Analyzing the effects of post couplers in DTL tuning by the equivalent circuit model

Stabilization of the accelerating field in Drift Tube Linac（DTL） is obtained by inserting Post Couplers（PCs）. On the basis of the equivalent circuit model for the DTL with and without asymmetrical PCs, stabilization is deduced quantitatively： we let δω/ω0 be the relative frequency error, then we discover that the sensitivity of field to perturbation is proportional to √δω/ω0 without PCs and to δω/ω0 with PCs. Then we adapt the circuit model of symmetrical PCs for the case of asymmetrical PCs. The circuit model shows how the slope of field distribution is changed by rotating the asymmetrical PCs and illustrates that the asymmetrical PCs have the same effect as the symmetrical ones in stabilization.     

Nonlinear polarization rotation-induced pulse shaping in a stretched-pulse ytterbium-doped fiber laser

We report on controllable pulse shaping in a Yb-doped stretched-pulse fiber laser followed by a high-power chirped pulse amplifier. We demonstrate that the pulses after an extra-cavity grating pair change their intensity profile from Lorentz to Gaussian and then to sech2 shapes by adjusting the intra-cavity polarization through a quarter-wave plate inside the fiber laser cavity. The laser pulses with different pulse shapes exhibit pulse-to-pulse amplitude fluctuation of -- 1.02%, while the sech2-shaped pulse train is provided with a more stable free-running repetition rate as a result of the stronger self-phase modulation in the fiber laser cavity than Lorentz- and Gaussian-shaped pulse trains.     

Mode control in a high gain relativistic klystron amplifier with 3 GW output power

Higher mode excitation is very serious in the relativistic klystron amplifier, especially for the high gain relativistic amplifier working at tens of kilo-amperes. The mechanism of higher mode excitation is explored in the FIC simulation and it is shown that insufficient separation of adjacent cavities is the main cause of higher mode excitation. So RF lossy material mounted on the drift tube wall is adopted to suppress higher mode excitation. A high gain S-band relativistic klystron amplifier is designed for the beam current of 13 kA and the voltage of 1 MV. PIC simulation shows that the output power is 3.2 GW when the input power is only 2.8 kW.     

Hybrid plasmon waveguides with metamaterial substrate and dielectric substrate:A contrastive study

Hybrid plasmon waveguides, respectively, with metamaterial substrate and dielectric substrate are investigated and analyzed contrastively with a numerical finite element method. Basic properties, including propagation length Lp, effective mode area Aeff, and energy distribution, are obtained and compared with waveguide geometric parameters at 1.55 gin. For the waveguide with metamaterial substrate, propagation length Lp increases to several tens of microns and effective mode area Aeff is reduced by more than 3 times. Moreover, the near field region is expanded, leading to potential applications in nanophotonics. Therefore, it could be very helpful for improving the integration density in optical chips and developing functional components on a nanometer scale for all optical integrated circuits.     

Collective Excitations and Nonlinear Dynamics of 1D BEC with Two- and Three-body Interactions in Anharmonic Traps

The collective excitations of low-dimensional Bose-Einstein condensates with two- and three-body interactions in anharmonic potentials are investigated. Using the standard variational approach, the governing equations of motions for the low-energy excitations are obtained by solving time-dependent Gross-Pitaevskii-Ginzburg equation, and the excitation spectrums are calculated in small amplitude limit. The frequency shift and nonlinear mode coupling induced by the anharmonic distortion （adding cubic, quartic, or quintic terra to a harmonic trap） are studied.     

A power and wavelength detuning-dependent hysteresis loop in a single mode Fabry-Prot laser diode

In this paper, we observe experimentally the optical bistability induced by the side-mode injection power and wave-length detuning in a single mode Fabry-Prot laser diode (SMFP-LD). Results show that the bistability characteristics of the dominant and injected modes are strongly dependent on the injected input optical power and wavelength detuning in an SMFP-LD. We observe three types of hysteresis loops: counterclockwise, clockwise, and butterfly hysteresis with various loop widths. In the case of a bistability loop caused by injection power, the transition from counterclockwise to clockwise in the hysteresis direction with the wavelength detuning from 0.028 nm to 0.112 nm is observed in a way of butterfly hysteresis for the dominant mode by increasing the wavelength detuning. The width of hysteresis loop, induced by wavelength detuning is also changed while the injection power is enhanced from 7 dBm to 5 dBm.     

Superconducting quantum interference devices with different damped junctions operated in directly coupled current- and voltage-bias modes

We investigate niobium thin film superconducting quantum interference devices （SQUIDs） with different Steward- McCumber parameters βc operated in both current- and voltage-bias modes. We experimentally prove that there is no difference between the two bias modes with respect to the SQUID intrinsic noise and the noise contribution from the preamplifier. Furthermore, the relationships of the SQUID dynamic parameters, （Rd）current bias ≈ （Rd）voltage bias and （σV/σФ）current bias ≈ [σi/σФ）Rd]voltage bias, are always satisfied. For a strongly damped SQUID withβc ≈ 0.25, addi- tional positive feedback （APF） and noise cancellation （NC） were employed to enhance σV/σФ, the former showing a degradation in the linear flux range but otherwise the same with NC. For a weakly damped SQUID with βc ≈ 3, it is di- rectly connected to the preamplifier without APF or NC, and a low SQUID system noise of about 4μФ0/x/Hz is measured, which is close to its intrinsic noise.     

Coverage Dependence of Growth Mode in Heteroepitaxy of Ni on Cu（100） Surface

A realistic kinetic Monte Carlo （KMC） simulation model with physical parameters is developed, which well reproduces the heteroepitaxial growth of multilayered Ni thin film on Cu（100） surfaces at room temperature. The effects of mass transport between interlayers and edge diffusion of atoms along the islands are included in the simulation model, and the surface roughness and the layer distribution versus total coverage are calculated. Speeially, the simulation model reveals the transition of growth mode with coverage and the difference between the Ni heteroepitaxy on Cu（100） and the Ni homoepitaxy on Ni（100）. Through comparison of KMC simulation with the real scanning tunneling microscopy （STM） experiments, the Ehrlich-Schwoebel （ES） barrier Ees is estimated to be 0.18±0.02 eV for Ni/Cu（100） system while 0.28 eV for Ni/Ni（100）. The simulation also shows that the growth mode depends strongly on the thickness of thin film and the surface temperature, and the critical thickness of growth mode transition is dependent on the growth condition such as surface temperature and deposition flux as well.     

Effect of passive structure and toroidal rotation on resistive wall mode stability in the EAST tokamak

If βN exceeds no-wallβN, the plasma will be unstable because of external kink and resistive wall mode(RWM). In this article, the effect of the passive structure and the toroidal rotation on the RWM stability in the experimental advanced superconducting tokamak(EAST) are simulated with CHEASE and MARS codes. A model using a one-dimensional(1D)surface to present the effect of the passive plate is proved to be credible. The no wall βN limit is about 3li, and the ideal wall βN limit is about 4.5li on EAST. It is found that the rotation near the q = 2 surface and the plasma edge affects the RWM more.     

Evolution of the 251 cm-1 temperature in infrared phonon mode with Ba0.6K0.4Fe2As2

The far-infrared optical reflectivity of an optimaUy doped Ba1-xKxFe2As2 （x = 0.4） single crystal is measured from room temperature down to 4 K. We study the temperature dependence of the in-plane infrared-active phonon at 251 em-1. This phonon exhibits a symmetric line shape in the optical conductivity, suggesting that the coupling between the phonon and the electronic background is weak. Upon cooling down, the frequency of this phonon continu- ously increases, following the conventional temperature dependence expected in the absence of a structural or magnetic transition. The intensity of this phonon is temperature independent within the measurement accuracy. These observa- tions indicate that the structural and magnetic phase transition might be completely suppressed by chemical doping in the optimally doped Bao.6Ko.4Fe2As2 compound.     

Nonsingular terminal sliding mode approach applied to synchronize chaotic parameters and systems with unknown nonlinear inputs

This paper deals with the design of a novel nonsingular terminal sliding mode controller for finite-time synchro-nization of two different chaotic systems with fully unknown parameters and nonlinear inputs. We propose a novel nonsingular terminal sliding surface and prove its finite-time convergence to zero. We assume that both the master＇s and the slave＇s system parameters are unknown in advance. Proper adaptation laws are derived to tackle the unknown parameters. An adaptive sliding mode control law is designed to ensure the existence of the sliding mode in finite time. We prove that both reaching and sliding mode phases are stable in finite time. An estimation of convergence time is given. Two illustrative examples show the effectiveness and usefulness of the proposed technique. It is worthwhile noticing that the introduced nonsingular terminal sliding mode can be applied to a wide variety of nonlinear control problems.     

Generation of squeezed TEM01 modes with periodically poled KTiOPO4 crystal

Spatial quantum optics and quantum information based on the high order transverse mode are of importance for the super-resolution measurement beyond the quantum noise level. We demonstrated experimentally the transverse plane TEM01 Hermite-Gauss quantum squeezing. The squeezed TEM01 mode is generated in a degenerate optical parametric amplifier with the nonlinear crystal of periodically poled KTiOPO4. The level of 2.2-dB squeezing is measured using a spatial balance homodyne detection system.     

Observation of the Heavy Baryons Sigma b and Sigma b*

We report an observation of new bottom baryons produced in pp collisions at the Tevatron. Using 1.1 fb(-1) of data collected by the CDF II detector, we observe four Lambda b 0 pi+/- resonances in the fully reconstructed decay mode Lambda b 0-->Lambda c + pi-, where Lambda c+-->pK* pi+. We interpret these states as the Sigma b(*)+/- baryons and measure the following masses: m Sigma b+=5807.8 -2.2 +2.0(stat.)+/-1.7(syst.) MeV/c2, m Sigma b- =5815.2+/-1.0(stat.)+/-1.7(syst.) MeV/c2, and m(Sigma b*)-m(Sigma b)=21.2-1.9 +2.0(stat.)-0.3+0.4(syst.) MeV/c2.     

Remarks on interpretations of the Eotvos experiment and misinterpretation of E=mc^2

The Eotvos experiment on the verification of equivalence between inertial mass and gravitational mass of a body is famous for its accuracy. A question is, however, can these experimental results be applied to the case of a physical space in general relativity, where the space coordinates could be arbitrary？ It is pointed out that it can be validly applied because it has been proven that Einstein＇s equivalence principle for a physical space must have a frame of reference with the Euclidean-like structure. Will claimed further that such an overall accuracy can be translated into an accuracy of the equivalence between inertial mass and each type of energy. It is shown that, according to general relativity, such a claim is incorrect. The root of this problem is due to an inadequate understanding of special relativity that produced the famous equation E=mc^2, which must be understood in terms of energy conservation. Concurrently, it is pointed out that this error is a problem in Will＇s book, ‘Theory and Experiment in Gravitational Physics＇.     

Status and accuracy of the Monte Carlo generators for luminosity measurements

The status and accuracy of the precision Monte Carlo generators used for luminosity measurements at flavour factories is reviewed. It is shown that, thanks to a considerable, long-term effort in tuned comparisons between the predictions of independent programs, as well as in the validation of the generators against the presently available calculations of the next-to-next-to-leading order QED corrections to Bhabha scattering, the theoretical accuracy reached by the most precise tools is of about one per mille. This error estimate is valid for realistic experimental cuts, appears to be quite robust and is already sufficient for very accurate luminosity measurements. However, recent progress and possible advances to further improve it are also discussed.     

Beam tail effect of a performance-enhanced EC-ITC RF gun

The beam tail effect of multi-bunches will influence the electron beam performance in a high intensity thermionic RF gun. Beam dynamic calculations that illustrate the working states of single beam tail and multi-pulse feed-in of a performance-enhanced EC-ITC （external cathode independent tunable cavity） RF gun for an FEL （free electron laser） injector are performed to estimate the extracted bunch properties. By using both Parmela and homemade MATLAB codes, the effects of a single beam tail as well as interactions of multi-pulses are analyzed, where a ring-based electron algorithm is adopted to calculated RF fields and the space-charge field. Furthermore, the procedure of unexpected deviated-energy particles mixed with an effective bunch head is described by the MATLAB code as well. As a result, the performance-enhanced EC-ITC RF gun is proved to have the capability to extract continual stable bunches suitable for a high requirement THz-FEL.     

First-Principles Calculations of Atomic and Electronic Properties of T1 and In on Si（111）

The atomic and electronic structures of T1 and In on Si（111） surfaces are investigated using the firstprinciples total energy calculations. Total energy optimizations show that the energetically favored structure is 1/3 ML T1 adsorbed at the T4 sites on Si（111） surfaces. The adsorption energy difference of one T1 adatom between （√3 × √3） and （1 × 1） is less than that of each In adatom. The DOS indicates that TI 6p and Si 3p electrons play a very important role in the formation of the surface states. It is concluded that the bonding of TI adatoms on Si（111） surfaces is mainly polar covalent, which is weaker than that of In on Si（111）. So T1 atom is more easy to be migrated than In atom in the same external electric field and the structures of T1 on Si（111） is prone to switch between （√3 × √3） and （1 × 1）.     

Coordinated Control of Multi-Agent Systems with a Varying-Velocity Leader and Input Saturation

In this paper, we investigate a leader-following tracking problem for multi-agent systems with bounded inputs. We propose a distributed bounded protocol for each follower to track a leader whose states may not be completely measured. We theoretically prove that each agent can follow the leader with estimable track errors. Finally, some numerical simulations are presented to illustrate our theoretical results.     

Entropy of Quantum Dynamical Systems and Sufficient Families in Orthomodular Lattices with Bayessian State

The purpose of the present paper is to study the entropy hs（Ф） of a quantum dynamical systems Ф = （ L, s, Ф）, where s is a bayessian state on an orthomodular lattice L. Having introduced the notion of entropy hs（ Ф, A） of partition A of a Boolean algebra B with respect to a state s and a state preserving homomorphism Ф, we prove a few results on that, define the entropy of a dynamical system hs（Ф）, and show its invariance. The concept of sufficient families is also given and we establish that hs （Ф） comes out to be equal to the supremum of hs （Ф,A）, where A varies over any sufficient family. The present theory has then been extended to the quantum dynamical system （ L, s, Ф）, which as an effect of the theory of commutators and Bell inequalities can equivalently be replaced by the dynamical system （B, s0, Ф）, where B is a Boolean algebra and so is a state on B.     

Design and construction progress of BRIF

A new RIB project, the Beijing Radioactive Ion-beam Facility （BRIF）, has been running at CIAE since 2004. In this project, a 100 MeV H-cyclotron, CYCIAE-100, is selected as the driving accelerator providing a 75-100 MeV, 200-500 μA proton beam. An ISOL system employs two stage separators to reach the mass resolution of 20000. Its RIB beam will be injected into the existing Tandem and a superconducting booster installed down stream of the Tandem will increase the energy by 2 MeV/q. The progress of BRIF, giving special emphasis to CYCIAE-100, will be introduced in this paper.