜(XTEM)和慢正电子湮没技术(SPAT) 研究了离子注入引起的微观缺陷的产生及其热演变。XTEM观测结果显示,B 和H 离子顺次注入到单晶Si 可有效减少(111) 取向的H板层缺陷,并促进了(100) 取向的H板层缺陷的择优生长。SPAT 观测结果显示,在顺次注入的样品中,B 离子平均射程处保留了大量的空位型缺陷。以上结果表明,B离子本身及B 离子注入所产生的空位型缺陷对板层缺陷的生长起到了促进作用。Abstract:Cz n-type Si (100) wafers were singly or sequentially implanted at room temperature with 130 keV B ions at a fluence of 5x1014 cm-2 and 55 keV H ions at a fluence of 1x1016 cm-2. The implantation-induced defects were investigated in detail by using cross-sectional transmission electron microscopy (XTEM) and slow positron annihilation technique (SPAT). XTEM results clearly show that sequential implantation of B and H ions into Si could eliminate the (111) platelets and promote growth of (100) platelets during annealing. SPATmeasurements demonstrate that in B and H sequentially implanted and annealed Si, more vacancy-type defects could remain in sample region around the range of B ions. These results indicat e that the promotion effect shouldbe attributed to the role of both B and B implanted induced vacancy-type defects.     

离子注入对黑松花粉粒细胞核的损伤效应

利用激光扫描共聚焦显微技术和碱性单细胞凝胶电泳技术对经过离子注入后的黑松花粉粒内细胞核的直接损伤效应进行了观察鉴定。 研究结果表明, 离子注入后可以直接损伤细胞核结构, 导致细胞核裂解。 细胞核的损伤程度与注入离子的剂量密切相关, 即细胞核DNA分子的损伤程度随着注入离子剂量的增加而提高。 The damage of pollen nuclei of Pinus thunbergii induced directly by ion implantation were measured by the laser confocal microscopy technique and the single cell gel electrophoresis test. The results showed that ion implantation caused the nuclei structure to be damaged, leading to the nuclei degradation. The results of statistical analysis showed that the damage grade of nuclei was very correlative with the ion dosage. The damage degree of DNA in the nuclei at the level of single cells was increased with the increase of the ion implantation dose.     

磁控注入电子枪的研究

介绍了毫米波回旋速调管磁控注入电子枪的结构与特点.依据回旋管对电子枪的要求,考虑相对论效应和空间电荷效应,编制了一套计算程序.利用电子枪模拟程序对电子轨迹进行模拟计算,研究了电极形状、磁场分布以及电子轨迹与电子注参量的影响,为磁控注入电子枪的设计提供了理论依据. The Structure and characteristics of the magnetron injection gun (MIG) for mm wave gyro-klytron are introduced. According to the requirements for the gyro-klytron, the relativistic effect and the space charge effect is taken into account . A program is developed for CAD. An electron gun code is used to simulate the electron trajectory, the influence of electrode shape, magnet field, electron trajectory on the electron beam have been studied. The theory for design of the electron gun is presented.     

0.56GeV C6+离子在YIG上的辐照效应

用穆斯堡尔谱学、正电子湮没技术和高分辨电子显微镜等方法研究了高能碳离子在石榴石铁氧体材料上的辐照效应,辐照效应引起材料微结构变化源于缺陷和缺陷团,导致缺陷周围磁结构变化,内场趋向各向同性,辐照并且使得晶胞参数变大;引起材料磁性能变化源于由于O~2—空位形成而使超交换场降低,从而减小超精细场。 The vacancies and vacancy clusters induced by the irradiation lead to the change of themagnetic structure around the defects. The reduction of the hyperfine magnetic field is caused by thelower superexchange field due to the formation of the O~(2-) vacancies. The change of direction of thehyperfine field has been also observed in Mossbauer spectra. On the other hand, the X-raydiffraction showed that the defects give rise to an increase of the lattice constant of the samples.     

ECR离子源外电子注入技术研究

使用电子枪对ECR（Electron Cyclotron Resonance）等离子体注入外电子束是继铝衬弧腔、偏压盘之后,对等离子体电子的额外补充的又一种手段,通过向弧腔中注入一定能量与流强的电子束,以期提高引出束流的流强与电荷态。但由于该方法可控参数繁多,经验积累与报道资料都很少,且设计与操作远不如偏压盘等手段简便,故一直未能得到深入研究。通过以三维仿真软件CST粒子工作室对注入到弧腔电子束的运动轨迹的模拟结果为依据、以18 GHz ECR蒸发冷却源为平台,进行了ECR等离子体注入电子束的实验,结果表明:在一定实验条件下,当注入电子束能量超过1 800 eV时,会产生一种引出的离子束流的激增现象。在这个现象中,脉冲与直流的流强均比未注入电子时要高,束流电荷态向高价方向移动,且可通过控制实验条件来控制这种现象。最后对于这种电子并未通过共振面,却能起到提高电荷态与流强的作用进行了分析与讨论,并认为该现象在改善直流束与脉冲束性能的方面都有着积极的意义。The injection of the electron beam into the ECR (Electron Cyclotron Resonance)plasma by electron gun is a new method for the additional supplementary of the plasma electron, following the aluminum chamber wall and the bias plate, we are expecting for the higher current and charge state of the ion beam with it. However, because of the controllable parameter's variety, the lack of the accumulation of experience and data, and the shortage of convenience in designing and experimental practicing compared by biased disk and other means,it has always not been intensively studied. In this article, we take the 18 GHz ECR Ion Source using evaporative cooling technique as experimental platform, do the experiment of injecting electron into ECR plasma base on the simulation result of the electron beam's path in ECR's chamber by the 3D simulation software CST the particle studio. It shows that a pulsing leap of the current of the extracting ion beam appears when the injecting electron's energy is above 1 800 eV. In the mean time, the top of the pulse and the average current of the ion beam rises, the ionization state moves to a higher level. This phenomenon can be turned on and off by controlling the experimental condition. At the last part of the article, we discuss this improvement of the current and charge state of the ion beam despite of the position's missing between the injection of electron beam and the resonance surface, and hold the opinion that this phenomenon is positive to both pulsed and direct beam.     

利用HIRFL-CSR开展分子离子复合离解研究的可行性分析

介绍了储存环高精度分子谱学研究的科学意义、 国内外研究现状和利用HIRFL-CSR开展该项研究的优势, 着重论证了HIRFL-CSR分子离子注入实验环的总体设计方案和技术方案。 通过在HIRFL-CSR实验环上增建一条分子离子注入线, 将实验环改造成能兼顾现有物理实验和大分子物理研究的综合性研究平台, 为分子离子复合离解研究提供良好的技术支撑。 特别是质量数大于70的分子离子, 能显著提高其能量分辨。 In the present paper, it is introduced the scientific background and the current status of the high precision spectroscopy of the molecular ions at cooler storage ring. The advantages to study the dissociative recombination(DR) processes using cooler storage ring CSRe are discussed. The physics design,the main parameters of the injection beam line and the injection of the molecular ions into the CSRe and the key techniques are described in detail. With a new injection beam line,HIRFL-CSRe will be reconstructed to a multi discipline research platform,offering good opportunities for the study of DR processes of molecular ions,especially for that of the molecular ions of m>70 amu with much improved resolution.     

300MeV质子同步加速器概念设计优化（英文）

目前处于设计阶段的哈尔滨工业大学空间辐照效应装置,其核心部件是由1台10 MeV的注入器、1台300MeV的同步加速器以及输运线构成的加速器装置。同步加速器中引出的质子束流被用于辐照研究。基于装置的概念设计,优化了其同步加速器部分的设计。设计了新的磁聚焦结构,优化了基于新的磁聚焦结构的多圈注入系统的凸轨变化模式,提高了注入效率。为了更好地优化引出束流的时间结构,慢引出系统采用了RF knock-out的方法。为了满足精准辐照的要求,研究了RF Kicker的频率调制,发现RF Kicker的双频调制能使得引出束流更均匀。A research complex for aerospace radiation effects research is in the designing stage in Harbin Institute of Technology. Its core part is a proton accelerator complex, which consists of a 10 MeV injector, a 300 MeV synchrotron and beam transport lines. The proton beam extracted from the synchrotron is utilized for the radiation effects research. Based on the conceptual design, the design study for optimizing the synchrotron has been done. A new lattice design was worked out, and the decreasing pattern of the bump of the multi-turn injection system was optimized to increase the injection efficiency. In order to improve the time structure of the extracted beam, a RF knock-out method is employed in the slow extraction system. To meet the requirement of accurate control of dose, the frequency modulation of the RF kicker is well investigated, and the dual frequency modulation has been found to have a better performance for a uniform spill.     

螺线管磁场缺陷对电子束横向温度的影响

分析了直螺线管磁场缺陷的来源,考虑了电子束的空间电荷作用,采用数值方法模拟计算了磁场缺陷对电子束横向温度的影响 ,获得了电子冷却装置中直螺线管磁场的均匀性要求.结果表明,当相对磁场缺陷小于1× 1 0-3时 ,影响可以被忽略.In order to obtain the tolerance requirement for the magnetic field homogeneity of the solenoids in electron cooling device, the source of the magnetic imperfection and its influence on the transverse temperature of electron beam were investigated by means of numerical simulation, and taking the space charge effect of electron beam into account. The calculated result shows that the influence of the imperfection of magnetic field will be negligible when the relative magnetic field...     

核物质中的夸克凝聚

核物质中的夸克凝聚是在夸克层次研究核物理遇到的基本问题之一,特别是,它与核环境下强子性质的研究紧密相关．近年来,国内外对此开展了若干研究．简要介绍这方面的研究现状和指出存在的问题． Quark condensates in nuclear matter are one of the key problems for the study of nuclear physics at quark lever, and it is related closely to a deeper understanding of the properties of hadrons in nuclear matter. Recently we have seen some investigations made of the above subject. The present status and open problems are described in this paper.     

基于Abel逆变换的激光诱导等离子体辐射特性研究

激光诱导击穿光谱(LIBS)作为一种新型的物质成分测量方法已经在越来越多的领域得到广泛应用，但是与传统的分析方法相比，LIBS技术的分析性能还需进一步提高。LIBS技术的理论基础是激光诱导等离子体，从物理机理上研究等离子体特性，对LIBS系统实验参数的优化具有指导作用，也为提高LIBS技术的检测能力奠定理论基础。激光诱导等离子体是一个与空间相关的非稳态辐射源，空间分辨光谱测量是探究等离子体物理特性的重要手段之一。为研究激光诱导等离子体的辐射特性，采用1 064 nm的Nd∶YAG调Q固体激光器烧蚀合金钢样品产生等离子体，利用空间分辨装置测量二维空间的等离子体辐射光谱信号，通过分析可知实验采集的光谱信号是信号探测器测量路径上的积分光谱强度，由此计算得到的等离子体参数也是观测路径上的平均值。为了深入研究等离子体由内层到外层的辐射规律，首先测量得到等离子体路径积分光谱强度的横向空间分布，然后以等离子体为光学薄和圆柱对称的前提条件，采用三次样条函数算法对路径积分光谱强度进行Abel逆变换，反演得到等离子体由内层到外层谱线辐射率的径向空间分布。选取等离子体辐射光谱中的原子谱线Fe Ⅰ: 374.55 nm和Mn Ⅰ: 403.08 nm为研究对象，分析等离子体辐射光谱的空间分布特征，研究结果表明，等离子体辐射路径积分光谱强度的横向分布呈现出中心位置强度大边缘位置强度小的特征，这是由于等离子体膨胀扩张的结果引起的；通过Abel逆变换得到等离子体光谱辐射率的径向分布，结果表明等离子体从内层到外层谱线的辐射率经过了先增加后减小的变化规律，等离子体中心处出现辐射率的极小值，造成这种现象的主要原因是由于等离子体辐射源中心区域具有较低的电子密度；选取等离子体辐射光谱中Fe元素的11条原子谱线，采用Boltzman法分别由谱线相应的积分光谱强度和辐射率计算等离子体温度，得到等离子体温度的横向空间和径向空间的二维分布，两者具有类似的变化规律；由等离子体温度的横向空间分布可以看出，随着离样品表面距离的增加，等离子体温度呈现单调减小的趋势，等离子体中心到边缘区域等离子体温度逐渐降低，这是由等离子体膨胀扩张以及与环境气体相互作用共同的结果；由等离子体温度的径向空间分布可以看出等离子体由内层到外层等离子体温度逐渐降低，这是由于等离子体膨胀扩张冷却引起的。由此可见，采用Abel逆变换能够实现等离子体由内层到外层的辐射特性分析，为深入理解等离子体产生和演变的物理机理提供实验依据，从而为提高激光诱导击穿光谱技术的分析性能奠定理论基础。     

GaAlAs-GaAs半导体激光器增益参数的研究

通过对半导体激光器发射光谱的计算可获得激光器的增益谱.本文研究了不同电流注入下激光器的增益特性;激光器的峰值增益系数Gmax在阈值电流以下随注入电流的增大而提高,也随结温的升高而下降.     

杨-巴克斯特自旋1/2链模型的量子关联研究

量子系统各部分间的量子关联可以作为量子信息应用研究的基础资源. 而量子失协是度量量子关联大小的物理量. 由此研究杨-巴克斯特自旋1/2链模型的量子关联情况. 首先利用两个杨-巴克斯特方程的解得到相应的杨-巴克斯特自旋1/2链模型. 然后, 计算分析热平衡时杨-巴克斯特自旋1/2链模型的量子失协、几何量子失协和量子纠缠随着温度和外磁场的变化情况. 结果表明对于杨-巴克斯特自旋1/2链模型, 量子失协和几何量子失协能够比量子纠缠更好地度量量子关联.     

溶液中球形晶体溶解的分析

从物质溶液浓度变化角度考虑了球形晶体在溶液中溶解随表面张力的变化,利用渐近方法求出了在溶液中球形晶体溶解的浓度和界面的近似解析解,能够计算出溶解过程中球形晶体溶解的浓度、界面演化形态.研究了表面张力对于溶液中溶质浓度分布、球晶界面形态和溶解速度的影响.结果表明,表面张力促进了球形晶体在溶液中的溶解.随着表面张力参数增大,溶液中在界面前沿的溶质浓度升高,球形晶体的溶解速度增大;随着时间的增加,溶解速度逐渐变大,球形晶体半径逐渐变小,直至溶解结束.     

Kinetic equation for electrons of a semiconductor in a strong electric field: Green's resolvent

Using the Laplace transform of Boltzmann's equation, a system of linking equations is obtained for the series expansion of the mapping of the distribution function in powers of the field. Since the form of the equations is identical, instead of direct integration it is possible to use the method of Green's functions for the solution of the system. Using the method of perturbances Green's resolvent is constructed in the form of an infinite series. Using the example of the evaluation of the distribution function in a high-frequency field, the convergence of the proposed method is demonstrated.Translated from Izvestiya Vysshikh Uchebnykh Zavedenii, Fizika, Vol. 16, No. 7, pp. 22–25, July, 1973.     

复合场下优化产生粒子对能量分布宽度的特性研究

采用计算量子场论的方法,对振荡场加稳恒场的组合外场下真空中正反粒子对的产生特性进行了研究.通过一系列的对比得到当振荡场的宽度减小时,一方面可增加正反粒子对的产生量,另一方面也可减小正反粒子对的能量分布宽度从而得到能量单一性更好的粒子对.同时,通过分析产生量、能量分布宽度与振荡场宽度的关系可得出,仅在一定范围内减小振荡场的宽度可使能量分布更加集中,则能量分布宽度趋于某个极限值.因此,要得到产生量多且能量分布集中的正反粒子对应选择合适的参数,这可为今后的实验设计提供数据参考.     

圆形高斯镜平凹腔腔内外激光场研究

运用边界元素法把圆形高斯镜平凹腔的自再现模的衍射积分方程转化为有限阶矩阵方程。计算了圆形高斯镜取不同反射率膜斑半径和中心振幅反射率情况下基模的场强分布、相位分布和本征值。研究表明:腔内光场分布半径随反射率膜斑半径的减小而增大,中心振幅反射率不影响光场分布半径;反射率膜斑半径影响远场分布,当其数值较小时,在光束的远场分布主峰周围产生弱衍射环;当高斯镜中心全反射时,远场分布随反射率膜斑半径的变化无明显变化;模式本征值随反射率膜斑半径的增大而增大。     

Simulation of the destruction of a woodland massif by the shock wave generated by the impact of a large cosmic body

The interaction of shock waves with woodland massifs with consideration given to vegetation destruction is examined. The results of numerical simulations of the propagation of a perturbation through a vegetation massif based on solving the Euler equations for two-dimensional and axisymmetric cases are presented. This approach was used by the present author in simulating the propagation of wave fronts through woodland massifs without regard for forest stand destruction. The effect of vegetation is reproduced by introducing bulk forces in the volume occupied by forest. An initial perturbation of explosion-in-flight type was specified in the form of an increased-pressure region located at various heights from the ground surface. Simple threshold models are used to examine the effect of the dynamic pressure on vegetation destruction. A refined model was developed to investigate the change in the configuration of woodland massifs with consideration given to vegetation fall and the effect of this process on the rate of perturbation dissipation. The system of equations was solved by the Godunov method implemented using parallel programming. Numerical experiments were conducted with the use of two types of models of forest stand destruction, with various threshold values of the destruction factor, various initial perturbation intensities, and various heights above the vegetation massif. The effects arising during the interaction of a high-intensity perturbation with a woodland massif were identified. An analysis of the results showed that the destruction of vegetation occurs during its interaction with the fronts of the incident and reflected shock wave and with the jet core of the perturbation. In some cases, the model taking into account the accumulation of fallen vegetation predicts situations where destruction will occur only in the upper part of the forest stand, without touching the canopy. This effect can explain the existence of such regions in the area of the Tunguska event. It was also demonstrated that estimates of the sizes of the destruction zones obtained with the use of the models taking into account the influence of vegetation on the perturbation and destructibility differ substantially from those obtained within the framework of the models without regard for vegetation resistance. The highest range of perturbation dissipation was predicted by the models simulating the formation of obstructions.     

Dynamics of solidification in binary melts during rapid cooling I. The basic equations

In this paper we deal with the analysis of the general complex model which describes the solidification of the binary melt. Within the framework of this model we consider the mass and energy transport in the system and the kinetics of the phase transformation. The paper is divided into two parts. In the first part the set of equations is derived, which describe the evolution of the system within the framework of the theory of stochastic processes. The emphasis is laid on the rapid changes of temperature in the system. In the second part the analysis of the mentioned set of equations is presented. It results in the delimitation of the conditions under which the adiabatic approximation and the kinetic phase diagrams at the phase interface can be applied.     

废旧纺织品近红外光谱定量分析的新模型

根据废旧纺织品所含成分对它们做分类回收和处理可节省大量纺织原材料。目前，在废旧纺织品的回收过程中往往使用人工分拣方法。这种方法成本高且效率低。近红外光谱分析是21世纪发展最迅速的技术之一，可以在不破坏样本的情况下快速测定样本的成分及每种成分的含量。利用该技术对废旧纺织品进行分析，预先判断废旧纺织品所含的成分及各种成分的含量，可为废旧纺织品的大规模精细分类回收提供帮助。多模型方法通过将各子模型的预测值做加权平均得到最终的预测值，用该方法建立的近红外光谱分析模型一般具有较好的稳定性。以废旧纺织品样本的锦纶含量为例，先用多模型方法建立了锦纶含量的近红外光谱分析模型。方法如下：将反射率向量按照波长划分为15组。用每组数据建立一个近红外光谱分析子模型。对子模型的预测值做加权平均得出锦纶含量的最终预测值。然后在多模型方法基础上，根据锦纶含量预测值与实验值之间的近似线性关系，通过用变量代替常量并对变量做标准化处理，给出了一种便于优化的预测锦纶含量的近红外光谱分析新模型。优化后的每个子模型中的参数比优化前减少了6个，这样可防止模型过拟合。将上述两个模型与常见的用偏最小二乘法建立的模型进行了对比。交叉验证的结果表明：（优化后的）新模型的拟合优度的平均值为0.820 7，单纯使用多模型方法所建模型的拟合优度的平均值为0.769 1，用偏最小二乘法建立的模型的拟合优度的平均值为0.746 7。因此, 使用多模型方法建立的模型的预测效果好于用偏最小二乘法建立的模型的预测效果。新模型的预测效果明显好于其他两个模型的预测效果。该研究主要创新之处是新模型的建立和优化。文中建模方法有望用于废旧纺织品样本其他成分的含量预测。