Numerical study of point spread function of a fast neutron radiography system based on scintillating-fiber array

For a scintillating-fiber array fast-neutron radiography system, a point-spread- function computing model was introduced, and the simulation code was developed. The results of calculation show that fast-neutron radiographs vary with the size of fast neutron sources, the size of fiber cross-section and the imaging geometry. The results suggest that the following qualifications are helpful for a good point spread function: The cross-section of scintillating fibers not greater than 200μm×200μm, the size of neutron source as small as a few millimeters, the distance between the source and the scintillating fiber array greater than 1 m, and inspected samples placed as close as possible to the array. The results give suggestions not only to experiment considerations but also to the estimation of spatial resolution for a specific system.     

Development of a ferroelectric cathode diode

As a promising kind of high current cold cathode, the Ferroelectric Cathode （FEC） has several significant advantages, such as a controllable trigger time, lower vacuum requirement and large emitting area fabricability. The emitting current density of the FEC fabricated at Tsinghua University was more than 200 A/cm^2. In order to make the ferroelectric cathode into practical applications, a high current density diode using a ferroelectric cathode was designed, based on the PIC simulation. The performance of the FEC diode was investigated experimentally. When the applied diode voltage was 60 kV, a current density of more than 250 A/cm^2 was obtained, and the current density distribution was also measured.     

ORNL-HRIBF 6GHzECR离子源的最新结果

Experimental studies were conducted to characterize and improve the performance of the flat-B ECR ion source.The emittance of the source was investigated for the first time.The output beam currents of high-charge-states of Ar(q>8)were nearly doubled by increasing the plasma electrode aperture from 4mm to 6mm in diameter.To investigate possible enhancements with broadband microwave radiation,a"white"Gaussian noise generator was employed with a TWT amplifier to generate microwave radiation with a bandwidth of～200MHz.The performance of the flat-B ECR ion source was found to be much better with narrow bandwidth radiation when the source was operated in the flat-B region.However,the ion beam intensities and charge state distributions were improved with the broadband radiation when the source was tuned off the flat-B region.     

Design and experimental study of a two-dimensional position sensitive X-ray detector

A prototype of a two-dimensional position sensitive X-ray detector was designed and constructed for small angle X-ray scattering experiments at BSFR (Beijing Synchrotron Radiation Facility). The detector is based on MWPC with cathode strip readout, and has a sensitive area of 200 mm×200 mm. The spatial resolution (FWHM) of about 210 μm along the anode wire direction was obtained from the ⁵⁵Fe X-ray test of the detector.     

Production and Identification of New Isotope ^265Bh（Z=107）

New Isotope ^265Bh was produced in bombardment of a ^243Am target with 168 MeV 26Mg ions. The experiment was carried out at the Sector Focus Cyclotron of Heavy Ion Research Facility in Lanzhou in 2003. The reaction products were transported and collected by using helium-jet technique and a set of rotating wheel system. Identification was made by observation of correlated a-particles between the new isotope ^265Bh and its ^261Db and ^257Lr daughter nuclei. A parent-daughter searching mode was used to facilitate detection of α-α correlations. A total of four pairs of PIPS detector (200mm^2 active area) were used to measure the kinetic energy of a particles. The a particle energy resolution was about 40 keV for the top detectors and 100 keV for the bottom detectors because of energy degradation in the polypropylene foil.     

Design and test of SX-FEL cavity BPM

This paper reports the design and cold test of the cavity beam position monitor （CBPM） for SX-FEL to fulfill tile requirement of beam position measurement resolution of less than 1 p_m, even 0.1 btm. The CBPM was optimized by using a coupling slot to damp the TM010 mode in the output signal. Tile isolation of TM01o mode is about 117 dB, and the shunt impedance is about 200 ~@4.65 GHz with the quality factor 80 from MAFIA simulation and test result. A special antenna was designed to load power for reducing excitation of other modes in the cavity. The resulting output power of TM110 mode was about 90 mV/mm when the source was 6 dBm, and the accomplishable minimum voltage was about 200 btV. The resolution of the CBPM was about 0.1 btm from the linear fitting result based on the cold test.     

Micro-fabrication and hermeticity measurement of alkali-atom vapor cells based on anodic bonding

A vapor cell provides a well-controlled and stable inner atmosphere for atomic sensors, such as atomic gyroscopes, atomic magnetometers, and atomic clocks, and its hermeticity affects the stability and aging of atomic sensors. We present the micro-fabrication of a micro-electromechanical system wafer-level hermit vapor cell based on deep reactive ion etching and vacuum anodic-bonding technology. The anodic-bonding process with the voltage increasing in steps of 200 V had a critical influence on vapor cell hermeticity. Further, the silicon–glass bonding surface was experimentally investigated by a scanning electron microscope, which illustrated that there were no visual cracks and defects in the bonding surface. The leak rate was measured using a helium leak detector. The result shows that the vapor cells with different optical cavity lengths comply with the MIL-STD-883 E standard(5 × 10~(-8) mbar·L/s). Moreover, D2 absorption spectroscopy was characterized via optical absorption. The bonding strength was determined to be 13 MPa, which further verified the quality of the vapor cells.     

SETUP AND APPLICATION OF SCANNING NEAR-FIELD OPTICAL MICROSCOPY

The research on the setup and application of scanning near-field optical microscopy (SNOM) performed in our laboratory is reviewed in this report. We have constructed a versatile low temperature scanning near-field optical microscope with the capability of near-field imaging and spectroscopy, operating at liquid nitrogen temperature. A special designed coaxial double lens was used to introduce the illumination beam through a 200μm fiber; the detected optical signal was transmitted via a fiber tip to an avalanche photon detector. The performance test shows the stability of the new design. The shear force image and optical image of a standard sample are shown. A system of SNOM working at room temperature and atmosphere was used to characterize semiconductors and bio-molecular samples. It revealed the unique features of semiconductor microdisks in the near-field that is significantly different from that of far-field. The effects of different geographic microstructures on the near-field light distribution of InGaP, GaN, and InGaN multi-quantum-well microdisk were observed.     

Simulated Melting Curve of NaC1 up to 200 kbar

The melting curve of NaCI is studied up to 200 kbar by means of the shell-model molecular dynamics method, usiug massive shell core interaction potentials. The model for the interatomic interaction is shown to produce reasonable results at a wide range of pressures in bulk transitions. The pressure dependence of the melting curve of NaCl was calculated and the result was modified on the assumption of overheating due to the small system size and small time scale simulation. The final result is in good agreement with the corrected experimental values, accounting for melting mechanisms such as surface heating or superheating. Therefore, it is believed that bulk transition simulation at constant pressure indeed provides a useful tool for studying the melting transition.     

Physical design of FEL injector based on the performance-enhanced EC-ITC RF gun

To meet the requirements of high performance THz-FEL (Free Electron Laser), a compact scheme of FEL injector was proposed. A thermionic cathode was chosen to emit electrons instead of a photo-cathode with its complex structure and high cost. The effective bunch charge was improved to ～200 pC by adopting an enhanced EC-ITC (External Cathode Independently Tunable Cells) RF gun to extract micro-bunches; back bombardment effects were almost eliminated as well. Constant gradient accelerator structures were designed to improve energy to ～14 MeV, while the focusing system was applied for emittance suppressing and bunch state maintenance. The physical design and beam dynamics of the key components for the FEL injector were analyzed. Furthermore, start-to-end simulations with multi-pulses were performed using homemade MATLAB and Parmela. The results show that continual high brightness electron bunches with a low energy spread and emittance could be obtained stably.     

The Baikal Neutrino Telescope

We review the present status of the Baikal Neutrino Experiment and present results of a search for upward-going atmospheric neutrinos and magnetic monopoles obtained with the detector NT200. The results of a search for very high energy neutrinos are presented and an upper limit on the extraterrestrial diffuse neutrino flux is obtained. We describe the strategy of upgrading the NT200 to NT200+ and creating a detector on the Gigaton scale at Lake Baikal. The first results obtained with the new NT200+ detector as a basic cell of a future Gigaton detector are presented. The text was submitted by the authors in English.     

200 kV/200 kA脉冲源的研制

研制了一台200 kV/200 kA脉冲源,脉冲源由初级储能单元、水介质整形与传输单元、气体开关和负载组成。通过优化设计由2 到1 的水介质变阻抗线、高压气体主开关和陡化开关,使得脉冲功率源在匹配负载下产生输出电压200 kV、电流200 kA、前沿40 ns、脉宽40 ns的高压脉冲。在此脉冲源平台上已开展了低阻抗1 二极管发射特性研究,并且将在高压气体开关、同步触发、二极管等离子体发射诊断等方面发挥作用。     

Annealing effect on ion-beam-sputtered titanium dioxide film

We found that the extinction coefficient of ion-beam-sputtered titanium dioxide films first decreased with increasing annealing temperature then increased drastically when annealing temperature was increased above ~200 degrees C for 24 h of annealing time. The decreasing extinction coefficient with annealing temperature was attributed to a reduction in absorption owing to oxidation of the film by annealing. The film structure remained amorphous to 200 degrees C annealing temperature. The drastic increase of extinction coefficients above ~200 degrees C was associated with the appearance of an anatase polycrystalline structure and was attributed to scattering by the polycrystalline structure. With shorter annealing time the transition temperature from amorphous to polycrystalline anatase was higher. Guidance for reducing the optical loss of laser mirrors is proposed.     

Investigation on Changes in the Miscibility,Morphology, Rheology and Mechanical Behavior of Melt Processed Cellulose Acetate through Adding Polyethylene Glycol as a Plasticizer

Polyethylene glycol (PEG 200) was used as an eco-friendly plasticizer for preparing thermoplastic cellulose acetate (CA) by a twin-screw extruder. The plasticization efficiency of PEG 200 was compared with that of triethyl citrate (TEC). The interaction between polyethylene glycol and CA was investigated by Fourier transform infrared spectroscopy (FT-IR) and differential scanning calorimetry (DSC). Both FT-IR and DSC proved that PEG 200 could form stable and strong hydrogen bonds with CA molecules. Scanning electron microscopy (SEM) revealed that the CA granules were completely disrupted during the extrusion and a continuous and homogeneous phase was observed. The PEG 200-plasticized cellulose acetate (PCA) showed greater viscosity reduction than TEC-plasticized cellulose acetate (TCA) at the same additive levels. Furthermore, the Izod-notched impact strength and elongation at break of PCA were higher than those of TCA. The tensile strength, Izod-notched impact strength and elongation at break of PCA containing 25 wt% PEG 200 reached 31.6 MPa, 20.9 KJ/m² and 80.5%, respectively, as compared to 39.2 MPa, 10.9 KJ/m² and 32.3% for 25 wt% TEC plasticized CA.     

7.5-MHz data-transfer rate with a planar aperture mounted upon a near-field optical slider

We fabricated a planar aperture-mounted (PAM) slider by use of a focused ion beam to demonstrate fast data acquisition for near-field optical data storage. The aperture (200 nm x 500 nm) was formed upon the Ti-coated air-bearing surface of the slider and was directly illuminated with a laser (lambda = 532 nm) beam spot by use of an objective lens (N.A., 0.55). The light transmitted through the aperture was modulated by a Ti-coated SiO(2) disk with 200- and 400-nm-wide line-and-space (L&S) patterns engraved by electron-beam lithography. The optical throughput of the taperless aperture was greater than 0.02. By use of the PAM slider, 400- and 200-nm L&S signals were detected at linear velocities of 6 and 3 m/s, respectively, corresponding to a data-transfer rate of 7.5 MHz.     

13μs,200ns和2ns脉冲电场对酵母菌杀灭效果分析

研究了脉冲宽度对高压脉冲下细胞膜和细胞器膜跨膜电压的影响及细胞膜能量的变化,以及13μs,200ns和2ns脉冲对酿酒酵母(CICC31180)杀灭作用时脉冲数的影响。结果表明,随着脉冲数增加,13μs,200ns和2ns脉冲对啤酒酵母的灭杀效果均增强。在13μs脉宽,14kV电压和50个脉冲数下,酵母达到最小存活率-4.3个对数;在200ns脉宽,40kV电压和500个脉冲数下,酵母达到存活率-2.6个对数;在2ns脉宽,200kV电压和500个脉冲数下,酵母达到存活率-2.8个对数。三种脉冲对酵母菌杀灭的存活率对数与脉冲数的关系表现不是线性的,脉冲数增加到一定程度,存活率下降变缓。在同等灭杀效果-2.0个对数下,2ns脉冲比13μs脉冲在同轴电极中损耗的能量更少。     

高压对米曲霉理化性质影响及诱变的研究

 在100~400 MPa压力、保压20 min的条件下处理酱油酿造菌种——米曲霉,研究高压对米曲霉存活率、形态特征、生理性质、蛋白酶、淀粉酶活性等的影响,并诱变筛选优良菌株。结果表明：高压对米曲霉的存活率、形态特征有明显的影响;压力对蛋白酶及淀粉酶活性的影响也有特异的规律,即在一定压力范围内（0.1~200 MPa）蛋白酶的活性随着压力的增加而减小,但随着压力的进一步升高（200~400 MPa）蛋白酶的活性又逐渐增强,在300 MPa时超过对照组,400 MPa时蛋白酶的活性达到最高值;淀粉酶在0.1~100 MPa时活性下降,在200 MPa时其平均的糊化和糖化活性最强、活力最高,当压力升高活性又开始降低,400 MPa时几乎又回到对照值。另外,高压处理后获得一株理想的变异菌株HP300a：生长速度快、孢子数量多、蛋白酶活力高,且不易被杂菌污染。其成曲的几项主要指标均优于对照株,酿出酱油的几项主要指标也明显优于对照株。为利用高压诱变筛选米曲霉优良菌种、提高酿造酱油产品的产量及质量提供了理论依据,并发现了高压处理米曲霉引起其蛋白酶及淀粉酶活性改变的特殊规律。     

Design and experimental study of a two-dimensional position sensitive X-ray detector

A prototype of a two-dimensional position sensitive X-ray detector was designed and constructed for small angle X-ray scattering experiments at BSFR (Beijing Synchrotron Radiation Facility). The detector is based on MWPC with cathode strip readout, and has a sensitive area of 200 mmx200 mm. The spatial resolution (FWHM) of about 210 μm along the anode wire direction was obtained from the 55Fe X-ray test of the detector.     

CW dye laser operation at 200 W pump power

A continuously operating jet stream dye laser was pumped by a multiwavelength-multimode argon-ion-laser with a pump power up to 200 W. Rhodamine 6G-chloride was dissolved in a water-polyvinylalcohol-ammonyx solution. The dye laser was prism-tunable between 560 and 650 nm with maximum output power at 600 nm. The maximum output power of the cw dye laser was 43 W without tuning element and 33 W with a prism placed inside the cavity. Operation of a jet stream dye laser with a pump power higher than 200 W and an efficiency of about 30% seems to be possible.     

1.55 μm InGaAsP/InP tapered stripe superluminescent diodes with potential optical sensor system applications

We proposed a structure of a 1.55 μm InGaAsP/InP superluminescent diode (SLD) to suppress the lasing action and fabricated laterally tilted multi-quantum well planar buried heterostructure separate confinement heterostructure SLD by using MOCVD and LPE equipments. The fabricated SLD is laterally tilted by 15°. The output power of SLD was 11 mW for 200 mA under pulse driving. The full-width at half-maximum was 42 nm at 200 mA.