双空位缺陷石墨纳米带的电子结构和输运性质研究

基于第一原理电子结构和输运性质计算,研究了585双空位拓扑缺陷对锯齿（zigzag）型石墨纳米带（具有椅型（armchair）边）电子结构和输运性质的影响.研究发现,585双空位缺陷的存在使得锯齿型石墨纳米带的能隙增大,并在能隙中出现了一条局域于缺陷处的缺陷态能带,双空位缺陷的取向也影响其能带结构.另外,585双空位缺陷对能隙较小的锯齿型石墨纳米带输运性质的影响较大,而对能隙较大的锯齿型石墨纳米带影响很小,缺陷取向并不显著影响纳米带的输运性质. 关键词： 石墨纳米带 585空位缺陷 电子结构 输运性质     

Zigzag型石墨纳米带电子结构和输运性质的第一性原理研究

采用第一性原理电子结构和输运性质计算研究了zigzag型单层石墨纳米带(具有armchair 边缘)的电子结构和输运性质及其边缘空位缺陷效应. 研究发现,完整边缘的zigzag型石墨纳米带是具有一定能隙的半导体带,边缘空位缺陷的存在使得纳米带能隙变小,且缺陷浓度越大,能隙越小,并发生了半导体-金属转变. 利用这些研究结果,将有助于在能带工程中实现其电子结构裁剪. 关键词： 石墨纳米带 空位缺陷 电子结构 输运性质     

TiO_2缺陷结构电子性质的第一性原理计算

本文采用第一性原理研究了O空位缺陷、Ti空位缺陷TiO_2的能带结构、总态密度、吸收谱.通过研究发现:与TiO_2超胞结构的能带相比,O空位缺陷体系的价带与导带能量均向低能区域移动,费米能级与导带底交错,呈现出n型半导体,Ti空位缺陷的TiO_2的费米能级与价带顶部的能级交错,为p型半导体材料.对于O空位缺陷TiO_2总态密度与分波态密度在低能区的态密度则主要由O的3s、3p轨道贡献的能量,而在费米能附近的态密度则主要由Ti的4d轨道贡献能量;Ti空位缺陷的态密度总态密度仍然由O的3s、3p和Ti的4d轨道贡献的能量;同时分析吸收光谱发现峰值下移较多的是钛缺陷体系,其原因在于Ti缺陷结构中未成键电子的相互作用.     

Zigzag型石墨纳米带电子结构和输运性质的第一性原理研究

采用第一性原理电子结构和输运性质计算研究了zigzag型单层石墨纳米带(具有armchair 边缘)的电子结构和输运性质及其边缘空位缺陷效应. 研究发现，完整边缘的zigzag型石墨纳米带是具有一定能隙的半导体带，边缘空位缺陷的存在使得纳米带能隙变小，且缺陷浓度越大，能隙越小，并发生了半导体-金属转变. 利用这些研究结果，将有助于在能带工程中实现其电子结构裁剪.     

单空位缺陷对石墨纳米带电子结构和输运性质的影响

基于第一性原理电子结构和输运性质计算,研究了单空位缺陷对单层石墨纳米带(包括zigzag型和armchair型带)电子性质的影响.研究发现,单空位缺陷使石墨纳米带在费米面上出现一平直的缺陷态能带;单空位缺陷的引入使zigzag型半导体性的石墨纳米带变为金属性,这在能带工程中有重要的应用价值;奇数宽度的armchair型石墨纳米带表现出金属特性,有着很好的导电性能,同时,偶数宽度的armchair型石墨带虽有金属性的能带结构,但却有类似半导体的伏安特性;单空位缺陷使得奇数宽度的armchair石墨纳米带导电 关键词： 石墨纳米带 单空位缺陷 电子结构 输运性质     

点缺陷对单层MoS_2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层Mo S2电子结构、能带结构、态密度和光学性质进行计算.计算结果表明:单层Mo S2属于直接带隙半导体,禁带宽度为1.749e V,Mo空位缺陷V-Mo的存在使得单层Mo S2转化为间接带隙Eg=0.660e V的p型半导体,S空位缺陷V-S使得Mo S2带隙变窄为Eg=0.985e V半导体,S原子替换Mo原子S-Mo反位缺陷的存在使得Mo S2转化为带隙Eg=0.374e V半导体;Mo原子替换S原子Mo-S反位缺陷形成Eg=0.118e V直接带隙半导体.费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献.光学性质计算表明:空位缺陷对Mo S2的光学性质影响最为显著,可以增大Mo S2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失.     

B掺杂锐钛矿型(101)面的电子结构和光学性质研究

采用平面波超软赝势方法计算了B掺杂锐钛矿型TiO2(101)面的几何结构、缺陷形成能、电子结构和光学性质.分析B掺杂后的几何结构,发现氧化气氛下B易于掺杂间隙1处,还原气氛下易于替位掺杂O3C2.计算了掺杂前后的氧空位VO形成能和替位形成能,得出B掺杂和氧空位相互促进的结论.B掺杂在导带底引入了杂质能级,B的2p态和Ti的3d态发生强烈关联而使带隙变窄,发生红移现象.O空位也使带隙变窄,但未发现红移现象.B掺杂和O空位同时存在则使吸收光谱扩展至整个可见光区.     

B掺杂锐钛矿型(101)面的电子结构和光学性质研究

采用平面波超软赝势方法计算了B掺杂锐钛矿型TiO2(101)面的几何结构、缺陷形成能、电子结构和光学性质.分析B掺杂后的几何结构,发现氧化气氛下B易于掺杂间隙1处,还原气氛下易于替位掺杂O3C2.计算了掺杂前后的氧空位VO形成能和替位形成能,得出B掺杂和氧空位相互促进的结论.B掺杂在导带底引入了杂质能级,B的2p态和Ti的3d态发生强烈关联而使带隙变窄,发生红移现象.O空位也使带隙变窄,但未发现红移现象.B掺杂和O空位同时存在则使吸收光谱扩展至整个可见光区.     

TiO2纳米管的力学和电子学性质

基于密度泛函理论研究了纤铁矿和锐钛矿型TiO₂纳米管的原子结构、稳定性、Young模量以及电子能带结构.计算结果显示：在纳米管直径较小时,锐钛矿型TiO₂纳米管的稳定性要好于纤铁矿型纳米管,随着管径的增大,纤铁矿型纳米管变得比锐钛矿型纳米管要更稳定.纤铁矿型TiO₂纳米管具有比锐钛矿型纳米管更大的Young模量,力学性能比较优异.另外,通过对电子能带结构的研究发现,手性对TiO₂纳米管的电子结构影响较大,纤铁矿（0,n）型和锐钛矿（n,0）型纳米管为间接带隙半导体,而纤铁矿（n,0）型和锐钛矿（0,n）型纳米管却具有直接带隙. 关键词： 2纳米管')" href="#">TiO₂纳米管 Young模量 间接带隙 直接带隙     

点缺陷对单层MoS2电子结构及光学性质的影响研究

采用基于第一性原理的贋势平面波方法,对不同类型点缺陷单层MoS2电子结构、能带结构、态密度和光学性质进行计算。计算结果表明：单层MoS2属于直接带隙半导体,禁带宽度为1.749ev,V-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.671eV的p型半导体,V-S缺陷MoS2的带隙变窄为Eg=0.974eV,S-Mo缺陷的存在使得MoS2转化为间接带隙Eg=0.482eV; Mo-S缺陷形成Eg=0.969eV直接带隙半导体,费米能级上移靠近价带。 费米能级附近的电子态密度主要由Mo的4d态和s的3p态电子贡献。光学性质计算表明：空位缺陷对MoS2的光学性质影响最为显著,可以增大MoS2的静态介电常数、折射率n0和反射率,降低吸收系数和能量损失。     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Characterization of PolyA and PolyC mismatches by Raman spectroscopy

A.C mismatches are studied by Raman spectral characterization of PolyA, PolyC, and their equimolar complex in solution of 0.14 mol/L Na ,pH7.0.Experimental results show that A·C mismatches occur to be A/B (mainly A) conformers, and unlike Watson-Crick base pairing, this kind of mismatches is stabilized by only one hydrogen bond involving cytosine N4H2 and adenine N7.The formation of A·C complex makes the base stacking interactions much stronger, and conformation of the backbone more ordered, which leads to obvious Raman hypochromic effect with some shifts in corresponding bands.     

Improvement of four-wave mixing-based wavelength conversion efficiency in dispersion shifted fiber by 40-GHz clock pumping

40-GHz clock modulated signal as a pump to improve the efficiency of four-wave mixing (FWM)-based wavelength conversion in a 26.5-km dispersion shifted fiber (DSF) is investigated. The experimental results demonstrate that the conjugated FWM component has higher intensity with the clock pumping than that with the continuous-wave (CW) light pumping. The improvement of FWM-based wavelength conversion efficiency is negligible when the pump power is less than Brillouin threshold. But when the pump power is greater than Brillouin threshold, the improvement becomes significant and increases with the increment of pump power. The improvement can increase up to 9 dB if pump power reaches 17 dBm.     

Multi-pulse operation of a Kerr-lens mode-locked femtosecond laser

Our experimental results show that the presence of a proper amount of negative group velocity dispersion is essential to multi-pulse operation of a Kerr-lens mode-locked femtosecond laser. We demonstrate that the pulse separations and the number of pulses contained within a cavity round trip are strongly dependent on the initial perturbations. The results allow us to get a better understanding on the influences of the convoluted self-phase modulation and intra-cavity dispersions on the stable multi-pulse oscillation in a Kerr-lens mode-locked femtosecond laser.     

Propagation of Helmholtz-Gauss beams in weak turbulent atmosphere

Based on the Rytov approximation of light propagation in weak turbulent atmosphere,the closed-form expressions of field and average irradiance of each one of the four fundamental families of Helmholtz-Gauss (HzG)beams:cosine-Gauss beams,stationary Mathieu-Gauss beams,stationary parabolic-Gauss beams,and Bessel-Gauss beams,which are propagating in weak turbulent atmosphere,are obtained.The results show that the field and average irradiance can be written as the product of four factors:complex amplitude depending on the z-coordinate only,a Ganssian beam.a factor of complex phase perturbation induced by atmospheric turbulence,and a complex scaled version of the transverse shape of the non-diffracting beam.The effect of weak atmospheric turbulence on irradiance distribution of the HzG beam can be ignored.     

An effective method for reducing speckle noise in digital holography

An effective method for reducing the speckle noise in digital holography is proposed in this paper.Different from the methods based on classical filtering technique,it utilizes the multiple holograms which are generated by rotating the illuminating light continuously.The intensity images reconstructed by a series of holograms generated by rotating the illuminating light possess different speckle patterns.Hence by properly averaging the reconstructed intensity fields,the speckle noises can be reduced greatly.Experimental results show that the proposed method is simple and effective to reduce speckle noise in digital holography.     

Influence of purity of HfO2 on reflectance of ultraviolet multilayer

The impurities in two kinds of HfO2 materials and in their corresponding single layer thin films were determined through glow discharge mass spectrum technology and secondary ion mass spectrometry(SIMS) equipment respectively.It was found that ZrO2 was the main impurity in the two kinds of HfO2 either in the original HfO2 materials or in the electron beam deposited films.In addition,the difference of Zr content in the two kinds of HfO2 single laver films was much laxger than that of the other impurities such as Ti and Fe.which showed that it was just ZrO2 that made the difference between the optical performance of the film products including the two kinds of HfO2.With these two kinds of HfO2 and the same kind of SiO2.we deposited HfO2/SiO2 multilayer reflective coatings at the wavelength of 266 nm.Experimental results showed that the reflectances of these two mirrors were about 99.85% and 99.15% respectively,which agreed well with the designed results what were based on the optical constants obtained from the corresponding single layer thin films.     

Speech enhancement by array crosstalk resistant ANC and spectrum subtraction

Microphone array-based speech enhancement has great importance for speech communications and speech recognition. To reduce the aperture of the microphone array and to increase the effect of the speech enhancement will greatly broaden the application areas of the microphone array. An array crosstalk resistant adaptive noise cancellation method is therefore presented. And then an improved spectral subtraction algorithm is further cascaded to obtain better enhancement results. Theoretic analysis and experiments indicate that the proposed scheme needs only a very small microphone array while it simultaneously achieves a higher SNR improvement. Besides, the proposed scheme can be used in many noisy environments and is easy for real-time implementation.