纳米ZnO薄膜的激子光致发光特性

报道了纳米ZnO薄膜激子光致发光(PL)与温度的关系。首先利用低压金属有机化学气相沉积(LPMOCVD)技术生长ZnS薄膜,然后将ZnS薄膜在氧气中于800℃下热氧化2h获得纳米ZnO薄膜。X射线衍射(XRD)结果表明,纳米ZnO薄膜具有六角纤锌矿多晶结构且具有择优(002)取向。室温下观察到一束强的紫外(326eV)光致发光(PL)和很弱的深能级(DL)发射。根据激子峰的半高宽(FWHM)与温度的关系,确定了激子纵向光学声子(LO)的耦合强度(ГLO)。     

Influence of buffer layer thickness on the structure and optical properties of ZnO thin films

A series of ZnO thin films were deposited on ZnO buffer layers by DC reactive magnetron sputtering. The buffer layer thickness determination of microstructure and optical properties of ZnO films was investigated by X-ray diffraction (XRD), photoluminescence (PL), optical transmittance and absorption measurements. XRD results revealed that the stress of ZnO thin films varied with the buffer layer thickness. With the increase of buffer layer thickness, the band gap edge shifted toward longer wavelength. The near-band-edge (NBE) emission intensity of ZnO films deposited on ZnO buffer layer also varied with the increase of thickness due to the spatial confinement increasing the Coulomb interaction between electrons and holes. The PL measurement showed that the optimum thickness of the ZnO buffer layer was around 12 nm.     

The structure and optical properties of SiC film on Si (111) substrate with a ZnO buffer layer by RF-magnetron sputtering technique

We have fabricated a multiply layer SiC/ZnO on Si substrates using the RF-magnetron sputtering technique with the targets of a single crystalline SiC and a polycrystalline ZnO. The as-deposited films were annealed in the temperature range of 600–1000 °C under nitrogen ambient. We have observed a strong ultraviolet (UV) emission (370 nm) from the as-deposited SiC/ZnO film and an intense violet emission (412 nm) from the film annealed at high temperature (1000 °C) under nitrogen ambient. The SiC film quality and the PL intensities are considered to be strongly dependent on the crystalline quality of the ZnO buffer layer. With the increase of the annealing temperature, the crystalline quality of the ZnO buffer layer is improved, resulting in the improvement of the SiC film quality and the increase of the PL intensities. The thin films have been characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM) to provide the evidences of photoluminescence (PL). We suggest that the UV emission could be attributed to the nanocrystal silicon particles, that the 395 nm band is related to ZnO buffer layer and has a great relation to the crystalline quality of the ZnO film, and that the violet emission is associated with the emission luminescence from 6H-SiC, which bears on the SiC film quality. The obtained results are expected to have important applications in modern optoelectronic devices.     

氧气压强对PLD制备MgZnO薄膜光学性质的影响(英文)

使用准分子脉冲激光沉积(PLD)方法在Si(100)基片上制备了高度c轴取向的MgZnO薄膜。分别使用SEM、XRD、XPS、PL谱和吸收谱表征了薄膜的形貌、结构、成分和光学性质。实验发现氧气压强对MgZnO薄膜的结构和光学性质有重要影响。当氧气压强由5 Pa增大到45 Pa时,薄膜的PL谱紫外峰蓝移了86meV,表明氧气压强的增大提高了MgZnO薄膜中Mg的溶解度。在15 Pa氧气压强下制备的薄膜显示了独特、均匀的六角纳米柱状结构,其PL谱展示了优异的发光特性,具有比其他制备条件下超强的紫外发射和微弱的可见发光。500~600 nm范围内的绿光发射,我们讨论其机理可能源于深能级中与氧相关的缺陷。使用PLD得到纳米柱状结构表明:优化制备条件,可望使用PLD制备ZnO纳米阵列的外延衬底;可使用PLD技术开发基于ZnO纳米结构的高效发光器件。     

Ti缓冲层及退火处理对Si(111)基片上生长的ZnO薄膜结构和发光特性的影响

采用反应磁控溅射法在Si（111）基片上制备了带有Ti缓冲层的高c轴取向ZnO薄膜.通过X射线衍射分析和光致荧光光谱测量,研究了Ti缓冲层厚度和退火处理对ZnO薄膜结晶质量和光致荧光特性的影响.研究结果表明,Ti缓冲层的引入可以有效改善Si基片上ZnO薄膜的发光性能,但缓冲层存在一个最佳的厚度.薄膜应力是影响ZnO薄膜紫外荧光发射性能的重要因素,较小的残余应力对ZnO薄膜的紫外荧光发射是有利的,残余应力的存在可以改变ZnO薄膜紫外荧光发射能量.随着退火温度的增加,薄膜中的张应力增大,导致带隙宽度减小以及激子复合跃迁峰逐渐向低能方向移动. 关键词： ZnO薄膜 缓冲层 退火处理 应力分析     

A simple growth route towards ZnO thin films and nanorods

Highly orientated ZnO thin films and the self-organized ZnO nanorods can be easily prepared by a simple chemical vapor deposition method using zinc acetate as a source material at the growth temperature of 180 and 320 °C, respectively. The ZnO thin films deposited on Si (100) substrate have good crystallite quality with the thickness of 490 nm after annealing in oxygen at 800 °C. The ZnO nanorods grown along the [0001] direction have average diameter of 40 nm with length up to 700 nm. The growth mechanism for ZnO nanorods can be explained by a vapor-solid (VS) mechanism. Photoluminescence (PL) properties of ZnO thin films and self-organized nanorods were investigated. The luminescence mechanism for green band emission was attributed to oxygen vacancies and the surface states related to oxygen vacancy played a significant role in PL spectra of ZnO nanorods.     

Optical Analysis of Nanocrystalline ZnO Films Coated on Porous Silicon by Radio Frequency (RF) Magnetron Sputtering

Zinc oxide thin films have been deposited onto porous silicon (PSi) substrates at high growth rates by radio frequency (RF) sputtering using a ZnO target. The advantages of the porous Si template are economical and it provides a rigid structural material. Porous silicon is applied as an intermediate layer between silicon and ZnO films and it contributed a large area composed of an array of voids. The nanoporous silicon samples were adapted by photo electrochemical (PEC) etching technique on n-type silicon wafer with (111) and (100) orientation. Micro-Raman and photoluminescence (PL) spectroscopy are powerful and non-destructive optical tools to study vibrational and optical properties of ZnO nanostructures. Both the Raman and PL measurements were also operated at room temperature. Micro-Raman results showed that the A₁(LO) of hexagonal ZnO/Si(111) and ZnO/Si(100) have been observed at around 522 and 530 cm^–1, re- spectively. PL spectra peaks are distinctly apparent at 366 and 368 cm^–1 for ZnO film grown on porous Si(111) and Si(100) substrates, respectively. The peak luminescence energy in nanocrystalline ZnO on porous silicon is blue-shifted with regard to that in bulk ZnO (381 nm). The Raman and PL spectra pointed to oxygen vacancies or Zn interstitials which are responsible for the green emission in the nanocrystalline ZnO.     

Photoinduced Effects in the ZnO Luminescence Spectra

The effect of intense UV irradiation on the photoluminescence (PL) spectra of ZnO powders and nanocrystalline films obtained by atomic layer deposition (ALD) was investigated. At room temperature, the behavior of the spectra under continuous UV irradiation in multiple vacuum-atmosphere cycles was studied. The changes in the intensities of exciton radiation and radiation in the “green” band region, associated with the phenomena of oxygen photodesorption and photoadsorption, are discussed. In the temperature range of 5–300 K, the effect of strong UV irradiation on the near-edge luminescence spectrum of ZnO films was studied. The nature of a new line arising in the photoluminescence spectra of an irradiated film in the region of emission of bound excitons is discussed.

     

纳米ZnO薄膜可见发射机制研究

利用溶胶－凝胶法 （Sol-Gel）制备了纳米ZnO薄膜，获得了高强的近紫外发射室温下测量了样品的光致发光谱(PL )、吸收谱(ABS)、X射线衍射谱(XRD).X射线衍射(XRD)的结果表明：纳米ZnO薄膜呈多晶态，具有六角纤锌矿结构和良好的C轴取向；发现随退火温度升高，（002）衍射峰强度显著增强，衍射峰的半高宽（FWHM）减小、纳米颗粒的粒径增大.由吸收谱(ABS)给出了样品室温下带隙宽度为3.30 eV.在PL谱中观察到二个荧光发射带，一个是中心波长位于392 nm附近强而尖的紫带，另一个是519 nm附近弱而宽的绿带研究了不同退火温度样品的光致发光峰值强度的变化关系，发现随退火温度升高，紫带峰值强度增强、绿带峰值强度减弱，均近似呈线性变化.证实了纳米ZnO薄膜绿光发射主要来自氧空位(Vo)形成的浅施主能级与锌空位(VZn)形成的浅受主能级之间的复合，或氧空位(Vo)形成的深施主能级上的电子至价带顶的跃迁；紫带来自于导带中的电子与价带中的空位形成的激子复合.     

MgZnO薄膜及其量子阱和超晶格的发光特性

MgO和ZnO形成合金Mg_xZn_1-xO的带隙可以在3.3～7.9eV之间变化,在制备紫外波段光电器件方面有着广阔的应用前景.由ZnO和MgZnO交替沉积而成的ZnO/Mg_xZn_1-xO量子阱和超晶格在激光器、光探测器和其他光电器件方面也有潜在的应用价值.回顾最近几年对MgZnO薄膜材料发光特性的研究进展,介绍在不同衬底上用不同方法制备MgZnO合金薄膜的制备技术、发光特性以及发光特性与薄膜中Mg含量的关系;综述近年来在ZnO/Mg_xZn_1-xO超晶格、量子阱研究上的成果,特别介绍了ZnO/Mg_xZn_1-xO对超晶格、量子阱的发光特性、发光机理以及发光特性与势垒层镁含量、器件温度的关系.     

CVD两步法生长ZnO薄膜及其光致发光特性

用CVD两步法在常压下于p型Si(100)衬底上沉积出具有较好择优取向的多晶ZnO薄膜。在325nm波长的光激发下,室温下可观察到显著的紫外光发射(峰值波长381nm)。高温退火后氧空位缺陷浓度增加,出现了一个450~600nm的绿光发光带,发光峰值在510nm。作为比较,用一步法生长的ZnO薄膜结晶质量稍差。在其PL谱中不仅有峰值波长389nm的紫外发射而且还出现了一个很强的蓝光发光中心(峰值波长437nm),退火后同样产生绿光发光带。对这两种绿光发光带的发光机制进行了研究,认为前者源于VO,而后者与O_Zn有密切的关系。     

Luminescence mechanism of ZnO thin film investigated by XPS measurement

The effects of annealing environment on the luminescence characteristics of ZnO thin films that were deposited on SiO₂/Si substrates by reactive RF magnetron sputtering were investigated by X-ray photoelectron spectroscopy (XPS) and photoluminescence (PL). An analysis of the O 1s peak of ZnO film revealed that the concentration of oxygen vacancies increased with the annealing temperature from 600 °C to 900 °C under an ambient atmosphere. The PL results demonstrated that the intensity of green light emission at 523 nm also increased with temperature. Under various annealing atmospheres, the analyses of PL indicated that only one emission peak (523 nm) was obtained, indicating that only one class of defect was responsible for the green luminescence. The green light emission was strongest and the concentration of oxygen vacancies was highest when the ZnO film was annealed in ambient atmosphere at 900 °C. The results in this investigation show that the luminescence mechanism of the emission of green light from a ZnO thin film is associated primarily with oxygen vacancies. PACS 81.15.Cd; 81.40.Ef; 78.55.-m; 78.55.Et     

Pure UV photoluminescence from ZnO thin film by thermal retardation and using an amorphous SiO2 buffer layer

ZnO/SiO₂ thin films were fabricated on Si substrates by E-beam evaporation with thermal retardation. The as-prepared films were annealed for 2 h every 100 °C in the temperature range 400-800 °C under ambient air. The structural and optical properties were investigated by X-ray diffraction (XRD), atomic force microscopy (AFM) and photoluminescence (PL). The XRD analysis indicated that all ZnO thin films had a highly preferred orientation with the c-axis perpendicular to the substrate. From AFM images (AFM scan size is 1 μm×1 μm), the RMS roughnesses of the films were 3.82, 5.18, 3.65, 3.40 and 13.2 nm, respectively. PL measurements indicated that UV luminescence at only 374 nm was observed for all samples. The optical quality of the ZnO film was increased by thermal retardation and by using an amorphous SiO₂ buffer layer.     

Structural and optical properties of nanocrystalline ZnO thin films synthesized by the citrate precursor route

Nanocrystalline zinc oxide (ZnO) thin films have been deposited by spin-coating polymeric precursors synthesized by the citrate precursor route using ethylene glycol and citric acid as chelating agents. The ZnO thin films were annealed in air at different temperatures for 10 min. The films were characterized by different structural and optical techniques, including X-ray diffraction (XRD), atomic force microscopy (AFM), optical transmission spectroscopy, and photoluminescence (PL). The thermal decomposition of polymeric precursor was studied by thermogravimetric analysis (TGA). XRD analysis with grazing incidence and rocking curves indicate that the ZnO films are polycrystalline with preferential orientation along the c-axis direction with a full-width at half-maximum (FWHM) of 0.31° for 600 °C-annealed samples. On annealing, the texturing in films increased along with a decrease in FWHM. AFM micrographs illustrate that the ZnO films are crack-free with well-dispersed homogeneous and uniformly distributed spherical morphology. The synthesized ZnO thin films have transparency >85% in the visible region exhibiting band edge at 375 nm, which becomes sharper with anneal. Room temperature PL spectra of these films show strong ultraviolet (UV) emission around 392 nm with an increase in intensity with annealing temperature, attributed to grain growth. Deconvolution of the PL spectra reveals that there is coupling of free excitons with higher orders of longitudinal optical (LO) phonon replicas leading to a broad asymmetric near-band-edge peak.     

石英衬底上Au缓冲层对ZnO薄膜微结构的影响

采用单源化学气相沉积(SSCVD)法,在石英衬底上以Au为缓冲层,Zn4(OH)2(O2CCH3)6.2H2O为固相源制备ZnO薄膜。SEM和XRD测试ZnO薄膜的微结构,结果表明:相对于SiO2衬底上生长的ZnO薄膜,Au/SiO2衬底上生长的ZnO薄膜具有较好的结晶质量和表面平整度;对制备ZnO薄膜的衬底温度进行了工艺优化,结果表明:500℃时制备的ZnO薄膜颗粒大小均匀,结晶质量较好;通过荧光光谱仪对Au/SiO2衬底上的ZnO薄膜进行光致发光(PL)谱测试,ZnO薄膜在400nm出现紫光发射峰,而没有出现与缺陷相关的深能级发射峰,表明ZnO薄膜具有较好的结晶质量。     

Structural and optical properties of ZnO thin films on (111) CaF2 substrates grown by magnetron sputtering

ZnO thin films were grown on (111) CaF₂ substrates by magnetron sputtering at room temperature. Structural and optical properties of the ZnO thin films were studied. XRD analysis showed that the ZnO thin films had the (002) preferential orientation. The transmittance of ZnO thin films was over 80% in the visible range. The optical band gap of the ZnO thin films was 3.26 eV. The optical constants (n,k)$(n,k)$ of the ZnO thin films in the wavelength range 300–1000 nm were obtained by infrared spectroscopic ellipsometry measurement. PL spectra of ZnO thin films showed strong UV near-band-edge emission peak at 376.5 nm and weak visible red emission at 643.49 nm using He–Cd laser as the light source, using a synchrotron radiation light source PL spectra showed three emission peak at 320 nm, 410 nm and 542 nm respectively.     

Low-temperature MOVPE growth of ZnO thin films by using a buffer layer

ZnO thin films have been grown on a-plane (1,1,−2,0) sapphire substrates by metalorganic vapor phase epitaxy (MOVPE) at low substrate temperature of 350 °C. It is showed that the crystal and electrical quality of the thin films was improved by using a ZnO buffer layer. The photoluminescence (PL) measurements indicate that the ZnO thin films grown at such a low substrate temperature have a strong UV emission.     

Nanocrystalline ZnO film deposited by ultrasonic spray on textured silicon substrate as an anti-reflection coating layer

A ZnO thin film was successfully synthesized on glass, flat surface and textured silicon substrates by chemical spray deposition. The textured silicon substrate was carried out using two solutions (NaOH/IPA and Na₂CO₃). Textured with Na₂CO₃ solution, the sample surface exhibits uniform pyramids with an average height of 5 μm. The properties and morphology of ZnO films were investigated. X-ray diffraction (XRD) spectra revealed a preferred orientation of the ZnO nanocrystalline film along the c-axis where the low value of the tensile strain 0.26% was obtained. SEM images show that all films display a granular, polycrystalline morphology. The morphology of the ZnO layers depends dramatically on the substrate used and follows the contours of the pyramids on the substrate surface. The average reflectance of the textured surface was found to be around 13% and it decreases dramatically to 2.57% after deposition of a ZnO antireflection coating. FT-IR peaks arising from the bonding between Zn–O are clearly represented using a silicon textured surface. A very intense photoluminescence (PL) emission peak is observed for ZnO/textured Si, revealing the good quality of the layer. The PL peak at 380.5 nm (UV emission) and the high-intensity PL peak at 427.5 nm are observed and a high luminescence occurs when using a textured Si substrate.     

ZnO-Si不同退火条件对生长ZnSe薄膜的影响

研究了作为缓冲层的ZnO薄膜在不同的退火时间、退火温度下退火对Si衬底上生长ZnSe膜质量的影响。当溅射有ZnO膜的Si(111)衬底的退火条件变化时，从X射线衍射谱（XRD）和光致发光谱（PL）中可见，ZnSe(111)膜的晶体质量有较大的变化。变温的PL谱表明，Si衬底上生长的具有ZnO缓冲层的ZnSe膜的近带边发射峰起源于自由激子发射。     

Preparation and characterization of Mg-doped ZnO thin films by sol-gel method

Undoped and Mg-doped ZnO thin films were deposited on Si(1 0 0) and quartz substrates by the sol-gel method. The thin films were annealed at 873 K for 60 min. Microstructure, surface topography and optical properties of the thin films have been measured by X-ray diffraction (XRD), atomic force microscope (AFM), UV-vis spectrophotometer, and fluorophotometer (FL), respectively. The XRD results show that the polycrystalline with hexagonal wurtzite structure are observed for the ZnO thin film with Mg:Zn = 0.0, 0.02, and 0.04, while a secondary phase of MgO is evolved for the thin film with Mg:Zn = 0.08. The ZnO:Mg-2% thin film exhibits high c-axis preferred orientation. AFM studies reveal that rms roughness of the thin films changes from 7.89 nm to 16.9 nm with increasing Mg concentrations. PL spectra show that the UV-violet emission band around 386-402 nm and the blue emission peak about 460 nm are observed. The optical band gap calculated from absorption spectra and the resistivity of the ZnO thin films increase with increasing Mg concentration. In addition, the effects of Mg concentrations on microstructure, surface topography, PL spectra and electrical properties are discussed.