粗生物油催化裂解制取低碳轻烯烃

利用La/HZSM-5催化剂,研究了催化裂解粗生物油及其模型化合物(包括甲醇、乙醇、乙酸、丙酮和苯酚)制取轻烯烃的过程. 获得的最大轻烯烃产率为0.19 kg/kg粗生物油. 研究表明,温度、重时空速和镧对HZSM-5分子筛的改性等因素可用来调制烯烃产率和选择性. 分子筛中添加镧,可适当的调节催化剂酸度和强弱酸位比例,从而提高烯烃选择性、产率和催化剂稳定性. 生物油制备轻烯烃的效率与原料的化学成分和氢碳有效比(H/Ce? )密切相关. 此外,比较了粗生物油催化裂解和热裂解过程,同时利用模型化合物研究了生物油转化为轻烯烃的相关反应历程和机理.     

生物油及生物质炭电催化制氢

报道了以生物质热裂解产物-生物油和生物质炭为原料,利用双固定床反应器和电催化水蒸气重整方法高效制氢过程研究．获得的最大绝对氢产率达到110.9 g H₂/1 kg干生物质,气相产物包括72%H₂、26%CO₂、1.9%CO和痕量的CH₄．研究了添加生物质炭对生物油制氢效果的影响,以及重整反应温度、通入催化床的电流等反应条件对生物油和生物质炭制氢效果的影响．结果表明,生物质炭的添加使绝对氢产率增加了大约20%～45%,提     

多种金属掺杂的镍基催化剂用于中温重整生物油制氢的设计

一种新的由共沉淀法合成的多种金属(铜、镁、铈)掺杂的镍基混合氧化物催化剂,在250～500 oC用于生物油高效重整制氢. 摩尔比为Ni:Cu:Mg:Ce:Al=5.6:1.1:1.9:1.0:9.9的催化剂表现出较高的催化重整活性,在传统的水蒸气重整模式和500 oC条件下,氢产率达82.8%;电催化重整模式中,在400 oC 和3.1 A,氢产率达91.1%.ECR模式中重整温度和通过催化剂电流促进生物油的重整和热裂解.另外催化剂在300～600 oC显示出较高的水煤气变化反应活性,生物油重整过程中催化剂性质的变化利用ICP、XRD、XPS和BET进行了表征. 生物油重整机理基于基元反应、催化剂表征进行了讨论.     

生物油制备生物质氢气和生物质燃料

研究了一种以生物质裂解油为原料制备氢气和生物燃料的催化转化过程。该过程包括生物油催化裂解制备氢气和生物合成气,合成气的调变,烯烃聚合和费脱合成耦合制备生物燃料。在优化反应条件下,氢气产率达到120.9 g H₂/（kg bio-oil）,烯烃聚合-费脱合成耦合反应形成的生物燃料产率达到526.1 g/（kg bio-syngas）。基于产物分析和催化剂特性表征,探讨了生物燃料合成过程中的反应路径和化学反应过程.     

用不同类型的分子筛催化剂催化转化生物油制烯烃

研究了用一系列不同类型的分子筛催化剂催化转化制取低碳烯烃的过程,测试的催化剂包括HZSM-5、MCM-41、SAPO- 34和Y型分子筛．按照低碳烯烃的绝对收率和选择性,催化剂的活性排序为：HZSM-5>SAPO-34>MCM-41>Y型分子筛．研究表明,使用HZSM-5分子筛催化剂,获得的生物油最大低碳烯烃收率约为0.22 kg/(kg生物油),低碳烯烃的选择性约为50%,且生物油几乎实现完全转化．同时还研究了反应条件对生物油制低碳烯烃的影响．为了弄清催化剂结构与和低碳烯烃形成之间的关系,对相关催化剂进行了详细表征,对生物油热裂解和催化裂解过程进行了详细比较．     

生物油催化裂解转化制取三苯

通过不同孔特征的分子筛(HZSM-5、HY沸石和MCM-41)实现生物油催化转化为三苯(苯、甲苯和对甲苯). 基于三苯的产率和选择性,芳香化合物逐次降低顺序为: HZSM-5>MCM-41>HY沸石.用HZSM-5催化裂解生物油产生芳香化合物的最大产率为33.1%,选择性为86.4%. 研究了反应条件对生物油催化裂解的影响,结合催化剂表征结果,讨论了催化剂的结构与性能之间的关系.     

Effects of Current on Microcosmic Properties of Catalyst and Reforming of Bio-oil

通过低温电催化重整方法(电流通过催化剂床),用传统的镍基重整催化剂NiO-Al2O3重整生物油制取氢气是一种高效的生物油产氢方法．还探索了电流对生物油重整的促进影响,发现通过催化剂的电流明显地提高了生物油的重整．通过BET、XRD、XPS和SEM的测试,研究了电流对催化剂微观结构的影响,包括比表面、孔径、孔体积、晶粒尺寸和氧化镍的还原程度．从通电的催化剂表面脱附的热电子直接由飞行时间质谱测量．讨论了电催化重整生物油的机理．     

有机盐对生物质快速热解油生成特性的影响

采用浸渍法制备了不同甲酸钙负载量的玉米秸秆样品,通过热解装置对其催化生物质快速热解生油能力进行评价,利用元素分析、GC-MS等技术分析了液体产物组分的变化规律,同时以微晶纤维素、木质素为模化物,深入研究了生物质组分间交互作用对甲酸钙催化热解特性的影响.结果 表明,纤维素与木质素间的交互作用对甲酸钙催化生物质热解生油过程具有促进作用,增强了生物质组分的裂解反应和加氢反应,当甲酸钙含量为5％时,生物油产率获得最大值为301.2 g·kg-1,与秸秆非催化热解相比增幅为6％.甲酸钙对生物油组分具有明显选择性,导致脂肪族化合物含量增加,酚类化合物含量显著降低,而交互作用对二者的形成分别产生了促进和抑制作用效果.     

基于生物炭载体催化剂的生物油重整制氢研究

本文以柳按生物质为原料,通过热裂解手段制得生物油及其副产物生物炭。通过化学活化对生物炭的表面性质进行改善。采用扫描电镜进行表征,研究表明活化炭经处理后的表面出现了大量孔隙结构。采用氮气物理吸附检测表明活化炭的孔结构主要集中在10 nm以下,4 nm附近。将活性金属Ni负载于活化后的生物炭上制得重整催化剂,并在生物油模化物重整制氢中表现出了良好的反应活性。尤其在高温段,在700℃时氢气产率接近100%。     

生物质催化转化制取芳香化合物

利用分子筛催化剂(NaZSM-5、HZSM-5、ReY和HY)研究了木屑上催化裂解制取芳香物(苯、甲苯、二甲苯)的反应过程,发现HZSM-5催化剂具有最高的生物质裂解制备芳香化合物的活性. 在450 oC、 载气流速为300 mL/min和催化剂/木屑比为2的优化反应条件下,芳香化合物的产率和选择性分别达到26.5%和62.5C-mol%.     

Self-organization of five species in a cyclic competition game

Cyclic competition game models, particularly the “rock–paper–scissors” model, play important roles in exploring the problem of multi-species coexistence in spatially ecological systems. We propose an extended “rock–paper–scissors” game to model cyclic interactions among five species, and find that two of the five can coexistent when biodiversity disappears, which is different from the “rock–paper–scissors” game. As the number of fingers is five, we named the new model the “fingers” game, where the thumb, forefinger, middle finger, ring finger, and little finger cyclically dominate their subsequent species and are dominated by their former species. We investigate the “fingers” model in two ways: direct simulations and nonlinear partial differential equations. An important finding is that the number of species in a cyclic competition game has an influence on the emergence of biodiversity. To be specific, the “rock–paper–scissors” model is in favor of maintaining biodiversity in comparison with the “fingers” model when the variables (population size, reproduction rate, selection rate, and migration rate) are the same. It is also shown that the mobility and reproduction rate can promote or jeopardize biodiversity.     

Contrastive analysis on tone between Putonghua and Taiwan Mandarin

The differences of the pitch and duration of Chinese syllables between Putonghua （PTH） and Taiwan Mandarin （TM） were studied. The speech materials to be used are not only isolated syllables, but also sentences. The results reveal that： For the isolated syllables, T1 and T2 in TM are influenced by Minnan dialect, therefore their pitch are lower than those in PTH. T3 is fall-rise in PTH, while it is fall in TM. Moreover, the syllable duration sequence for different tone is T3〉T2〉T1〉T4 in PTH, while it is T1〉T2〉T3〉T4 in TM. For the syllables in sentences, T2 is mid-rise in PTH, while it is mid-level in TM. And the T3 is longer than T4 but shorter than T1 or T2 in PTH, while it is the shortest in TM. Furthermore the effects of prosodic phrase boundary on duration for different tones are almost the same in PTH, but the lengthening part of T1 or T2 is longer than that of T3 or T4 in TM.     

Experimental study on downstep in Chinese intonation

Downstep in pitch contour of Chinese Putonghua is examined using subtly designed sentences by controlling tone combinations. The results show both automatic and nonautomatic downstep phenomena exist in Chinese. In non-automatic downstep, low tones compress downwards the pitch range of the following syllables. and the main influence of downstep is on topline. Low tone not only lower the topline behind it, but also raise the high tones before it, the effects are compatible with each other. In automatic downstep, the topline of pitch contour in intonational phrase is presented as a linear downtrend, but it differs among speakers due to the effect of personal stress practice. In comparison with downstep phenomenon in other tone or non-tone languages, the downstep ratio in Chinese is not constant, and the domain of downstep is not limited within the adjacent tones.     

Abelian-Higgs phase of SU(2) QCD and glueball energy

It is shown that SU(2) QCD admits an dual Abelian-Higgs phase, with a Higgs vacuum of a type-Ⅱ superconductor. This is done by using a connection decomposition for the gluon field and the random-direction approximation. Using a bag picture with soft wall, we presented a calculational procedure for the glueball energy based on the recent proof for wall-vortices [Nucl. Phys. B 741(2006)1].     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Signal generation in an isotropic medium in scanning electron acoustic microscope

Based on the research in Ref. [5][Materials Science and Engineering, 1989; A122： 57 63], an improved model of heat source is set up, the different modes of Lamb wave in an isotropic sample generated by a chopped electron beam at frequency f are obtained with integral transform and normal function expansion method, and the output signal of PZT coupled at the back surface of the sample is found out. The generation mechanism of SEAM （Scanning Electron Acoustic Microscopy） signal is discussed. It shows that the SEAM is a near field imaging technique with high spatial resolution and its best lateral spatial resolution is about 2√2α （α is the radius of the focused electron beam）. Some of experimental results of SEAM images are presented in the paper and it shows that the spatial resolution of SEAM is better than 0.5 μm and smaller than the thermal diffusion length of the sample. Therefore the character of near field imaging in SEAM is also proved experimentally.     

High efficiency filtering using two-dimensional photonic crystal coupled cavity structures

Transmission spectra of coupled cavity structures (CCSs) in two-dimensional (2D) photonic crystals (PCs) are investigated using a coupled mode theory, and an optical filter based on CCS is proposed. The performance of the filter is investigated using finite-difference time-domain (FDTD) method, and the results show that within a very short coupling distance of about 3λ, where λ is the wavelength of signal in vacuum, the incident signals with different frequencies are separated into different channels with a contrast ratio of 20 dB. The advantages of this kind of filter are small size and easily tunable operation frequencies.