Enhanced performance of InGaN light-emitting diodes with InGaN and composition-graded InGaN interlayers

The effects of InGaN light-emitting diodes (LEDs) with InGaN and composition-graded InGaN interlayers in the space of multiple quantum wells and electron blocking layer are studied numerically. The electrostatic field, energy band diagrams, carrier concentrations, light–current–voltage performances, and internal quantum efficiency (IQE) are investigated. Simulation results show that the light output power and IQE are both largely improved over the conventional LED structure due to the improvement in hole injection efficiency and electron blocking capability, especially for the LED with composition-graded InGaN interlayer.     

Investigation of blue InGaN light-emitting diodes with p-AlGaN/InGaN superlattice interlayer

The blue InGaN light-emitting diodes (LEDs), employing a lattice-compensated p-AlGaN/InGaN superlattice (SL) interlayer to link the last quantum barrier and electron blocking layer (EBL), are proposed and investigated numerically. The simulation results indicate that the newly designed LEDs have better hole injection efficiency, lower electron leakage, and smaller electrostatic fields in the active region over the conventional LEDs mainly attributed to the mitigated polarization-induced downward band bending. Furthermore, the markedly improved output power and efficiency droop are also suggested when the conventional LEDs corresponding to experiment data are replaced by the newly designed LEDs.     

Photoluminescence study of InGaN/GaN multiple-quantum-well with Si-doped InGaN electron-emitting Layer

InGaN/GaN multiple-quantum-well (MQW) structure with Si-doped InGaN electron-emitting layer (EEL) was grown by metal–organic chemical vapor deposition and their characteristics were evaluated by photoluminescence (PL) measurements. In a typical structure, a low indium composition and wide potential well was used to be an EEL, and a six-fold MQW was used to be an active layer where the injected carriers recombine. By comparing the PL spectral characteristics of the MQW samples, the PL intensity of MQW with EEL is about 10 times higher than that of typical MQW. Experimental results indicate that the high electron capture rate of the MQW active region can be achieved by employing EEL.     

Droop improvement in blue InGaN light-emitting diodes with GaN/InGaN superlattice barriers

GaN/InGaN superlattice barriers are used in InGaN-based light-emitting diodes （LEDs）. The electrostatic field in the quantum wells, electron hole wavefunction overlap, carrier concentration, spontaneous emission spectrum, light-current performance curve, and internal quantum efficiency are numerically investigated using the APSYS simulation software. It is found that the structure with GaN/InGaN superlattice barriers shows improved light output power, and lower current leakage and efficiency droop. According to our numerical simulation and analysis, these improvements in the electrical and optical characteristics are mainly attributed to the alleviation of the electrostatic field in the active region.     

Growth and characterization of InGaN nanodots hybrid with InGaN/GaN quantum wells

Uniform InGaN nanodots were successfully grown on SiO₂ pretreated GaN surface. It was found that the InGaN nanodots were 20?nm in diameter and 5?nm in height, approximately. After the growth of two periods of InGaN/GaN quantum wells on the surface of InGaN nanodots, nanodot structure still formed in the InGaN well layer caused by the enhanced phase separation phenomenon. Dual-color emissions with different behavior were observed from photoluminescence (PL) spectrum of InGaN nanodots hybrid with InGaN/GaN quantum wells. A significant blueshift and a linewidth broadening were measured for the low-energy peak as the increase of PL excitation power, while a slight blueshift and a linewidth narrowing occurred for the high-energy peak. Accordingly, these two peaks were assigned to be from the In-rich nanodots and quantized state transition from the InGaN/GaN quantum wells with indium content, respectively.     

Electrical Characteristics of InGaN/AlGaN and InGaN/GaN MQW Near UV-LEDs

Electrical characteristics of In0.05 Ga0.95N/Al0.07Ga0.9aN and In0.05 Ga0.95N/GaN multiple quantum well （MQW） ultraviolet light-emltting diodes （UV-LEDs） at 400hm wavelength are measured. It is found that for InGaN/AlGaN MQW LEDs, both ideality factor and parallel resistance are similar to those of InGaN/GaN MQW LEDs, while series resistance is two times larger. It is suggested that the Al0.07Ga0.93N barrier layer did not change crystal quality and electrical characteristic of p-n junction either, but brought larger series resistance. As a result, InGaN/AlGaN MQW LEDs suffer more serious thermal dissipation problem although they show higher light output efficiency.     

Wavelength Extended InGaAsBi Detectors with Temperature-Insensitive Cutoff Wavelength

We demonstrate a wavelength extended InGaAsBi short-wave infrared photodetector on an InP substrate with the 50% cutoff wavelength up to 2.63μm at room temperature. The moderate growth temperature is applied to balance the Bi incorporation and material quality. Photoluminescence and x-ray diffraction reciprocal space mapping measurements reveal the contents of bismuth and indium in InGaAsBi to be about 2.7% and 76%,respectively. The InGaAsBi detector shows the temperature-insensitive cutoff wavelength with a low coefficient of about 0.96 nm/K. The demonstration indicates the InP-based InGaAsBi material is a promising candidate for wavelength extended short-wave infrared detectors working.     

高质量InGaN的等离子体辅助分子束外延生长和In的反常并入行为

采用射频等离子体辅助分子束外延技术生长得到了In组分精确可控且高质量的In_xGa_1-xN (x ≤ 0.2) 外延薄膜. 生长温度为580 ℃的In_0.19Ga_0.81N薄膜(10.2) 面非对称衍射峰的半高宽只有587弧秒, 背景电子浓度为3.96× 10¹⁸/cm³. 在富金属生长区域, Ga束流超过N的等效束流时, In组分不为零, 即Ga并没有全部并入外延层; 另外, 稍微增加In束流会降低InGaN的晶体质量. 关键词： InGaN 外延薄膜 射频等离子体辅助分子束外延 In 并入 晶体质量     

Study on GaN-based light emitting diode with InGaN/GaN/InGaN multi-layer barrier

The current study investigates GaN-based light-emitting diodes (LEDs) with InGaN/GaN/InGaN multi-layer barrier (MLB). Simulation results show that GaN-based LEDs with MLB have better performance than conventional GaN-based LEDs with only one GaN barrier because of the enhancement in hole injection into the quantum well and decrease in electron leakage current.     

WDM波长路由光网络的波长分配算法

由于WDM网络中的传输和交换是以波长为粒度进行的。因此波长分配算法就成为光网络的研究热点。有效的算法可大大提高波长的利用率，并可充分挖掘WDM的带宽资源。介绍了WDM全光网络中静态和动态波长分配算法，尤其是结合大型网孔网络详述了几种动态波长分配算法。针对波长变换器在全光网络中的应用。提出了一种可以解决任意类型光网络的分层图算法，它可以一次性解决路由选择和波长分配问题，大大提高了该算法的效率。是未来光网络中非常有前景的一种波长分配算法。     

Performance enhancement of an InGaN light-emitting diode with an AIGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode （LED） with an A1GaN/InGaN superlattice （SL） electron-blocking layer （EBL） is studied numerically, which involves the light-current performance curve, internal quan- tum efficiency electrostatic field band wavefunction, energy band diagram carrier concentration, electron current density, and radiative recombination rate. The simulation results indicate that the LED with an A1GaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular A1GaN EBL or a normal A1GaN/GaN SL EBL because of the appropriately modified energy band diagram, which is favorable ibr the injection of holes and confinement of elec- trons. Additionally, the efficiency droop of the LED with an AIGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

Efficiency enhancement of InGaN based blue light emitting diodes with InGaN/GaN multilayer barriers

The advantages of InGaN based light-emitting diodes with InGaN/GaN multilayer barriers are studied.It is found that the structure with InGaN/GaN multilayer barriers shows improved light output power,lower current leakage,and less efficiency droop over its conventional InGaN/GaN counterparts.Based on the numerical simulation and analysis,these improvements on the electrical and the optical characteristics are mainly attributed to the alleviation of the electrostatic field in the quantum wells(QWs) when the InGaN/GaN multilayer barriers are used.     

Alloy-assisted Auger recombination in InGaN

It has been numerically investigated the effect of alloying on the Auger recombination rate in wurtzite type n-InGaN. In order to explicitly take into account the effect of alloy disorder, the calculations have been performed with a 256-atom supercell that includes In and Ga atoms randomly distributed over the supercell sites to obtain a given composition. A full band structure (no band scissors-shifting) and high-dense inhomogeneous k-point grid were used to improve the accuracy of the calculations. We show that the large number of allowed interband Auger transitions originated by the breaking of the translational periodicity plays a crucial role in the wide band gap InGaN alloys. The alloy-assisted Auger coefficients for these alloys are in the 1.0?×?10^?32–4.7?×?10^?31 cm⁶/s range     

Characteristics of InGaN light emitting diode depending on Si-doping on InGaN layers below quantum wells

Effect of Si-doping on InGaN layers below the quantum wells (QWs), which cause different levels of charge concentration in the depletion region, have been investigated for InGaN light emitting diodes (LEDs). Four groups of InGaN LEDs with different levels of Si-doping on InGaN/GaN layers below quantum-wells have been produced for the experiment (i.e., 0.5 × 10¹⁷ cm^?3 for group A, 1 × 10¹⁷ cm^?3 for group B, 5 × 10¹⁷ cm^?3 for group C, and 1 × 10¹⁸ cm^?3 for group D.) The reverse leakage current of LED can be significantly decreased and the light output power of LED can be enhanced by lowering the background charge concentration in the depletion region of LED. Such result enables us to improve the device lifetime by inhibiting the degradation of the GaN-based LED.     

Performance enhancement of an InGaN light-emitting diode with an AlGaN/InGaN superlattice electron-blocking layer

The efficiency enhancement of an InGaN light-emitting diode(LED) with an AlGaN/InGaN superlattice(SL)electron-blocking layer(EBL) is studied numerically,which involves the light-current performance curve,internal quantum efficiency electrostatic field band wavefunction,energy band diagram carrier concentration,electron current density,and radiative recombination rate.The simulation results indicate that the LED with an AlGaN/InGaN SL EBL has better optical performance than the LED with a conventional rectangular AlGaN EBL or a normal AlGaN/GaN SL EBL because of the appropriately modified energy band diagram,which is favorable for the injection of holes and confinement of electrons.Additionally,the efficiency droop of the LED with an AlGaN/InGaN SL EBL is markedly improved by reducing the polarization field in the active region.     

波长转换受限条件下的最优组播波长分配算法

扩展了静态组播路由和波长分配问题,引入了范围受限的波长转换器,改进了优化目标,新的优化目标为整个组播连接使用的波长转换器数目最少,同时保证源节点到每个组播成员的路径上使用的波长转换器数目均小于指定值.利用动态规划,在两种连接建立策略下对问题进行了求解,所得解可用于衡量启发式组播波长分配算法的优劣.     

A GaN AlGaN InGaN last quantum barrier in an InGaN/GaN multiple-quantum-well blue LED

The advantages of a GaN–AlGaN–InGaN last quantum barrier(LQB) in an InGaN-based blue light-emitting diode are analyzed via numerical simulation. We found an improved light output power, lower current leakage, higher recombination rate, and less efficiency droop compared with conventional GaN LQBs. These improvements in the electrical and optical characteristics are attributed mainly to the specially designed GaN–AlGaN–InGaN LQB, which enhances electron confinement and improves hole injection efficiency.     

The effects of InGaN layer thickness on the performance of InGaN/GaN p-i-n solar cells

InGaN/GaN p-i-n solar cells, each with an undoped In0.12Ga0.88N absorption layer, are grown on c-plane sapphire substrates by metal-organic chemical vapor deposition. The effects of the thickness and dislocation density of the absorp- tion layer on the collection efficiency of InGaN-based solar cells are analyzed, and the experimental results demonstrate that the thickness of the InGaN layer and the dislocation density significantly affect the performance. An optimized InGaN- based solar cell with a peak external quantum efficiency of 57% at a wavelength of 371 nm is reported. The full width at half maximum of the rocking curve of the （0002） InGaN layer is 180 arcsec.     

Performance characteristics of deep violet InGaN DQW laser diodes with InGaN/GaN superlattice waveguide layers

The effect of the indium (In) composition of In_xGa_1−xN (GaN) waveguide layers on the performance of deep violet In_0.082Ga_0.918N/GaN double quantum well (DQW) laser diodes (LDs) emitting at 390 nm output emission wavelength has been numerically investigated. Simulation results indicated that by increasing In composition of the In_xGa_1−xN waveguide layers, the threshold current decreases, the slope efficiency, and differential quantum efficiency (DQE) increase, whereas the output power decreases. The increase in the In composition of the InGaN waveguide layers increases the refractive index and consequently increases the optical confinement factor (OCF) which result in the increase in the slope efficiency and DQE and the decrease in the threshold current. The decreasing movement of electron and hole carriers from the bulk waveguide layers to the active regions also causes to decrease the output power. A new LD structure with InGaN/GaN superlattice (SL) waveguide layers has been proposed to exploit the increased OCF of InGaN waveguide structures, and the enhanced electron and hole mobilities and the tunneling effect of the periodic structure of the SL structures. The results also showed that the use of InGaN/GaN SL waveguide structures effectively improves the output power, slope efficiency and DQE and decreases the threshold current of the LD compared with (In)GaN bulk waveguide structure.     

Microchip-Type InGaN Vertical External-Cavity Surface-Emitting Laser

We fabricated microchip-type InGaN vertical external-cavity surface-emitting lasers (VECSELs) integrated with microlenses and investigated their operational properties using an optical pumping method. We confirmed that the multimode lasing operation is consistent with a given VECSEL structure and that there is an optimized curvature radius in terms of the threshold input energy, slope efficiency, and mode stabilization. A simple theory using the Gaussian beam mode provides an excellent explanation of VECSEL lasing properties and the effect of the microlens on lasing.