Fast-speed self-powered PEDOT: PSS/α-Ga2O3 nanorod array/FTO photodetector with solar-blind UV/visible dual-band photodetection

The $\alpha $-Ga$_{2}$O$_{3}$ nanorod array is grown on FTO by hydrothermal and annealing processes. And a self-powered PEDOT:PSS/$\alpha $-Ga$_{2}$O$_{3}$ nanorod array/FTO (PGF) photodetector has been demonstrated by spin coating PEDOT:PSS on the $\alpha $-Ga$_{2}$O$_{3}$ nanorod array. Successfully, the PGF photodetector shows solar-blind UV/visible dual-band photodetection. Our device possesses comparable solar-blind UV responsivity (0.18 mA/W at 235 nm) and much faster response speed (0.102 s) than most of the reported self-powered $\alpha $-Ga$_{2}$O$_{3}$ nanorod array solar-blind UV photodetectors. And it presents the featured and distinguished visible band photoresponse with a response speed of 0.136 s at 540 nm. The response time is also much faster than the other non-self-powered $\beta $-Ga$_{2}$O$_{3 }$ DUV/visible dual-band photodetectors due to the fast-speed separation of photogenerated carries by the built-in electric field in the depletion regions of PEDOT:PSS/$\alpha $-Ga$_{2}$O$_{3}$ heterojunction. The results herein may prove a promising way to realize fast-speed self-powered $\alpha $-Ga$_{2}$O$_{3}$ photodetectors with solar-blind UV/visible dual-band photodetection by simple processes for the applications of multiple-target tracking, imaging, machine vision and communication.     

Enhanced interface properties of diamond MOSFETs with Al_2O_3 gate dielectric deposited via ALD at a high temperature

The interface state of hydrogen-terminated(C–H) diamond metal–oxide–semiconductor field-effect transistor(MOSFET) is critical for device performance. In this paper, we investigate the fixed charges and interface trap states in C–H diamond MOSFETs by using different gate dielectric processes. The devices use Al_2O_3 as gate dielectrics that are deposited via atomic layer deposition(ALD) at 80℃ and 300℃, respectively, and their C–V and I–V characteristics are comparatively investigated. Mott–Schottky plots(1/C~2–VG) suggest that positive and negative fixed charges with low density of about 1011 cm~(-2) are located in the 80-℃-and 300-℃ deposition Al_2O_3 films, respectively. The analyses of direct current(DC)/pulsed I–V and frequency-dependent conductance show that the shallow interface traps(0.46 e V–0.52 e V and0.53 e V–0.56 e V above the valence band of diamond for the 80-℃ and 300-℃ deposition conditions, respectively) with distinct density(7.8 × 10~(13) e V~(-1)·cm~(-2)–8.5 × 10~(13) e V-1·cm~(-2) and 2.2 × 1013 e V~(-1)·cm~(-2)–5.1 × 10~(13) e V~(-1)·cm~(-2) for the80-℃-and 300-℃-deposition conditions, respectively) are present at the Al_2O_3/C–H diamond interface. Dynamic pulsed I–V and capacitance dispersion results indicate that the ALD Al_2O_3 technique with 300-℃ deposition temperature has higher stability for C–H diamond MOSFETs.     

Spin polarization effect for molecule Ta2

Density functional theory （DFT） （B3p86） has been used to optimize the structure of the molecule Ta2. The result shows that the ground state of molecule Ta2 is a 7-multiple state and its electronic configuration is ^7∑u^＋, which shows the spin polarization effect for molecule Ta2 of transition metal elements for the first time. Meanwhile, spin pollution has not been found because the wavefunction of the ground state does not mix with those of higher states. So, the fact that the ground state of molecule Ta2 is a 7-multiple state indicates a spin polarization effect of molecule Ta2 of the transition metal elements, i.e. there exist 6 parallel spin electrons and the non-conjugated electrons are greatest in number. These electrons occupy different space orbitals so that the energy of molecule Ta2 is minimized. It can be concluded that the effect of parallel spin of the molecule Ta2 is larger than the effect of the conjugated molecule, which is obviously related to the effect of d-electron delocalization. In addition, the Murrell-Sorbie potential functions with parameters for the ground state ^7∑u^＋ and other states of the molecule Ta2 are derived. The dissociation energy De, equilibrium bond length Re and vibration frequency we for the ground state of molecule Ta2 are 4.5513eV, 0.2433nm and 173.06cm^-1, respectively. Its force constants f2, f3 and f4 are 1.5965×10^2aJ.nm^-2, -6.4722×10^3aJ·nm^-3 and 29.4851×10^4aJ·nm^-4, respectively. Other spectroscopic data we xe, Be and αe for the ground state of Ta2 are 0.2078cm^-1, 0.0315 cm^-1 and 0.7858×10^-4 cm^-1, respectively.     

Synthesis and characterization of Ca2Sn1-xCexO4 with blue luminescence originating from Ce^4＋ charge transfer transition

Ce^4＋-doped Ca2SnO4 with a one-dimensional structure, which emits bright blue light, is prepared by using a solid-state reaction method. The x-ray diffraction results show that the Ce^4＋ ions doped in Ca2SnO4 occupy the Sn^4＋ sites. The excitation and emission spectra of Ca2Sn1-xCexO4 appear to have broad bands with peaks at - 268nm and -442nm, respectively. A long excited-state lifetime （-83μs） for the emission from Ca2Sn1-xCexO4 suggests that the luminescence originates from a ligand-to-metal Ce^4＋ charge transfer （CT）. The luminescent properties of Ca2Snl_xCexO4 have been compared with those of Sr2CeO4, which is the only material reported so far to show Ce^4＋ CT luminescence. More interestingly, it is observed that the emission intensity of Ca2Sn1-xCexO4 with a small doping concentration （x - 0.03） is comparable to that of Sr2CeO4 in which the concentration of active centre is 100%.     

Effect of lithium-potassium mixed alkali on spectroscopic properties of Er^3＋-doped aluminophosphate glasses

Er^3＋-doped lithium-potassium mixed alkali aluminophosphate glasses belonging to the oxide system xK2O-（15-x）Li2O-4B2O3-11Al2O3-5BaO-65P2O5 are obtained in a semi-continuous melting quenching process. Spectroscopic properties of Er^3＋-doped glass matrix have been analysed by fitting the experimental data with the standard Judd-Ofelt theory. It is observed that Judd-Ofelt intensity parameters Ωt（t = 2, 4 and 6） of Er^3＋ change when the second alkali is introduced into glass matrix. The variation of line strength Sed[^4I13/2,^4I15/2] follows the same trend as that of the/26 parameter. The effect of mixed alkali on the spectroscopic properties of the aluminophosphate glasses, such as absorption cross-section, stimulated emission cross-section, spontaneous emission probability, branching ratio and the radiative lifetime, has also been investigated in this paper.     

Dy2 AlFe13 Mn3 化合物的本征磁致伸缩

通过X-射线衍射及磁测量手段研究了Dy2AlFe13Mn3化合物的结构及磁性质。研究结果表明Dy2AlFe13Mn3化合物具有六角相的Th2Ni17型结构。通过X-射线热膨胀测定法发现Dy2AlFe13Mn3化合物在245到344K的温度范围内存在负热膨胀现象，其平均热膨胀系数为α＝-1.1×10-4K-1K-1。在105到360K的温度范围内，通过比较磁性状态下的晶胞参数和由高温顺磁状态外延得到的低温顺磁状态下的晶胞参数间的差别计算了Dy2AlFe13Mn3化合物的本征磁致伸缩。结果表明Dy2AlFe13Mn3化合物的本征体磁致伸缩ωS在105到245K的温度范围内随着温度的升高而增大，由105K时的7.0×10-3 增加到245K时的9.1×10-3。随着温度的进一步升高，ωS反而减小。沿c轴方向的本征线磁致伸缩λc随着温度的升高而减小。基面内的本征线磁致伸缩λa在105到270K的温度范围内随着温度的升高而增大，从105K时的0.8×10-3增大到270K时的3.4×10-3，然后随着温度的进一步升高而减小。     

Spin polarization effect for Os2 molecule

Density functional Theory （DFT） （B3p86） of Gaussian03 has been used to optimize the structure of Os2 molecule. The result shows that the ground state for Os2 molecule is 9-multiple state and its electronic configuration is ^9∑^＋g, which shows spin polarization effect of Os2 molecule of transition metal elements for the first time. Meanwhile, we have not found any spin pollution because the wavefunction of the ground state does not mingle with wavefunctions with higher energy states. So, the fact that the ground state for Os2 molecule is a 9-multiple state is indicative of spin polarization effect of Os2 molecule of transition metal elements. That is, there exist 8 parallel spin electrons. The non-conjugated electron is greatest in number. These electrons occupy different spacious tracks, so that the energy of Os2 molecule is minimized. It can be concluded that the effect of parallel spin of Os2 molecule is larger than the effect of the conjugated molecule, which is obviously related to the effect of electron d delocalization. In addition, the Murrell-Sorbie potential functions with the parameters for the ground state ^9∑^＋g and other states of Os2 molecule are derived. Dissociation energy De for the ground state of Os2 molecule is 3.3971eV, equilibrium bond length Re is 0.2403nm, vibration frequency ωe is 235.32cm^-1. Its force constants f2, f3, and f4 are 3.1032×10^2aJ·nm^-2, -14.3425×10^3aJ·nm^-3 and 50.5792×10^4aJ·nm^-4 respectively. The other spectroscopic data for the ground state of Os2 molecule ωexe, Be and ae are 0.4277cm^- 1, 0.0307cm^- 1 and 0.6491 × 10^-4cm^-1 respectively.     

Enhancement of magnetic and dielectric properties of low temperature sintered NiCuZn ferrite by Bi2O3-CuO additives

With a series of 1.0 wt%Bi$_{2}$O$_{3}$-$x$ wt% CuO ($x =0.0$, 0.2, 0.4, 0.6, and 0.8) serving as sintering additives, Ni$_{0.23}$Cu$_{0.32}$Zn$_{0.45}$Fe$_{2}$O$_{4}$ ferrites are successfully synthesized at a low temperature (900 $^\circ$C) by using the solid state reaction method. The effects of the additives on the phase formation, magnetic and dielectric properties as well as the structural and gyromagnetic properties are investigated. The x-ray diffraction (XRD) results indicate that the added Bi$_{2}$O$_{3}$-CuO can lower the synthesis temperature significantly without the appearing of the second phase. The scanning electron microscope (SEM) images confirm that Bi$_{2}$O$_{3}$ is an important factor that determines the sintering behaviors, while CuO affects the grain size and densification. With CuO content $x=0.4$ or 0.6, the sample shows high saturation magnetization, low coercivity, high real part of magnetic permeability, dielectric permittivity, and small ferromagnetic resonance linewidth ($\Delta H$). The NiCuZn ferrites are a promising new generation of high-performance microwave devices, such as phase shifters and isolators.     

Judd--Ofelt analysis of spectra and experimental evaluation of laser performance of Tm3+ doped Lu2SiO5 crystal

This paper reports that the Tm^3＋：Lu2SiO5 （Tm：LSO） crystal is grown by Czochralski technique. The roomtemperature absorption spectra of Tm：LSO crystal are measured on a b-cut sample with 4 at.% thulium. According to the obtained Judd-Ofelt intensity parameters Ω2=9.3155×10^-20 cm^2, Ω4=8.4103×10^-20 cm^2, Ω6=1.5908×10^-20 cm^2, the fluorescence lifetime is calculated to be 2.03 ms for ^3F4 → ^3H6 transition, and the integrated emission cross section is 5.81×10^-18 cm^2. Room-temperature laser action near 2μm under diode pumping is experimentally evaluated in Tm：LSO. An optical-optical conversion efficiency of 9.1% and a slope efficiency of 16.2% are obtained with continuouswave maximum output power of 0.67 W. The emission wavelengths of Tm：LSO laser are centred around 2.06μm with spectral bandwidth of -13.6 nm.     

Steady-state and transient electronic transport properties of β-(AlxGa1-x)2O3/Ga2O3 heterostructures: An ensemble Monte Carlo simulation

The steady-state and transient electron transport properties of $\beta $-(Al$_{x}$Ga$_{1-x}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructures were investigated by Monte Carlo simulation with the classic three-valley model. In particular, the electronic band structures were acquired by first-principles calculations, which could provide precise parameters for calculating the transport properties of the two-dimensional electron gas (2DEG), and the quantization effect was considered in the $\varGamma $ valley with the five lowest subbands. Wave functions and energy eigenvalues were obtained by iteration of the Schrödinger-Poisson equations to calculate the 2DEG scattering rates with five main scattering mechanisms considered. The simulated low-field electron mobilities agree well with the experimental results, thus confirming the effectiveness of our models. The results show that the room temperature electron mobility of the $\beta $-(Al$_{0.188}$Ga$_{0.812}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructure at 10 kV$ \cdot$cm$^{-1}$ is approximately 153.669 cm$^{2}\cdot$V$^{-1}\cdot$s$^{-1}$, and polar optical phonon scattering would have a significant impact on the mobility properties at this time. The region of negative differential mobility, overshoot of the transient electron velocity and negative diffusion coefficients are also observed when the electric field increases to the corresponding threshold value or even exceeds it. This work offers significant parameters for the $\beta$-(Al$_{x}$Ga$_{1-x}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructure that may benefit the design of high-performance $\beta$-(Al$_{x}$Ga$_{1-x}$)$_{2}$O$_{3}$/Ga$_{2}$O$_{3}$ heterostructure-based devices.     

Effect of carbon nanotubes addition on thermoelectric properties of Ca3Co4O9 ceramics

Increasing the phonon scattering center by adding nanoparticles to thermoelectric materials is an effective method of regulating the thermal conductivity. In this study, a series of Ca$_{3}$Co$_{4}$O$_{9}/x$ wt.% CNTs ($x=0$, 3, 5, 7, 10) polycrystalline ceramic thermoelectric materials by adding carbon nanotubes (CNTs) were prepared with sol-gel method and cold-pressing sintering technology. The results of x-ray diffraction and field emission scanning electron microscopy show that the materials have a single-phase structure with high orientation and sheet like microstructure. The effect of adding carbon nanotubes to the thermoelectric properties of Ca$_{3}$Co$_{4}$O$_{9}$ was systematically measured. The test results of thermoelectric properties show that the addition of carbon nanotubes reduces the electrical conductivity and Seebeck coefficient of the material. Nevertheless, the thermal conductivity of the samples with carbon nanotubes addition is lower than that of the samples without carbon nanotubes. At 625 K, the thermal conductivity of Ca$_{3}$Co$_{4}$O$_{9}$/10 wt.% CNTs sample is reduced to 0.408 W$\cdot$m$^{-1}\cdot$K$^{-1}$, which is about 73% lower than that of the original sample. When the three parameters are coupled, the figure of merit of Ca$_{3}$Co$_{4}$O$_{9}$/3 wt.% CNTs sample reaches 0.052, which is 29% higher than that of the original sample. This shows that an appropriate amount of carbon nanotubes addition can reduce the thermal conductivity of Ca$_{3}$Co$_{4}$O$_{9}$ ceramic samples and improve their thermoelectric properties.     

Laboratory demonstration of geopotential measurement using transportable optical clocks

We report an experimental demonstration of geopotential difference measurement using a pair of transportable $^{40}$Ca$^{+}$ optical clocks (TOC-729-1 and TOC-729-3) in the laboratory, each of them has an uncertainty of $1.3 \times 10^{-17}$ and an instability of $4.8 \times 10^{-15}/\sqrt{ \tau } $. Referenced to a stationary clock of TOC-729-1, the geopotential difference measurements are realized by moving TOC-729-3 to three different locations and the relevant altitude differences are measured with uncertainties at the level of 20 cm. After correcting the systematic shifts (including gravitational red shift), the two-clock frequency difference is measured to be $-0.7(2.2) \times 10^{-17}$, considering both the statistic $(1.0 \times 10^{-17})$ and the systematic $(1.9 \times 10^{-17})$ uncertainties. The frequency difference between these two clocks is within their respective uncertainties, verifying the reliability of transportable $^{40}$Ca$^{+}$ optical clocks at the low level of 10$^{-17}$.     

Elastic collisions between Si and D atoms at low temperatures and accurate analytic potential energy function and molecular constants of the SiD（χ^2П） radical

Interaction potential of the SiD(X2Π) radical is constructed by using the CCSD(T) theory in combination with the largest correlation-consistent quintuple basis set augmented with the diffuse functions in the valence range. Using the interaction potential, the spectroscopic parameters are accurately determined. The present D0, De, Re, ωe, αe and Be values are of 3.0956 eV, 3.1863 eV, 0.15223 nm, 1472.894 cm-1, 0.07799 cm-1 and 3.8717 cm-1, respectively, which are in excellent agreement with the measurements. A total of 26 vibrational states is predicted when J=0 by solving the radial Schro¨dinger equation of nuclear motion. The complete vibrational levels, classical turning points, initial rotation and centrifugal distortion constants when J=0 are reported for the first time, which are in good accord with the available experiments. The total and various partial-wave cross sections are calculated for the elastic collisions between Si and D atoms in their ground states at 1.0×10-11–1.0×10-3 a.u. when the two atoms approach each other along the SiD(X2Π) potential energy curve. Four shape resonances are found in the total elastic cross sections, and their resonant energies are of 1.73×10-5, 4.0×10-5, 6.45×10-5 and 5.5×10-4 a.u., respectively. Each shape resonance in the total elastic cross sections is carefully investigated. The results show that the shape of the total elastic cross sections is mainly dominated by the s partial wave at very low temperatures. Because of the weakness of the shape resonances coming from the higher partial waves, most of them are passed into oblivion by the strong s partial-wave elastic cross sections.     

Determination of the stellar reaction rate for 12C（α,γ）16O： using a new expression with the reaction mechanism

The astrophysical reaction rate of 12C(α, γ)16O plays a key role in massive star evolution. However, this reaction rate and its uncertainties have not been well determined yet, especially at T9=0.2. The existing results even disagree with each other to a certain extent. In this paper, the E1, E2 and total (E1+E2) 12C(α, γ)16O reaction rates are calculated in the temperature range from T9=0.3 to 2 according to all the available cross section data. A new analytic expression of the 12 C(α, γ)16 O reaction rate is brought forward based on the reaction mechanism. In this expression, each part embodies the underlying physics of the reaction. Unlike previous works, some physical parameters are chosen from experimental results directly, instead of all the parameters obtained from fitting. These parameters in the new expression, with their 3σ fit errors, are obtained from fit to our calculated reaction rate from T9=0.3 to 2. Using the fit results, the analytic expression of 12C(α, γ)16O reaction rate is extrapolated down to T9=0.05 based on the underlying physics. The 12C(α, γ)16 O reaction rate at T9=0.2 is (8.78 ± 1.52) × 1015 cm3s-1mol-1. Some comparisons and discussions about our new 12 C(α, γ)16 O reaction rate are presented, and the contributions of the reaction rate correspond to the different part of reaction mechanism are given. The agreements of the reaction rate below T9=2 between our results and previous works indicate that our results are reliable, and they could be included in the astrophysical reaction rate network. Furthermore, we believe our method to investigate the 12C(α, γ)16O reaction rate is reasonable, and this method can also be employed to study the reaction rate of other astrophysical reactions. Finally, a new constraint of the supernovae production factor of some isotopes are illustrated according to our 12C(α, γ)16O reaction rates.     

Physical analysis of normally-off ALD Al2O3/GaN MOSFET with different substrates using self-terminating thermal oxidation-assisted wet etching technique

Based on the self-terminating thermal oxidation-assisted wet etching technique, two kinds of enhancement mode Al$_{2}$O$_{3}$/GaN MOSFETs (metal-oxide-semiconductor field-effect transistors) separately with sapphire substrate and Si substrate are prepared. It is found that the performance of sapphire substrate device is better than that of silicon substrate. Comparing these two devices, the maximum drain current of sapphire substrate device (401 mA/mm) is 1.76 times that of silicon substrate device (228 mA/mm), and the field-effect mobility ($\mu_{\rm FEmax}$) of sapphire substrate device (176 cm$^{2}$/V$\cdot$s) is 1.83 times that of silicon substrate device (96 cm$^{2}$/V$\cdot$s). The conductive resistance of silicon substrate device is 21.2 $\Omega {\cdot }$mm, while that of sapphire substrate device is only 15.2 $\Omega {\cdot }$mm, which is 61% that of silicon substrate device. The significant difference in performance between sapphire substrate and Si substrate is related to the differences in interface and border trap near Al$_{2}$O$_{3}$/GaN interface. Experimental studies show that (i) interface/border trap density in the sapphire substrate device is one order of magnitude lower than in the Si substrate device, (ii) Both the border traps in Al$_{2}$O$_{3}$ dielectric near Al$_{2}$O$_{3}$/GaN and the interface traps in Al$_{2}$O$_{3}$/GaN interface have a significantly effect on device channel mobility, and (iii) the properties of gallium nitride materials on different substrates are different due to wet etching. The research results in this work provide a reference for further optimizing the performances of silicon substrate devices.     

High density Al2O3/TaN-based metal--insulator-- metal capacitors in application to radio frequency integrated circuits

Metal-insulator-metal （MIM） capacitors with atomic-layer-deposited Al2O3 dielectric and reactively sputtered TaN electrodes in application to radio frequency integrated circuits have been characterized electrically. The capacitors exhibit a high density of about 6.05 fF/μm^2, a small leakage current of 4.8 × 10^-8 A/cm^2 at 3 V, a high breakdown electric field of 8.61 MV/cm as well as acceptable voltage coefficients of capacitance （VCCs） of 795 ppm/V2 and 268ppm/V at 1 MHz. The observed properties should be attributed to high-quality Al2O3 film and chemically stable TaN electrodes. Further, a logarithmically linear relationship between quadratic VCC and frequency is observed due to the change of relaxation time with carrier mobility in the dielectric. The conduction mechanism in the high field ranges is dominated by the Poole-Frenkel emission, and the leakage current in the low field ranges is likely to be associated with trap-assisted tunnelling. Meanwhile, the Al2O3 dielectric presents charge trapping under low voltage stresses, and defect generation under high voltage stresses, and it has a hard-breakdown performance.     

High energy electron radiation effect on Ni/4H-SiC SBD and Ohmic contact

The Ni/4H-SiC Schottky barrier diodes (SBDs) and transfer length method (TLM) test patterns of Ni/4H-SiC Ohmic contacts were fabricated, and irradiated with 1~MeV electrons up to a dose of 3.43× 10¹⁴~e/cm^-2. After radiation, the forward currents of the SBDs at 2~V decreased by about 50%, and the reverse currents at -200~V increased by less than 30%. Schottky barrier height (φ _B ) of the Ni/4H-SiC SBD increased from 1.20~eV to 1.21~eV under 0~V irradiation bias, and decreased from 1.25~eV to 1.19~eV under -30~V irradiation bias. The degradation of φ _B could be explained by the variation of interface states of Schottky contacts. The on-state resistance (R_s) and the reverse current increased with the dose, which can be ascribed to the radiation defects in bulk material. The specific contact resistance (\rho_c) of the Ni/SiC Ohmic contact increased from 5.11× 10⁵~Ωega.cm² to 2.97× 10^-4~Ωega.cm².     

Evaluation of second-order Zeeman frequency shift in NTSC-F2

Caesium atomic fountain clock is a primary frequency standard, which realizes the duration of second. Its performance is mostly dominated by the frequency accuracy, and the C-field induced second-order Zeeman frequency shift is the major effect, which limits the accuracy improvement. By applying a high-precision current supply and high-performance magnetic shieldings, the C-field stability has been improved significantly. In order to achieve a uniform C-field, this paper proposes a doubly wound C-field solenoid, which compensates the radial magnetic field along the atomic flight region generated by the lead-out single wire and improves the accuracy evaluation of second-order Zeeman frequency shift. Based on the stable and uniform C-field, we launch the selected atoms to different heights and record the magnetically sensitive Ramsey transition|F = 3, mF=-1 → |F = 4, mF=-1 central frequency, obtaining this frequency shift as 131.03×10~(-15) and constructing the C-field profile(σ = 0.15 n T). Meanwhile, during normal operation, we lock NTSC-F2 to the central frequency of the magnetically sensitive Ramsey transition |F = 3, mF=-1 → |F = 4, mF=-1 fringe for ten consecutive days and record this frequency fluctuation in time domain. The first evaluation of second-order Zeeman frequency shift uncertainty is 0.10×10~(-15). The total deviation of the frequency fluctuation on the clock transition induced by the C-field instability is less than 2.6×10~(-17). Compared with NTSC-F1, NTSC-F2, there appears a significant improvement.     

Temperature-frequency dependence and mechanism of dielectric properties for γ-Y2Si2O7

This paper reports that single-phase γ-Y2Si2O7 is prepared via a sufficient blending and cold-pressed sintering technique from Y2O3 powder and SiO2 nanopowder. It studies the dielectric properties of γ-Y2Si2O7 as a function of the temperature and frequency. The γ-Y2Si2O7 exhibits low dielectric loss and non-Debye relaxation behaviour from 25 to 1400℃ in the range of 7.3-18 GHz. The mechanism for polarization relaxation of the as-prepared γ-Y2Si2O7 differing from that of SiO 2 is explained. Such particular dielectric properties could potentially make specific attraction for extensive practical applications.     

Enhanced optical nonlinear absorption of graded Au--TiO2 composite films

This paper reports that single-layer and graded Au-TiO2 granular composite films with Au atom content 15%- 66% were prepared by using reactive co-sputtering technique. The third-order optical nonlinearity of single-layer and graded composite films was investigated by using s- and p-polarized Z-scans in femtosecond time scale. The nonlinear absorption coefficient βeff of single-layer Au-TiO2 films is measured to be -2.3×10^3-0.76×10^3 cm/GW with Au atom content 15%-66%. The βeff value of the 10-layer Au-TiO2 graded film is enhanced to be -2.1×10^4cm/GW calculated from p-polarized Z-scans, which is about ten times the maximum βeff of single-layer films. Broadened response in the wavelength region 730-860 nm of the enhanced optical nonlinearity of graded Au-TiO2 composite films was also investigated.