红色荧光粉La2Mo2O9:Eu3+,W6+的制备及发光性能

采用高温固相法合成出La₂Mo₂O₉:Eu³⁺,W⁶⁺系列红色荧光粉,其结构为立方晶系的β- La₂Mo₂O₉。在395 nm光激发下,样品La_1.40Mo₂O₉:0.60Eu³⁺发射出很强的红光,最强发射峰位于616 nm处。适量地掺杂W⁶⁺离子可以提高样品的激发和发射强度,在395 nm光激发下,La_1.40Mo_1.84O₉:0.60Eu³⁺,0.16W⁶⁺荧光粉的Eu³⁺的⁵D₀→⁷F₂跃迁发射强度最大,是样品La_1.40Mo₂O₉:0.60Eu³⁺的1.23倍。最后,将La_1.40Eu_0.60Mo_1.84O₉:0.16W⁶⁺荧光粉与~395 nm发射的InGaN芯片一起制作成红光发光二极管(LED),该LED发射出很强的红光。     

Effect of co-doped metal caions on the properties of Y_2O_3:Eu~(3+) phosphors synthesized by gel-combustion method

Y_2O_3:Eu~(3+) phosphors co-doped with different metal cations(Li~+, Na~+, K~+, Mg~(2+), Ca~(2+)) are prepared by the gelcombustion method with Y_2O_3, Eu_2O_3, and R(NO3)x(R = Li, Na, K, Mg, Ca) serving as raw materials and glycine as fuel,calcined at 1000?C for 2h. The synthesized Y_2O_3:Eu~(3+) phosphors doped with different metal cations and doping ratios are characterized by x-ray diffractometry(XRD), fluorescence and phosphorescent spectrophotometer. The co-doping metal cations are advantageous to the development of Y_2O_3:Eu~(3+) lattice. All the samples can emit red light peaked at 611 nm under 254-nm excited. The luminescence intensities of co-doping samples are increased because the cations increase the electron transition probability of Eu~(3+) from ~5D_0 level to ~7F level. The fluorescence lifetime of Eu~(3+)(~5D_0→~7F_2) is increased by doping metal cations.     

Non-proportional response of scintillation crystals to X-rays and γ-rays

Data are presented on the relative photon yield of Lu₂SiO₅(Ce³⁺), Cd₂SiO₅(Ce³⁺), CdWO₄, BaF₂, YAlO₃(Ce³⁺) and Lu₃Al₅O₁₂(Sc³⁺) scintillation of crystals on absorption of X-ray and γ-ray photons at energies ranging from 5 keV to beyond 1 MeV.     

Structural modifications of dodecatungstophosphoric acid hexahydrate induced by temperature in the 10–358 K range. In situ high-resolution neutron powder diffraction investigation

Dodecatungstophosphoric acid hexahydrate H₃PW₁₂O₄₀·6H₂O crystal structure has been investigated by neutron powder diffraction (NPD) at different temperatures in the 10–358 K range. A nonconvergent reversible phase transition has been noticed at about 320 K. This transition is associated with a change in dynamic equilibrium of hydrate species and partial reduction/oxidation (redox) W⁶⁺↔W⁵⁺. Expressive structure changes lie in the P---O bonding inside Keggin's anion and the H₅O₂⁺ conformational angle.     

Local microstructural analysis for Y_2O_3/Eu~(3+)/Mg~(2+) nanorods by Raman and photoluminescence spectra under high pressure

In this paper, we investigate the Raman and photoluminescence spectra of Y_2O_3/Eu~(3+) and Y_2O_3/Eu~(3+)/Mg~(2+) nanorods under high pressures using 514-nm and 532-nm laser light excitation. We observe transitions from the initial cubic phase to amorphous at pressures higher than 24 GPa for both Y_2O_3/Eu~(3+) and Y_2O_3/Eu~(3+)/Mg~(2+) nanorods. In addition, Y_2O_3/Eu~(3+) and Y_2O_3/Eu~(3+)/Mg~(2+) nanorods exhibit different distorted states after the pressure has been raised to 8 GPa. The analyses of intensity ratios, I_(0-2)/I_(0-1) from ~5D_(0–)~7F2_to~5D_(0–)~7F_1and I_(0-2)A/B of ~5D_(0–)7F_2 transitions indicate that Y_2O_3/Eu~(3+)/Mg~(2+) nanorods exhibit stronger local micro-surrounding characteristics for Eu~(3+) ions in a pressuremodulated crystal field. The doped Mg2+ion results in reducing the crystal ionicity in the distorted lattice state under high pressures. The use of doped ions as an ion modifier can be applied to the study of small local microstructural changes through Eu~(3+) luminescence.     

五种还原Keggin结构杂多阴离子的ESR谱

本文报道了五种具有Keggin结构的还原杂多阴离子的溶液和-150℃冷冻ESR谱,它们是SiV₂Mo₁₀O₄₀^6-、bSiV₂Mo₉O₄₀^7--、PV₃Mo₉O₄₀^6-、PV₃W₉O₄₀^6-和VV₃W₉O₄₀^6-。在室温下pH≤3时,所有杂多酸阴离子均为8条锐线,pH=7-8时,均为8+15条线并且随着放置时间增长逐步变成8条线。在-150℃时均呈现出V⁴⁺8条线的复杂粉末谱,作者根据一种修正的Ble-aney方法成功地模拟了这些冷冻谱,得出g_‖、g_⊥、A_‖、A_⊥,按照DeArmond理论计算了近似的K、α值并讨论了它们的物理意义。最后从异构体的数目和简并度的观点初步解释了观察不到V₃物种22条超精细线的原因。Back     

SrB4O7：Pr3+,Mn2+中的Pr→Mn能量传递

从能量传递的角度出发,利用同步辐射光源(德国HASYLAB实验室的SUPERLUMI实验站)对Pr³⁺和Mn²⁺掺杂的SrB₄O₇粉末样品进行了光谱研究.206nm激发下,在SrB₄O₇:Pr³⁺(0.1%,摩尔分数)样品中观察到了来自Pr³⁺离子1S0能级的光子级联发射.SrB₄O₇:Pr³⁺样品的发射谱与SrB₄O₇:Mn²⁺样品监测Mn²⁺离子640nm发射的激发谱在330~430nm的波长范围里存在显著的光谱重叠.这个光谱重叠有利于Pr³⁺→Mn²⁺的能量传递发生,从而将Pr³⁺离子级联发射中第一步不实用的紫外或近紫外光子转换为Mn²⁺的红光发射.双掺杂样品SrB₄O₇:Pr³⁺,Mn²⁺与单掺杂样品SrB₄O₇:Pr³⁺的发射谱比较揭示出Pr³⁺→Mn²⁺的能量传递的确存在,并且提供了一种传递效率的估算方法,表明通过“Pr³⁺-Mn²⁺”组合有可能获得量子效率大于1的高效真空紫外激发发光材料.     

光学碱度对Tb3+掺杂Bi2O3-B2O3玻璃发光性能的影响

采用熔融法制备了Tb³⁺掺杂的Bi₂O₃-B₂O₃系统玻璃,使用激发、发射及拉曼光谱分析了光学碱度与玻璃结构及发光性能的关系,同时绘制了Tb³⁺、Bi³⁺和Bi²⁺的能级图。研究结果表明：Tb³⁺掺杂的Bi₂O₃-B₂O₃玻璃由[BO₃]、[BiO₃]、[BO₄]及[BiO₆]共同组成,且随着光学碱度由0.63增加到0.93,玻璃的结构逐渐疏松。高的光学碱度使部分Bi³⁺变为Bi²⁺,发出571 nm（²P_3/2（2）→²P_1/2）的光,Bi³⁺→Tb³⁺的能量降低。在光学碱度及Tb³⁺、Bi³⁺和Bi²⁺离子的共同作用下,随着光学碱度的提高,玻璃的发光颜色由黄绿色变为白色。     

Photoluminescence of green nanophosphors Sr2MgSi2O7 doped with Tb3+ under 374-nm excitation

A series of Sr₂MgSi₂O₇:Tb³⁺ nanophosphors is prepared using a high-temperature solid-state reaction. The x-ray diffraction patterns show that the crystal structure of the sample is not significantly affected by Tb³⁺ ions. However, the images of the scanning electron microscope illustrate that the average size of nanoparticles becomes larger with the increase of Tb³⁺ concentration. Unlike earlier investigations on down-conversion emission of Tb³⁺ ion excited by deep ultraviolet light, in this work, the photoluminescence characteristics of Sr₂MgSi₂O₇ nanophosphors doped with different Tb³⁺ concentrations are analyzed under 374-nm excitations. The intense green emission at 545 nm is observed at an optimal doping concentration of 1.6 mol%. The main reason for the concentration quenching is due to the electric dipole-electric dipole interaction among Tb³⁺ ions.     

SrAl2O4∶Eu2+,Dy3+长余辉发光材料的喷雾热解制备及其表征

采用喷雾热解两段法制备了SrAl₂O₄∶Eu²⁺ ,Dy³⁺长余辉发光材料,并利用XRD、SEM、荧光长余辉亮度测试等方法分析了不同制备工艺条件下SrAl₂O₄∶Eu²⁺ ,Dy³⁺发光材料的结构、形貌以及发光性能的变化。结果表明:采用喷雾热解两段法可制备出球形SrAl₂O₄∶Eu²⁺ ,Dy³⁺长余辉发光材料,SrAl₂O₄∶Eu²⁺ ,Dy³⁺的晶体结构与α-SrAl₂O₄磷石英晶体结构相同。热解温度、还原温度、添加剂对产物的形貌、粒度分布、发光性能有较大影响。较之高温固相法,喷雾热解法制备的SrAl₂O₄∶Eu²⁺ ,Dy³⁺具有发光性能好、形貌好、粒度分布窄等优点。     

Zero and controllable thermal expansion in HfMgMo_(3-x)W_xO_(12)

HfMgMo_(3-x)W_xO_(12) with x = 0.5, 1.0, 1.5, 2.0, and 2.5 are developed with a simple solid state method. With increasing the content of W, solid solutions of Hf Mg Mo3-xWx O12 crystallize in an orthorhombic structure for x≤2.0 and a monoclinic structure for x2.0. A near-zero thermal expansion(ZTE) is realized for HfMgMo_(2.5)W_(0.5)O_(12) and negative coefficients of thermal expansion(NCTE) are achieved for other compositions with different values. The ZTE and variation of NCTE are attributed to the difference in electronegativity between W and Mo and incorporation of a different amount of W, which cause variable distortion of the octahedra and softening of the MoO_4 tetrahedra, and hence an enhanced NCTE in the a- and c-axis and reduced CTE in the b-axis as revealed by Raman spectroscopy and x-ray diffraction.     

长余辉发光材料CaAl2O4∶Eu2+,Gd3+ 的制备和发光性能研究

采用高温固相法制备了CaAl₂O₄∶Eu²⁺,Gd³⁺ 长余辉发光材料。利用X射线衍射(XRD)和荧光光谱测试等手段对所制备的样品进行结构表征和发光性能的分析,探究Eu²⁺摩尔分数为3.5%,硼酸质量分数为0.5%,Gd³⁺摩尔分数分别为2%,3%,4%,5%时样品的发光性能。研究结果表明:实验成功地合成了CaAl₂O₄∶Eu²⁺,Gd³⁺粉晶,并且Eu²⁺和Gd³⁺的引入并未引起CaAl₂O₄晶体结构的改变。样品的激发光谱和发射光谱均为宽带谱,且发射光谱的最大峰值位于444 nm左右,属于Eu²⁺的4f⁶5d→4f⁷跃迁,所发光为蓝光。蓝色荧光粉CaAl₂O₄∶3.5%Eu²⁺,3%Gd³⁺的发光强度最好。     

Sm3+掺杂的SnNb2O6粉体的光谱特性

采用熔盐法制备了Sm³⁺掺杂的SnNb₂O₆粉体, 利用X射线粉末衍射、扫描电子显微镜对其物相和形貌进行了表征, 用激发、发射光谱和荧光寿命对样品的发光性能进行了研究.结果表明:所得样品为单斜晶系的SnNb₂O₆, 在407 nm的激发下, 有较强的橙红色发射, 最强峰位于599 nm, 属于Sm³⁺的⁴G_5/2→⁶H_7/2跃迁.     

碱金属离子,Gd3+,Ce3+共掺杂的Lu3Al5O12陶瓷粉体的光学性能

用高温固相法制备了(Gd_xM_yLu_0.99-x-y)₃Al₅O₁₂:1%Ce³⁺(x=0,0.01,0.25,0.5,0.75,y=0,0.005,0.01,0.02,0.05,0.1,M=Li⁺,Na⁺,K⁺,Cs⁺)系列陶瓷粉体。X射线衍射仪对合成粉末微结构进行表征,FLS920光谱仪测量样品的激发光谱、发射光谱和荧光寿命,CIE色度系统分析合成材料的色坐标。X射线衍射仪结果显示,不同浓度碱金属离子、Gd³⁺、Ce³⁺共掺杂Lu₃Al₅O₁₂样品仍为立方晶相,但随着碱金属离子、Gd³⁺、Ce³⁺掺杂浓度的增加,合成样品衍射峰稍有向小角度偏移。在350 nm激发下,与Lu_2.97Al_5O₁₂:1%Ce³⁺样品相比,共掺杂Gd³⁺后的样品在511 nm附近发射强度降低且出现明显红移,随着Gd³⁺浓度增加,Ce³⁺能级寿命逐渐减小,范围为35~60 ns。与掺杂1%Ce³⁺,1%Gd³⁺样品比较,分别共掺杂2%的Li⁺、Na⁺、K⁺和1%的Cs⁺后样品发光强度提高了5.1倍,2.93倍,1.79倍,1.28倍,同时样品中Ce³⁺寿命继续减小。分别在λ=254.0 nm和λ=365.0 nm紫外灯照射下,随着Gd³⁺掺杂浓度的增加,观察到合成样品从深黄绿色变化为暗红色,色坐标显示样品发光由黄绿光区逐渐移动到红光区域,且共掺杂碱金属离子后,粉体的发光更亮。     

Li+离子掺杂对红色发光材料Y2(W,Mo)O6:Eu3+发光性能的影响

采用高温固相法制备了荧光粉Y2-x(W,Mo)O6:Eu3+,xLi+,利用X射线衍射仪和电子扫描显微镜对样品的结构和形貌进行了表征,并利用荧光光谱法分析了样品的光谱特性.首先在Y2WO6中掺入少量的Mo6+离子,掺入Mo6+后增加了原Y2WO6:Eu3+的激发光谱在近紫外光区的吸收,扩展了激发光谱的谱宽,但却使Y2W...     

低温燃烧法制备SrMgAl10O17：Eu2+,Er3+高亮度蓝光荧光粉及发光性能研究

采用低温燃烧法合成SrMgAl₁₀O₁₇:Eu²⁺及SrMgAl₁₀O₁₇:Eu²⁺, Er³⁺蓝色发光材料, 通过X射线衍射仪 (XRD)、扫描电子显微镜 (SEM) 和荧光光谱仪 (PL) 等测试手段对所得样品进行表征. XRD及SEM测试结果表明: 利用低温燃烧法合成SrMgAl₁₀O₁₇材料具有较高的结晶度, 且微量的稀土元素掺杂不会破坏其晶体结构; PL测试结果表明: SrMgAl₁₀O₁₇:Eu²⁺ 荧光粉在300–390 nm范围内可以被有效的激发, 该波长范围与近紫外LED芯片匹配, 发射光谱分布在430–520 nm之间, 发射峰位于460 nm, 属蓝光发射材料. 共掺Er³⁺可显著增强SrMgAl₁₀O₁₇:Eu²⁺的发光强度, 且当Er³⁺的掺杂浓度为4%时,样品的发光强度最大, 较单掺Eu²⁺时样品的发光强度高出54.9%, 表明Er³⁺对Eu²⁺的发光具有良好的敏化作用, 该敏化作用的机理可以利用能量传递原理进行解释. 关键词： 低温燃烧法 10O₁₇')" href="#">SrMgAl₁₀O₁₇ 蓝光荧光粉 敏化作用     

Effects of cation- or oxide ion-defect on conductivities of apatite-type La–Ge–O system ceramics

A series of apatite-type La–Ge–O ceramics were prepared and their cation-defect at the 4f+6h sites and oxide ion-defect at 2a site were investigated. In La_xGe₆O_12+1.5x ceramics of x=6–12, the higher conductivities were obtained in the region of apatite composition, La_x(GeO₄)₆O_1.5x−12 (x=8–9.33), and the highest conductivity was achieved for La₉(GeO₄)₆O_1.5 (x=9), where the number of cation (La³⁺) occupying the 4f+6h sites is 9 and the number of oxide ion occupying the 2a site is 1.5. The ceramics with cation- and oxide ion-defects were La_9−0.66xSr_x(GeO₄)₆O_1.5 (x=0–1), La_9−1.33xZr_x(GeO₄)₆O_1.5 (x=0–1), La_9−xSr_x(GeO₄)₆O_1.5−0.5x (x=0–3), La_9−xZr_x(GeO₄)₆O_1.5+0.5x (x=0–1), La_x(GeO₄)_3x−21(AsO₄)_27−3xO_1.5 (x=0–3), La_x(GeO₄)_33−3x(AlO₄)_3x−27O_1.5 (x=0–3), La₉(GeO₄)_6−x (AlO₄)_xO_1.5−0.5x (x=0–3), La₉(GeO₄)_6−x(AsO₄)_xO_1.5+0.5x (x=0–1), La_9.33−xSr_x(GeO₄)₆O_2−0.5x (x=0–1.2) and La_x(GeO₄)_4.5(AlO₄)_1.5O_1.5x−12.75 (x=8.8–9.83), which were prepared by the partial substitution of La³⁺and GeO₄⁴⁻of the basic apatite La₉(GeO₄)₆O_1.5 with Sr²⁺ or Zr⁴⁺ and AlO₄⁵⁻ or AsO₄³⁻. Such substitutions lowered the conductivity of La₉(GeO₄)₆O_1.5. These results were discussed by the electrostatic interaction between Sr²⁺, Zr⁴⁺, AlO₄⁵⁻ or AsO₄³⁻ and oxide ion as a conductive species.     

Li+离子掺杂Gd2O3：Sm3+纳米晶的发光增强

采用燃烧法制备了Gd₂O₃:Sm³⁺和Li⁺离子掺杂的Gd₂O₃:Sm³⁺纳米晶,根据X射线衍射图谱确定所得纳米样品为纯立方相。在室温下,用275 nm和980 nm激发光激发各样品时,可分别观测到Sm³⁺离子的强荧光发射和上转换特征发射,其主发射峰分别位于560,602,650 nm处,分别对应着Sm³⁺离子的⁴G_5/2→⁶H_5/2,⁴G_5/2→⁶H_7/2和⁴G_5/2→⁶H_9/2的电子跃迁,其中以⁴G_5/2→⁶H_7/2跃迁的光谱强度最大。实验表明Li⁺离子的掺入使得Sm³⁺离子的荧光发射强度显著增加。通过对样品的XRD、TEM和激发光谱、发射光谱的研究,分析了引起样品荧光强度变化的原因。     

Al~(3+)掺杂ScVO_4∶Eu~(3+),Bi~(3+)荧光粉的制备及发光性质

采用高温固相法在1 000℃下煅烧6 h合成了Sc VO4∶Eu3+,Bi3+,Al3+荧光粉。使用X射线粉末衍射仪和扫描电镜对样品的结构和形貌进行了表征,采用荧光分光光度计研究了样品的发光性质。用315 nm波长激发Sc VO4∶Eu3+,Bi3+,Al3+样品时,样品在590~620 nm范围内发射强烈的橙红光,最大发射峰位于615nm。少量Al3+的掺入可以增强Sc VO4∶Eu3+,Bi3+荧光粉的发光,而掺入过量Al3+时会使Sc VO4∶Eu3+,Bi3+荧光粉的发光变弱。当Al3+在Sc VO4∶Eu3+,Bi3+中的摩尔分数达到4%时,样品的发光最强且其发光强度较未掺杂Al3+的样品提高了约30%。     

Er3+单掺、Er3+/Yb3+共掺杂Ca12Al14O32F2的 制备及上转换发光性质

利用高温固相法成功制备了Er~(3+)单掺、Er~(3+)/Yb~(3+)共掺杂Ca_(12)Al_(14)O_(32)F_2上转换发光样品。在980 nm激光激发下,Er~(3+)单掺和Er~(3+)/Yb~(3+)共掺杂样品均呈现出较强的绿光(528,549 nm)和较弱的红光(655 nm)发射,分别归因于Er~(3+)离子的~2H_(11/2),~4S_(3/2)→~4I_(15/2)和~4F_(9/2)→~4I_(15/2)能级跃迁。随着Er离子浓度的增加,单掺杂样品上转换发光强度先增大后减小,最佳掺杂浓度为0.8%。共掺杂Yb~(3+)后,Er~(3+)的发光强度明显增大。还原气氛下合成的样品上转换发光强度增大约两倍,可能和笼中阴离子基团变化有关。发光强度和激发光功率的关系表明所得上转换发射为双光子吸收过程,借助Er~(3+)-Yb~(3+)体系能级结构详细讨论了上转换发射的跃迁机制。