高非线性光子晶体光纤中飞秒脉冲的传输特性和超连续谱产生机制的实验研究及模拟分析

用实验和数值模拟两种方法研究了高非线性光子晶体光纤中飞秒激光脉冲的传输特性和超连续谱的产生机理，给出了抽运脉冲在三种不同中心波长情况下输出光谱展宽并形成超连续谱的实际测量及理论模拟结果.研究表明：在零色散波长抽运时，光谱展宽以自相位调制为主，同时三阶色散的影响明显，传输脉冲在时域内出现振荡次峰.而在反常色散区抽运时，光谱展宽的初期以自相位调制为主，随后根据抽运功率的不同孤子自频移、高阶光孤子的裂变和四波混频效应会逐渐增强，进而成为光谱展宽的主要原因.与此相应，在时域中能明显看到孤子的形成和红移，飞秒传输脉 关键词： 光子晶体光纤 高非线性光子晶体光纤 飞秒脉冲激光 超连续谱     

单脉冲飞秒激光时域参数测量技术研究

钛宝石飞秒激光放大系统具有重复频率低、脉冲波形复杂等特点，为准确测量其峰值功率，提出对单次脉冲波形和脉冲宽度测量的需求。介绍了单脉冲飞秒激光时域波形和脉冲宽度的测量原理和测量方法，设计了基于频率分辨光学开关法的单脉冲飞秒激光时域参数测量装置。讨论了单脉冲飞秒激光时域参数测量校准面临的问题及解决方法。     

空气飞秒激光成丝现象中产生的椭圆偏振单周期太赫兹脉冲

飞秒激光在空气中形成的等离子体细丝会辐射出太赫兹(THz)信号.实验利用1 mJ,800 nm,50 fs的飞秒激光脉冲产生等离子体细丝.应用光电取样方法探测了激光成丝现象中前向辐射的THz脉冲,得到了持续时间为0.1 ps、光谱峰值在1 THz左右的单周期THz脉冲.转动抽运光的偏振态,分析了电光取样信号的变化.通过比较实验数据和计算结果,证明了成丝辐射THz脉冲的偏振态为椭圆偏振态.     

飞秒脉冲正交位相压缩光的产生

利用锁模飞秒脉冲激光二次谐波为抽运源, 同步抽运单共振光学参量振荡器, 抽运光中心波长为425 nm, 重复率为76 MHz, 脉宽180 fs, 光学振荡器下转换晶体采用Ⅰ类共线PPKTP, 实验上实现了压缩度为2.58 dB的正交位相压缩光.考虑到实验系统的效率, 可以推知光学参量振荡器输出的下转换光压缩度为 4.48 dB. 关键词： 同步抽运光学参量振荡器 压缩光 锁模飞秒脉冲     

飞秒激光作用下全向高反膜破坏的激发过程

设计和制备了全向高反膜SiO₂/TiO₂，研究了它在不同脉冲宽度、不同脉冲能量的飞秒激光作用下的破坏阈值和烧蚀深度.利用发展的抽运-探针方法，研究了抽运脉冲作用下材料中导带电子的超快激发和能量沉积过程，建立并求解了飞秒激光激发材料和材料的激发对抽运光自身反作用的耦合动力学模型.模型较好地揭示了材料破坏的激发过程. 关键词： 飞秒激光 全向高反膜 激发过程 破坏机制     

整形飞秒激光脉冲的成丝超连续辐射控制

飞秒激光成丝超连续辐射具有高强度和高时空相干性等优点,作为一种超宽带光源在很多领域都具有广泛的应用前景.本文提出一种结合微透镜阵列的空间调制和基于液晶空间光调制器的时域整形的飞秒激光脉冲整形方式,利用基于遗传算法的反馈优化控制,实现了飞秒激光在熔融石英中成丝产生的超连续辐射强度的调制,得到了在一定范围内光谱强度可控的超连续辐射光谱;光谱的能量密度可以从0.03μJ/nm调制到0.09μJ/nm,其能量密度变化达到了初始值的3倍.计算了典型迭代代数对应的整形脉冲时域包络,分析了超连续光谱随迭代代数的演化趋势,结果表明,脉冲包络的峰值强度和波形分布是影响超连续光谱展宽和强度的主要物理原因.     

时域飞秒散斑的特性与测量

阐述了飞秒激光脉冲在随机介质传播过程中产生时域散斑的原理,并对时域飞秒散斑进行了测量. 时域飞秒散斑的产生是飞秒脉冲在随机介质中经历多重散射形成的随机干涉现象在时域的体现. 初步讨论了时域散斑的统计特性并给出了相应的实验结果. 关键词： 时域散斑 飞秒脉冲 随机介质     

飞秒钛宝石激光脉冲的载波包络相移测量研究

飞秒激光脉冲的载波包络相移测量与控制是实现阿秒脉冲与光学原子钟的重要内容，在利用光子晶体光纤扩展飞秒钛宝石激光振荡器光谱的研究基础上，通过自参考技术测量并优化了该激光输出脉冲的载波包络相移所引起的拍频信号.实验上采用半导体抽运的倍频Nd:YVO4532nm激光器作为抽运源，对钛宝石激光器所产生的平均功率500mW、脉宽18fs的光脉冲进行拍频测量后观察到约23MHz的频移，对应于每周期053π的载波包络相移.飞秒激光脉冲载波包络相移测量的实现对于进一步利用电子反馈系统精确控制载波包络相移，从而得到高稳定的飞秒激光频率梳具有重要意义. 关键词： 载波包络相移 光子晶体光纤 飞秒 超连续     

飞秒激光脉冲整形技术及其应用

通过频域上控制飞秒激光脉冲幅度、相位和偏振在时域上可以获得几乎任意形状的飞秒激光脉冲,这种飞秒激光脉冲整形技术可为研究光与原子分子非线性相互作用提供一种全新实验技术手段.本文介绍飞秒激光脉冲整形发展历史、技术方法、控制方式及其相关应用,并展望飞秒激光脉冲整形技术未来的发展方向.     

受激布里渊散射光限幅输出波形控制研究

数值模拟了种子场诱导受激布里渊散射光限幅过程的限幅输出波形特性.得到利用种子场控制限幅脉冲波形的规律：选取种子场脉冲宽度为抽运脉冲宽度的五倍，抽运脉冲相对于种子脉冲的延迟时间控制在与抽运脉冲宽度相当时，限幅输出波形最佳.限幅输出波形同时受抽运光功率影响，随抽运能量的增加，限幅脉冲功率不断下降，直至趋于0. 关键词： 受激布里渊散射 限幅输出波形 注入种子     

激光散斑与随机激光器件制作

提出了一种基于大学物理实验教学中激光散斑的随机激光器件的制作,分析了随机激光的分类标准和产生机理,系统考察了不同泵浦条件下该激光器件的输出特性.该实验方案为大学物理实验提供了与科技前沿接轨的素材.     

Tailoring of random lasing characteristics in dye-doped nematic liquid crystals

Amplified spontaneous emission and random lasing are investigated in random systems with dye-doped nematic liquid crystals. And that temporal stability of random lasing is analyzed. The influence of pumping polarization as well as the multiple scattering and reflection between boundaries on the emission behavior and the formation of coherent feedback is investigated in detail. For freely suspended samples, certain emission wavelength can be obtained by changing the pump wavelength. This feature is useful in making wavelength-tunable lasers. Moreover, as the pumping thickness of wedge sample increases, the emission spectrum is red shifted and the average spacing of adjacent spikes decreases. This property can be applied in laser mode selection, i.e., the number of modes within certain wavelength range can be chosen.     

Pump pulse characteristics of quasi-continuous-wave diode-side-pumped Nd:YAG laser

The influence of pumping laser pulse on the property of quasi-continuous-wave (QCW) diode-side-pumped Nd:YAG laser is investigated theoretically and experimentally. Under remaining a fixed duty cycle, the average output power increases, and the corresponding thermal focal length shorten with the increase of the pump pulse duration, which attributes to the decrease of the ratio of pulse buildup time to the pulse duration. At a pump power of 146 W, the laser output power changes from 65.1 W to 81.2 W when the pulse duration is adjusted from 150 μ s to 1000 μ s, confirming a significant enhancement of 24.7%. A laser rate equation model incorporating the amplified spontaneous emission is also utilized and numerically solved, and the simulated results agree well with the experimental data.     

双端泵浦保偏光纤激光器

 以两台808 nm半导体激光器LD1和LD2为泵浦源,对光纤激光器双端泵浦进行了研究,获得了6.5 W的激光输出。实验分别测出了LD1和LD2半导体激光器单端泵浦和双端泵浦时的输出功率,对双端泵浦输出功率与单端泵浦功率之和进行了比较,利用双端泵浦提高了泵浦效率和输出激光功率。同时测量了输出激光的偏振度,通过计算得到双端泵浦输出激光的偏振度为0.5。     

超短脉冲染料放大器中的参数研究

对超短脉冲染料放大器(DLA)中放大的自发辐射(ASE)随泵浦强度变化的关系进行了实验研究,为了求得具有高储能、低自发辐射背景噪声的染料激光放大器的泵浦强度,我们用速率方程对实验结果进行了解析分析,获得了染料激光放大器的泵浦强度与染料参数(浓度、增益长度等)的近似关系式,以及相应条件下染料激光放大器储能和小信号增益的表达式,并与实验进行了比较.二者符合较好,从而为染料激光放大器的设计提供了参考.     

Effective control over the dual-color emitted light waves from one-dimensional random media pumped by Femtosecond-Lasing Pulses

The spectral property of dual-color random laser is investigated by simultaneously solving Maxwell’s equations and rate equations of electronic population in which the pumping rate is described by a time function with duration of hundreds of femtoseconds. Results show that the delay time and peak intensity of the emitted light depends strongly on the pumping process. An effective optimization method is proposed to exercise control over the dual-color laser emission from the dye solution with scattering nano-particles. It is demonstrated numerically that the controllable single mode operation of a dual-color random laser by choosing the proper pump profile and pumping region. The present work enriches the knowledge about random lasers and offers more guidance for relevant experiments.     

染料掺杂聚合物薄膜中金纳米颗粒增强的随机激光

基于金属纳米结构而获得随机激光的增强,其独特的性质及其潜在的应用价值具有重要的研究意义,在表面增强荧光、光学开关器件、表面等离子激元激光等方面实现了较多应用。报道一种快捷有效的制备纳米颗粒的手段并基于该纳米颗粒结构分析了染料掺杂聚合物薄膜涂覆的随机激光现象和规律。利用离子溅射沉积和高温热处理在石英基底上制备了Au纳米颗粒,改变溅射时间Au纳米颗粒的尺寸发生可控变化,该方法便捷、工艺简单。研究采用40,80和120 s三种不同的时间进行Au膜溅射并在650 ℃下高温处理,得到粒径尺寸不同的Au纳米颗粒,随着溅射时间延长Au纳米颗粒的尺寸逐渐变大。通过涂覆有机荧光染料DCJTB掺杂的PMMA聚合物薄膜构建光致激射系统,利用纳秒脉冲激光对样品进行激发,得到随机激光并研究其出射光强度和阈值的变化规律特征。40,80和120 s三种溅射时间下所得Au纳米颗粒的平均粒径尺寸分别为230,250和390 nm,在532 nm激光激发下产生随机激光的阈值分别为20.5,17.5和12.5 μJ·pulse-1。Au纳米颗粒尺寸越大、粒子间距越小时,光子散射的平均自由程越短,光在金属颗粒之间可以多次有效散射,从而显著提高散射效率,产生较低阈值的激光发射;Au纳米颗粒的吸收峰与染料的荧光峰恰好匹配时,将会显著增强染料的荧光效应,激发更多染料分子发生能级跃迁,增加光子态密度,获得峰值更高、阈值更低的激射现象;泵浦光不破坏染料分子的情况下,可以多次循环泵浦获得激光,染料分子的发光效率随着多次激发略有降低,有助于随机激光器件的研究开发。实验研究结果与理论分析相一致,进一步明确了Au纳米颗粒对光子散射和等离子共振对光吸收增强的随机激光发射机理。该研究以Au纳米结构对光子的强散射效应为增益,通过理论分析和实验测量获得随机激光,为实现高效率、低阈值的随机激光研究提供了一种便捷的技术手段,有望促进随机激光器件的开发和应用。     

Electrical pumping of a third-order mode semiconductor laser

AlGaAs-based quantum well laser structures with third-order waveguide mode emission at 775 nm are a promising route toward compact twin-photon sources at 1.55 μm based on the principle of modal phase matching between the pumping frequency and fundamental modes at half frequency in III–V semiconductor waveguides. Following the demonstration and characterization of an optically pumped third-order mode semiconductor laser, in this paper we present data of the corresponding structure under conditions of electrical pumping. By pumping electrically and optically the same sample made for current injection, identical transverse far-field angular laser mode profiles are measured and with very low parasitic losses. Although they do not follow the third-order mode emission pattern as it is expected, however this means that the different way of pumping, that of the electrical one as compared to optical pumping is not responsible for the absence of third-order mode emission. Furthermore, since the undoped optically pumped laser sample correctly emits on the third-order mode, it is concluded that the cladding layers of the structure still need to be optimized in doping and thickness, in order to reduce the internal losses for the third-order mode.     

类Na铜离子软X射线激光初步研究

本文报道在上海光机所LF12~＃激光装置上利用自制极紫外掠入射光栅摄谱仪,进行类Na铜离子复合泵浦软X射线激光研究的初步实验结果,低泵浦条件下(2.5×10~(12)W/cm~2)的光谱表明,得到自发发射放大是有希望的。文章还给出了类Na等电子数序列离子复合激光波长与原子序数的关系及推广到水窗波段的可能性。     

Mode competition of bichromatic laser emission in two-dimensional strong scattering random medium

The mode competition of the bichromatic laser emission in two-dimensional (2D) random medium was studied. Based on the time-dependent theory, a model for dual-wavelength random laser was established. The Maxwell equations and rate equations were combined and solved by using the finite different time domain (FDTD) method. Results show that the emission intensity of both wavelength ranges increases simultaneously with the increasing of the surface-filling fraction. The mode dominance of the bichromatic emission can be switched by changing the scatterer radius. The emission intensity of the longer wavelength increases when enlarging the excitation area. The controllability of these lasing modes may provide a potential application of optical switches.