对质子滴线核19Na的β延迟质子衰变的首次观察

由²⁰Ne(P,2n)¹⁹Na反应,对质子滴线核¹⁹Na进行了研究,实验在中国科学院高能物理研究所质子直线加速器上进行,首次观察到了¹⁹Na的β延迟质子衰变,测定其质子能量为1.10±0.08MeV,半衰期为47±20ms,它相应于¹⁹Na基态到¹⁹Ne的7.62MeV、T=3/2同位旋相似态的超允许β跃迁和由此态到¹⁸F基态的级联质子衰变.     

对69Krβ延迟质子衰变的观察

通过对³²S+Ca反应中衰变质子谱的观测,发现了一组新的质子谱线,其能量为(4.07±0.05)MeV,对应的衰期为(32±10)ms,经反应道分析及与理论预言比较,确定该质子活性来源于⁴⁰Ca(³²S,3n)反应产生的⁶⁹Kr的β延迟质子衰变,它相应于由⁶⁹Br中的T=3/2同位旋相似态到⁶⁸Se基态的质子跃迁.基于测量结果与库仑位移能计算,得到⁶⁹Kr的质量剩余为(－32.15±0.30)MeV,并提出了⁶⁹Kr的部分衰变纲图.     

133Sm和149Yb的β缓发质子衰变

利用⁴⁰Ca+⁹⁶Ru融合蒸发反应产生了近质子滴线核¹³³Sm, 配合氦喷嘴带传输系统采用“质子-γ”符合方法观测了它们的β缓发质子衰变, 其中包括半衰期、质子能谱、第二代子核低位态之间的γ跃迁, 并估计出衰变到第二代子核不同低位态的分支比. 通过统计理论拟合上述实验数据, 指认了¹³³Sm的自旋宇称的可能范围. 并用Woods-Saxon Strutinsky方法计算了限制组态的¹³³Sm的核势能面, 通过对比发现¹³³Sm的自旋宇称可能有两种成分:5/2⁺和1/2^－. 这一结果与2001年发表的¹³³Sm(EC+β⁺)衰变的简单衰变纲图是相容的. 此外用同一方法分析了2001年Eur. Phys.J.A12:1—4中发表的有关¹⁴⁹Yb的β缓发质子衰变实验数据, 由此指认了¹⁴⁹Yb的基态自旋宇称为1/2^－.     

合成和研究稀土区质子滴线附近的6种新核素

利用兰州重离子加速装置(HIRFL)的SFC加速器引出的能量为165—180MeV的³⁶Ar重离子束,分别轰击⁹²Mo、⁹⁶Ru和¹⁰⁶Cd缺中子同位位素靶,产生了稀土区质子滴线附近的新核素¹²⁵Nd、¹²⁸Pm、¹²⁹Sm、¹³⁷Gd、¹³⁹Dy和¹³⁹Tb.借助高灵敏度的氦喷嘴快速带传输系统和“p–γ”或“X–γ”符合测量方法对它们进行了分离鉴别,确定它们的半衰期分别为(0.60±0.15)s,(1.0±0.3)s,(0.55±0.10)s,(2.2±0.2)s,(0.6±0.2)s和(1.6±0.2)s,并测量了¹²⁵Nd、¹²⁸Pm、¹²⁹Sm、¹³⁷Gd和¹³⁹Dy的β延发质子能谱,指认了能量为109.0和119.7keV的两条γ射线属于¹³⁹Tb的EC/β+衰变.     

Ba/Fe-堇青石固溶体(Ba0.05Fe0.1Mg)2Al4Si5O18的组合筛选及红外辐射性能优化

采用组合材料方法制备并筛选了具有高红外辐射性能的Ba/Fe共掺堇青石固溶体(Ba_0.05Fe_0.1Mg)₂Al₄Si₅O₁₈. 通过组合溶液喷射法,制备了7×7阵列的样品库,并在不同温度下进行热处理.通过X射线衍射、红外热成像等测试方法分析了Ba²⁺、Fe³⁺固溶对堇青石晶格畸变和红外辐射性能的影响. 经过放大制备实验的验证,确定了材料的最佳组分为5%Ba²⁺和10%Fe³⁺共固溶的堇青石. 最佳组分样品在100 oC时的红外辐射率在5-24 μm波段均高于0.8.     

LiKGdF5:Er,Dy单晶的UV、VUV光谱和量子剪裁

报道了LiKGdF₅:Er(2%),Dy(0.4%)单晶在紫外激光和同步辐射真空紫外光激发下的光谱特性,讨论了在不同激光(He-Cd激光,325nm;3倍频的YAG:Nd激光,355nm)激发下Er³⁺离子和Dy³⁺离子的相对发射强度及其物理原因.通过真空紫外区激发光谱的测量,确定了Dy³⁺离子的4f⁸5d吸收带以及Er³⁺离子的4f¹⁰5d吸收带的能量位置.实验结果表明,用156.6nm的高能光子激发Er³⁺离子的4f¹⁰5d吸收带,可以产生量子效率高达200%的量子剪裁现象,并给予了合理的解释.     

Manganese location and magnetic structure determination of SrMn2—W hexagonal ferrite by means of neutron diffraction

The Mn cation distribution in the seven sublattices of theW-type structure has been determined from high temperature neutron diffraction data of a SrMn₂Fe₁₆O₂₇ powder sample. The Mn²⁺ ions enter the tetrahedral sites of blockS with a preference for site 4e. Mn³⁺ ions in small amounts are found in the octahedral sites, substituting for Fe³⁺, while 0.3 Fe²⁺ has been found in site 6g. The sample has the formula SrMn_2.4Fe_15.6O₂₇. The crystal structure has been described in the non-centrosymmetric Pˉ62c space group, instead of the usual P6₃/mmc one. The magnetic structure, obtained from low temperature (4.2 K) data, is collinear, with the spins parallel to thec axis, according to the Gorter model. The magnetic moments of the sites give an experimental magnetization valueM _s=28.4(1.5) μ_B/f.u., in good agreement with magnetic measurements and the theoretical value.     

锂铌比对铪铁铌酸锂晶体全息存储性能的影响

以掺杂4 mol%Hf⁴⁺的LiNbO₃:Fe:Hf系列晶体（[Li]/[Nb]比变化）为研究对象,研究了系列晶体的可见吸收光谱,在632.8nm的写入光下晶体的衍射效率、灵敏度和抗光散射能力在不同[Li]/[Nb]下的变化规律.研究发现Hf⁴⁺的浓度达到阈值浓度后,随着[Li]/[Nb]比的增大,晶体的可见吸收边会发生红移,而且晶格中[Fe²⁺]/[Fe³⁺]也会增加,这就导致随着[Li]/[Nb]比的增加,样品的衍射效率逐渐减小,写入时间缩短,灵敏度增大.同时,在晶体中,随着[Li]/[Nb]的增大,陷阱中心Fe²⁺Li数量增大会使得晶体抗光散射能力减弱.     

EPR Study of Fe3+- and Ni2+-Doped Macroporous CaSiO3 Ceramics

Thermally stable macroporous CaSiO₃, Fe³⁺- and Ni²⁺-doped (0.5 to 5 mol%) ceramics have been prepared by solution combustion process by mixing respective metal nitrates (oxidizers), fumed silica. Diformol hydrazine is used as a fuel. The combustion products were identified by their X-ray diffraction and thermal gravimetry/differential thermal analysis. Single phases of β-CaSiO₃ and α-CaSiO₃ were observed at 950 and 1200 °C, respectively. The phase transition temperatures of combustion-derived CaSiO₃ were found to be lower compared to those obtained via solid-state reaction method. It is interesting to note that with an increase in the calcination temperature the samples become more porous with an increase in the pore diameter from 0.2 to 8 μm. The electron paramagnetic resonance (EPR) spectrum of Fe³⁺ ions in CaSiO₃ exhibits a weak signal at g = 4.20 ± 0.1 followed by an intense signal at g = 2.0 ± 0.1. The signal at g = 4.20 is ascribed to isolated Fe³⁺ ions at rhombic site. The signal at g = 2.0 is due to Fe³⁺ coupled together with dipolar interaction. In Ni²⁺-doped CaSiO₃ ceramics the EPR spectrum exhibits a symmetric absorption at g = 2.23 ± 0.1. This deviation from the free electron g-value is ascribed to octahedrally coordinated Ni²⁺ ions with moderately high spin–orbit coupling. The number of spins participating in resonance and the paramagnetic susceptibilities have been evaluated from EPR data as a function of Fe³⁺ as well as Ni²⁺ content. The effect of alkali ions (Li, Na and K) on the EPR spectra of these ceramics has also been studied. Authors' address: R. P. Sreekanth Chakradhar, Glass Technology Laboratory, Central Glass and Ceramic Research Institute, Kolkata 700032, India     

93Pd的β缓发质子衰变

通过⁵⁸Ni(⁴⁰Ca,3n2p)反应合成等待点核⁹³Pd,采用氦喷嘴带传输系统加p-γ符合,观测到了它的β缓发质子衰变,测得其半衰期为(1.3±0.2)s.采用统计模型计算拟合了实验测得的β缓发质子能谱和布居到质子发射体子核不同终态的分支比,指认了⁹³Pd的基态自旋为9/2.用Woods-Xason Strutinsky方法计算了⁹³Pd的核位能面,其结果表明93?Pd基态自旋宇称可能为9/2⁺.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.