Structure, room-temperature magnetic and optical properties of Mn-doped TiO2 nano powders prepared by the sol-gel process

TiO 2 nano powders with Mn concentration of 0 at%-12 at% were synthesized by the sol-gel process,and were annealed at 500 C and 800 C in air for 2 hrs.X-ray diffraction (XRD) measurements indicate that the Mn-TiO 2 nano powders with Mn concentration of 1 at% and 2 at% annealed at 500 and 800 C are of pure anatase and rutile,respectively.The scanning electron microscope (SEM) observations reveal that the crystal grain size increases with the annealing temperature,and the high resolution transmission electron microscopy (HRTEM) investigations further indicate that the samples are well crystallized,confirming that Mn has doped into the TiO 2 crystal lattice effectively.The room temperature ferromagnetism,which could be explained within the scope of the bound magnetic polaron (BMP) theory,is detected in the Mn-TiO 2 samples with Mn concentration of 2 at%,and the magnetization of the powders annealed at 500 C is stronger than that of the sample treated at 800 C.The UV-VIS diffuse reflectance spectra results demonstrate that the absorption of the TiO 2 powders could be enlarged by the enhanced trapped electron absorption caused by Mn doping.     

Deterministic Secure Quantum Communication with Cluster State and Bell-Basis Measurements

We present a novel protocol for deterministic secure quantum communication by using the lour-qubit cluster state as quantum channel. It is shown that two legitimate users can directly transmit the secret messages based on Bellbasis measurements and classical communication. The present protocol makes use of the ideas of block transmission and decoy particle checking technique. It has a high capacity as each cluster state can carry two 5its of information, and has a high intrinsic efficieney 5ecause almost all the instances except the decoy checking particles （its numSer is negligible） are useful. Furthermore, this protocol is feasible with present-day technique.     

Block basis property of a class of 2×2 operator matrices and its application to elasticity

A necessary and sufficient condition is obtained for the generalized eigenfunction systems of 2 × 2 operator matrices to be a block Schauder basis of some Hilbert space, which offers a mathematical foundation of solving symplectic elasticity problems by using the method of separation of variables. Moreover, the theoretical result is applied to two plane elasticity problems via the separable Hamiltonian systems.     

Integrals of Vertex Operators and uantum Shuffles

Given a braided vector space , we show that iterated integrals of operator-valued functions satisfying a certain exchange relation give rise to representations of the quantum shuffle algebra built on . Using the quantum shuffle construction of the 'upper triangular part' of a quantum shuffle, this provides a simple proof of the result of Bouwknegt, MacCarthy and Pilch saying that integrals of vertex operators acting on certain Fock modules give rise to representations of .     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.     

Study on the pre-chopper in CSNS LEBT

Physical designing of the pre-chopper in CSNS LEBT is carried out, which includes the deflecting voltage, the length and the width of the deflecting plates, and the gap between the deflecting plates. The most outstanding feature of the design is that both the gap and the width vary with the beam envelope size. So both the requried deflecting voltage and the loaded capacitance are lowered. In order to avoid destruction of the space charge neutralization by the pre-chopper in the whole LEBT, an electron-trapping electrode is arranged to confine the electrostatic field of the pre-chopper to the local area. To examine the reliability of the pre-chopping design in CSNS LEBT, a similar pre-chopping design in ADS RFQ LEBT is set up and an experiment on the pre-chopper is prepared. 3-dimensional simulations are carried out to determine the loaded capacitance and the applied voltage of the electron-trapping electrode.     

Synchronization in a Mutualism Ecosystem Induced by Noise Correlation

Understanding the cause of the synchronization of population evolution is an important issue for ecological improvement. Here we present a Lotka-Volterra-type model driven by two correlated environmental noises and show, via theoretical analysis and direct simulation, that noise correlation can induce a synchronization of the mutualists. The time series of mutual species exhibit a chaotic-like fluctuation, which is independent of the noise correlation, however, the chaotic fluctuation of mutual species ratio decreases with the noise correlation. A quantitative parameter defined for characterizing chaotic fluctuation provides a good approach to measure when the complete synchronization happens.     

Metric of States

Metric of quantum states plays an important role in quantum information theory. In this letter, we find the deep connection between quantum logic theory and quantum information theory. Using the method of quantum logic, we can get a famous inequality in quantum information theory, and we answer a question raised by S. Gudder.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

Calibration of RPC-based muon detector at BESⅢ

The calibration algorithm for RPC-based muon detector at BESIII has been developed. The calibration method, calibration error and algorithm performance are studied. The primary results of efficiency and noise at layer, module and strip levels have been calibrated with cosmic ray data. The calibration constants are available for simulation and reconstruction tuning. The results of Monte Carlo and data are also compared to check the validation and reliability of the algorithm.     

D^0D^0 mixing and other recent charm results from BABAR

Studies in which BABAR data have shown evidence for mixing in the neutral charm meson system are presented. A new measurement of the lifetime difference parameter ycp = （1.16±0.22±0.18）% is described. Results are also presented from a systematic study of DK and D＊K invariant mass distributions from a 470 fb^-1 sample of asymmetric e^＋e^- interactions recorded by the BABAR detector at the PEP-Ⅱ storage rings. A new charmed-strange meson has been observed with mass [3044 ± 8stat （-5^＋30 ）syst] MeV/c^2 and width [239± 35stat （-42^＋46）syst]MeV/c^2.     

Coordinated Control of Multi-Agent Systems with a Varying-Velocity Leader and Input Saturation

In this paper, we investigate a leader-following tracking problem for multi-agent systems with bounded inputs. We propose a distributed bounded protocol for each follower to track a leader whose states may not be completely measured. We theoretically prove that each agent can follow the leader with estimable track errors. Finally, some numerical simulations are presented to illustrate our theoretical results.     

Pattern recognition and data mining software based on artificial neural networks applied to proton transfer in aqueous environments

In computational physics proton transfer phenomena could be viewed as pattern classification problems based on a set of input features allowing classification of the proton motion into two categories： transfer ＇occurred＇ and transfer ＇not occurred＇. The goal of this paper is to evaluate the use of artificial neural networks in the classification of proton transfer events, based on the feed-forward back propagation neural network, used as a classifier to distinguish between the two transfer cases. In this paper, we use a new developed data mining and pattern recognition tool for automating, controlling, and drawing charts of the output data of an Empirical Valence Bond existing code. The study analyzes the need for pattern recognition in aqueous proton transfer processes and how the learning approach in error back propagation （multilayer perceptron algorithms） could be satisfactorily employed in the present case. We present a tool for pattern recognition and validate the code including a real physical case study. The results of applying the artificial neural networks methodology to crowd patterns based upon selected physical properties （e.g., temperature, density） show the abilities of the network to learn proton transfer patterns corresponding to properties of the aqueous environments, which is in turn proved to be fully compatible with previous proton transfer studies.     

A geometric factor calculation method based on the isotropic flux assumption

One of the instruments onboard the China Seismic Electromagnetic Satellite （CSES） is the Low Energy Particle Detector （LEPD）. The primary objective of LEPD is to provide measurements of the fluxes, energy spectra and pitch angles of 100 keV to 10 MeV electrons and protons from 2 to 50 MeV in the Earth＇s magnetosphere. The geometric factor is one of the principle parameters of a detector, which converts the physical quantity-count rate to the particle quantity-flux. In this paper, we calculated the geometric factor of LEPD via computer modeling of an isotropic radiation environment. It was first demonstrated that the radiation intensity related should obey a cosine-law, then a general sampling method of generating this distribution via GPS of GEANT4 was explained. Furthermore, combined with flux normalization, a comparison of the geometric factor calculation of a set of 2-layer detectors with different shapes （cylinder, truncated cone and rectangle） was performed. Results show a generally good agreement between simulation and analytical calculations for the cylinder and truncated cone detectors, and the result of the rectangular one, for which there is no accurate analytical formula, is consistent with the previous simulated results by others. As a practical instance of the 2-layer rectangle detector, the geometric factor of LEPD is 10.336±0.036 m cm2·sr for 10 MeV proton and 8.211±0.032 m cm2·sr for 8 MeV electron.     

Status of KLOE-2

In a few months the KLOE-2 detector is expected to start data taking at the upgraded DAФNE φ-factory of INFN Laboratori Nazionali di Frascati. It aims to collect 25 fb^-1 at the φ（1020） peak, and about 5 fb^-1 in the energy region between 1 and 2.5 GeV. We review the status and physics program of the project.     

On Camassa-Holm Equation with Self-Consistent Sources and Its Solutions

Regarded as the integrable generalization of Camassa-Holm （CH） equation, the CH equation with self-consistent sources （CHESCS） is derived. The Lax representation of the CHESCS is presented. The conservation laws for CHESCS are constructed. The peakon solution, N-soliton, N-cuspon, N-positon, and N-negaton solutions of CHESCS are obtained by using Darboux transformation and the method of variation of constants.