Resonator fiber optic gyros with light time-division input and multiplexing output in clockwise and counterclockwise directions

A resonator fiber optic gyro with the light time-division input and multiplexing output(TDM-RFOG)in the clockwise(CW)and counterclockwise(CCW)directions is proposed.The light time-division input in the CW and CCW directions can effectively suppress the backscattering induced noise.The TDM-RFOG is implemented with the 2×2 Mach–Zehnder interferometer(MZI)optical switch.The response time of the fiber ring resonator is analyzed,and it is demonstrated by experiments that light time-division input in the CW and CCW directions can reduce the backscattering induced noise.The suppression effectiveness of backscattering induced noise in the TDM-RFOG is determined by the extinction ratio of the optical switch,so a closed loop is designed to adjust the phase shift difference between the two arms of the MZI optical switch to control the extinction ratio.The method using two arms of the MZI optical switch with twin 90°polarization-axis rotated splices is proposed to make the extinction ratio along both slow and fast axes greater than-70 d B.     

Output Characteristics of an InP/InGaAsP Triangle Microcavity Laser

Mode competitions between modes with different output coupling efficiencies can result in optical bistability under certain asymmetric nonlinear gain. For a GaInAsP/InP equilateral triangle microlaser with the side length of 10μm, the drop of the output power with the increase of the injection current is observed corresponding to transverse mode transitions. Furthermore, the measured laser spectra up to 270K show that lasing modes coexist with the wavelength interval of 39nm at 240K. The emission at 5.2THz can be expected by the mode frequency beating with the 39nm interval.     

Optical bistability and multistability in a three-level Δ-type atomic system under the nonresonant condition

Under a nonresonant condition, we theoretically investigate hybrid absorptive-dispersive optical bistability and multistability behaviours in a three-level Δ-type system by using a microwave field to drive a hyperfine transition between two upper excited states inside a unidirectional ring cavity. We find that the optical bistability and multistability behaviours can be controlled by adjusting the intensity of the microwave field or the intensity of the coherent coupling field. Furthermore, our studies show an interesting phenomenon of the transition from the optical bistability to the optical multistability only by changing the negative detuning of the coupling field into the positive detuning of the coupling field.     

Realization of a low threshold multiwavelength brillouin/erbium fiber laser by optimizing the reflected power

A multiwavelength Brillouin/erbium fiber laser (BEFL) with low threshold power is realized. A low threshold power of 3 mW and a wide tuning range of 18 nm can be achieved by controlling the reflected power in the nonlinear optical loop mirror (NOLM). Up to 24 lines with a wavelength spacing of 0.086 nm are generated at the Brillouin pump and at the 1 480-nm pump with 0.5 dBm (0.9 mW) and 25 mW of power, respectively.     

Optical bistability in tunable fiber laser using fiber Mach-Zehnder interferometer

In this letter, a novel mechanism of hybrid optical bistability is proposed by using nonlinear mechanism in the frequency domain. This device is based on electro-optical feedback through the fiber Bragg grating on piezoelectric transducer (PZT) to tune continuous wave (CW) fiber laser. The optical bistable characteristics for two manners of separately alternating input power and bias voltage are discussed. The smallest wavelength shift of the order of 0.001 nm needed to realize a switching process in this optical bistability device is estimated. The potential applications of this device in the optical fiber sensor technique are also discussed.     

Optical bistability in tunable fiber laser using fiber Mach-Zehnder interferometer

In this letter, a novel mechanism of hybrid optical bistability is proposed by using nonlinear mechanism in the frequency domain. This device is based on electro-optical feedback through the fiber Bragg grating on piezoelectric transducer (PZT) to tune continuous wave (CW) fiber laser. The optical bistable characteristics for two manners of separately alternating input power and bias voltage are discussed. The smallest wavelength shift of the order of 0.001 nm needed to realize a switching process in this optical bistability device is estimated. The potential applications of this device in the optical fiber sensor technique are also discussed.     

Polarization properties of elliptical core non-hexagonal symmetry polymer photonic crystal fibre

In this paper, polarization properties and propagation characteristics of polymer photonic crystal fibres with elliptical core and non-hexagonal symmetry structure are investigated by using the full vectorial plane wave method. The results show that the birefringence of the fibre is induced by asymmetries of both the cladding and the core. Moreover, by adjusting the non-symmetrical ratio factor of cladding $\eta$ from 0.4 to 1 in step 0.1, we find the optimized design parameters of the fibre with high birefringence and limited polarization mode dispersion, operating in a single mode regime at an appropriate wavelength range. The range of wavelength approaches the visible and near-infrared which is consistent with the communication windows of polymer optical fibres.     

Coherent combining of tunable erbium-doped fiber lasers by a single-mode fiber feedback loop

We experimentally demonstrate the coherent combining of two tunable erbium-doped fiber lasers by using a single-mode fiber feedback loop configuration. A single-mode fiber is arranged in the feedback loop to filter the far-field pattern, and the energy of desired in-phase mode is collected and injected into the resonators of two component fiber lasers. The coherently combined laser is tunable over a wide spectrum ranging from 1536 to 1569 nm, which means that the combining scheme is compatible with wavelength tuning. The effects and necessity of whether adopting polarization controlling measures or not in component lasers are investigated in detail. The results indicate that adding polarization controlling can improve the array＇s coherence, whereas it will decrease the output power and efficiency simultaneously.     

A Novel Atomic Guiding Using a Blue-Detuned TE0i Mode in Hollow Metallic Waveguides

We propose a novel scheme to guide cold atoms using a blue-detuned TE01 doughnut mode in a hollow metallic aveguide, calculate the electromagnetic field distribution of the TErn mode in the hollow metallic waveguide,and compare the attenuation characters of the EH11 and TErn mode in the hollow metallic waveguide. We also alculate the optical potential of the TErn doughnut mode for two-level ^85Rb atoms and estimate the photon cattering rate. It is found that when the detuning δ = 300 GHz, the photon scattering induced heating can e neglected, and the optical potential (Umax=570 mK) of the TErn mode is high enough to load cold atoms(120μK) from a standard magneto-optical trap and to guide them in the hollow metallic waveguide, which is a esirable scheme to realize a computer-controlled atom lithography with an arbitrary pattern.     

Widely tunable linear-cavity multiwavelength fiber laser with distributed Brillouin scattering

We demonstrate a multiple wavelength Brillouin/erbium fiber laser in a linear cavity configuration.The laser cavity is made up of a fiber loop mirror on one end of the resonator and a virtual mirror generated from the distributed stimulated Brillouin scattering effect on the other end.Due to the weak reflectivity provided by the virtual mirror,self-lasing cavity modes are completely suppressed from the laser cavity.At Brillouin pump and 1480-nm pump powers of 2 and 130 mW,respectively,11 channels of the demonstrated laser with an average total power of 7.13 dBm can freely be tuned over a span of 37-nm wavelength from 1530 to 1567 nm.     

互注入锁定产生双波长可调谐光脉冲的实验研究

报道了两个增益开关调制的法布里-珀罗半导体激光器互注入锁定实验方案,可产生双波长可调谐光脉冲。该装置对两个结构基本相同的法布里珀罗半导体激光器做增益开关调制,产生多模光脉冲输出;然后利用两个光纤光栅作为滤波元件,通过调节可调谐光延迟线(VODL2),可使得双波长光脉冲在两个法布里-珀罗激光器之间相互注入锁定．从而在输出端得到高边模抑制比的双波长光脉冲输出。然后再通过应力作用在两个光纤光栅上以改变它们的反射波长和适当调整另一个可调谐光延迟线(VODLI)长度．可得到不同的双波长的光脉冲输出,而重复频率保持524．6MHz不变。在13．2nm调谐范围内边模抑制比高于25dB．系统稳定且波长调节方便。     

高速大容量光纤光栅解调仪的研究

采用半导体光放大器和可调谐法布里-珀罗滤波器,以环路结构组成高速扫描激光器,结合光耦合器、光环路器和光电二极管等,形成4通道大容量高速光纤光栅解调仪。系统采用2kHz的类三角波调制信号,驱动法布里-珀罗滤波器在50nm的光谱范围内进行快速扫描。通过引入光纤梳状滤波器和单峰滤波器组成的参考通路,消除法布里-珀罗滤波器的非线性效应和扫描波长漂移问题,使得解调仪具有很好的稳定性和线性度。高速光纤光栅解调仪的稳定性为2pm,分辨率为1pm,线性度为0.99957,测量精度为5pm,解调频率为2kHz。     

利用法布里-珀罗腔抑制电光相位调制中的剩余幅度调制

激光经电光相位调制后,由于剩余幅度调制的存在造成调制边带幅度不相等。利用法布里-珀罗腔的透射特性和Pound-Drever-Hall技术对通过法布里-珀罗腔的调制光正、负一级边带的幅度产生不同的衰减,使得调制边带的幅度相等,从而实现对电光相位调制中剩余幅度调制的抑制。采用该方法,理论上计算了调制光经法布里-珀罗腔后的光外差光谱信号,获得锁定法布里-珀罗腔后调制边带幅度的不对称度较腔锁定前减小四个数量级。实验研究了调制光经法布里-珀罗腔透射的光外差光谱,结果表明将法布里-珀罗腔锁定于该透射光外差光谱中心零位时,对剩余幅度调制的抑制程度可达45 dB。     

An all-polarization-maintaining repetition-tunable erbium-doped passively mode-locked fiber laser

An environmentally stable, repetition rate tunable, all-polarization-maintaining, Er-doped pulse fiber laser with a single-wall carbon nanotubes saturated absorber is demonstrated. The ring laser cavity includes a delay line enabling a tunable repetition rate to vary from 35.52 MHz to 35.64 MHz with continuous mode-locked operation. The laser output parameters confirm that the tunable mode-locked operations are stable. High environmental stability is also confirmed by the -130 dBc/Hz low phase noise, a 70-dB signal-to-noise ratio of radio frequency signals, a low amplitude fluctuation of 5.76 × 10-4, and a low fluctuation of reoetition rate of 12 Hz. The laser shows a high de~ree of oolarization of 93%.     

激光二极管自混合干涉的计算分析和实验观察

实验上观察到自混合干涉信号的幅度仅仅为静态光强的百分之几.反馈光会引起激光二极管阈值电流减小,静态输出光强变化几倍,使激光二极管工作在实际的阈值电流之上.按三镜法布里-珀罗腔结构模型计算激光二极管的出射光强,由干涉函数主极大条件得出光频与反馈光的关系.计算出的自混合干涉信号的波形,以及自混合干涉信号的幅度与静态光强的比值均同实验测量结果一致.在τrC/τ1=22.8的情况下,复合谐振腔可同时有15个谐振模式,这些模随外腔长度的变化小于2.6×10-2cm-1,远小于法布里-珀罗谐振腔谐振模的线宽3.1cm-1,光频在内腔谐振模的线宽以内变化.     

10 GHz全光帧时钟提取的理论和实验研究

提出了一种新型的10 GHz全光帧时钟提取的提取方案。采用低精细度的法布里-珀罗(F-P)滤波器直接提出帧时钟,保证帧时钟的快速建立和快速消失。利用半导体光放大器(SOA)的自增益调制效应(SGM)对法布里-珀罗滤波器提取的帧时钟进行整形,降低帧时钟的幅度噪声。并推导了法布里-珀罗滤波器的精细度和半导体光放大器的自增益调制效应对帧时钟建立时间、消失时间的影响。通过理论分析表明,利用半导体光放大器的自增益调制效应可以降低帧时钟的幅度噪声并加快帧时钟建立速度。实验中,用上述方案对10.075 GHz的帧信号进行了全光帧时钟提取,得到了建立时间为8个信号周期,消失时间为22个信号周期,抖动为2.35 ps的帧时钟信号。     

Single atom as a mirror of an optical cavity

By tightly focusing a laser field onto a single cold ion trapped in front of a far-distant dielectric mirror, we could observe a quantum electrodynamic effect whereby the ion behaves as the optical mirror of a Fabry-Pérot cavity. We show that the amplitude of the laser field is significantly altered due to a modification of the electromagnetic mode structure around the atom in a novel regime in which the laser intensity is already changed by the atom alone. We propose a direct application of this system as a quantum memory for single photons.     

用傅里叶变换谱稳定法布里-珀罗型光纤水听器的工作点

介绍了闭环反馈控制法稳定法布里-珀罗型光纤水听器相位工作点的基本原理,给出了法布里-珀罗型光纤水听器的声压相移灵敏度的表达式,推导了法布里-珀罗干涉透射光强替代函数的傅里叶变换解析式,用MathCAD软件绘制了该式对应的傅里叶变换谱线,通过谱线可以直观地了解系统输出信号的组成和特点。在实验中用频谱分析仪器记录了法布里-珀罗型光纤水听器透射光强的傅里叶变换谱,与软件仿真的理论谱线较好地吻合。通过实验进一步指出反馈临界点频率的选择方法,检验了反馈控制法在法布里-珀罗型光纤水听器相位工作点稳定过程中的实际效果,证明了该方法的可行性。     

基于法布里-珀罗半导体激光器实现高重复频率光脉冲的时钟分频

实验研究了重复速率为6.32 GHz的光脉冲注人法布里-珀罗(Fabry-Perot)半导体激光器实现3.16 GHz光脉冲输出的时钟分频现象,讨论了 Fabry-Perot半导体激光器的偏置电流、注入光功率、注入光光谱以及光谱线宽等因素对时钟分频的影响.利用光注入半导体激光器产生的周期二振荡非线性动力学特性.实现了高重复速率光脉冲的时钟分频.研究表明,当注入光的光谱较窄且锁定Fabry-Perot半导体激光器某一纵模时,在较低的偏置电流和一定的注入光功率时,时钟分频才能发生.采用半导体激光器的速率方程.通过数值模拟,研究了半导体激光器的偏置电流和线宽增强因子以及注入光功率对时钟分频的影响,所得结果与实验结果相吻合.     

用于激光冷却的半导体激光器大频差边模注入锁定的理论及实验研究

利用注入锁定技术实现了与自由运转频率相差1300?GHz的大功率半导体激光器的边模注入 锁定.实验上利用饱和吸收谱和光学外差拍方法详细研究了锁定后主从激光器之间的相干转 移特性,并测量了注入光功率与锁频范围的关系和注入锁定模式建立过程,与利用带注入项 的多模速率方程得到的边模注入锁定的范围相吻合.理论上计算了实现边模注入锁定所满足 的注入光阈值条件,并作了实验验证. 关键词：