Secondary electron emission characteristics of graphene films with copper substrate

For modern and future circular accelerators, especially high-intensity proton synchrotrons or colliders, the electron cloud effect is a key issue. So, in order to reduce the electron cloud effect, exploring very low secondary electron yield (SEY) material or coating used in vacuum tubes becomes necessary. In this article, we studied the SEY characteristics of graphene films with different thicknesses which were deposited on copper substrates using chemical vapor deposition. The SEY tests were done at temperatures of 25℃ and vacuum pressure of (2-6)×10^-9 torr. The properties of the deposited graphene films were investigated by X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy. The SEY curves show that the number of graphene layers has a great effect on the SEY of graphene films. The maximum SEY of graphene films decreases with the increase of the number of layers. The maximum SEY of 6-8 layers of graphene film is 1.25. These results have a great significance for next-generation particle accelerators.     

Graphene with the secondary amine-terminated zigzag edge as a line electron emitter

An extraordinary low vacuum barrier height of 2.30?eV has been found on the zigzag-edge of graphene terminated with the secondary amine via the ab?initio calculation. This edge structure has a flat band of edge states attached to the gamma point where the transversal kinetic energy is vanishing. We show that the field electron emission is dominated by the flat band. The edge states pin the Fermi level to a constant, leading to an extremely narrow emission energy width. The graphene with such edge is a promising line field electron emitter that can produce a highly coherent emission current.     

Two-dimensional emission patterns of secondary electrons from graphene layers formed on SiC(0 0 0 1)

We used spectroscopic photoemission and low-energy electron microscopy to measure two-dimensional (2D) emission patterns of secondary electrons (SEs) emitted from graphene layers formed on SiC(0 0 0 1). The 2D SE patterns measured at the SE energies of 0-50 eV show energy-dependent intensity distributions in the 6-fold symmetry. The SE patterns exhibit features ascribed to energy band structures of 2D free electrons, which would prove that electrons are partially confined in thin graphene layers even above the vacuum level.     

A comparison of the field emission characteristics of vertically aligned graphene sheets grown on different SiC substrates

The field emission （FE） properties of vertically aligned graphene sheets （VAGSs） grown on different SiC substrates are reported. The VAGSs grown on nonpolar SiC （10-10） substrate show an ordered alignment with the graphene basal plane-parallel to each other, and show better FE features, with a lower turn-on field and a larger field enhancement factor. The VAGSs grown on polar SiC （000-1 ） substrate reveal a random petaloid-shaped arrangement and stable current emission over 8 hours with a maximum emission current fluctuation of only 4%. The reasons behind the differing FE characteristics of the VAGSs on different SiC substrates are analyzed and discussed.     

金属基底对石墨烯薄膜阴极气体击穿稳定性影响

利用石墨烯二维材料极好的场发射能力和发射稳定性,提出了石墨烯阴极提高气体开关击穿稳定性的技术路线。采用化学气相沉积法和基底腐蚀转移法两种方法制备金属基底石墨烯薄膜阴极。利用扫描电子显微镜和拉曼光谱表征了石墨烯薄膜阴极质量,确认了石墨烯层数和均匀性。实验研究了两种石墨烯薄膜阴极气体开关,在微秒脉冲均匀电场作用下的击穿特性,获得了击穿电压幅值和分散性的变化规律。结果表明:当气体为0.6 MPa N2、电极间距为5 mm时,铜基底石墨烯薄膜阴极平均击穿电压为85.9 kV,相对标准差为3.2%;不锈钢基底石墨烯薄膜阴极平均击穿电压仅为59.8 kV,相对标准差为2.4%。当两种阴极击穿电压均为80 kV时,相对标准差比较,不锈钢基底仅为铜基底的44%。分析认为,不锈钢基底石墨烯薄膜质量优于铜基底,石墨烯薄膜导致阴极表面微观场增强因子更高,表面分布更均匀,在电场作用下场致发射产生均匀稳定的大量初始电子流,降低了气体开关击穿电压,有效提高了击穿稳定性。     

The field emission of vacuum filtered graphene films reduced by microwave

A green, convenient, and inexpensive approach to producing graphene field emitters has been developed. Graphite oxide (GO) produced by hummer method was reduced to graphene in a microwave synthesis system. The vacuum filtration method made it possible to form pure and uniform graphene thin films without any additives and it's easy to transfer to other substrates. Transmission electron microscopy (TEM), X-ray diffraction (XRD), and UV-vis diffuse reflectance spectroscopy (UV-vis) measurements proved that the graphene prepared by microwave has nearly the same reduction level as that prepared by hydrazine. The results of field emission testing demonstrated that graphene films reduced by microwave are more suitable as field emitters than those reduced by hydrazine, which pave a way to mass-produce low-cost graphene emitter for field emission applications.     

氦,氢,氮空心阴极放电的真空紫外辐射特性

介绍了一种水冷、陶瓷封接结构的空心阴极放电装置.研究了He、H_2、N_2在120nm～20Onm范围内该装置的真空紫外辐射特性,获得了100～600mA电流范围内的辐射强度与放电电流的关系,以及充气气压变化对它的影响.实验表明:在实验条件下,主要发射谱线为氮的原子线和氦的离子线;辐射谱线强度在0.03～0.72mW·cm~(-2);气压改变时,N_2、H_2辐射强度有一极大值,而He的离子线辐射强度则出现二个极大;在He/H_2混合气体放电时,随着He的加入,氢分子带光谱有明显下降.     

Effect of screening on the emissivity of field electron emitters based on carbon nanotubes

The effect of screening on the emissivity of a field cathode built around a carbon nanotube array is analyzed. A numerical method of solving the Laplace equation for intricate-shape cathodes is developed that makes it possible to relate the amplification factor to the nanotube spacing in arrays containing as many as 225 emitters. Mutual screening of the tubes, which shows up in the dependence of the field amplification factor on the average emitter spacing, is studied numerically. The optimal spacing between the tubes that provides an emission current maximum density at a given applied voltage is determined. The role of edge effects in carbon nanotube screening is established.     

Features of the Development of Electron-Optical Systems for Pulsed Terahertz Traveling-Wave Tubes (Review)

We present an analysis of the current state and development of pulsed amplifying traveling-wave tubes for terahertz radiation operation at frequencies of at least 200 GHz, as well as the development prospects of the principles of creating electron-optical and magnetic systems. The possibility of using field emission cathodes based on carbon nanotubes for constructing an electron-optical system with the compression of a sheet beam is discussed. A numerical simulation of a field emission electron gun forming a sheet electron beam for traveling-wave tubes of the terahertz range is carried out.

     

石墨烯/柔性基底复合结构双向界面切应力传递问题的理论研究

界面力学性能是影响石墨烯/柔性基底复合结构整体力学性能的关键因素,因此对该结构界面切应力传递机理的研究十分必要.考虑了石墨烯和基底泊松效应的影响,本文提出了二维非线性剪滞模型.对于基底泊松比相比石墨烯较大的情况,利用该模型理论研究了受单轴拉伸石墨烯/柔性基底结构的双向界面切应力传递问题.在弹性粘结阶段,导出了石墨烯双向正应变和双向界面切应力的半解析表达式,分析了不同位置处石墨烯正应变和界面切应力的分布规律.导出了石墨烯/柔性基底结构发生界面滑移的临界应变,结果表明该临界应变低于利用经典一维非线性剪滞模型得到的滑移临界应变,并且明显受到石墨烯宽度尺寸以及基底泊松比大小的影响.基于二维非线性剪滞模型建立有限元模型(FEM),研究了界面滑移阶段石墨烯双向正应变和双向界面切应力的分布规律.与一维非线性剪滞模型的结果对比表明,当石墨烯宽度较大时,二维模型和一维模型对石墨烯正应变、界面切应力以及滑移临界应变的计算结果均存在较大差别,但石墨烯宽度很小时,二维模型可近似被一维模型代替.最后,通过与拉曼实验结果的对比,验证了二维非线性剪滞模型的可靠性,并得到了石墨烯/聚对苯二甲酸乙二醇酯(PET)基底结构的界面刚度(100 TPa/m)和界面剪切强度(0.295 MPa).     

Two-dimensional space-charge-limited emission: beam-edge characteristics and applications

There is, at present, no analytic solution that extends Child-Langmuir space-charge-limited emission beyond 1D. Herein, we investigate the characteristics of planar diode electron emission in 2D space with the emphasis on the transition region between the beam and vacuum. Current density above that predicted by Child-Langmuir is observed near the beam edges in a 2D finite element, electrostatic ray-tracing code. The properties of these increased current density "wings" are examined and then discussed in terms of their applications to cathodes which have large reservoirs of free electrons.     

绿色荧光粉Gd2Ba3B3O12:Tb3+的发光性能研究

采用高温同相法制备了一系列Gd<,2>Ba<,3>B<,3>O<,12>:Tb<'3+>绿色荧光粉,借助X射线粉末衍射仪(XRD)、真空紫外光谱和荧光光谱仪(VUV-UV)对样品的物相、发光性能进行了表征.结果表明,Tb<'3+>作为发光中心全部进入到基质Gd<,2>Ba<,3>B<,3>O<,12>的品格中并占据Gd...     

Characteristics of secondary electron emission from few layer graphene on silicon (111) surface

As a typical two-dimensional (2D) coating material, graphene has been utilized to effectively reduce secondary electron emission from the surface. Nevertheless, the microscopic mechanism and the dominant factor of secondary electron emission suppression remain controversial. Since traditional models rely on the data of experimental bulk properties which are scarcely appropriate to the 2D coating situation, this paper presents the first-principles-based numerical calculations of the electron interaction and emission process for monolayer and multilayer graphene on silicon (111) substrate. By using the anisotropic energy loss for the coating graphene, the electron transport process can be described more realistically. The real physical electron interactions, including the elastic scattering of electron—nucleus, inelastic scattering of the electron—extranuclear electron, and electron—phonon effect, are considered and calculated by using the Monte Carlo method. The energy level transition theory-based first-principles method and the full Penn algorithm are used to calculate the energy loss function during the inelastic scattering. Variations of the energy loss function and interface electron density differences for 1 to 4 layer graphene coating GoSi are calculated, and their inner electron distributions and secondary electron emissions are analyzed. Simulation results demonstrate that the dominant factor of the inhibiting of secondary electron yield (SEY) of GoSi is to induce the deeper electrons in the internal scattering process. In contrast, a low surface potential barrier due to the positive deviation of electron density difference at monolayer GoSi interface in turn weakens the suppression of secondary electron emission of the graphene layer. Only when the graphene layer number is 3, does the contribution of surface work function to the secondary electron emission suppression appear to be slightly positive.     

Analysis of characteristic X-ray generation induced by laser plasma electrons accelerated by an electric field

The results of experiments devoted to the study of spectral, spatial, and time characteristics of a spectrally bright point x-ray source based on a vacuum diode with a laser-plasma cathode and a titanium needle anode with a photon energy approximately equal to 4.5 keV are presented. The experimental results revealed a considerable difference between the electron emission from laser plasma in a strong electric field and the explosive electron emission and demonstrated the effectiveness of laser plasma as an electron source. The optimization of the laser radiation power density, the accelerating voltage, and the interelectrode spacing made it possible to create a point x-ray source whose spectral brightness exceeds available sources in the class of small-size pulse x-ray instruments (tubes with explosive cathodes). It has been proved experimentally that the maximum contrast of the characteristic lines of the anode material is attained in the case of an optimal choice of accelerating voltage. The x-ray source has the following parameters: (1) spectral brightness of the K-lines of titanium of the order of 10²¹ photons/cm² s sr keV; (2) emitting region size of 250 mm; and (3) laser pulse duration less than 20 ns.     

Electron field emission from single-walled carbon nanotube nonwoven

Field emission from single-walled carbon nanotube (SWNT) nonwoven has been investigated under high vacuum with different vacuum gaps. A low turn-on electric field of 1.05\,V/$\mu $m is required to reach an emission current density of 10 $\mu $A/cm$^{2}$. An emission current density of 10 mA/cm$^{2}$ is obtained at an operating electric field of 1.88\,V/$\mu $m. No current saturation is found even at an emission current of 5\,mA. With the vacuum gap increasing from 1 to 10 mm, the turn-on field decreases monotonically from 1.21 to 0.68\,V/$\mu $m, while the field amplification is augmented. The good field-emission behaviour is ascribed to the combined effects of the intrinsic field emission of SWNT and the waved topography of the nonwoven.     

Converting of the 2D graphene to its 3D by chicken red blood cells as sheets separator for construction supercapacitor electrode

Here, we report on a facile green and scalable method for the fabrication of porous 3D graphene as a well-known carbon-based material used in many energy storage devices. Chicken red blood cells were used as sheets spacer and heteroatom sources in the construction of 3D graphene. First, the red blood cells were separated from the blood and mixed with graphene oxide. Then, the mixture was freeze-dried and carbonized at 700 °C. The resulted 3D graphene containing heteroatoms was used as a supercapacitor electrode modifier on a glassy carbon electrode and tested with various electrochemical techniques. The supercapacitor electrode showed a specific capacitance of 330 F g⁻¹ at a current density of 1 A g⁻¹, maximum power density of 1958 W kg⁻¹, and maximum energy density of 85 Wh kg⁻¹. Furthermore, the supercapacitive performances were tested in a two-electrode symmetrical system which exhibited a specific capacitance of 238 F g⁻¹ for 1 A g⁻¹. It also showed a power density of 2200 W kg⁻¹ and an appreciable energy density of 160 Wh kg⁻¹. The excellent electrochemical behavior of 3D graphene indicates the promising abilities of the composite for other applications such as biosensors, batteries, electrocatalysts, etc.     

半导体薄膜场发射中的膜厚影响

考虑到薄膜中的电子散射,发展与完善了现有的场发射F-N(Fowler-Nordheim)模型,理论研究了不同厚度的半导体薄膜对其场发射性能的影响。结果表明:薄膜厚度对场发射性能的影响是非常显著的,随着薄膜厚度的增加,将相继出现极差膜厚值与最佳膜厚值,理论计算很好地验证了已有的实验结果;并进一步理论分析了半导体薄膜场发射性能随膜厚变化行为的物理实质,其可能来源于有效隧穿势垒面积的改变及电流密度在薄膜中的散射衰减。     

边界修饰醚基的锯齿形石墨烯纳米条带的场发射的第一性原理研究

采用一种基于密度泛函理论计算的自洽方法研究了边界修饰有C-O-C醚基的锯齿形石墨烯纳米条带(包括边界有连续的醚基ZGNR-CE和50%覆盖度的醚基ZGNR-AE)的电子场发射特性. 模拟结果显示两种纳米条带的场发射主要由布里渊区中心且靠近费米面的电子态所决定. 因为具有较低的功函数,ZGNR-CE条带能产生比未修饰的重构锯齿形石墨烯纳米条带强很多的场发射电流;而ZGNR-AE条带有着几乎完全自旋极化的场发射电流,尽管电流不够强. 另外在较低的外电场下,单轴方向的外加应变能有效调控它们的场发射电流,但ZGNR-AE条带的高自旋极化保持不变. 通过分析这些条带的功函数、能带结构以及结合边界电偶极模型,揭示了相关机制.     

Residual gas properties in a field emission device with ZnO emitters

In this paper, a vacuum system is employed to compare the emission stabilities of the same ZnO cathode in a sealed field emission （FE） device and under ultrahigh vacuum （UHV） conditions. It is observed that the emission current is more stable under the UHV level than in the device. When all conditions except the ambient gases are kept unchanged, the emission current degradation is mainly caused by the residual gases in the sealed device. The quadrupole mass spectrometer （QMS） equipped on the vacuum system is used to investigate the residual gas components. Based on the obtained QMS data, the following conclusions can be drawn： the residual gases in ZnO-FE devices are H2, CH4, CO, Ar, and CO2. These residual gases can change the work function at the surface through adsorption or ion bombardment, thereby degrading the emission current of the cathode.     

Initiation of vacuum breakdown and failure mechanism of the carbon nanotube during thermal field emission

The carbon nanotube(CNT)-based materials can be used as vacuum device cathodes. Owing to the excellent field emission properties of CNT, it has great potentials in the applications of an explosive field emission cathode. The falling off of CNT from the substrate, which frequently appears in experiments, restricts its application. In addition, the onset time of vacuum breakdown limits the performance of the high-power explosive-emission-cathode-based diode. In this paper, the characteristics of the CNT, electric field strength, contact resistance and the kind of substrate material are varied to study the parameter effects on the onset time of vacuum breakdown and failure mechanism of the CNT by using the finite element method.