光谱调制反射镜的数控加工控制结构函数

在千焦耳拍瓦高功率放大系统设计中,激光脉冲的时空和光谱整形技术一直受到人们的广泛关注.利用经光学微纳超精细加工而成的电介质结构反射镜可在高功率条件下实现啁啾脉冲的光谱整形.在光谱整形介质结构反射镜的设计与制造中,需要根据加工精度来合理设计数控加工的控制结构函数以及加工刻蚀深度结构函数.针对神光Ⅱ千焦耳拍瓦高功率放大系统设计中提出的多层介质光谱调制反射镜,推导出数控加工的控制结构函数及其刻蚀深度结构甬数,并通过数值模拟计算,分析了调制结构反射镜逼近调制函数的效果及其光谱调制特性.     

用于钕玻璃啁啾脉冲放大系统光谱整形的多层介质膜反射镜

在千焦拍瓦高功率啁啾脉冲放大系统设计中,为了尽量消除增益窄化和增益饱和效应的影响,同时尽可能提高高功率激光输出脉冲信噪比参数,激光脉冲时空和光谱的整形问题备受关注.提出一种光谱整形新方法,利用特定结构的多层介质膜反射镜,可实现对大能量高功率啁啾脉冲钕玻璃放大系统中啁啾脉冲的光谱整形.研究结果表明,只要合理选择多层介质膜系的结构参数,可有效地控制其反射率分布,且在保证反射相位基本不变的条件下其调制度可超过60%.针对钕玻璃1053nm波长设计而成的光谱整形反射镜,反射带宽可达到196nm,色分辨率约为0.1 关键词： 介质反射膜 光谱整形 千焦拍瓦 啁啾脉冲     

基于铌酸锂双折射晶体的皮秒拍瓦激光系统光谱整形

为补偿皮秒拍瓦激光系统中钕玻璃宽带放大引起的增益窄化,提出了一种基于铌酸锂双折射晶体的高能量光谱整形方法.在相同强度调制下,对比了BBO、铌酸锂和石英3种晶体,针对1053 nm激光,选用了高双折射率、大口径且不易潮解的铌酸锂作为整形晶体.理论分析了晶体厚度、倾斜角、面内旋转角对强度调制的影响,发现它们分别决定调制的带宽、中心波长及深度.并对整形过程中晶体引入的光谱相位进行了分析,发现各阶色散量随晶体厚度、倾斜角、面内旋转角变化的规律,因此可通过上述参数控制各阶色散量.在此基础上,开展了中心波长为1053 nm、带宽为10 nm、调制深度为80%的光谱整形实验和相位测量实验,实验与理论分析相一致.针对神光Ⅱ皮秒拍瓦激光系统,利用上述整形方案,国内首次实现了1700 J, 6 nm (FWHM)的高能宽带激光输出,有效补偿了增益窄化.研究结果对国内基于钕玻璃放大系统的宽频带激光装置的工程研制具有重要意义.     

变栅距光栅实现啁啾脉冲光谱整形

为了充分利用放大介质的增益带宽,获得脉宽更短,功率更高的输出脉冲,需要将输入到主放大链的种子脉冲进行光谱整形来补偿放大过程中的增益窄化效应。提出了利用变栅距反射光栅实现中心波长1053nm,谱宽6nm啁啾脉冲的光谱整形。运用严格的光栅衍射耦合波理论分析光栅的衍射特性,发现该方案不会引入相位畸变。分别计算和分析了刻槽深度、入射角大小、光栅周期以及入射光波长的变化对衍射效率的影响,通过选取适当的光栅参量可获得0.5%~84%的光谱调制深度。     

高功率超短脉冲激光系统中光谱增益窄化补偿的调制函数

 设计了一种与高功率超短脉冲激光放大过程中获得的总增益、增益介质的带宽、激光带宽、脉冲中心波长等参数相关的调制函数，对激光放大过程中的光谱增益窄化进行补偿。此调制函数的优越性在于，对不同性能的激光系统，无需改变调制函数的形式就能适用。通过数值模拟的方法，讨论了在不同增益介质带宽、激光带宽、脉冲中心波长下的补偿效果。此调制函数在高功率超短脉冲激光系统中有良好的应用前景。     

钕玻璃啁啾脉冲放大器产生百焦耳亚皮秒脉冲

以钕玻璃为增益介质研制了高能啁啾脉冲激光放大器系统,实验演示输出啁啾脉冲能量在百焦耳量级时,光谱宽度保持在4—6 nm.最大能量168 J,相应谱宽5.5 nm,中心波长1054 nm.压缩脉冲宽度最短710 fs. 关键词： 啁啾脉冲放大 钕玻璃 高能拍瓦     

啁啾脉冲的光谱整形

为了获得更高功率的输出激光脉冲,需要将注入到主放大链的种子脉冲进行光谱整形来补偿放大过程中的增益窄化效应.利用展宽器中啁啾脉冲的光谱具有空间排布的特点.采用石英晶体平凸透镜空间光强度调制器间接地实现窄带激光脉冲的光谱整形,在展宽器的输出端获得了光谱呈平顶分布的种子啁啾脉冲.通过调节偏振片的透偏方向,可方便地调谐输山脉冲光谱的形状.     

液晶空间光调制器光谱整形的理论研究

 将液晶空间光调制器用于超高斯种子脉冲光谱整形,重点分析了调制器参数对压缩脉冲信噪比的影响,以此为依据对其结构参数进行优化设计,以降低其影响。对整形、放大及压缩过程的理论模拟表明:应用液晶空间光调制器进行光谱整形时,能够有效克服钕玻璃啁啾脉冲放大系统的非线性效应,在放大器输出端保持原始光谱宽度,但液晶空间光调制器对光谱的调制作用使压缩脉冲信噪比降低。     

高功率钕玻璃啁啾脉冲放大系统光谱整形

增益窄化效应限制了啁啾脉冲放大系统输出的最短脉冲宽度,需要对注入放大系统的种子啁啾脉冲进行光谱整形,以保证放大后的啁啾脉冲光具有足够的带宽并满足特定的光谱分布.理论上假定放大后啁啾脉冲的光谱分布为高斯分布或超高斯分布,对"百焦耳级钕玻璃啁啾脉冲放大系统"进行逆运算.研究发现,所需种子啁啾光的能量、带宽以及压缩后脉冲的信噪比都与该分布密切相关.通过光谱整形,使放大后的啁啾脉冲光的光谱分布为二阶超高斯分布.能够获得小于400 fs高信噪比的超短脉冲输出,此时所需种子啁啾脉冲能量仅为33μJ,带宽14 nm,在装置前级注入能力的范围之内.为百焦耳装置光谱整形实验的开展提供了理论指导.     

大口径多层介质膜光栅衍射效率测量及其在制作工艺中的应用

多层介质膜光栅是高功率激光系统的关键光学元件.为了满足国内强激光系统的迫切需求, 在大口径多层介质膜光栅的研制过程中,建立了单波长自准直条件下的衍射效率测量方法及其误差分析. 结果表明误差主要由探测器的噪声和测试人员的差异产生,对衍射效率测试精度的影响是±1%. 在此基础上,将光栅衍射效率及其分布测量技术应用于光栅制作工艺中, 作为大口径光栅无损检测的一种手段,如判断光栅掩模是否能进行离子束刻蚀、 离子束刻蚀的在线监测和是否需要再刻蚀,从而实现对大口径多层介质膜光栅离子束刻蚀过程的定量、 科学控制,提高了离子束刻蚀光栅制作工艺的成功率.利用上述技术,已成功研制出多块最大尺寸为 430 mm× 350 mm、线密度1740线/mm、平均衍射效率大于95%的多层介质膜光栅. 实验结果表明,该方法操作简单、测量快速准确,不必检测光栅微结构. 为大口径多层介质膜光栅研制的无损检测工程化奠定了基础.     

Wide angular range operation of a dielectric multilayer film with a photonic-crystal-type defect

Light can tunnel through a high-reflectivity dielectric multilayer film when a photonic-crystal-type defect is introduced in the structure, which is useful for optical signal processing. We consider chirped structures with a defect in layer thickness for which high reflectivity is achieved over a broad wavelength range except within a narrow spectral window. The useful transmission window, while it shifts toward shorter wavelengths as the angle of incidence of the light beam is increased, does not, in general, survive; i.e., transmission disappears progressively. We show that wide angular range operation can, however, be achieved by a proper design of the chirped structure. Analytical expressions for the design parameters are derived on the basis of a semi-infinite photonic crystal model. Theoretical reflectance spectra of defect SiO2/TiO2 chirped multilayer films are presented and discussed in terms of the dispersion of the electromagnetic radiation modes of the finite photonic crystal. These devices offer a simple way to mechanically tune (through inclination of the film) the wavelength transmitted from a fixed white-light beam.     

多层介质膜脉冲宽度压缩光栅与超短脉冲作用时的性能分析

基于啁啾脉冲放大技术的超短脉冲激光系统是提供超快、超强激光的重要途径，具有良好输出波形和高损伤阈值的多层介质膜脉冲宽度压缩光栅是获得高峰值功率脉冲激光的关键. 基于傅里叶谱变换方法和严格模式理论，分析了多层介质膜光栅(MDG)在超短脉冲作用下的光学特性. 结果表明，当MDG的反射带宽小于具有高斯分布的入射脉冲的频谱宽度时，-1级反射脉冲呈非对称高斯分布，其前沿出现振荡，并且-1级反射脉冲能量开始剧烈下降. 讨论了MDG结构参数对其反射带宽的影响. 分析了MDG与超短脉冲作用时的近场光分布，对提高其抗激光损 关键词： 脉冲压缩光栅 傅里叶谱变换 模式理论 损伤阈值     

Suppression of gain narrowing in multi-TW lasers with negatively and positively chirped pulse amplification

A laser scheme implementing a combination of negatively and positively chirped pulse amplification (NPCPA) is demonstrated. This method of amplification suppresses spectral narrowing typically appearing in chirped pulse amplification (CPA) lasers thus supporting pulse spectrum much broader than a conventional CPA. With a NPCPA Ti:Sapphire laser we have achieved laser pulses of 50 nm spectral width and 150 mJ energy without any additional spectral correction. The scheme appears as an easy and reliable solution to preserve spectral bandwidth in Ti:Sapphire lasers, especially at high power levels up to the Petawatt regime. PACS 42.60 By, Lh; 42.65 Re     

Temporal contrast improvement in chirped pulse amplification systems by a four-grating compressor and by spectral modifications

The quest for higher peak focused intensities and better temporal contrast drives one to improve the design of all possible stages of the chirped pulse amplification (CPA) system. In this paper, we have analyzed the role of dispersion and spectral profile on the temporal shape and contrast ratio of the output pulse of a CPA system. The simulations indicate that an initial sech² or a Gaussian pulse in the CPA system is best for a good contrast ratio. Incorporating a four-grating based pulse compressor in the CPA system improves the contrast as well as provides the flexibility to compensate the dispersion upto the fourth order. The simulations also detail the effect of spectral profile tailoring on the contrast ratio and peak power.     

多层介质膜偏振无关光栅的研制

介绍了一种应用于光纤激光光谱合束的高衍射效率多层介质膜偏振无关光栅的设计及制作,给出了设计参数、制作流程和最终制作的偏振无关光栅的测量结果,在1.044~1.084μm波长范围内,实验测得的TE偏振光、TM偏振光的平均衍射效率分别为89.7%,93.8%。     

Collimation effects on large CPA compressors

Modelling and analysis have been performed to show a link between laser collimation tolerances and dispersion effects in chirped pulse amplification (CPA) compressors. These show that an un-collimated beam can present itself as residual dispersion in a CPA system which uncorrected will have adverse effects on laser power and intensity. The techniques of shearing interferometry and beam propagation over large distances for setting beam collimation have been assessed for their limitations in measuring wavefront radii. An analysis of the sensitivity of CPA systems to non-collimated beams has been studied. This effect has been practically demonstrated for a high-power Nd:glass laser and the best techniques for alignment are discussed.     

InGaAs circular-grating-coupled surface emitting laser with focusing function fabricated by electron beam writing with circular scanning

We report the design, fabrication and operation of an InGaAs QW circular-grating-coupled surface emitting laser (CGCSEL) which can focus the output laser beam. Circular distributed Bragg reflector and circular chirped grating coupler were fabricated by electron beam lithography employing smooth circular scanning and two step reactive ion etching. Single-mode-like lasing at a wavelength of 978.3 nm was accomplished. Focusing function was confirmed and the focused spot size around 80 μm was obtained.     

Investigation of interface roughness cross-correlation properties of optical thin films from total scattering losses

The interface roughness and interface roughness cross-correlation properties affect the scattering losses of high-quality optical thin films. In this paper, the theoretical models of light scattering induced by surface and interface roughness of optical thin films are concisely presented. Furthermore, influence of interface roughness cross-correlation properties to light scattering is analyzed by total scattering losses. Moreover, single-layer TiO₂ thin film thickness, substrate roughness of K9 glass and ion beam assisted deposition (IBAD) technique effect on interface roughness cross-correlation properties are studied by experiments, respectively. A 17-layer dielectric quarter-wave high reflection multilayer is analyzed by total scattering losses. The results show that the interface roughness cross-correlation properties depend on TiO₂ thin film thickness, substrate roughness and deposition technique. The interface roughness cross-correlation properties decrease with the increase of film thickness or the decrease of substrates roughness. Furthermore, ion beam assisted deposition technique can increase the interface roughness cross-correlation properties of optical thin films. The measured total scattering losses of 17-layer dielectric quarter-wave high reflection multilayer deposited with IBAD indicate that completely correlated interface model can be observed, when substrate roughness is about 2.84 nm.     

300W线偏振飞秒全光纤啁啾脉冲放大系统北大核心CSCD

报道了高平均功率的线偏振啁啾脉冲放大系统。该系统包括全光纤结构的多级放大器以及透射光栅脉冲压缩器。压缩前,实现了近衍射极限光束输出,平均功率425 W,光光效率81%,消光比约13dB;压缩后,获得了平均功率300 W、脉宽315fs、峰值功率12 MW的激光脉冲,为目前报道的最高平均功率的线偏振光纤啁啾脉冲放大系统。